- 18 Sep, 2022 40 commits
-
-
Dmitry Baryshkov authored
Complete the move of DSC data pointer from struct drm_panel to struct mipi_dsi_device. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493309/ Link: https://lore.kernel.org/r/20220711094320.368062-4-dmitry.baryshkov@linaro.orgSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Dmitry Baryshkov authored
Now that struct mipi_dsi_device provides DSC data, fetch it from the mentioned struct rather than from the struct drm_panel itself. This would allow supporting MIPI DSI bridges handling DSC on their input side. Signed-off-by:
-
Dmitry Baryshkov authored
The commit 0f40ba48 ("drm/msm/dsi: Pass DSC params to drm_panel") added a pointer to the DSC data to the struct drm_panel. However DSC support is not limited to the DSI panels. MIPI DSI bridges can also consume DSC command streams. Thus add struct drm_dsc_config pointer to the struct mipi_dsi_device. Signed-off-by:
-
ye xingchen authored
Return the value msm_dsi_phy_enable() directly instead of storing it in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by:
-
Dmitry Baryshkov authored
It makes no sense to have the HPD worker in the MSM DSI driver anymore. It is only queued from the dsi_host_attach/detach() callbacks, where it plays no useful role. Either way the panel or next bridge will be present and will report it's status directly. Signed-off-by:
-
Douglas Anderson authored
The dsi_phy_driver_probe() function has a "goto fail" for no reason. Change it to just always return directly when it sees an error. Make this simpler by leveraging dev_err_probe() which is designed to make code like this shorter / simpler. NOTE: as part of this, we now pass through error codes directly from msm_ioremap_size() rather than translating to -ENOMEM. This changed mostly because it's much more convenient when using dev_err_probe() and also it's usually encouraged not to hide error codes like the old code was doing unless there is a good reason. I can't see any reason why we'd need to return -ENOMEM instead of -EINVAL from the probe function. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Douglas Anderson authored
As of the commit 1de452a0 ("regulator: core: Allow drivers to define their init data as const") we no longer need to do copying of regulator bulk data from initdata to something dynamic. Let's take advantage of that. In addition to saving some code, this also moves us to using ARRAY_SIZE() to specify how many regulators we have which is less error prone. This gets rid of some layers of wrappers which makes it obvious that we can get rid of an extra error print. devm_regulator_bulk_get_const() prints errors for you so you don't need an extra layer of printing. In all cases here I have preserved the old settings without any investigation about whether the loads being set are sensible. In the cases of some of the PHYs if several PHYs in the same file used exactly the same settings I had them point to the same data structure. NOTE: Though I haven't done the math, this is likely an overall savings in terms of "static const" data. We previously always allocated space for 8 supplies. Each of these supplies took up 36 bytes of data (32 for name, 4 for an int). Signed-off-by:
-
Douglas Anderson authored
As of commit 6eabfc01 ("regulator: core: Allow specifying an initial load w/ the bulk API") we can now specify the initial load in the bulk data rather than having to manually call regulator_set_load() on each regulator. Let's use it. Signed-off-by:
-
Douglas Anderson authored
As of commit 5451781d ("regulator: core: Only count load for enabled consumers"), a load isn't counted for a disabled regulator. That means all the code in the DSI driver to specify and set loads before disabling a regulator is not actually doing anything useful. Let's remove it. It should be noted that all of the loads set that were being specified were pointless noise anyway. The only use for this number is to pick between low power and high power modes of regulators. Regulators appear to do this changeover at loads on the order of 10000 uA. You would need a lot of clients of the same rail for that 100 uA number to count for anything. Note that now that we get rid of the setting of the load at disable time, we can just set the load once when we first get the regulator and then forget it. It should also be noted that the regulator functions regulator_bulk_enable() and regulator_set_load() already print error messages when they encounter problems so while moving things around we get rid of some extra error prints. Signed-off-by:
-
Marijn Suijten authored
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
-
Marijn Suijten authored
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by:
-
Marijn Suijten authored
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by:
-
Marijn Suijten authored
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by:
-
Marijn Suijten authored
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by:
-
Marijn Suijten authored
Now that the last DSI PHY PLL driver (dsi_phy_28nm_8960) has been converted to use a simple stack-local char-array instead of a devm_kzalloc heap allocation we can safely call sizeof() on every string variable (that's now a sized array instead of a pointer) passed into snprintf instead of hardcoding the size. Signed-off-by:
-
Marijn Suijten authored
The clock names formatted into the hw_clk's init structure are only used for the duration of the registration function where they are kstrdup'ed, making it unnecessary to keep the allocations alive for the duration of the device (through devm). Just like the other DSI PHY PLL clock trees, use a stack-local char array and save on memory outside of the pll_28nm_register function. Signed-off-by:
-
Marijn Suijten authored
The commit 613cbd1d ("drm/msm/dsi: use devm_clk_*register to registe DSI PHY clocks") introduced the devm_ prefix to clk_hw registration calls, without updating the indentation of the arguments on the following lines. Similarly commit e55b3fbb ("drm/msm/dsi: drop PLL accessor functions") moved from pll_write to dsi_phy_write without updating the indentation of followup arguments either. Preparing for a series that heavily touches the clk calls, reflow and reindent function calls that are adhering to an 80-char column limit by spanning multiple lines. Where function names are very long the arguments are indented with a fixed number of two tab characters instead of aligning with the opening parenthesis of the function call. Signed-off-by:
-
Kuogee Hsieh authored
At current implementation there is an extra 0 at 1.62G link rate which cause no correct pixel_div selected for 1.62G link rate to calculate mvid and nvid. This patch delete the extra 0 to have mvid and nvid be calculated correctly. Changes in v2: -- fix Fixes tag's text Changes in v3: -- fix misspelling of "Reviewed-by" Fixes: 937f941c ("drm/msm/dp: Use qmp phy for DP PLL and PHY") Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Stephen Boyd authored
Build robots complain smatch warnings: drivers/gpu/drm/msm/dp/dp_link.c:969 dp_link_process_link_status_update() warn: inconsistent indenting Fix it along with a trailing space from the same commit. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Fixes: ea530388 ("drm/msm/dp: skip checking LINK_STATUS_UPDATED bit") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Dmitry Baryshkov authored
The #sound-dai-cells property should be used only for DP controllers. It doesn't make sense for eDP, there is no support for audio output. The aux-bus should not be used for DP controllers. Also p1 MMIO region should be used only for DP controllers. Take care of these differences. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Dmitry Baryshkov authored
Document missing definitions for opp-table (DP controller OPPs), aux-bus (DP AUX BUS) and data-lanes (DP/eDP lanes mapping) properties. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Dmitry Baryshkov authored
The commit 85936d4f ("phy: qcom-qmp: add regulator_set_load to dp phy") moved setting regulator load to the DP PHY driver (QMP). Then, the commit 7516351b ("drm/msm/dp: delete vdda regulator related functions from eDP/DP controller") removed support for VDDA supplies from the DP controller driver. Mark these properties as deprecated and drop them from the example. Acked-by:
-
Stephen Boyd authored
This API isn't really more than a couple lines now that we don't store the pixel_rate to the struct member. Inline it into the caller. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
This struct member is stored to in the function that calls the function which uses it. That's possible with a function argument instead of storing to a struct member. Pass the pixel_rate as an argument instead to simplify the code. Note that dp_ctrl_link_maintenance() was storing the pixel_rate but never using it so we just remove the assignment from there. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
Let's move these functions around to avoid having to forward declare dp_ctrl_on_stream_phy_test_report(). Also remove dp_ctrl_reinitialize_mainlink() forward declaration because we're doing that sort of task. Reviewed-by:
-
Dmitry Baryshkov authored
Instead of querying the CTL for the flush mask (for SSPP, LM or DSPP), storing the mask in the mixer configuration and then pushing the mask to the CTL, tell CTL to cache the flush in place. Signed-off-by:
-
Dmitry Baryshkov authored
There is no need to keep a separate function for calling into the ctl if we already know all the details. Inline this function in the dpu_crtc.c Signed-off-by:
-
Dmitry Baryshkov authored
Stop limiting zpos property values, we use normalized_zpos anyway. And nothing stops userspace from assigning several planes to a single zpos (it is a userspace bug, but the kernel is forgiving about it). Signed-off-by:
-
Dmitry Baryshkov authored
Master/virtual planes were used for multirect support. In preparation to reworking DPU planes, drop support for master planes (which was not used anyway). Signed-off-by:
-
Dmitry Baryshkov authored
Follow up the merge of address fields and drop the variable that became unused after the commit 9403f9a4 ("drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_map"). Fixes: 9403f9a4 ("drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_map") Signed-off-by:
-
Javier Martinez Canillas authored
Drivers' .remove and .shutdown callbacks are executed on different code paths. The former is called when a device is removed from the bus, while the latter is called at system shutdown time to quiesce the device. This means that some overlap exists between the two, because both have to take care of properly shutting down the hardware. But currently the logic used in these two callbacks isn't consistent in msm drivers, which could lead to kernel panic. For example, on .remove the component is deleted and its .unbind callback leads to the hardware being shutdown but only if the DRM device has been marked as registered. That check doesn't exist in the .shutdown logic and this can lead to the driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't been properly initialized. A situation like this can happen if drivers for expected sub-devices fail to probe, since the .bind callback will never be executed. If that is the case, drm_atomic_helper_shutdown() will attempt to take mutexes that are only initialized if drm_mode_config_init() is called during a device bind. This bug was attempted to be fixed in commit 623f279c ("drm/msm: fix shutdown hook in case GPU components failed to bind"), but unfortunately it still happens in some cases as the one mentioned above, i.e: systemd-shutdown[1]: Powering off. kvm: exiting hardware virtualization platform wifi-firmware.0: Removing from iommu group 12 platform video-firmware.0: Removing from iommu group 10 ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0 ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0 lr : drm_modeset_lock_all_ctx+0x48/0x3d0 sp : ffff80000805bb80 x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030 x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800 x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0 Call trace: drm_modeset_lock_all_ctx+0x3c4/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 ---[ end trace 0000000000000000 ]--- Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000 [0000000000000018] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ww_mutex_lock+0x28/0x32c lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0 sp : ffff80000805bb50 x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018 x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800 x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018 Call trace: ww_mutex_lock+0x28/0x32c drm_modeset_lock_all_ctx+0x1b0/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Kernel Offset: 0x495d77c00000 from 0xffff800008000000 PHYS_OFFSET: 0xffffcd8500000000 CPU features: 0x800,00c2a015,19801c82 Memory Limit: none ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 9d5cbf5f ("drm/msm: add shutdown support for display platform_driver") Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Jason Wang authored
The double `be' is duplicated in the comment, remove one. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Reviewed-by:
-
Dmitry Baryshkov authored
Drop the dpu_cfg variable and corresponding kzalloc, which became unused after changing hw catalog to static configuration. Fixes: de7d480f ("drm/msm/dpu: make dpu hardware catalog static const") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dmitry Baryshkov authored
We do not expect to have other VBIFs. Drop VBIF_n indices and always use VBIF_RT and VBIF_NRT. Reviewed-by:
-
Dmitry Baryshkov authored
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If the value is NULL, then the function will return 0 instead of a proper return code. Moreover dpu_hw_vbif_init() function can not return NULL. So, replace corresponding IS_ERR_OR_NULL() call with IS_ERR(). Reviewed-by:
-
Dmitry Baryshkov authored
Remove loops over hw_vbif. Instead always VBIF's idx as an index in the array. This fixes an error in dpu_kms_hw_init(), where we fill dpu_kms->hw_vbif[i], but check for an error pointer at dpu_kms->hw_vbif[vbif_idx]. Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
-
Dmitry Baryshkov authored
The commit 6874f48b ("drm/msm: make mdp5/dpu devices master components") changed the MDP5 driver to look for the interconnect paths in the MDSS device rather than in the MDP5 device itself. This was left unnoticed since on my testing devices the interconnects probably didn't reach the sync state. Rather than just using the MDP5 device for ICC path lookups for the MDP5 devices, introduce an additional helper to check both MDP5/DPU and MDSS nodes. This will be helpful for the MDP5->DPU conversion, since the driver will have to check both nodes. Fixes: 6874f48b ("drm/msm: make mdp5/dpu devices master components") Reported-by:
Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 3d7a0dd8 ("dt-bindings: msm: disp: add yaml schemas for DPU bindings") Signed-off-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 57fd4f34 ("dt-bindings: msm: add DT bindings for sc7280") Signed-off-by:
-
Krzysztof Kozlowski authored
The 'display-controller' child (DPU) of Display SubSystem (MDSS) uses opp-table, so reference it which allows restricting DPU schema to fixed list of properties. Fixes: 3d7a0dd8 ("dt-bindings: msm: disp: add yaml schemas for DPU bindings") Signed-off-by:
-
