- 10 Dec, 2018 16 commits
-
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by:
-
Andy Shevchenko authored
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Note, we drop the validation option. This is only used in a deprecated ABI and is mostly wrong as many RTCs will still be valid after 2100. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Andy Shevchenko authored
There are users which print time and date represented by content of struct rtc_time in human readable format. Instead of open coding that each time introduce %ptR[dt][r] specifier. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
- 07 Dec, 2018 1 commit
-
-
Chen-Yu Tsai authored
The register range for the RTC extends beyond 0x54. Use the size from the user manual's memory map instead. Fixes: 9765d2d9 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
- 06 Dec, 2018 8 commits
-
-
Chen-Yu Tsai authored
The bindings have been updated to expose the RTC's internal oscillator, for some SoCs that have it directly feeding the PRCM block. The changes include the index 2 for the clock outputs, as well as the clock output names. This patch adds the internal oscillator to the list of clocks exposed through of_clk_add_hw_provider(), and also have the driver optionally fetch the name of the clock from the device tree if it's available. Tested-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Chen-Yu Tsai authored
There are different variants to the RTC hardware first seen on sun6i (A31). The differences we care about in this driver are the clock rate for the internal oscillator, prescalers, and the presence of an external clock output. This patch adds support for all the known pre-H6 base compatibles using the variants data structure previously introduced. Acked-by:
-
Chen-Yu Tsai authored
Amongst the Allwinner SoCs that have seen some kind of coverage by the linux-sunxi community, whether it be mainline Linux or U-boot support, or just available datasheets, most newer chips use the RTC design first seen in the A31 (sun6i). Overall there have been some minor differences. This patch covers the following: - average clock rate of the internal RC oscillator + presence of fixed and adjustable prescaler for this clock - availability of an external (to the SoC) clock output One major difference regarding the H6 is the 24 MHz crystal is now routed through the RTC, as a digitally compensated oscillator (DCXO). This is not covered in this patch and will be supported later. Other differences are either unrelated to RTC or clock functionality, such as boot or crypto related registers, or the driver simply doesn't use the feature in question. One example of the latter is the calibration function for the RC oscillator. We consider this clock to be very bad and avoid using it. Acked-by: -
Chen-Yu Tsai authored
The RTC's main clock, used internally and exported to the rest of the SoC, is called "LOSC" (low speed oscillator) through the hardware documentation. This patch adds a default name for this clock, in case the device tree does not provide one. This shouldn't happen, but lets play it safe. Acked-by:
-
Chen-Yu Tsai authored
Experiments showed that on at least the H3/H5/A64 the RTC's internal oscillator also feeds the CPUS mux in the PRCM. Export this clock through the device tree, instead of having to use a dummy fixed-clock device node, for the PRCM to consume. This will properly describe the relationship between the clocks. Tested-by:
-
Chen-Yu Tsai authored
The A31 does not have an external clock output directly from the RTC. Instead, it has four muxable clock outputs: three (A, B, C) are controlled from the CCU, and the last (D) is controlled from the PRCM. Deprecate the usage of the external clock output for the A31 compatible. Acked-by:
-
Chen-Yu Tsai authored
While doing Bluetooth enablement for various boards based on various Allwinner SoCs, minor differences in the RTC modules were found. These include a lack of an external clock output (A31), different internal oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage settings (H5/H6), and the presence of miscellaneous registers unrelated to the RTC (A64/R40/H5/H6). The datasheet also describes different number of registers for non-volatile storage, though based on actual experiments the actual number is the same across the board. This patch adds a list of all pre-H6 variants, grouped by the internal oscillator's clock rate, regulator settings, and the presence of the external clock output. Combinations are introduced for the variants that have miscellaneous registers. The RTC block in the H6 also handles the 24 MHz DCXO. This will require more device tree binding changes and will be done later. Acked-by:
-
Chen-Yu Tsai authored
The clock output section for this binding describes the two outputs in the descriptions for both the #clock-cells and clock-output-names properties. Instead of overlapping information that is hard to read, rewrite the clock outputs as a list of indices and descriptions. The properies can reference this list instead. This will also make it easier to add notes or conditions to the clocks, and also for adding new outputs. Acked-by:
-
- 22 Nov, 2018 5 commits
-
-
Baruch Siach authored
The abracon,tc-resistor property value is in kOhm. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Trent Piepho authored
The Linux i2c layer has functions to execute common SMBUS/I2C transactions. The register access code here is identical to the I2C read/write block data routines. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Trent Piepho <tpiepho@impinj.com> Signed-off-by:
-
Christophe JAILLET authored
In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Propagate the error code instead. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Alexandre Belloni authored
Using devm_nvmem_register allows to avoid tracking the nvmem pointer in the rtc_device structure. This ultimately allows to register multiple nvmem devices from an RTC driver. Signed-off-by: -
Alexandre Belloni authored
Use the resource managed variant of nvmem_register(). Signed-off-by:
-
- 14 Nov, 2018 4 commits
-
-
Christophe JAILLET authored
In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Commit e115a2bf has modified more than what is said in the commit message. Reverse part of it znd return an error when needed, as it was previously. Fixes: e115a2bf ("rtc: max77686: stop validating rtc_time in .read_time") Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
(RTC,ALM)YEAR registers of Exynos built-in RTC device contains 3 BCD characters. s3c-rtc driver uses only 2 lower of them and supports years from 2000..2099 range. The third BCD value is typically set to 0, but it looks that handling of it is broken in the hardware. It sometimes defaults to a random (even non-BCD) value. This is not an issue for handling RTCYEAR register, because bcd2bin() properly handles only 8bit values (2 BCD characters, the third one is skipped). The problem is however with ALMYEAR register and proper RTC alarm operation. When YEAREN bit is set for the configured alarm, RTC hardware triggers alarm only when ALMYEAR and RTCYEAR matches. This usually doesn't happen because of the random noise on the third BCD character. Fix this by simply skipping setting ALMYEAR register in alarm configuration. This workaround fixes broken alarm operation on Exynos built-in rtc device. My tests revealed that the issue happens on the following Exynos series: 3250, 4210, 4412, 5250 and 5410. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Maciej W. Rozycki authored
Complement commit 85d77047 ("drivers/rtc/rtc-m41t80.c: propagate error value from smbus functions") and correct the remaining places that fail to propagate the error code from SMBus calls. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> References: 85d77047 ("drivers/rtc/rtc-m41t80.c: propagate error value from smbus functions") Signed-off-by:
-
Maciej W. Rozycki authored
Add the missing adjustment of the month range on alarm reads from the RTC, correcting an issue coming from commit 9c6dfed9 ("rtc: m41t80: add alarm functionality"). The range is 1-12 for hardware and 0-11 for `struct rtc_time', and is already correctly handled on alarm writes to the RTC. It was correct up until commit 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") too, which removed the previous implementation of alarm support. Signed-off-by:
-
- 12 Nov, 2018 4 commits
-
-
Alexandre Belloni authored
devm_rtc_device_unregister is not used by any driver and should not be used by any new driver. Signed-off-by: -
Kuninori Morimoto authored
This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to clean up indentation issues, remove spaces, add missing tabs Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another: drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~ drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false), ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from macro 'PCONFDUMP' .param = a, .display = b, .format = c, .has_arg = d \ ^ 2 warnings generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/144Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
- 04 Nov, 2018 2 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
-
