- 24 Nov, 2022 40 commits
-
-
Joel Stanley authored
This is the register layout of the litesd peripheral for the fusesoc based Microwatt SoC. It requires a description of the system clock, which is hardcoded to 100MHz. Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930065012.2860577-1-joel@jms.id.au
-
Christophe Leroy authored
At the time being, with 16k pages __set_pte_at() writes table entries in reverse order: 294: 91 49 00 0c stw r10,12(r9) 298: 91 49 00 08 stw r10,8(r9) 29c: 91 49 00 04 stw r10,4(r9) 2a0: 91 49 00 00 stw r10,0(r9) Allthough there should be no impact at all as it stays in a single cacheline, reverse the writing in a more natural order. 288: 91 49 00 0c stw r10,0(r9) 28c: 91 49 00 08 stw r10,4(r9) 290: 91 49 00 04 stw r10,8(r9) 294: 91 49 00 00 stw r10,12(r9) Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
While looking at code generated for code patching, I saw that pte_clear generated: 2d8: 38 a0 00 00 li r5,0 2dc: 38 e0 10 00 li r7,4096 2e0: 39 00 20 00 li r8,8192 2e4: 39 40 30 00 li r10,12288 2e8: 90 a9 00 00 stw r5,0(r9) 2ec: 90 e9 00 04 stw r7,4(r9) 2f0: 91 09 00 08 stw r8,8(r9) 2f4: 91 49 00 0c stw r10,12(r9) With 16k pages, only the first entry is used by the kernel, so no need to adapt the address of other entries. Only duplicate the first entry for hardware. Now it is: 2cc: 39 40 00 00 li r10,0 2d0: 91 49 00 00 stw r10,0(r9) 2d4: 91 49 00 04 stw r10,4(r9) 2d8: 91 49 00 08 stw r10,8(r9) 2dc: 91 49 00 0c stw r10,12(r9) Signed-off-by:
-
Dmitry Torokhov authored
This patch converts the driver to newer gpiod API, and away from OF-specific legacy gpio API that we want to stop using. While at it, let's address a few more issues: - switch to using dev_info()/pr_info() and friends - cancel work when unbinding the driver Note that the original code handled halt GPIO polarity incorrectly: in halt callback, when line polarity is "low" it would set trigger to "1" and drive halt line high, which is counter to the annotation. gpiod API will drive such line low. However I do not see any DTSes in mainline that have a DT node with "sgy,gpio-halt" compatible. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
This switches PIKA Warp away from legacy gpio API and to newer gpiod API, so that we can eventually deprecate the former. Because LEDs are normally driven by leds-gpio driver, but the platform code also wants to access the LEDs during thermal shutdown, and gpiod API does not allow locating GPIO without requesting it, the platform code is now responsible for locating GPIOs through device tree and requesting them. It then constructs platform data for leds-gpio platform device and registers it. This allows platform code to retain access to LED GPIO descriptors and use them when needed. Signed-off-by:
-
Gustavo A. R. Silva authored
When building with automatic stack variable initialization, GCC 12 complains about variables defined outside of switch case statements. Move the variable into the case that uses it, which silences the warning: arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’: arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable] 1529 | int mode; | ^~~~ Fixes: 09b6c112 ("powerpc/xmon: Fix compile error with PPC_8xx=y") Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kajol Jain authored
Commit 57dc0eed ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C") removed the PMU save/restore functions from assembly code and implemented these functions in C, for power9 and later platforms. After the code refactoring, Performance Monitoring Unit (PMU) registers became part of "p9_host_os_sprs" structure and now this structure is used to save/restore pmu host registers, for power9 and later platfroms. But we still have old unused registers references. Patch removes unused host_mmcr references for Monitor Mode Control Register 3 (MMCR3)/ Sampled Instruction Event Register 2 (SIER2)/ SIER3 registers from "struct kvmppc_host_state". Fixes: 57dc0eed ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C") Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Disha Goel authored
The kvm code was refactored to convert some of kvm assembly routines to C. This includes commits which moved code path for the kvm guest entry/exit for p7/8 from aseembly to C. As part of the code changes, usage of some of the macros were removed. But definitions still exist in the assembly files. Commits are listed below: Commit 2e1ae9cd ("KVM: PPC: Book3S HV: Implement radix prefetch workaround by disabling MMU") Commit 9769a7fd ("KVM: PPC: Book3S HV: Remove radix guest support from P7/8 path") Commit fae5c9f3 ("KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1 support from P7/8 path") Commit 57dc0eed ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C") Many of the asm-offset macro definitions were missed to remove. Patch fixes by removing the unused macros. Signed-off-by:
Disha Goel <disgoel@linux.vnet.ibm.com> Reviewed-by:
-
Xiu Jianfeng authored
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by:
-
Nicholas Piggin authored
ISA v2.06 (POWER7 and up) as well as e6500 support lbarx and lharx. Add a compile option that allows code to use it, and add support in cmpxchg and xchg 8 and 16 bit values without shifting and masking. Signed-off-by:
-
Shaomin Deng authored
Drop the repeated word "when" in comments. Signed-off-by:
Shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by:
-
Nicholas Miehlbradt authored
Add POWER9 and POWER10 to CPU families and list Radix MMU. Signed-off-by:
Nicholas Miehlbradt <nicholas@linux.ibm.com> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Naveen N. Rao authored
Extend commit b39181f7 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function") to ppc32 and ppc64 -mprofile-kernel by defining FTRACE_MCOUNT_MAX_OFFSET. For ppc64 -mprofile-kernel ABI, we can have two instructions at function entry for TOC setup followed by 'mflr r0' and 'bl _mcount'. So, the mcount location is at most the 4th instruction in a function. For ppc32, mcount location is always the 3rd instruction in a function, preceded by 'mflr r0' and 'stw r0,4(r1)'. With this patch, and with ppc64le_guest_defconfig and some ftrace/bpf config items enabled: # grep __ftrace_invalid_address available_filter_functions | wc -l 79 Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Deming Wang authored
Operators should be separated by spaces in tce_buildmulti_pSeriesLP() Signed-off-by:
Deming Wang <wangdeming@inspur.com> Signed-off-by:
-
Yang Yingliang authored
get_function_0() calls pci_get_domain_bus_and_slot(), as comment says, it returns a pci device with refcount increment, so after using it, pci_dev_put() needs be called. Get the device reference when get_function_0() is not called, so pci_dev_put() can be called in the error path and callers unconditionally. And add comment above get_dvsec_vendor0() to tell callers to call pci_dev_put(). Fixes: 87db7579 ("ocxl: control via sysfs whether the FPGA is reloaded on a link reset") Suggested-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Acked-by:
-
Yang Yingliang authored
If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release(). Fixes: 75ca758a ("ocxl: Create a clear delineation between ocxl backend & frontend") Signed-off-by:
-
Yang Yingliang authored
If device_register() fails in cxl_pci_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails. Fixes: f204e0b8 ("cxl: Driver code for powernv PCIe based cards for userspace access") Signed-off-by:
-
Yang Yingliang authored
If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails. Fixes: 14baf4d9 ("cxl: Add guest-specific code") Signed-off-by:
-
Miaoqian Lin authored
of_get_next_parent() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function only calls of_node_put() in normal path, missing it in the error path. Add missing of_node_put() to avoid refcount leak. Fixes: f24be42a ("cxl: Add psl9 specific code") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Acked-by:
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Acked-by:
-
Deming Wang authored
The parameter xc to xive_cleanup_single_escalation() is unused, so we can remove it. Signed-off-by:
-
Randy Dunlap authored
Fix multiple kernel-doc warnings in mpc52xx_lpbfifo.c: arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c:377: warning: expecting prototype for mpc52xx_lpbfifo_bcom_poll(). Prototype was for mpc52xx_lpbfifo_poll() instead mpc52xx_lpbfifo.c:221: warning: No description found for return value of 'mpc52xx_lpbfifo_irq' mpc52xx_lpbfifo.c:327: warning: No description found for return value of 'mpc52xx_lpbfifo_bcom_irq' mpc52xx_lpbfifo.c:398: warning: No description found for return value of 'mpc52xx_lpbfifo_submit' mpc52xx_lpbfifo.c:64: warning: Function parameter or member 'req' not described in 'mpc52xx_lpbfifo_kick' mpc52xx_lpbfifo.c:220: warning: contents before sections mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_irq' mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_irq' mpc52xx_lpbfifo.c:328: warning: contents before sections mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_bcom_irq' mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_bcom_irq' Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Christophe Leroy authored
Last usage of find_current_mm_pte() was removed by commit 15759cb0 ("powerpc/perf/callchain: Use __get_user_pages_fast in read_user_stack_slow") Remove it. Signed-off-by:
-
Christophe JAILLET authored
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq() that is not balanced by a corresponding free_irq(). Add the missing call, as already done in the remove function. Fixes: 3c9059d7 ("powerpc/5200: add LocalPlus bus FIFO device driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Xie Shaowen authored
The function ioremap() in macio_init() can fail, so its return value should be checked. Fixes: 36874579 ("[PATCH] powerpc: macio-adb build fix") Reported-by:
Hacash Robot <hacashRobot@santino.com> Signed-off-by:
Xie Shaowen <studentxswpy@163.com> Signed-off-by:
-
Yang Yingliang authored
Afer commit 1fa5ae85 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically. It needs to be freed when of_device_register() fails. Call put_device() to give up the reference that's taken in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hits 0. macio device is freed in macio_release_dev(), so the kfree() can be removed. Fixes: 1fa5ae85 ("driver core: get rid of struct device's bus_id string array") Signed-off-by:
-
Yang Yingliang authored
Use for_each_child_of_node() macro instead of open coding it. No functional change. Signed-off-by:
-
Li zeming authored
I think the header file could avoid redefinition errors at compile time by adding macro definitions. Signed-off-by:
Li zeming <zeming@nfschina.com> [mpe: Add endif comment] Signed-off-by:
-
Li zeming authored
Add header file macro definition. Signed-off-by:
-
Stephen Kitt authored
backlight_properties.fb_blank is deprecated. The states it represents are handled by other properties; but instead of accessing those properties directly, drivers should use the helpers provided by backlight.h. Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by:
Stephen Kitt <steve@sk2.org> Signed-off-by:
-
Finn Thain authored
drivers/macintosh/via-pmu.c:897:12: warning: 'pmu_battery_proc_show' defined but not used [-Wunused-function] static int pmu_battery_proc_show(struct seq_file *m, void *v) ^~~~~~~~~~~~~~~~~~~~~ drivers/macintosh/via-pmu.c:871:12: warning: 'pmu_irqstats_proc_show' defined but not used [-Wunused-function] static int pmu_irqstats_proc_show(struct seq_file *m, void *v) ^~~~~~~~~~~~~~~~~~~~~~ drivers/macintosh/via-pmu.c:860:12: warning: 'pmu_info_proc_show' defined but not used [-Wunused-function] static int pmu_info_proc_show(struct seq_file *m, void *v) ^~~~~~~~~~~~~~~~~~ Add some #ifdefs to avoid unused code warnings when CONFIG_PROC_FS is disabled. Reported-by:Finn Thain <fthain@linux-m68k.org> Tested-by:
-
Haowen Bai authored
Avoid pointer type value compared with 0 to make code clear. Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Signed-off-by:
-
Haowen Bai authored
Avoid pointer type value compared with 0 to make code clear. Signed-off-by:
-
Haowen Bai authored
Avoid pointer type value compared with 0 to make code clear. Signed-off-by:
-
Haowen Bai authored
Avoid pointer type value compared with 0 to make code clear. Signed-off-by:
-
Haowen Bai authored
Avoid pointer type value compared with 0 to make code clear. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
