- 05 Sep, 2014 7 commits
-
-
Oliver Neukum authored
commit d310d05f upstream. usbfs allows user space to pass down an URB which sets URB_SHORT_NOT_OK for output URBs. That causes usbcore to log messages without limit for a nonsensical disallowed combination. The fix is to silently drop the attribute in usbfs. The problem is reported to exist since 3.14 https://www.virtualbox.org/ticket/13085Signed-off-by:
Oliver Neukum <oneukum@suse.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 977dcfdc upstream. This patch fixes a bug in ohci-hcd. When an URB is unlinked, the corresponding Endpoint Descriptor is added to the ed_rm_list and taken off the hardware schedule. Once the ED is no longer visible to the hardware, finish_unlinks() handles the URBs that were unlinked or have completed. If any URBs remain attached to the ED, the ED is added back to the hardware schedule -- but only if the controller is running. This fails when a controller dies. A non-empty ED does not get added back to the hardware schedule and does not remain on the ed_rm_list; ohci-hcd loses track of it. The remaining URBs cannot be unlinked, which causes the USB stack to hang. The patch changes finish_unlinks() so that non-empty EDs remain on the ed_rm_list if the controller isn't running. This requires moving some of the existing code around, to avoid modifying the ED's hardware fields more than once. Signed-off-by:
-
Alan Stern authored
commit 256dbcd8 upstream. The debug routine fill_async_buffer() in ohci-hcd is buggy: It never produces any output because it forgets to initialize the output buffer size. Also, the debug routine ohci_dump() has an unused argument. This patch adds the correct initialization and removes the unused argument. Signed-off-by:
-
Jan Kara authored
commit 410dd3cf upstream. We did not check relocated directory in any way when processing Rock Ridge 'CL' tag. Thus a corrupted isofs image can possibly have a CL entry pointing to another CL entry leading to possibly unbounded recursion in kernel code and thus stack overflow or deadlocks (if there is a loop created from CL entries). Fix the problem by not allowing CL entry to point to a directory entry with CL entry (such use makes no good sense anyway) and by checking whether CL entry doesn't point to itself. Reported-by:
Chris Evans <cevans@google.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit 4ab25786 upstream. There are a few very theoretical off-by-one bugs in report descriptor size checking when performing a pre-parsing fixup. Fix those. Reported-by:
Ben Hawkes <hawkes@google.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit ad3e14d7 upstream. device_index is a char type and the size of paired_dj_deivces is 7 elements, therefore proper bounds checking has to be applied to device_index before it is used. We are currently performing the bounds checking in logi_dj_recv_add_djhid_device(), which is too late, as malicious device could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the problem in one of the report forwarding functions called from logi_dj_raw_event(). Fix this by performing the check at the earliest possible ocasion in logi_dj_raw_event(). Reported-by:
-
Dave Chiluk authored
commit b76fc285 upstream. Stable_kernel_rules should point submitters of network stable patches to the netdev_FAQ.txt as requests for stable network patches should go to netdev first. Signed-off-by:
Dave Chiluk <chiluk@canonical.com> Signed-off-by:
-
- 14 Aug, 2014 33 commits
-
-
Greg Kroah-Hartman authored
-
Dave Chinner authored
commit 110dc24a upstream. The addition of direct formatting of log items into the CIL linear buffer added alignment restrictions that the start of each vector needed to be 64 bit aligned. Hence padding was added in xlog_finish_iovec() to round up the vector length to ensure the next vector started with the correct alignment. This adds a small number of bytes to the size of the linear buffer that is otherwise unused. The issue is that we then use the linear buffer size to determine the log space used by the log item, and this includes the unused space. Hence when we account for space used by the log item, it's more than is actually written into the iclogs, and hence we slowly leak this space. This results on log hangs when reserving space, with threads getting stuck with these stack traces: Call Trace: [<ffffffff81d15989>] schedule+0x29/0x70 [<ffffffff8150d3a2>] xlog_grant_head_wait+0xa2/0x1a0 [<ffffffff8150d55d>] xlog_grant_head_check+0xbd/0x140 [<ffffffff8150ee33>] xfs_log_reserve+0x103/0x220 [<ffffffff814b7f05>] xfs_trans_reserve+0x2f5/0x310 ..... The 4 bytes is significant. Brain Foster did all the hard work in tracking down a reproducable leak to inode chunk allocation (it went away with the ikeep mount option). His rough numbers were that creating 50,000 inodes leaked 11 log blocks. This turns out to be roughly 800 inode chunks or 1600 inode cluster buffers. That works out at roughly 4 bytes per cluster buffer logged, and at that I started looking for a 4 byte leak in the buffer logging code. What I found was that a struct xfs_buf_log_format structure for an inode cluster buffer is 28 bytes in length. This gets rounded up to 32 bytes, but the vector length remains 28 bytes. Hence the CIL ticket reservation is decremented by 32 bytes (via lv->lv_buf_len) for that vector rather than 28 bytes which are written into the log. The fix for this problem is to separately track the bytes used by the log vectors in the item and use that instead of the buffer length when accounting for the log space that will be used by the formatted log item. Again, thanks to Brian Foster for doing all the hard work and long hours to isolate this leak and make finding the bug relatively simple. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Cc: Bill <billstuff2001@sbcglobal.net> Signed-off-by:
-
Andrey Utkin authored
[ Upstream commit 093758e3 ] This commit is a guesswork, but it seems to make sense to drop this break, as otherwise the following line is never executed and becomes dead code. And that following line actually saves the result of local calculation by the pointer given in function argument. So the proposed change makes sense if this code in the whole makes sense (but I am unable to analyze it in the whole). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 4ec1b010 ] The LDC handshake could have been asynchronously triggered after ldc_bind() enables the ldc_rx() receive interrupt-handler (and thus intercepts incoming control packets) and before vio_port_up() calls ldc_connect(). If that is the case, ldc_connect() should return 0 and let the state-machine progress. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Karl Volz <karl.volz@oracle.com> Signed-off-by:
-
Christopher Alexander Tobias Schulze authored
[ Upstream commit fe418231 ] Fix detection of BREAK on sunsab serial console: BREAK detection was only performed when there were also serial characters received simultaneously. To handle all BREAKs correctly, the check for BREAK and the corresponding call to uart_handle_break() must also be done if count == 0, therefore duplicate this code fragment and pull it out of the loop over the received characters. Patch applies to 3.16-rc6. Signed-off-by:
Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by:
-
Christopher Alexander Tobias Schulze authored
[ Upstream commit 5cdceab3 ] Fix regression in bbc i2c temperature and fan control on some Sun systems that causes the driver to refuse to load due to the bbc_i2c_bussel resource not being present on the (second) i2c bus where the temperature sensors and fan control are located. (The check for the number of resources was removed when the driver was ported to a pure OF driver in mid 2008.) Signed-off-by:
-
David S. Miller authored
[ Upstream commit 4ca9a237 ] Based almost entirely upon a patch by Christopher Alexander Tobias Schulze. In commit db64fe02 ("mm: rewrite vmap layer") lazy VMAP tlb flushing was added to the vmalloc layer. This causes problems on sparc64. Sparc64 has two VMAP mapped regions and they are not contiguous with eachother. First we have the malloc mapping area, then another unrelated region, then the vmalloc region. This "another unrelated region" is where the firmware is mapped. If the lazy TLB flushing logic in the vmalloc code triggers after we've had both a module unload and a vfree or similar, it will pass an address range that goes from somewhere inside the malloc region to somewhere inside the vmalloc region, and thus covering the openfirmware area entirely. The sparc64 kernel learns about openfirmware's dynamic mappings in this region early in the boot, and then services TLB misses in this area. But openfirmware has some locked TLB entries which are not mentioned in those dynamic mappings and we should thus not disturb them. These huge lazy TLB flush ranges causes those openfirmware locked TLB entries to be removed, resulting in all kinds of problems including hard hangs and crashes during reboot/reset. Besides causing problems like this, such huge TLB flush ranges are also incredibly inefficient. A plea has been made with the author of the VMAP lazy TLB flushing code, but for now we'll put a safety guard into our flush_tlb_kernel_range() implementation. Since the implementation has become non-trivial, stop defining it as a macro and instead make it a function in a C source file. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 18f38132 ] The assumption was that update_mmu_cache() (and the equivalent for PMDs) would only be called when the PTE being installed will be accessible by the user. This is not true for code paths originating from remove_migration_pte(). There are dire consequences for placing a non-valid PTE into the TSB. The TLB miss frramework assumes thatwhen a TSB entry matches we can just load it into the TLB and return from the TLB miss trap. So if a non-valid PTE is in there, we will deadlock taking the TLB miss over and over, never satisfying the miss. Just exit early from update_mmu_cache() and friends in this situation. Based upon a report and patch from Christopher Alexander Tobias Schulze. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5aa4ecfd ] This is the prevent previous stores from overlapping the block stores done by the memcpy loop. Based upon a glibc patch by Jose E. Marchesi Signed-off-by:
-
David S. Miller authored
[ Upstream commit b18eb2d7 ] Access to the TSB hash tables during TLB misses requires that there be an atomic 128-bit quad load available so that we fetch a matching TAG and DATA field at the same time. On cpus prior to UltraSPARC-III only virtual address based quad loads are available. UltraSPARC-III and later provide physical address based variants which are easier to use. When we only have virtual address based quad loads available this means that we have to lock the TSB into the TLB at a fixed virtual address on each cpu when it runs that process. We can't just access the PAGE_OFFSET based aliased mapping of these TSBs because we cannot take a recursive TLB miss inside of the TLB miss handler without risking running out of hardware trap levels (some trap combinations can be deep, such as those generated by register window spill and fill traps). Without huge pages it's working perfectly fine, but when the huge TSB got added another chunk of fixed virtual address space was not allocated for this second TSB mapping. So we were mapping both the 8K and 4MB TSBs to the same exact virtual address, causing multiple TLB matches which gives undefined behavior. Signed-off-by:
-
David S. Miller authored
[ Upstream commit e5c460f4 ] This was found using Dave Jone's trinity tool. When a user process which is 32-bit performs a load or a store, the cpu chops off the top 32-bits of the effective address before translating it. This is because we run 32-bit tasks with the PSTATE_AM (address masking) bit set. We can't run the kernel with that bit set, so when the kernel accesses userspace no address masking occurs. Since a 32-bit process will have no mappings in that region we will properly fault, so we don't try to handle this using access_ok(), which can safely just be a NOP on sparc64. Real faults from 32-bit processes should never generate such addresses so a bug check was added long ago, and it barks in the logs if this happens. But it also barks when a kernel user access causes this condition, and that _can_ happen. For example, if a pointer passed into a system call is "0xfffffffc" and the kernel access 4 bytes offset from that pointer. Just handle such faults normally via the exception entries. Signed-off-by:
-
David S. Miller authored
[ Upstream commit fe866433 ] pte_ERROR() is not used anywhere, delete it. For pgd_ERROR() and pmd_ERROR(), output something similar to x86, giving the address of the pgd/pmd as well as it's value. Also provide the caller, since these macros are invoked from pgd_clear_bad() and pmd_clear_bad() which provides little context as to what high level operation was occuring when the BAD state was detected. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 26cf4325 ] Instead of returning false we should at least check the most basic things, otherwise page table corruptions will be very difficult to debug. PMD and PTE tables are of size PAGE_SIZE, so none of the sub-PAGE_SIZE bits should be set. We also complement this with a check that the physical address the pud/pmd points to is valid memory. PowerPC was used as a guide while implementating this. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 0eef331a ] Signed-off-by:
-
David S. Miller authored
[ Upstream commit ee73887e ] In commit b2d43834 ("sparc64: Make PAGE_OFFSET variable."), the MAX_PHYS_ADDRESS_BITS value was increased (to 47). This constant reference to '41UL' was missed. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 70ffc6eb ] Make get_user_insn() able to cope with huge PMDs. Next, make do_fault_siginfo() more robust when get_user_insn() can't actually fetch the instruction. In particular, use the MMU announced fault address when that happens, instead of calling compute_effective_address() and computing garbage. Signed-off-by:
-
David S. Miller authored
[ Upstream commit d037d163 ] If we have a 32-bit task we must chop off the top 32-bits of the 64-bit value just as the cpu would. Signed-off-by:
-
David S. Miller authored
[ Upstream commit eaf85da8 ] Signed-off-by:
-
David S. Miller authored
[ Upstream commit c2e4e676 ] When _PAGE_SPECIAL and _PAGE_PMD_HUGE were added to the mask, the comment was not updated. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 04df419d ] The large PMD path needs to check _PAGE_VALID not _PAGE_PRESENT, to decide if it needs to bail and return 0. pmd_large() should therefore just check _PAGE_PMD_HUGE. Calls to gup_huge_pmd() are guarded with a check of pmd_large(), so we just need to add a valid bit check. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 51e5ef1b ] On sparc64 "present" and "valid" are seperate PTE bits, this allows us to naturally distinguish between the user explicitly asking for PROT_NONE with mprotect() and other situations. However we weren't handling this properly in the huge PMD paths. First of all, the page table walker in the TSB miss path only checks for _PAGE_PMD_HUGE. So the generic pmdp_invalidate() would clear _PAGE_PRESENT but the TLB miss paths would still load it into the TLB as a valid huge PMD. Fix this by clearing the valid bit in pmdp_invalidate(), and also checking the valid bit in USER_PGTABLE_CHECK_PMD_HUGE using "brgez" since _PAGE_VALID is bit 63 in both the sun4u and sun4v pte layouts. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5b1e94fa ] This code was mistakenly using the exec bit from the PMD in all cases, even when the PMD isn't a huge PMD. If it's not a huge PMD, test the exec bit in the individual ptes down in tlb_batch_pmd_scan(). Signed-off-by:
-
Kirill Tkhai authored
[ Upstream commit 49b6c01f ] One more place where we must not be able to be preempted or to be interrupted in RT. Always actually disable interrupts during synchronization cycle. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
-
David S. Miller authored
[ Upstream commit aa3449ee ] Only the second argument, 'op', is signed. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 757efd32 ] Dave reported following splat, caused by improper use of IP_INC_STATS_BH() in process context. BUG: using __this_cpu_add() in preemptible [00000000] code: trinity-c117/14551 caller is __this_cpu_preempt_check+0x13/0x20 CPU: 3 PID: 14551 Comm: trinity-c117 Not tainted 3.16.0+ #33 ffffffff9ec898f0 0000000047ea7e23 ffff88022d32f7f0 ffffffff9e7ee207 0000000000000003 ffff88022d32f818 ffffffff9e397eaa ffff88023ee70b40 ffff88022d32f970 ffff8801c026d580 ffff88022d32f828 ffffffff9e397ee3 Call Trace: [<ffffffff9e7ee207>] dump_stack+0x4e/0x7a [<ffffffff9e397eaa>] check_preemption_disabled+0xfa/0x100 [<ffffffff9e397ee3>] __this_cpu_preempt_check+0x13/0x20 [<ffffffffc0839872>] sctp_packet_transmit+0x692/0x710 [sctp] [<ffffffffc082a7f2>] sctp_outq_flush+0x2a2/0xc30 [sctp] [<ffffffff9e0d985c>] ? mark_held_locks+0x7c/0xb0 [<ffffffff9e7f8c6d>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffffc082b99a>] sctp_outq_uncork+0x1a/0x20 [sctp] [<ffffffffc081e112>] sctp_cmd_interpreter.isra.23+0x1142/0x13f0 [sctp] [<ffffffffc081c86b>] sctp_do_sm+0xdb/0x330 [sctp] [<ffffffff9e0b8f1b>] ? preempt_count_sub+0xab/0x100 [<ffffffffc083b350>] ? sctp_cname+0x70/0x70 [sctp] [<ffffffffc08389ca>] sctp_primitive_ASSOCIATE+0x3a/0x50 [sctp] [<ffffffffc083358f>] sctp_sendmsg+0x88f/0xe30 [sctp] [<ffffffff9e0d673a>] ? lock_release_holdtime.part.28+0x9a/0x160 [<ffffffff9e0d62ce>] ? put_lock_stats.isra.27+0xe/0x30 [<ffffffff9e73b624>] inet_sendmsg+0x104/0x220 [<ffffffff9e73b525>] ? inet_sendmsg+0x5/0x220 [<ffffffff9e68ac4e>] sock_sendmsg+0x9e/0xe0 [<ffffffff9e1c0c09>] ? might_fault+0xb9/0xc0 [<ffffffff9e1c0bae>] ? might_fault+0x5e/0xc0 [<ffffffff9e68b234>] SYSC_sendto+0x124/0x1c0 [<ffffffff9e0136b0>] ? syscall_trace_enter+0x250/0x330 [<ffffffff9e68c3ce>] SyS_sendto+0xe/0x10 [<ffffffff9e7f9be4>] tracesys+0xdd/0xe2 This is a followup of commits f1d8cba6 ("inet: fix possible seqlock deadlocks") and 7f88c6b2 ("ipv6: fix possible seqlock deadlock in ip6_finish_output2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Dave Jones <davej@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit d9124268 ] batadv_frag_insert_packet was unable to handle out-of-order packets because it dropped them directly. This is caused by the way the fragmentation lists is checked for the correct place to insert a fragmentation entry. The fragmentation code keeps the fragments in lists. The fragmentation entries are kept in descending order of sequence number. The list is traversed and each entry is compared with the new fragment. If the current entry has a smaller sequence number than the new fragment then the new one has to be inserted before the current entry. This ensures that the list is still in descending order. An out-of-order packet with a smaller sequence number than all entries in the list still has to be added to the end of the list. The used hlist has no information about the last entry in the list inside hlist_head and thus the last entry has to be calculated differently. Currently the code assumes that the iterator variable of hlist_for_each_entry can be used for this purpose after the hlist_for_each_entry finished. This is obviously wrong because the iterator variable is always NULL when the list was completely traversed. Instead the information about the last entry has to be stored in a different variable. This problem was introduced in 610bfc6b ("batman-adv: Receive fragmented packets and merge"). Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 06ebb06d ] Check for cases when the caller requests 0 bytes instead of running off and dereferencing potentially invalid iovecs. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit fcdfe3a7 ] When performing segmentation, the mac_len value is copied right out of the original skb. However, this value is not always set correctly (like when the packet is VLAN-tagged) and we'll end up copying a bad value. One way to demonstrate this is to configure a VM which tags packets internally and turn off VLAN acceleration on the forwarding bridge port. The packets show up corrupt like this: 16:18:24.985548 52:54:00:ab:be:25 > 52:54:00:26:ce:a3, ethertype 802.1Q (0x8100), length 1518: vlan 100, p 0, ethertype 0x05e0, 0x0000: 8cdb 1c7c 8cdb 0064 4006 b59d 0a00 6402 ...|...d@.....d. 0x0010: 0a00 6401 9e0d b441 0a5e 64ec 0330 14fa ..d....A.^d..0.. 0x0020: 29e3 01c9 f871 0000 0101 080a 000a e833)....q.........3 0x0030: 000f 8c75 6e65 7470 6572 6600 6e65 7470 ...unetperf.netp 0x0040: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp 0x0050: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp 0x0060: 6572 6600 6e65 7470 6572 6600 6e65 7470 erf.netperf.netp ... This also leads to awful throughput as GSO packets are dropped and cause retransmissions. The solution is to set the mac_len using the values already available in then new skb. We've already adjusted all of the header offset, so we might as well correctly figure out the mac_len using skb_reset_mac_len(). After this change, packets are segmented correctly and performance is restored. CC: Eric Dumazet <edumazet@google.com> Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 081e83a7 ] Macvlan devices do not initialize vlan_features. As a result, any vlan devices configured on top of macvlans perform very poorly. Initialize vlan_features based on the vlan features of the lower-level device. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 1be9a950 ] Jason reported an oops caused by SCTP on his ARM machine with SCTP authentication enabled: Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 104 Comm: sctp-test Not tainted 3.13.0-68744-g3632f30c9b20-dirty #1 task: c6eefa40 ti: c6f52000 task.ti: c6f52000 PC is at sctp_auth_calculate_hmac+0xc4/0x10c LR is at sg_init_table+0x20/0x38 pc : [<c024bb80>] lr : [<c00f32dc>] psr: 40000013 sp : c6f538e8 ip : 00000000 fp : c6f53924 r10: c6f50d80 r9 : 00000000 r8 : 00010000 r7 : 00000000 r6 : c7be4000 r5 : 00000000 r4 : c6f56254 r3 : c00c8170 r2 : 00000001 r1 : 00000008 r0 : c6f1e660 Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005397f Table: 06f28000 DAC: 00000015 Process sctp-test (pid: 104, stack limit = 0xc6f521c0) Stack: (0xc6f538e8 to 0xc6f54000) [...] Backtrace: [<c024babc>] (sctp_auth_calculate_hmac+0x0/0x10c) from [<c0249af8>] (sctp_packet_transmit+0x33c/0x5c8) [<c02497bc>] (sctp_packet_transmit+0x0/0x5c8) from [<c023e96c>] (sctp_outq_flush+0x7fc/0x844) [<c023e170>] (sctp_outq_flush+0x0/0x844) from [<c023ef78>] (sctp_outq_uncork+0x24/0x28) [<c023ef54>] (sctp_outq_uncork+0x0/0x28) from [<c0234364>] (sctp_side_effects+0x1134/0x1220) [<c0233230>] (sctp_side_effects+0x0/0x1220) from [<c02330b0>] (sctp_do_sm+0xac/0xd4) [<c0233004>] (sctp_do_sm+0x0/0xd4) from [<c023675c>] (sctp_assoc_bh_rcv+0x118/0x160) [<c0236644>] (sctp_assoc_bh_rcv+0x0/0x160) from [<c023d5bc>] (sctp_inq_push+0x6c/0x74) [<c023d550>] (sctp_inq_push+0x0/0x74) from [<c024a6b0>] (sctp_rcv+0x7d8/0x888) While we already had various kind of bugs in that area ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable") and b14878cc ("net: sctp: cache auth_enable per endpoint"), this one is a bit of a different kind. Giving a bit more background on why SCTP authentication is needed can be found in RFC4895: SCTP uses 32-bit verification tags to protect itself against blind attackers. These values are not changed during the lifetime of an SCTP association. Looking at new SCTP extensions, there is the need to have a method of proving that an SCTP chunk(s) was really sent by the original peer that started the association and not by a malicious attacker. To cause this bug, we're triggering an INIT collision between peers; normal SCTP handshake where both sides intent to authenticate packets contains RANDOM; CHUNKS; HMAC-ALGO parameters that are being negotiated among peers: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- RFC4895 says that each endpoint therefore knows its own random number and the peer's random number *after* the association has been established. The local and peer's random number along with the shared key are then part of the secret used for calculating the HMAC in the AUTH chunk. Now, in our scenario, we have 2 threads with 1 non-blocking SEQ_PACKET socket each, setting up common shared SCTP_AUTH_KEY and SCTP_AUTH_ACTIVE_KEY properly, and each of them calling sctp_bindx(3), listen(2) and connect(2) against each other, thus the handshake looks similar to this, e.g.: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- <--------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------- -------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------> ... Since such collisions can also happen with verification tags, the RFC4895 for AUTH rather vaguely says under section 6.1: In case of INIT collision, the rules governing the handling of this Random Number follow the same pattern as those for the Verification Tag, as explained in Section 5.2.4 of RFC 2960 [5]. Therefore, each endpoint knows its own Random Number and the peer's Random Number after the association has been established. In RFC2960, section 5.2.4, we're eventually hitting Action B: B) In this case, both sides may be attempting to start an association at about the same time but the peer endpoint started its INIT after responding to the local endpoint's INIT. Thus it may have picked a new Verification Tag not being aware of the previous Tag it had sent this endpoint. The endpoint should stay in or enter the ESTABLISHED state but it MUST update its peer's Verification Tag from the State Cookie, stop any init or cookie timers that may running and send a COOKIE ACK. In other words, the handling of the Random parameter is the same as behavior for the Verification Tag as described in Action B of section 5.2.4. Looking at the code, we exactly hit the sctp_sf_do_dupcook_b() case which triggers an SCTP_CMD_UPDATE_ASSOC command to the side effect interpreter, and in fact it properly copies over peer_{random, hmacs, chunks} parameters from the newly created association to update the existing one. Also, the old asoc_shared_key is being released and based on the new params, sctp_auth_asoc_init_active_key() updated. However, the issue observed in this case is that the previous asoc->peer.auth_capable was 0, and has *not* been updated, so that instead of creating a new secret, we're doing an early return from the function sctp_auth_asoc_init_active_key() leaving asoc->asoc_shared_key as NULL. However, we now have to authenticate chunks from the updated chunk list (e.g. COOKIE-ACK). That in fact causes the server side when responding with ... <------------------ AUTH; COOKIE-ACK ----------------- ... to trigger a NULL pointer dereference, since in sctp_packet_transmit(), it discovers that an AUTH chunk is being queued for xmit, and thus it calls sctp_auth_calculate_hmac(). Since the asoc->active_key_id is still inherited from the endpoint, and the same as encoded into the chunk, it uses asoc->asoc_shared_key, which is still NULL, as an asoc_key and dereferences it in ... crypto_hash_setkey(desc.tfm, &asoc_key->data[0], asoc_key->len) ... causing an oops. All this happens because sctp_make_cookie_ack() called with the *new* association has the peer.auth_capable=1 and therefore marks the chunk with auth=1 after checking sctp_auth_send_cid(), but it is *actually* sent later on over the then *updated* association's transport that didn't initialize its shared key due to peer.auth_capable=0. Since control chunks in that case are not sent by the temporary association which are scheduled for deletion, they are issued for xmit via SCTP_CMD_REPLY in the interpreter with the context of the *updated* association. peer.auth_capable was 0 in the updated association (which went from COOKIE_WAIT into ESTABLISHED state), since all previous processing that performed sctp_process_init() was being done on temporary associations, that we eventually throw away each time. The correct fix is to update to the new peer.auth_capable value as well in the collision case via sctp_assoc_update(), so that in case the collision migrated from 0 -> 1, sctp_auth_asoc_init_active_key() can properly recalculate the secret. This therefore fixes the observed server panic. Fixes: 730fc3d0 ("[SCTP]: Implete SCTP-AUTH parameter processing") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Tested-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit c36c9d50 ] The recent commit "e29aa339 bna: Enable Multi Buffer RX" is causing a performance regression. It does not properly update 'cmpl' pointer at the end of the loop in NAPI handler bnad_cq_process(). The result is only one packet / per NAPI-schedule is processed. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 1f74e613 ] In vegas we do a multiplication of the cwnd and the rtt. This may overflow and thus their result is stored in a u64. However, we first need to cast the cwnd so that actually 64-bit arithmetic is done. Then, we need to do do_div to allow this to be used on 32-bit arches. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Doug Leith <doug.leith@nuim.ie> Fixes: 8d3a564d (tcp: tcp_vegas cong avoid fix) Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 45a07695 ] In veno we do a multiplication of the cwnd and the rtt. This may overflow and thus their result is stored in a u64. However, we first need to cast the cwnd so that actually 64-bit arithmetic is done. A first attempt at fixing 76f10177 ([TCP]: TCP Veno congestion control) was made by 15913114 (tcp: Overflow bug in Vegas), but it failed to add the required cast in tcp_veno_cong_avoid(). Fixes: 76f10177 ([TCP]: TCP Veno congestion control) Signed-off-by:
-
