- 29 Aug, 2019 40 commits
-
-
ZhangXiaoxu authored
commit ae148243 upstream. In commit 6096d91a ("dm space map metadata: fix occasional leak of a metadata block on resize"), we refactor the commit logic to a new function 'apply_bops'. But when that logic was replaced in out() the return value was not stored. This may lead out() returning a wrong value to the caller. Fixes: 6096d91a ("dm space map metadata: fix occasional leak of a metadata block on resize") Cc: stable@vger.kernel.org Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wenwen Wang authored
commit dc1a3e8e upstream. If rs_prepare_reshape() fails, no cleanup is executed, leading to leak of the raid_set structure allocated at the beginning of raid_ctr(). To fix this issue, go to the label 'bad' if the error occurs. Fixes: 11e47232 ("dm raid: stop keeping raid set frozen altogether") Cc: stable@vger.kernel.org Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Mikulas Patocka authored
commit 5729b6e5 upstream. Fix a crash that was introduced by the commit 724376a0. The crash is reported here: https://gitlab.com/cryptsetup/cryptsetup/issues/468 When reading from the integrity device, the function dm_integrity_map_continue calls find_journal_node to find out if the location to read is present in the journal. Then, it calculates how many sectors are consecutively stored in the journal. Then, it locks the range with add_new_range and wait_and_add_new_range. The problem is that during wait_and_add_new_range, we hold no locks (we don't hold ic->endio_wait.lock and we don't hold a range lock), so the journal may change arbitrarily while wait_and_add_new_range sleeps. The code then goes to __journal_read_write and hits BUG_ON(journal_entry_get_sector(je) != logical_sector); because the journal has changed. In order to fix this bug, we need to re-check the journal location after wait_and_add_new_range. We restrict the length to one block in order to not complicate the code too much. Fixes: 724376a0 ("dm integrity: implement fair range locks") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
ZhangXiaoxu authored
commit e4f9d601 upstream. When btree_split_beneath() splits a node to two new children, it will allocate two blocks: left and right. If right block's allocation failed, the left block will be unlocked and marked dirty. If this happened, the left block'ss content is zero, because it wasn't initialized with the btree struct before the attempot to allocate the right block. Upon return, when flushing the left block to disk, the validator will fail when check this block. Then a BUG_ON is raised. Fix this by completely initializing the left block before allocating and initializing the right block. Fixes: 4dcb8b57 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path") Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Fomichev authored
commit d1fef414 upstream. This patch fixes a problem in dm-kcopyd that may leave jobs in complete queue indefinitely in the event of backing storage failure. This behavior has been observed while running 100% write file fio workload against an XFS volume created on top of a dm-zoned target device. If the underlying storage of dm-zoned goes to offline state under I/O, kcopyd sometimes never issues the end copy callback and dm-zoned reclaim work hangs indefinitely waiting for that completion. This behavior was traced down to the error handling code in process_jobs() function that places the failed job to complete_jobs queue, but doesn't wake up the job handler. In case of backing device failure, all outstanding jobs may end up going to complete_jobs queue via this code path and then stay there forever because there are no more successful I/O jobs to wake up the job handler. This patch adds a wake() call to always wake up kcopyd job wait queue for all I/O jobs that fail before dm_io() gets called for that job. The patch also sets the write error status in all sub jobs that are failed because their master job has failed. Fixes: b73c67c2 ("dm kcopyd: add sequential write feature") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
John Hubbard authored
commit 7846f58f upstream. commit a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") had two errors: * It preserved boot_params.acpi_rsdp_addr, and * It failed to preserve boot_params.hdr Therefore, zero out acpi_rsdp_addr, and preserve hdr. Fixes: a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") Reported-by:
Neil MacLeod <neil@nmacleod.com> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
John Hubbard authored
commit a90118c4 upstream. Recent gcc compilers (gcc 9.1) generate warnings about an out of bounds memset, if the memset goes accross several fields of a struct. This generated a couple of warnings on x86_64 builds in sanitize_boot_params(). Fix this by explicitly saving the fields in struct boot_params that are intended to be preserved, and zeroing all the rest. [ tglx: Tagged for stable as it breaks the warning free build there as well ] Suggested-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Tom Lendacky authored
commit c49a0a80 upstream. There have been reports of RDRAND issues after resuming from suspend on some AMD family 15h and family 16h systems. This issue stems from a BIOS not performing the proper steps during resume to ensure RDRAND continues to function properly. RDRAND support is indicated by CPUID Fn00000001_ECX[30]. This bit can be reset by clearing MSR C001_1004[62]. Any software that checks for RDRAND support using CPUID, including the kernel, will believe that RDRAND is not supported. Update the CPU initialization to clear the RDRAND CPUID bit for any family 15h and 16h processor that supports RDRAND. If it is known that the family 15h or family 16h system does not have an RDRAND resume issue or that the system will not be placed in suspend, the "rdrand=force" kernel parameter can be used to stop the clearing of the RDRAND CPUID bit. Additionally, update the suspend and resume path to save and restore the MSR C001_1004 value to ensure that the RDRAND CPUID setting remains in place after resuming from suspend. Note, that clearing the RDRAND CPUID bit does not prevent a processor that normally supports the RDRAND instruction from executing it. So any code that determined the support based on family and model won't #UD. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chen Yu <yu.c.chen@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org> Cc: "linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "x86@kernel.org" <x86@kernel.org> Link: https://lkml.kernel.org/r/7543af91666f491547bd86cebb1e17c66824ab9f.1566229943.git.thomas.lendacky@amd.comSigned-off-by:
-
Thomas Gleixner authored
commit f897e60a upstream. Some newer machines do not advertise legacy timers. The kernel can handle that situation if the TSC and the CPU frequency are enumerated by CPUID or MSRs and the CPU supports TSC deadline timer. If the CPU does not support TSC deadline timer the local APIC timer frequency has to be known as well. Some Ryzens machines do not advertize legacy timers, but there is no reliable way to determine the bus frequency which feeds the local APIC timer when the machine allows overclocking of that frequency. As there is no legacy timer the local APIC timer calibration crashes due to a NULL pointer dereference when accessing the not installed global clock event device. Switch the calibration loop to a non interrupt based one, which polls either TSC (if frequency is known) or jiffies. The latter requires a global clockevent. As the machines which do not have a global clockevent installed have a known TSC frequency this is a non issue. For older machines where TSC frequency is not known, there is no known case where the legacy timers do not exist as that would have been reported long ago. Reported-by:
Daniel Drake <drake@endlessm.com> Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Sean Christopherson authored
commit b63f20a7 upstream. Use 'lea' instead of 'add' when adjusting %rsp in CALL_NOSPEC so as to avoid clobbering flags. KVM's emulator makes indirect calls into a jump table of sorts, where the destination of the CALL_NOSPEC is a small blob of code that performs fast emulation by executing the target instruction with fixed operands. adcb_al_dl: 0x000339f8 <+0>: adc %dl,%al 0x000339fa <+2>: ret A major motiviation for doing fast emulation is to leverage the CPU to handle consumption and manipulation of arithmetic flags, i.e. RFLAGS is both an input and output to the target of CALL_NOSPEC. Clobbering flags results in all sorts of incorrect emulation, e.g. Jcc instructions often take the wrong path. Sans the nops... asm("push %[flags]; popf; " CALL_NOSPEC " ; pushf; pop %[flags]\n" 0x0003595a <+58>: mov 0xc0(%ebx),%eax 0x00035960 <+64>: mov 0x60(%ebx),%edx 0x00035963 <+67>: mov 0x90(%ebx),%ecx 0x00035969 <+73>: push %edi 0x0003596a <+74>: popf 0x0003596b <+75>: call *%esi 0x000359a0 <+128>: pushf 0x000359a1 <+129>: pop %edi 0x000359a2 <+130>: mov %eax,0xc0(%ebx) 0x000359b1 <+145>: mov %edx,0x60(%ebx) ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK); 0x000359a8 <+136>: mov -0x10(%ebp),%eax 0x000359ab <+139>: and $0x8d5,%edi 0x000359b4 <+148>: and $0xfffff72a,%eax 0x000359b9 <+153>: or %eax,%edi 0x000359bd <+157>: mov %edi,0x4(%ebx) For the most part this has gone unnoticed as emulation of guest code that can trigger fast emulation is effectively limited to MMIO when running on modern hardware, and MMIO is rarely, if ever, accessed by instructions that affect or consume flags. Breakage is almost instantaneous when running with unrestricted guest disabled, in which case KVM must emulate all instructions when the guest has invalid state, e.g. when the guest is in Big Real Mode during early BIOS. Fixes: 776b043848fd2 ("x86/retpoline: Add initial retpoline support") Fixes: 1a29b5b7 ("KVM: x86: Make indirect calls in emulator speculation safe") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190822211122.27579-1-sean.j.christopherson@intel.comSigned-off-by:
-
Oleg Nesterov authored
commit 46d0b24c upstream. userfaultfd_release() should clear vm_flags/vm_userfaultfd_ctx even if mm->core_state != NULL. Otherwise a page fault can see userfaultfd_missing() == T and use an already freed userfaultfd_ctx. Link: http://lkml.kernel.org/r/20190820160237.GB4983@redhat.com Fixes: 04f5866e ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping") Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dexuan Cui authored
commit a9fc4340 upstream. In the case of X86_PAE, unsigned long is u32, but the physical address type should be u64. Due to the bug here, the netvsc driver can not load successfully, and sometimes the VM can panic due to memory corruption (the hypervisor writes data to the wrong location). Fixes: 6ba34171 ("Drivers: hv: vmbus: Remove use of slow_virt_to_phys()") Cc: stable@vger.kernel.org Cc: Michael Kelley <mikelley@microsoft.com> Reported-and-tested-by:
Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Bartosz Golaszewski authored
commit 2c60e6b5 upstream. If the driver doesn't support open-drain/source config options, we emulate this behavior when setting the direction by calling gpiod_direction_input() if the default value is 0 (open-source) or 1 (open-drain), thus not actively driving the line in those cases. This however clears the FLAG_IS_OUT bit for the GPIO line descriptor and makes the LINEINFO ioctl() incorrectly report this line's mode as 'input' to user-space. This commit modifies the ioctl() to always set the GPIOLINE_FLAG_IS_OUT bit in the lineinfo structure's flags field. Since it's impossible to use the input mode and open-drain/source options at the same time, we can be sure the reported information will be correct. Fixes: 521a2ad6 ("gpio: add userspace ABI for GPIO line information") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190806114151.17652-1-brgl@bgdev.plSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Lyude Paul authored
commit c358ebf5 upstream. While I had thought I had fixed this issue in: commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") It turns out that while I did fix the error messages I was seeing on my P50 when trying to access i2c busses with the GPU in runtime suspend, I accidentally had missed one important detail that was mentioned on the bug report this commit was supposed to fix: that the CPU would only lock up when trying to access i2c busses _on connected devices_ _while the GPU is not in runtime suspend_. Whoops. That definitely explains why I was not able to get my machine to hang with i2c bus interactions until now, as plugging my P50 into it's dock with an HDMI monitor connected allowed me to finally reproduce this locally. Now that I have managed to reproduce this issue properly, it looks like the problem is much simpler then it looks. It turns out that some connected devices, such as MST laptop docks, will actually ACK i2c reads even if no data was actually read: [ 275.063043] nouveau 0000:01:00.0: i2c: aux 000a: 1: 0000004c 1 [ 275.063447] nouveau 0000:01:00.0: i2c: aux 000a: 00 01101000 10040000 [ 275.063759] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000001 [ 275.064024] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 [ 275.064285] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 [ 275.064594] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 Because we don't handle the situation of i2c ack without any data, we end up entering an infinite loop in nvkm_i2c_aux_i2c_xfer() since the value of cnt always remains at 0. This finally properly explains how this could result in a CPU hang like the ones observed in the aforementioned commit. So, fix this by retrying transactions if no data is written or received, and give up and fail the transaction if we continue to not write or receive any data after 32 retries. Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit a5613724 upstream. We can't rely on ->peer_features in calc_target() because it may be called both when the OSD session is established and open and when it's not. ->peer_features is not valid unless the OSD session is open. If this happens on a PG split (pg_num increase), that could mean we don't resend a request that should have been resent, hanging the client indefinitely. In userspace this was fixed by looking at require_osd_release and get_xinfo[osd].features fields of the osdmap. However these fields belong to the OSD section of the osdmap, which the kernel doesn't decode (only the client section is decoded). Instead, let's drop this feature check. It effectively checks for luminous, so only pre-luminous OSDs would be affected in that on a PG split the kernel might resend a request that should not have been resent. Duplicates can occur in other scenarios, so both sides should already be prepared for them: see dup/replay logic on the OSD side and retry_attempt check on the client side. Cc: stable@vger.kernel.org Fixes: 7de030d6 ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT") Link: https://tracker.ceph.com/issues/41162Reported-by:
Jerry Lee <leisurelysw24@gmail.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Tested-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Jeff Layton authored
commit 28a28261 upstream. When ceph_mdsc_do_request returns an error, we can't assume that the filelock_reply pointer will be set. Only try to fetch fields out of the r_reply_info when it returns success. Cc: stable@vger.kernel.org Reported-by:
Hector Martin <hector@marcansoft.com> Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
-
Erqi Chen authored
commit c95f1c5f upstream. clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage(). invalidatepage() clears page's private flag, if dirty flag is not cleared, the page may cause BUG_ON failure in ceph_set_page_dirty(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/40862Signed-off-by:
Erqi Chen <chenerqi@gmail.com> Reviewed-by:
-
Dinh Nguyen authored
commit c7ec75ea upstream. Checking bypass_reg is incorrect for calculating the cnt_clk rates. Instead we should be checking that there is a proper hardware register that holds the clock divider. Cc: stable@vger.kernel.org Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Link: https://lkml.kernel.org/r/20190814153014.12962-1-dinguyen@kernel.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Mikulas Patocka authored
commit cf3591ef upstream. Revert the commit bd293d07. The proper fix has been made available with commit d0a255e7 ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d07 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by:
-
Jason Gerecke authored
commit b72fb1dc upstream. Distance values reported by 2nd-gen Intuos tablets are on an inverted scale (0 == far, 63 == near). We need to change them over to a normal scale before reporting to userspace or else userspace drivers and applications can get confused. Ref: https://github.com/linuxwacom/input-wacom/issues/98 Fixes: eda01dab ("HID: wacom: Add four new Intuos devices") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Aaron Armstrong Skomra authored
commit fcf887e7 upstream. The EKR ring claims a range of 0 to 71 but actually reports values 1 to 72. The ring is used in relative mode so this change should not affect users. Signed-off-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Fixes: 72b236d6 ("HID: wacom: Add support for Express Key Remote.") Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Reviewed-by:
-
Naresh Kamboju authored
[ Upstream commit c096397c ] selftests kvm test cases need pre-required kernel configs for the test to get pass. Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit c69509c7 ] At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 03fdfb26 ] At the moment, the way we reset system registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a system register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. This requires fixing a couple of sysreg refinition in the trap table. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the sysregs leave outside of the sys_regs[] array). It may well be axed in the near future. Tested-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Jin Yao authored
[ Upstream commit 8e6e5bea ] The events defined in pmu-events JSON are parsed and added into perf tool. For fixed counters, we handle the encodings between JSON and perf by using a static array fixed[]. But the fixed[] has missed an important event "cpu_clk_unhalted.core". For example, on the Tremont platform, [root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a event syntax error: 'cpu_clk_unhalted.core' \___ parser error With this patch, the event cpu_clk_unhalted.core can be parsed. [root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv ------------------------------------------------------------ perf_event_attr: type 4 size 112 config 0x3c sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ ... Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190729072755.2166-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
He Zhe authored
[ Upstream commit 5f5e25f1 ] cpu_map__snprint_mask() would write to illegal memory pointed by zalloc(0) when there is only one cpu. This patch fixes the calculation and adds sanity check against the input parameters. Signed-off-by:
He Zhe <zhe.he@windriver.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Fixes: 4400ac8a ("perf cpumap: Introduce cpu_map__snprint_mask()") Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.comSigned-off-by:
-
He Zhe authored
[ Upstream commit cf30ae72 ] The buffer containing the string used to set cpumask is overwritten at the end of the string later in cpu_map__snprint_mask due to not enough memory space, when there is only one cpu. And thus causes the following failure: $ perf ftrace ls failed to reset ftrace $ This patch fixes the calculation of the cpumask string size. Signed-off-by:
-
Paolo Valente authored
[ Upstream commit fd03177c ] As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Hsin-Yi Wang <hsinyi@google.com> Reviewed-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 6b7c3b86 ] Currently when too many retries have occurred there is a memory leak on the allocation for reply on the error return path. Fix this by kfree'ing reply before returning. Addresses-Coverity: ("Resource leak") Fixes: a9cd9c04 ("drm/vmwgfx: Add a check to handle host message failure") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Valdis Klētnieks authored
[ Upstream commit 04f5bda8 ] When building with W=1, warnings about missing prototypes are emitted: CC arch/x86/lib/cpu.o arch/x86/lib/cpu.c:5:14: warning: no previous prototype for 'x86_family' [-Wmissing-prototypes] 5 | unsigned int x86_family(unsigned int sig) | ^~~~~~~~~~ arch/x86/lib/cpu.c:18:14: warning: no previous prototype for 'x86_model' [-Wmissing-prototypes] 18 | unsigned int x86_model(unsigned int sig) | ^~~~~~~~~ arch/x86/lib/cpu.c:33:14: warning: no previous prototype for 'x86_stepping' [-Wmissing-prototypes] 33 | unsigned int x86_stepping(unsigned int sig) | ^~~~~~~~~~~~ Add the proper include file so the prototypes are there. Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
Jens Axboe authored
[ Upstream commit 752ead44 ] Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Jens Axboe authored
[ Upstream commit 2d727150 ] For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by:
Krishna Ram Prakash R <krp@gtux.in> Reviewed-by:
-
Jiangfeng Xiao authored
[ Upstream commit 96a50c0d ] On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by:
Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiangfeng Xiao authored
[ Upstream commit f2243b82 ] TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by:
-
Jiangfeng Xiao authored
[ Upstream commit 1a2c070a ] If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 4a6a1385 ] Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit e8df7e8c ] When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit debea2cd ] A call to 'kfree_skb()' is missing in the error handling path of 'init_one()'. This is already present in 'remove_one()' but is missing here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 24350fda ] Perf relies on _etext and _stext symbols being one of 't', 'T', 'v' or 'V'. Put them into .text section to guarantee that. Also moves padding to page boundary inside .text which has an effect that .text section is now padded with nops rather than 0's, which apparently has been the initial intention for specifying 0x0700 fill expression. Reported-by:
Thomas Richter <tmricht@linux.ibm.com> Tested-by:
Andreas Krebbel <krebbel@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Sebastien Tisserant authored
[ Upstream commit ee9d6618 ] Fix kernel oops when mounting a encryptData CIFS share with CONFIG_DEBUG_VIRTUAL Signed-off-by:
Sebastien Tisserant <stisserant@wallix.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
