- 27 Mar, 2023 5 commits
-
-
Yang Li authored
According to commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/20230327060516.93509-2-yang.lee@linux.alibaba.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Yang Li authored
According to commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yang Li authored
According to commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yang Li authored
According to commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yang Li authored
According to commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230327055346.76625-1-yang.lee@linux.alibaba.comSigned-off-by:
-
- 22 Mar, 2023 3 commits
-
-
Kunihiko Hayashi authored
The .supports_op() callback function returns true by default after performing driver-specific checks. Therefore the driver cannot apply the buswidth in devicetree. Call spi_mem_default_supports_op() helper to handle the buswidth in devicetree. Fixes: 1b74dd64 ("spi: Add Socionext F_OSPI SPI flash controller driver") Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20230322023101.24490-1-hayashi.kunihiko@socionext.comSigned-off-by:
-
Haibo Chen authored
When clock rate > 100MHz, use the DLL calibration mode, and finally add the suggested half of the current clock cycle to sample the data. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230322090451.3179431-2-haibo.chen@nxp.comSigned-off-by:
-
Haibo Chen authored
Current DLL config is just to use the default setting, this means enable the DLL override mode, and use 1 fixed delay cell in the DLL delay chain, not means "reset" the DLL, so correct this to avoid confuse. Signed-off-by:
-
- 20 Mar, 2023 7 commits
-
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: An early error return from a remove callback is usally wrong. In the case of the spi-sprd driver it's not that critical because the skipped steps are mainly undoing the things that a successful runtime-resume would have done. Still it's cleaner to not exit early and not return an (mostly ignored) error value. The second patch converts to .remove_new (which is the motivation for this series).
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: This small series converts the spi-imx driver to .remove_new(). The motivation for this tree-wide effort are drivers that don't properly cleanup and return an error code. This is broken as this results in resource leaks. The spi-imx driver is such a driver. The idea is that if the remove callback returns void it's obvious that an early error return is wrong.
-
Geert Uytterhoeven authored
Make "clocks" and "power-domains" required everywhere. Make "resets" required on R-Car Gen2 and newer (i.e. all but SH-Mobile). Update the example to match reality: - Use interrupt binding definitions instead of hardcoded numbers, - Convert to new-style CPG/MSSR bindings, - Add missing "power-domains" and "resets" properties. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/052af97ecbaa9ba6e0d406883dd3389fa397579a.1678891999.git.geert+renesas@glider.beSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230306065733.2170662-3-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
Returning early in a platform driver's remove callback is wrong. In this case the dma resources are not released in the error path. this is never retried later and so this is a permanent leak. To fix this, only skip hardware disabling if waking the device fails. Fixes: d593574a ("spi: imx: do not access registers while clocks disabled") Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
If pm_runtime_resume_and_get() failed before this change, two error messages were printed. One directly in sprd_spi_remove() and another by the device core as the return value is non-zero. The better handling of a failure to resume the device is to do the software related cleanup anyhow and only skip hardware accesses. This leaves the device in an unknown state, but there is nothing that can be done about that. Even in the error case, return zero to suppress the device core's error message. Signed-off-by:
-
- 17 Mar, 2023 4 commits
-
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: This series converts the atmel-quadspi driver to use the .remove_new() callback that doesn't return an int but void. The motivation is to not give driver authors a reason to (wrongly) believe that returning an error code was sensible error handling. In fact the spi core only emits a warning message in this case and otherwise continues as if the return value was zero. This usually yields resource leaks that sometimes can lead to exceptions later on. The atmel-quadspi driver is one of these drivers that got error handling wrong, this is fixed here and in the last patch the driver is converted to .remove_new() with the eventual goal to change .remove() to return void once all drivers are converted this way.
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20230317084232.142257-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
An early error exit in atmel_qspi_remove() doesn't prevent the device unbind. So this results in an spi controller with an unbound parent and unmapped register space (because devm_ioremap_resource() is undone). So using the remaining spi controller probably results in an oops. Instead unregister the controller unconditionally and only skip hardware access and clk disable. Also add a warning about resume failing and return zero unconditionally. The latter has the only effect to suppress a less helpful error message by the spi core. Fixes: 4a2f83b7 ("spi: atmel-quadspi: add runtime pm support") Signed-off-by:
-
Uwe Kleine-König authored
The pm resume call is supposed to enable two clocks. If the second enable fails the callback reports failure but doesn't undo the first enable. So call clk_disable() for the first clock when clk_enable() for the second one fails. Fixes: 4a2f83b7 ("spi: atmel-quadspi: add runtime pm support") Signed-off-by:
-
- 16 Mar, 2023 2 commits
-
-
Leonard Göhrs authored
The TSIZE register in CR2, to which the number of words to transfer is written, is only 16 Bit. This limits transfers to 65535 SPI _words_ at a time. The existing code uses spi_split_transfers_maxsize to limit transfers to 65535 _bytes_ at a time. This breaks large transfers with bits_per_word > 8, as they are split inside of a word boundary by the odd size limit. Split transfers based on the number of words instead. This has the added benefit of not artificially limiting the maximum length of bpw > 8 transfers to half or a quarter of the actual limit. The combination of very large transfers and bits_per_word = 16 is triggered e.g. by MIPI DBI displays when updating large parts of the screen. Signed-off-by:
Leonard Göhrs <l.goehrs@pengutronix.de> Acked-by:
Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20230310092053.1006459-2-l.goehrs@pengutronix.deSigned-off-by:
-
Leonard Göhrs authored
Add spi_split_transfers_maxwords() function that splits spi_transfers transparently into multiple transfers that are below a given number of SPI words. This function reuses most of its code from spi_split_transfers_maxsize() and for transfers with eight or less bits per word actually behaves the same. Signed-off-by:
-
- 14 Mar, 2023 1 commit
-
-
Lukas Bulwahn authored
With commit 721da5ce ("driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2"), ./scripts/checkkconfigsymbols.py indicated an unresolved reference to the config SYSFS_DEPRECATED in the SPI summary documentation. Simply, delete the sentence referring to the removed config there. Also update the documentation, as these sys/class entries should always be symlinks, as the commit message of the commit above suggests. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230314075609.5232-1-lukas.bulwahn@gmail.comSigned-off-by:
-
- 13 Mar, 2023 13 commits
-
-
Mark Brown authored
Merge series from Geert Uytterhoeven <geert+renesas@glider.be>: After noticing new cases of casting away constness, I went over all spi_get_*() functions and their callers, and made the following changes: 1. Make all pointer parameters const where possible, 2. Remove unneeded casts, some not even related to constness.
-
Alexander Stein authored
This driver also supports various i.MX8 platforms. Add ARCH_MXC for selecting this driver without Layerscape support. Fixes: c6b15b24 ("spi: nxp-flexspi: Fix ARCH_LAYERSCAPE dependency") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230313083621.154729-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Krzysztof Kozlowski authored
Driver can match via ID or OF ID table, thus several OF-related methods will be unused. Mark the OF structures as __maybe_unused so compiler can drop them: drivers/spi/spi-rspi.c:1203:29: error: ‘qspi_ops’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230310222857.315629-16-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-sc18is602.c:318:34: error: ‘sc18is602_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-sh-msiof.c:1076:34: error: ‘sh_msiof_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-bcm-qspi.c:1460:34: error: ‘bcm_qspi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230310222857.315629-13-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/spi/spi-pxa2xx.c:1757:34: error: ‘pxa2xx_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Geert Uytterhoeven authored
Now the chip select APIs take const pointers, there is no longer a need to cast away constness. Fixes: 9e264f3f ("spi: Replace all spi->chip_select and spi->cs_gpiod references with function call") Signed-off-by:
-
Geert Uytterhoeven authored
The "spi" parameters of spi_get_chipselect() and spi_get_csgpiod() can be const. Fixes: 303feb3c ("spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod") Signed-off-by:
-
Geert Uytterhoeven authored
The "spi" parameter of spi_get_drvdata() can be const. dev_get_drvdata() has been taking a const pointer since commit 7d1d8999 ("i2c: Constify i2c_get_clientdata's parameter"). Signed-off-by:
-
Geert Uytterhoeven authored
The "spi" parameter of spi_get_ctldata() can be const. Signed-off-by:
-
Geert Uytterhoeven authored
There is never a need to cast a pointer to the same pointer type. Signed-off-by:
-
Mark Brown authored
Linux 6.3-rc2
-
- 12 Mar, 2023 5 commits
-
-
Linus Torvalds authored
-
Hector Martin authored
This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by:
Hector Martin <marcan@marcan.st> Reported-by:
Ilya <me@0upti.me> Reported-and-tested-by:
Janne Grunau <j@jannau.net> Reviewed-by:
Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
-
Mario Limonciello authored
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by:
Bell <1138267643@qq.com> Co-developed-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Morten Linderud authored
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a0 ("tpm: Fix handling of missing event log") Tested-by:Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by:
Morten Linderud <morten@linderud.pw> Reviewed-by:
-
