- 08 Mar, 2018 20 commits
-
-
Adrian Hunter authored
Adjust overlap-checking to support sampling mode. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1520431349-30689-10-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
Intel PT code already has some preparation for AUX area sampling mode. However the implementation has changed from the first proposal and one of the side-effects is that it will not be impossible to support snapshot mode and sampling mode at the same time. Although there are no plans to support it, let validation (not yet implemented) control whether it is allowed rather than low-level functions. Signed-off-by:
-
Adrian Hunter authored
intel_pt_get_trace() fixes overlaps between the current buffer and the previous buffer ('old_buffer'). However the previous buffer might not have had usable data (no PSB) so the comparison must be made against the previous buffer that had usable data. Tidy that by keeping a pointer for that purpose in struct intel_pt_queue. Signed-off-by: -
Adrian Hunter authored
With the new way sampling support will be implemented, intel_pt_use_buffer_pid_tid() will not be needed. Get rid of it. Signed-off-by:
-
Adrian Hunter authored
Tidy auxtrace_record__init_intel() slightly by recognizing that evlist is never NULL. Signed-off-by:
-
Adrian Hunter authored
timestamp_insn_cnt is used to estimate the timestamp based on the number of instructions since the last known timestamp. If the estimate is not accurate enough decoding might not be correctly synchronized with side-band events causing more trace errors. However there are always timestamps following an overflow, so the estimate is not needed and can indeed result in more errors. Suppress the estimate by setting timestamp_insn_cnt to zero. Signed-off-by:
-
Adrian Hunter authored
When a TIP packet is expected but there is a different packet, it is an error. However the unexpected packet might be something important like a TSC packet, so after the error, it is necessary to continue from there, rather than the next packet. That is achieved by setting pkt_step to zero. Signed-off-by:
-
Adrian Hunter authored
sync_switch is a facility to synchronize decoding more closely with the point in the kernel when the context actually switched. The flag when sync_switch is enabled was global to the decoding, whereas it is really specific to the CPU. The trace data for different CPUs is put on different queues, so add sync_switch to the intel_pt_queue structure and use that in preference to the global setting in the intel_pt structure. That fixes problems decoding one CPU's trace because sync_switch was disabled on a different CPU's queue. Signed-off-by:
-
Adrian Hunter authored
Overlap detection was not not updating the buffer's 'consecutive' flag. Marking buffers consecutive has the advantage that decoding begins from the start of the buffer instead of the first PSB. Fix overlap detection to identify consecutive buffers correctly. Signed-off-by:
-
Kan Liang authored
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments to perf_mmap__read_init(). The data is stored in the struct perf_mmap. Discard the parameters. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Suggested-by:
Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1520350567-80082-8-git-send-email-kan.liang@linux.intel.comSigned-off-by:
-
Kan Liang authored
It isn't necessary to pass the 'overwrite', 'start' and 'end' argument to perf_mmap__read_event(). Discard them. Signed-off-by:
-
Kan Liang authored
It isn't necessary to pass the 'overwrite' argument to perf_mmap__consume(). Discard it. Signed-off-by:
-
Kan Liang authored
The 'overwrite' is set at allocation. It will not be changed. Using it to replace the parameter of perf_mmap__consume(). The parameters will be discarded later. No functional change. Signed-off-by:
-
Kan Liang authored
Using the 'start', 'end' and 'overwrite' which are stored in struct perf_mmap to replace the parameters of perf_mmap__read_event(). The parameters will be discarded later. No functional change. Signed-off-by:
-
Kan Liang authored
Using the 'start' and 'end' which are stored in struct perf_mmap to replace the temporary 'start' and 'end'. The temporary variables will be discarded later. It doesn't need to pass 'overwrite' to perf_mmap__push(). It's stored in struct perf_mmap. Signed-off-by:
-
Kan Liang authored
There is too much boilerplate in the perf_mmap__read*() interfaces. The 'start' and 'end' variables should be stored in struct perf_mmap at initialization. They will be used later. The old 'startp' and 'endp' pointers are used by perf_mmap__read_event() now. They cannot be removed. So the old 'startp/endp' and new 'md->start/md->end' will exist simultaneously now. The old one will be removed later. Signed-off-by:
-
Kan Liang authored
It has been determined that the map is for overwrite mode (evlist->overwrite_mmap) or non-overwrite mode (evlist->mmap) when calling perf_evlist__alloc_mmap(). Store the information in struct perf_mmap, which will be used later to simplify the perf_mmap__read*() interfaces. Signed-off-by:
-
Agustin Vega-Frias authored
Auto-merge for these events was disabled when auto-merging of non-alias events was disabled in commit 63ce8449 (perf stat: Only auto-merge events that are PMU aliases). Non-merging of legacy events is preserved: $ perf stat -ag -e cache-misses,cache-misses sleep 1 Performance counter stats for 'system wide': 86,323 cache-misses 86,323 cache-misses 1.002623307 seconds time elapsed But prefix or glob matching auto-merges the events created: $ perf stat -a -e l3cache/read-miss/ sleep 1 Performance counter stats for 'system wide': 328 l3cache/read-miss/ 1.002627008 seconds time elapsed $ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1 Performance counter stats for 'system wide': 172 l3cache/read-miss/ 1.002627008 seconds time elapsed As with events created with aliases, auto-merging can be suppressed with the --no-merge option: $ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1 Performance counter stats for 'system wide': 67 l3cache/read-miss/ 67 l3cache/read-miss/ 63 l3cache/read-miss/ 60 l3cache/read-miss/ 1.002622192 seconds time elapsed Signed-off-by:
Agustin Vega-Frias <agustinv@codeaurora.org> Acked-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Agustin Vega-Frias authored
To simplify creation of events accross multiple instances of the same type of PMU stat supports two methods for creating multiple events from a single event specification: 1. A prefix or glob can be used in the PMU name. 2. Aliases, which are listed immediately after the Kernel PMU events by perf list, are used. When the --no-merge option is passed and these events are displayed individually the PMU name is lost and it's not possible to see which count corresponds to which pmu: $ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null Performance counter stats for 'system wide': 67 l3cache/read-miss/ 67 l3cache/read-miss/ 63 l3cache/read-miss/ 60 l3cache/read-miss/ 0.001675706 seconds time elapsed $ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null Performance counter stats for 'system wide': 12 l3cache_read_miss 17 l3cache_read_miss 10 l3cache_read_miss 8 l3cache_read_miss 0.001661305 seconds time elapsed This change adds the original pmu name to the event. For dynamic pmu events the pmu name is restored in the event name: $ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null Performance counter stats for 'system wide': 63 l3cache_0_3/read-miss/ 74 l3cache_0_1/read-miss/ 64 l3cache_0_2/read-miss/ 74 l3cache_0_0/read-miss/ 0.001675706 seconds time elapsed For alias events the name is added after the event name: $ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null Performance counter stats for 'system wide': 10 l3cache_read_miss [l3cache_0_3] 12 l3cache_read_miss [l3cache_0_1] 10 l3cache_read_miss [l3cache_0_2] 17 l3cache_read_miss [l3cache_0_0] 0.001661305 seconds time elapsed Signed-off-by: -
Agustin Vega-Frias authored
Starting on v4.12 event parsing code for dynamic pmu events already supports prefix-based matching of multiple pmus when creating dynamic events. E.g., in a system with the following dynamic pmus: mypmu_0 mypmu_1 mypmu_2 mypmu_4 passing mypmu/<config>/ as an event spec will result in the creation of the event in all of the pmus. This change expands this matching through the use of fnmatch so glob-like expressions can be used to create events in multiple pmus. E.g., in the system described above if a user only wants to create the event in mypmu_0 and mypmu_1, mypmu_[01]/<config>/ can be passed. Signed-off-by:
-
- 07 Mar, 2018 20 commits
-
-
Takashi Iwai authored
I've tested to process the perf man pages with asciidoctor that is picker than asciidoc, and it revealed minor syntax errors in some documents. Namely, the title markers aren't aligned with the previous line, hence asciidoctor didn't recognize as titles. This patch corrects these markers to be processed properly. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307105441.28512-1-tiwai@suse.deSigned-off-by:
-
Adrian Hunter authored
In preparation for supporting AUX area sampling buffers, auxtrace_queues__add_buffer() needs to be more generic. To that end, make it return buffer_ptr instead of the caller. Signed-off-by:
-
Adrian Hunter authored
Rename some buffer-queuing functions in preparation for supporting AUX area sampling buffers. Signed-off-by:
-
Adrian Hunter authored
Add missing parameters from kernel-doc comments. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
One can set a cgroup as a default cgroup to be used by all events or set cgroups with the 'perf stat' and 'perf record' behaviour, i.e. '-G A' will be the cgroup for events defined so far in the command line. Here in my main machine, with a kvm instance running a rhel6 guinea pig I have: # ls -la /sys/fs/cgroup/perf_event/ | grep drw drwxr-xr-x. 14 root root 360 Mar 6 12:04 .. drwxr-xr-x. 3 root root 0 Mar 6 15:05 machine.slice # So I can go ahead and use that cgroup hierarchy, say lets see what syscalls are being emitted by threads in that 'machine.slice' hierarchy that are taking more than 100ms: # perf trace --duration 100 -G machine.slice 0.188 (249.850 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 250.274 (249.743 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 500.224 (249.755 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 750.097 (249.934 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 1000.244 (249.780 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 1250.197 (249.796 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 1500.124 (249.859 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 1750.076 (172.900 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 902.570 (1021.116 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1 1923.825 (305.133 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1 2000.172 (229.002 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 ^C # If we look inside that cgroup hierarchy we get: # ls -la /sys/fs/cgroup/perf_event/machine.slice/ | grep drw drwxr-xr-x. 3 root root 0 Mar 6 15:05 . drwxr-xr-x. 2 root root 0 Mar 6 16:16 machine-qemu\x2d2\x2drhel6.sandy.scope # There is just one, but lets say there were more and we would want to see 5 seconds worth of syscall summary for the threads in that cgroup: # perf trace --summary -G machine.slice/machine-qemu\\x2d2\\x2drhel6.sandy.scope/ -a sleep 5 Summary of events: qemu-system-x86 (23667), 143858 events, 24.2% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- --------- ------ ppoll 28492 4348.631 0.000 0.153 11.616 1.05% futex 19661 140.801 0.001 0.007 2.993 3.20% read 18440 68.084 0.001 0.004 1.653 4.33% ioctl 5387 24.768 0.002 0.005 0.134 1.62% CPU 0/KVM (23744), 449455 events, 75.8% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- --------- ------ ioctl 148364 3401.812 0.000 0.023 11.801 1.15% futex 36131 404.127 0.001 0.011 7.377 2.63% writev 29452 339.688 0.003 0.012 1.740 1.36% write 11315 45.992 0.001 0.004 0.105 1.10% # See the documentation about how to set more than one cgroup for different events in the same command line. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-t126jh4occqvu0xdqlcjygex@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
The usual thing is for a constructor to allocate space for its members, not to require that the caller pass a pre-allocated 'name' and then, at its destructor, to free something not allocated by it. Fix it by making cgroup__new() to receive a const char pointer, then allocate cgroup->name that then can continue to be freed at cgroup__delete(), balancing the alloc/free operations inside the cgroup struct methods. This eases calling evlist__findnew_cgroup() from the custom 'perf trace' cgroup parser, that will only call parse_cgroups() when the '-G cgroup' is passed on the command line after '-e event' entries, when it'll behave just like 'perf stat' and 'perf record', i.e. the previous parse_cgroup() users that mandate that -G only can come after a -e. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-4leugnuyqi10t98990o3xi1t@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
So that tools like 'perf trace' can allow the user to set a cgroup to be used for all the evsels still without a crgroup setup by parse_cgroups(), such as the one to use for the syscalls, vfs_getname and other events involved in strace like syscall tracing. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zf9jjsbj661r3lk6qb7g8j70@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Similar to machine__findnew_thread(), etc, i.e. try to find, get a refcount if found and return it, otherwise return a new cgroup object. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-im1omevlihhyneiic4nl3g24@git.kernel.orgSigned-off-by:
-
Adrian Hunter authored
In preparation for adding AUX area sampling support, combine some auxtrace initialization into a single function. Signed-off-by:
-
Changbin Du authored
This is to show the real name of thread that created via fork-exec. See below example for shortname *A0*. $ sudo ./perf sched map *A0 80393.050639 secs A0 => perf:22368 *. A0 80393.050748 secs . => swapper:0 . *. 80393.050887 secs *B0 . . 80393.052735 secs B0 => rcu_sched:8 *. . . 80393.052743 secs . *C0 . 80393.056264 secs C0 => kworker/2:1H:287 . *A0 . 80393.056270 secs . *D0 . 80393.056769 secs D0 => ksoftirqd/2:22 - . *A0 . 80393.056804 secs + . *A0 . 80393.056804 secs A0 => pi:22368 . *. . 80393.056854 secs *B0 . . 80393.060727 secs ... Signed-off-by:Changbin Du <changbin.du@intel.com> Acked-by:
-
Changbin Du authored
The thread::shortname only used by sched command, so move it to sched private structure. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To follow the namespacing convention in tools/perf. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jaalyl6bkvvji4r5u8wqw4n4@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To break down complexity in add_cgroup(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-5yqshcf5hm837n7c86u7lhjf@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The refcount operation counterpart to cgroup__put(), use it when reusing a cgroup. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-14ynvrl7y2cz8gyuy5q5v41g@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
It is not really closing the cgroup, but instead dropping a reference count and if it hits zero, then calling delete, which will, among other cleanup shores, close the cgroup fd. So it is really dropping a reference to that cgroup, and the method name for that is "put", so rename close_cgroup() to cgroup__put() to follow this naming convention. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-sccxpnd7bgwc1llgokt6fcey@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Just to make this code look more like other places in tools/perf. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-j3j72vvn2d5j7tenlghdy195@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
That name isn't used, is shorter, lets switch to it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-e51yphwgvepd1y4f5fjptmjq@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The 'opt' parameter in parse_cgroups() _is_ used. The original patch used '__used' that was even more confusing :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 023695d9 ("perf tool: Add cgroup support") Link: https://lkml.kernel.org/n/tip-4jo2puz0empkoou6bbq460tl@git.kernel.orgSigned-off-by:
-
Ingo Molnar authored
Conflicts: tools/perf/perf.h Signed-off-by:Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-4.16-20180306' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Be more robust when drawing arrows in the annotation TUI, avoiding a segfault when jump instructions have as a target addresses in functions other that the one currently being annotated. The full fix will come in the following days, when jumping to other functions will work as call instructions (Arnaldo Carvalho de Melo) - Prevent auxtrace_queues__process_index() from queuing AUX area data for decoding when the --no-itrace option has been used (Adrian Hunter) - Sync copy of kvm UAPI headers and x86's cpufeatures.h (Arnaldo Carvalho de Melo) - Fix 'perf stat' CSV output format for non-supported counters (Ilya Pronin) - Fix crash in 'perf record|perf report' pipe mode (Jiri Olsa) - Fix annoying 'perf top' overwrite fallback message on older kernels (Kan Liang) - Fix the usage on the 'perf kallsyms' man page (Sangwon Hong) Signed-off-by:
-
