Add missing OID to the registry. Some servers and clients (including
Windows) now request "NEGOEX - SPNEGEO Extended Negotiation Security")

See https://datatracker.ietf.org/doc/html/draft-zhu-negoex-02Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

There was a minor typo in the define for SMB2_GLOBAL_CAP_LARGE_MTU
      0X00000004 instead of 0x00000004
make it consistent
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

From 2.44 to 2.45
Signed-off-by: Steve French <stfrench@microsoft.com>

Allow adjusting the maximum number of cached directories per share
(defaults to 16) via mount parm "max_cached_dirs"
Signed-off-by: Steve French <stfrench@microsoft.com>

In debugging a recent performance problem with statfs, it would have
been helpful to be able to trace the smb3 query fs info request
more narrowly.  Add a trace point "smb3_qfs_done"

Which displays:

 stat-68950   [008] .....  1472.360598: smb3_qfs_done: xid=14 sid=0xaa9765e4 tid=0x95a76f54 unc_name=\\localhost\test rc=0
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

NLS_UCS2_UTILS is an option selected by filesystems that need it,
don't expose it to users.

Fixes: 089f7f59 ("fs/smb: Swing unicode common code from smb->NLS")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currently with directory leases we cache directory contents for a fixed period
of time (default 30 seconds) but for many workloads this is too short.  Allow
configuring the maximum amount of time directory entries are cached when a
directory lease is held on that directory. Add module load parm "max_dir_cache"

For example to set the timeout to 10 minutes you would do:

  echo 600 > /sys/module/cifs/parameters/dir_cache_timeout

or to disable caching directory contents:

  echo 0 > /sys/module/cifs/parameters/dir_cache_timeout
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

In addition to the EINVAL, there may be an ENOMEM.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 70431bfd ("cifs: Support fscache indexing rewrite")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull smb client updates from Steve French:

 - fixes for excessive stack usage

 - multichannel reconnect improvements

 - DFS fix and cleanup patches

 - move UCS-2 conversion code to fs/nls and update cifs and jfs to use
   them

 - cleanup patch for compounding, one to fix confusing function name

 - inode number collision fix

 - reparse point fixes (including avoiding an extra unneeded query on
   symlinks) and a minor cleanup

 - directory lease (caching) improvement

* tag '6.6-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
  fs/jfs: Use common ucs2 upper case table
  fs/smb/client: Use common code in client
  fs/smb: Swing unicode common code from smb->NLS
  fs/smb: Remove unicode 'lower' tables
  SMB3: rename macro CIFS_SERVER_IS_CHAN to avoid confusion
  [SMB3] send channel sequence number in SMB3 requests after reconnects
  cifs: update desired access while requesting for directory lease
  smb: client: reduce stack usage in smb2_query_reparse_point()
  smb: client: reduce stack usage in smb2_query_info_compound()
  smb: client: reduce stack usage in smb2_set_ea()
  smb: client: reduce stack usage in smb_send_rqst()
  smb: client: reduce stack usage in cifs_demultiplex_thread()
  smb: client: reduce stack usage in cifs_try_adding_channels()
  smb: cilent: set reparse mount points as automounts
  smb: client: query reparse points in older dialects
  smb: client: do not query reparse points twice on symlinks
  smb: client: parse reparse point flag in create response
  smb: client: get rid of dfs code dep in namespace.c
  smb: client: get rid of dfs naming in automount code
  smb: client: rename cifs_dfs_ref.c to namespace.c
  ...

Pull nvdimm updates from Dave Jiang:
 "This is mostly small cleanups, fixes, and with a change to prevent
  zero-sized namespace exposed to user for nvdimm.

  Summary:

   - kstrtobool() conversion for nvdimm

   - Add REQ_OP_WRITE for virtio_pmem

   - Header files update for of_pmem

   - Restrict zero-sized namespace from being exposed to user

   - Avoid unnecessary endian conversion

   - Fix mem leak in nvdimm pmu

   - Fix dereference after free in nvdimm pmu"

* tag 'libnvdimm-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm: Fix dereference after free in register_nvdimm_pmu()
  nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
  nvdimm/pfn_dev: Avoid unnecessary endian conversion
  nvdimm/pfn_dev: Prevent the creation of zero-sized namespaces
  nvdimm: Explicitly include correct DT includes
  virtio_pmem: add the missing REQ_OP_WRITE for flush bio
  nvdimm: Use kstrtobool() instead of strtobool()

Pull iommufd updates from Jason Gunthorpe:
 "On top of the vfio updates is built some new iommufd functionality:

   - IOMMU_HWPT_ALLOC allows userspace to directly create the low level
     IO Page table objects and affiliate them with IOAS objects that
     hold the translation mapping. This is the basic functionality for
     the normal IOMMU_DOMAIN_PAGING domains.

   - VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
     translation. This is wired up to through all the layers down to the
     driver so the driver has the ability to implement a hitless
     replacement. This is necessary to fully support guest behaviors
     when emulating HW (eg guest atomic change of translation)

   - IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
     that owns a VFIO device. This includes support for the Intel iommu,
     and patches have been posted for all the other server IOMMU.

  Along the way are a number of internal items:

   - New iommufd kernel APIs: iommufd_ctx_has_group(),
        iommufd_device_to_ictx(), iommufd_device_to_id(),
        iommufd_access_detach(), iommufd_ctx_from_fd(),
        iommufd_device_replace()

   - iommufd now internally tracks iommu_groups as it needs some
     per-group data

   - Reorganize how the internal hwpt allocation flows to have more
     robust locking

   - Improve the access interfaces to support detach and replace of an
     IOAS from an access

   - New selftests and a rework of how the selftests creates a mock
     iommu driver to be more like a real iommu driver"

Link: https://lore.kernel.org/lkml/ZO%2FTe6LU1ENf58ZW@nvidia.com/

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
  iommufd/selftest: Don't leak the platform device memory when unloading the module
  iommu/vt-d: Implement hw_info for iommu capability query
  iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
  iommufd: Add IOMMU_GET_HW_INFO
  iommu: Add new iommu op to get iommu hardware information
  iommu: Move dev_iommu_ops() to private header
  iommufd: Remove iommufd_ref_to_users()
  iommufd/selftest: Make the mock iommu driver into a real driver
  vfio: Support IO page table replacement
  iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
  iommufd: Add iommufd_access_replace() API
  iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
  iommufd: Add iommufd_access_change_ioas(_id) helpers
  iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
  vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
  iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
  iommufd/selftest: Return the real idev id from selftest mock_domain
  iommufd: Add IOMMU_HWPT_ALLOC
  iommufd/selftest: Test iommufd_device_replace()
  iommufd: Make destroy_rwsem use a lock class per object type
  ...

Pull VFIO updates from Alex Williamson:

 - VFIO direct character device (cdev) interface support. This extracts
   the vfio device fd from the container and group model, and is
   intended to be the native uAPI for use with IOMMUFD (Yi Liu)

 - Enhancements to the PCI hot reset interface in support of cdev usage
   (Yi Liu)

 - Fix a potential race between registering and unregistering vfio files
   in the kvm-vfio interface and extend use of a lock to avoid extra
   drop and acquires (Dmitry Torokhov)

 - A new vfio-pci variant driver for the AMD/Pensando Distributed
   Services Card (PDS) Ethernet device, supporting live migration (Brett
   Creeley)

 - Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
   and simplify driver init/exit in fsl code (Li Zetao)

 - Fix uninitialized hole in data structure and pad capability
   structures for alignment (Stefan Hajnoczi)

* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
  vfio/pds: Send type for SUSPEND_STATUS command
  vfio/pds: fix return value in pds_vfio_get_lm_file()
  pds_core: Fix function header descriptions
  vfio: align capability structures
  vfio/type1: fix cap_migration information leak
  vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
  vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
  vfio/pds: Add Kconfig and documentation
  vfio/pds: Add support for firmware recovery
  vfio/pds: Add support for dirty page tracking
  vfio/pds: Add VFIO live migration support
  vfio/pds: register with the pds_core PF
  pds_core: Require callers of register/unregister to pass PF drvdata
  vfio/pds: Initial support for pds VFIO driver
  vfio: Commonize combine_ranges for use in other VFIO drivers
  kvm/vfio: avoid bouncing the mutex when adding and deleting groups
  kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
  docs: vfio: Add vfio device cdev description
  vfio: Compile vfio_group infrastructure optionally
  vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Add locking to read/modify/write PCIe Capability Register accessors
     for Link Control and Root Control
   - Use pci_dev_id() when possible instead of manually composing ID
     from dev->bus->number and dev->devfn

  Resource management:
   - Move prototypes for __weak sysfs resource files to linux/pci.h to
     fix 'no previous prototype' warnings
   - Make more I/O port accesses depend on HAS_IOPORT
   - Use devm_platform_get_and_ioremap_resource() instead of open-coding
     platform_get_resource() followed by devm_ioremap_resource()

  Power management:
   - Ensure devices are powered up while accessing VPD
   - If device is powered-up, keep it that way while polling for PME
   - Only read PCI_PM_CTRL register when available, to avoid reading the
     wrong register and corrupting dev->current_state

  Virtualization:
   - Avoid Secondary Bus Reset on NVIDIA T4 GPUs

  Error handling:
   - Remove unused pci_disable_pcie_error_reporting()
   - Unexport pci_enable_pcie_error_reporting(), used only by aer.c
   - Unexport pcie_port_bus_type, used only by PCI core

  VGA:
   - Simplify and clean up typos in VGA arbiter

  Apple PCIe controller driver:
   - Initialize pcie->nvecs (number of available MSIs) before use

  Broadcom iProc PCIe controller driver:
   - Use of_property_read_bool() instead of low-level accessors for
     boolean properties

  Broadcom STB PCIe controller driver:
   - Assert PERST# when probing BCM2711 because some bootloaders don't
     do it

  Freescale i.MX6 PCIe controller driver:
   - Add .host_deinit() callback so we can clean up things like
     regulators on probe failure or driver unload

  Freescale Layerscape PCIe controller driver:
   - Add support for link-down notification so the endpoint driver can
     process LINK_DOWN events
   - Add suspend/resume support, including manual
     PME_Turn_off/PME_TO_Ack handshake
   - Save Link Capabilities during probe so they can be restored when
     handling a link-up event, since the controller loses the Link Width
     and Link Speed values during reset

  Intel VMD host bridge driver:
   - Fix disable of bridge windows during domain reset; previously we
     cleared the base/limit registers, which actually left the windows
     enabled

  Marvell MVEBU PCIe controller driver:
   - Remove unused busn member

  Microchip PolarFlare PCIe controller driver:
   - Fix interrupt bit definitions so the SEC and DED interrupt handlers
     work correctly
   - Make driver buildable as a module
   - Read FPGA MSI configuration parameters from hardware instead of
     hard-coding them

  Microsoft Hyper-V host bridge driver:
   - To avoid a NULL pointer dereference, skip MSI restore after
     hibernate if MSI/MSI-X hasn't been enabled

  NVIDIA Tegra194 PCIe controller driver:
   - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
     Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
     endpoints below a switch (because other devices below the switch
     might already be operating), which leads to 'Malformed TLP' errors

  Qualcomm PCIe controller driver:
   - Add DT and driver support for interconnect bandwidth voting for
     'pcie-mem' and 'cpu-pcie' interconnects
   - Fix broken SDX65 'compatible' DT property
   - Configure controller so MHI bus master clock will be switched off
     while in ASPM L1.x states
   - Use alignment restriction from EPF core in EPF MHI driver
   - Add Endpoint eDMA support
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driver
   - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
     latency
   - Add sa8775p DT binding and driver support

  Rockchip PCIe controller driver:
   - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
     upper 32 bits

  SiFive FU740 PCIe controller driver:
   - Set the supported number of MSI vectors so we can use all available
     MSI interrupts

  Synopsys DesignWare PCIe controller driver:
   - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
     dw_pcie_resume_noirq()) to be called by controller driver
     suspend/resume ops, and a controller callback to send PME_Turn_Off

  MicroSemi Switchtec management driver:
   - Add support for PCIe Gen5 devices

  Miscellaneous:
   - Reorder and compress to reduce size of struct pci_dev
   - Fix race in DOE destroy_work_on_stack()
   - Add stubs to avoid casts between incompatible function types
   - Explicitly include correct DT includes to untangle headers"

* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
  PCI: qcom-ep: Add ICC bandwidth voting support
  dt-bindings: PCI: qcom: ep: Add interconnects path
  PCI: qcom-ep: Treat unknown IRQ events as an error
  dt-bindings: PCI: qcom: Fix SDX65 compatible
  PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
  PCI: epf-mhi: Use iATU for small transfers
  PCI: epf-mhi: Add support for SM8450
  PCI: epf-mhi: Add eDMA support
  PCI: qcom-ep: Add eDMA support
  PCI: epf-mhi: Make use of the alignment restriction from EPF core
  PCI/PM: Only read PCI_PM_CTRL register when available
  PCI: qcom: Add support for sa8775p SoC
  dt-bindings: PCI: qcom: Add sa8775p compatible
  PCI: qcom-ep: Pass alignment restriction to the EPF core
  PCI: Simplify pcie_capability_clear_and_set_word() control flow
  PCI: Tidy config space save/restore messages
  PCI: Fix code formatting inconsistencies
  PCI: Fix typos in docs and comments
  PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
  PCI: Simplify pci_dev_driver()
  ...

Pull documentation updates from Jonathan Corbet:
 "Documentation work keeps chugging along; this includes:

   - Work from Carlos Bilbao to integrate rustdoc output into the
     generated HTML documentation. This took some work to figure out how
     to do it without slowing the docs build and without creating people
     who don't have Rust installed, but Carlos got there

   - Move the loongarch and mips architecture documentation under
     Documentation/arch/

   - Some more maintainer documentation from Jakub

  ... plus the usual assortment of updates, translations, and fixes"

* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
  Docu: genericirq.rst: fix irq-example
  input: docs: pxrc: remove reference to phoenix-sim
  Documentation: serial-console: Fix literal block marker
  docs/mm: remove references to hmm_mirror ops and clean typos
  docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
  Documentation: Fix typos
  Documentation/ABI: Fix typos
  scripts: kernel-doc: fix macro handling in enums
  scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
  Documentation: riscv: Update boot image header since EFI stub is supported
  Documentation: riscv: Add early boot document
  Documentation: arm: Add bootargs to the table of added DT parameters
  docs: kernel-parameters: Refer to the correct bitmap function
  doc: update params of memhp_default_state=
  docs: Add book to process/kernel-docs.rst
  docs: sparse: fix invalid link addresses
  docs: vfs: clean up after the iterate() removal
  docs: Add a section on surveys to the researcher guidelines
  docs: move mips under arch
  docs: move loongarch under arch
  ...

Pull clk subsystem updates from Stephen Boyd:
 "This pull request is full of clk driver changes. In fact, there aren't
  any changes to the clk framework this time around. That's probably
  because everyone was on vacation (yours truly included). We did lose a
  couple clk drivers this time around because nobody was using those
  devices. That skews the diffstat a bit, but either way, nothing looks
  out of the ordinary here. The usual suspects are chugging along adding
  support for more SoCs and fixing bugs.

  If I had to choose, I'd say the theme for the past few months has been
  "polish". There's quite a few patches that migrate to
  devm_platform_ioremap_resource() in here. And there's more than a
  handful of patches that move the NR_CLKS define from the DT binding
  header to the driver. There's even patches that migrate drivers to use
  clk_parent_data and clk_hw to describe clk tree topology. It seems
  that the spring (summer?) cleaning bug got some folks, or the
  semiconductor shortage finally hit the software side.

  New Drivers:
   - StarFive JH7110 SoC clock drivers
   - Qualcomm IPQ5018 Global Clock Controller driver
   - Versa3 clk generator to support 48KHz playback/record with audio
     codec on RZ/G2L SMARC EVK

  Removed Drivers:
   - Remove non-OF mmp clk drivers
   - Remove OXNAS clk driver

  Updates:
   - Add __counted_by to struct clk_hw_onecell_data and struct
     spmi_pmic_div_clk_cc
   - Move defines for numbers of clks (NR_CLKS) from DT headers to
     drivers
   - Introduce kstrdup_and_replace() and use it
   - Add PLL rates for Rockchip rk3568
   - Add the display clock tree for Rockchip rv1126
   - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Convert sun9i-mmc clock to use
     devm_platform_get_and_ioremap_resource()
   - Fix function name in a comment in ccu_mmc_timing.c
   - Parameter name correction for ccu_nkm_round_rate()
   - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
     consider alternative parent rates when determining clock rates
   - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
   - Support finding closest (as opposed to closest but not higher)
     clock rate for NM, NKM, mux and div type clocks, as use it for
     Allwinner A64 pll-video0
   - Prefer current parent rate if able to generate ideal clock rate for
     Allwinner NKM clocks
   - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
     moved out to the interconnect drivers
   - Fix various PM runtime bugs across many Qualcomm clk drivers
   - Migrate Qualcomm MDM9615 is to parent_hw and parent_data
   - Add network related resets on Qualcomm IPQ4019
   - Add a couple missing USB related clocks to Qualcomm IPQ9574
   - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
     controller
   - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
     and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
     corrected
   - Add missing GDSCs to and correct GDSCs for the SC8280XP global
     clock controller driver
   - Support retention for the Qualcomm SC8280XP display clock
     controller GDSCs.
   - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
     to fix issues with missing parent clocks across sc7180, sm7150,
     sm6350 and sm8250, while sm8450 is corrected to use floor ops
   - Correct Qualcomm SM6350 GPU clock controller's clock supplies
   - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
   - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
   - Change the delay in the Qualcomm reset controller to fsleep() for
     correctness
   - Extend the Qualcomm SM83550 Video clock controller to support
     SC8280XP
   - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
     R-Car H3, M3-W, and M3-N SoCs
   - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
   - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
   - Add the PDM IPC clock for i.MX93
   - Add 519.75MHz frequency support for i.MX9 PLL
   - Simplify the .determine_rate() implementation for i.MX GPR mux
   - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
   - Add the audio mux clock to i.MX8
   - Fix the SPLL2 MULT range for PLLv4
   - Update the SPLL2 type in i.MX8ULP
   - Fix the SAI4 clock on i.MX8MP
   - Add silicon revision print for i.MX25 on clocks init
   - Drop the return value from __mx25_clocks_init()
   - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
   - Drop restrictions for i.MX PLL14xx and fix its max prediv value
   - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
     allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
  clk: qcom: Fix SM_GPUCC_8450 dependencies
  clk: lmk04832: Support using PLL1_LD as SPI readback pin
  clk: lmk04832: Don't disable vco clock on probe fail
  clk: lmk04832: Set missing parent_names for output clocks
  clk: mvebu: Convert to devm_platform_ioremap_resource()
  clk: nuvoton: Convert to devm_platform_ioremap_resource()
  clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
  clk: ti: Use devm_platform_get_and_ioremap_resource()
  clk: mediatek: Convert to devm_platform_ioremap_resource()
  clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
  clk: gemini: Convert to devm_platform_ioremap_resource()
  clk: fsl-sai: Convert to devm_platform_ioremap_resource()
  clk: bm1880: Convert to devm_platform_ioremap_resource()
  clk: axm5516: Convert to devm_platform_ioremap_resource()
  clk: actions: Convert to devm_platform_ioremap_resource()
  clk: cdce925: Remove redundant of_match_ptr()
  clk: pxa910: Move number of clocks to driver source
  clk: pxa1928: Move number of clocks to driver source
  clk: pxa168: Move number of clocks to driver source
  clk: mmp2: Move number of clocks to driver source
  ...

Pull pin control updates from Linus Walleij:
 "We have some patches to DTS[I] files in arm and arm64 as well, that
  were merged here as DT headers were being changed.

  The most interesting stuff is the Intel Tangier chip support and
  AMLogic C3 in my opinion.

  No core changes this time.

  Drivers:

   - Intel Tangier SoC pin control support

   - AMLogic C3 SoC pin control support

   - Texas Instruments AM654 SoC pin control support

   - Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
     control support

   - Qualcomm PMX75 and PM7550BA (Power Management) pin control support

   - Qualcomm PMC8180 and PMC8180C (Power Management) pin control
     support

   - DROP the Oxnas driver as there is not enough of community interest
     to keep carrying this ARM(11) port

  Enhancements:

   - Bias control in the MT7986 pin control driver

   - Misc device tree binding enhancements such as the Broadcom 11351
     being converted to YAML

   - New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use

   - Clean up some SPDX headers

   - Handle non-unique devicetree subnode names in two Renesas drivers"

* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl: mlxbf3: Remove gpio_disable_free()
  pinctrl: use capital "OR" for multiple licenses in SPDX
  dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
  pinctrl: cherryview: fix address_space_handler() argument
  pinctrl: intel: consolidate ACPI dependency
  pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: mediatek: assign functions to configure pin bias on MT7986
  pinctrl: mediatek: fix pull_type data for MT7981
  dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
  dt-bindings: pinctrl: Drop 'phandle' properties
  pinctrl: lynxpoint: Make use of pm_ptr()
  pinctrl: baytrail: Make use of pm_ptr()
  pinctrl: intel: Switch to use exported namespace
  pinctrl: lynxpoint: reuse common functions from pinctrl-intel
  pinctrl: cherryview: reuse common functions from pinctrl-intel
  ...

Pull intel EDAC fixes from Tony Luck:

 - Old igen6 driver could lose pending events during initialization

 - Sapphire Rapids workstations have fewer memory controllers than their
   bigger siblings. This confused the driver.

* tag 'edac_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Fix the issue of no error events
  EDAC/i10nm: Skip the absent memory controllers

Pull IPMI updates from Corey Minyard:
 "Minor fixes for IPMI

  Lots of small unconnected things, memory leaks on error, a possible
  (though unlikely) deadlock, changes for updates to other things that
  have changed. Nothing earth-shattering, but things that need update"

* tag 'for-linus-6.6-1' of https://github.com/cminyard/linux-ipmi:
  ipmi_si: fix -Wvoid-pointer-to-enum-cast warning
  ipmi: fix potential deadlock on &kcs_bmc->lock
  ipmi_si: fix a memleak in try_smi_init()
  ipmi: Change request_module to request_module_nowait
  ipmi: make ipmi_class a static const structure
  ipmi:ssif: Fix a memory leak when scanning for an adapter
  ipmi:ssif: Add check for kstrdup
  dt-bindings: ipmi: aspeed,ast2400-kcs-bmc: drop unneeded quotes
  ipmi: Switch i2c drivers back to use .probe()
  ipmi_watchdog: Fix read syscall not responding to signals during sleep

Merge tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree include cleanups from Rob Herring:
 "These are the remaining few clean-ups of DT related includes which
  didn't get applied to subsystem trees"

* tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  ipmi: Explicitly include correct DT includes
  tpm: Explicitly include correct DT includes
  lib/genalloc: Explicitly include correct DT includes
  parport: Explicitly include correct DT includes
  sbus: Explicitly include correct DT includes
  mux: Explicitly include correct DT includes
  macintosh: Explicitly include correct DT includes
  hte: Explicitly include correct DT includes
  EDAC: Explicitly include correct DT includes
  clocksource: Explicitly include correct DT includes
  sparc: Explicitly include correct DT includes
  riscv: Explicitly include correct DT includes

Pull devicetree updates from Rob Herring:
 "DT core:

   - Add support for generating DT nodes for PCI devices. This is the
     groundwork for applying overlays to PCI devices containing
     non-discoverable downstream devices.

   - DT unittest additions to check reverted changesets, to test for
     refcount issues, and to test unresolved symbols. Also, various
     clean-ups of the unittest along the way.

   - Refactor node and property manipulation functions to better share
     code with old API and changeset API

   - Refactor changeset print functions to a common implementation

   - Move some platform_device specific functions into of_platform.c

  Bindings:

   - Treewide fixing of typos

   - Treewide clean-up of SPDX tags to use 'OR' consistently

   - Last chunk of dropping unnecessary quotes. With that, the check for
     unnecessary quotes is enabled in yamllint.

   - Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
     bindings to DT schema format

   - Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
     Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
     controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings

   - Fixes for Rockchip DWC PCI binding

   - Ensure all properties are evaluated on USB connector schema

   - Fix dt-check-compatible script to find of_device_id instances with
     compiler annotations"

* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
  dt-bindings: usb: Add V3s compatible string for OHCI
  dt-bindings: usb: Add V3s compatible string for EHCI
  dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
  dt-bindings: vendor-prefixes: document Saef Technology
  dt-bindings: thermal: lmh: update maintainer address
  of: unittest: Fix of_unittest_pci_node() kconfig dependencies
  dt-bindings: crypto: ice: Document sm8450 inline crypto engine
  dt-bindings: ufs: qcom: Add ICE to sm8450 example
  dt-bindings: ufs: qcom: Add sm6115 binding
  dt-bindings: ufs: qcom: Add reg-names property for ICE
  dt-bindings: yamllint: Enable quoted string check
  dt-bindings: Drop remaining unneeded quotes
  of: unittest-data: Fix whitespace - angular brackets
  of: unittest-data: Fix whitespace - indentation
  of: unittest-data: Fix whitespace - blank lines
  of: unittest-data: Convert remaining overlay DTS files to sugar syntax
  of: overlay: unittest: Add test for unresolved symbol
  of: unittest: Add separators to of_unittest_overlay_high_level()
  of: unittest: Cleanup partially-applied overlays
  of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
  ...

Pull ARM devicetree updates from Arnd Bergmann:
 "These are the devicetree updates for Arm and RISC-V based SoCs, mainly
  from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
  Starfive.

  Only a few new SoC got added:

   - TI AM62P5, a variant of the existing Sitara AM62x family

   - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
     SoC.

   - Qualcomm ipq5018 is used in wireless access points

   - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
     platform.

  In total, 29 machines get added, which is low because of the summer
  break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
  Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
  these are development and reference boards.

  Despite not adding a lot of new machines, there are over 700 patches
  in total, most of which are cleanups and minor fixes"

* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
  arm64: dts: use capital "OR" for multiple licenses in SPDX
  ARM: dts: use capital "OR" for multiple licenses in SPDX
  arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
  ARM: dts: qcom: apq8064: add support to gsbi4 uart
  riscv: dts: change TH1520 files to dual license
  riscv: dts: thead: add BeagleV Ahead board device tree
  dt-bindings: riscv: Add BeagleV Ahead board compatibles
  ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
  ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
  dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
  ARM: dts: stm32: support display on stm32f746-disco board
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
  ARM: dts: stm32: add pin map for LTDC on stm32f7
  ARM: dts: stm32: add ltdc support on stm32f746 MCU
  arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sdm670: Add PDC
  riscv: dts: starfive: fix jh7110 qspi sort order
  ...

Pull ARM SoC cleanups from Arnd Bergmann:
 "These are all minor cleanups for platform specific code in arch/arm/
  and some of the associated drivers. The majority of these are work
  done by Rob Herring to improve the way devicetreee header files are
  handled"

* tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
  ARM: davinci: Drop unused includes
  ARM: s5pv210: Explicitly include correct DT includes
  ARM: dove: Drop unused includes
  ARM: mvebu: Explicitly include correct DT includes
  Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung
  MAINTAINER: samsung: document dtbs_check requirement for Samsung
  Documentation/process: maintainer-soc: add clean platforms profile
  MAINTAINERS: soc: reference maintainer profile
  ARM: nspire: Remove unused header file mmio.h
  ARM: nspire: Use syscon-reboot to handle restart
  soc: fsl: Explicitly include correct DT includes
  soc: xilinx: Explicitly include correct DT includes
  soc: sunxi: Explicitly include correct DT includes
  soc: rockchip: Explicitly include correct DT includes
  soc: mediatek: Explicitly include correct DT includes
  soc: aspeed: Explicitly include correct DT includes
  firmware: Explicitly include correct DT includes
  bus: Explicitly include correct DT includes
  ARM: spear: Explicitly include correct DT includes
  ARM: mvebu: Explicitly include correct DT includes
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "Various additions to the defconfig files to enable more drivers for
  already supported platforms, usually as loadable modules"

* tag 'soc-defconfig-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  ARM: multi_v7_defconfig: Add SCMI regulator support
  ARM: multi_v7_defconfig: Enable OMAP audio/display support
  ARM: multi_v7_defconfig: Enable TI Remoteproc and related configs
  ARM: multi_v7_defconfig: Enable TLV320AIC3x
  arm64: defconfig: Enable Redpine 91X wlan driver
  arm64: defconfig: Enable ITE_IT66121 HDMI transmitter
  arm64: defconfig: Enable IPQ5018 SoC base configs
  arm64: defconfig: Enable CONFIG_DRM_IMX_LCDIF
  arm64: defconfig: Enable TI PRUSS
  arm64: defconfig: Enable various configs for TI K3 platforms
  arm64: defconfig: enable driver for bluetooth nxp uart
  arm64: defconfig: Enable i.MX93 devices
  arm64: defconfig: Enable drivers for the Odroid-M1 board
  arm64: defconfig: Enable GPIO_SYSCON
  arm64: defconfig: select IMX_REMOTEPROC and RPMSG_VIRTIO
  arm64: defconfig: enable SL28VPD NVMEM layout
  arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
  arm64: defconfig: Enable Rockchip OTP memory driver
  arm64: defconfig: Enable PHY_ROCKCHIP_NANENG_COMBO_PHY
  arm64: defconfig: Enable PMIC RAA215300 and RTC ISL 1208 configs
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...

Pull ARM SoC generic power domain driver updates from Ulf Hansson:
 "This adds a new subsystem for generic power domain providers in
  drivers/genpd and starts moving some of the corresponding code in
  there.

  We have currently ~60 users of the genpd provider interface, which are
  sprinkled across various subsystems. To release some burden from the
  soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
  better overall view of what goes on in the area, I will help out with
  maintenance"

[ I find the "genpd" name singularly uninformative, so we'll probably
  end up moving this driver subsystem somewhere else, but that's still
  being discussed  - Linus ]

* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
  genpd: ti: Use for_each_node_with_property() simplify code logic
  genpd: Explicitly include correct DT includes
  genpd: imx: scu-pd: initialize is_off according to HW state
  genpd: imx: scu-pd: Suppress bind attrs
  genpd: imx: scu-pd: do not power off console if no_console_suspend
  genpd: imx: scu-pd: add more PDs
  genpd: imx: scu-pd: enlarge PD range
  genpd: imx: relocate scu-pd under genpd
  MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
  genpd: Makefile: build imx
  genpd: move owl-sps-helper.c from drivers/soc
  soc: starfive: remove stale Makefile entry
  ARM: ux500: Move power-domain driver to the genpd dir
  ARM: ux500: Convert power-domain code into a regular platform driver
  soc: xilinx: Move power-domain driver to the genpd dir
  soc: ti: Mover power-domain drivers to the genpd dir
  soc: tegra: Move powergate-bpmp driver to the genpd dir
  soc: sunxi: Move power-domain driver to the genpd dir
  soc: starfive: Move the power-domain driver to the genpd dir
  soc: samsung: Move power-domain driver to the genpd dir
  ...

* clk-qcom: (87 commits)
  clk: qcom: Fix SM_GPUCC_8450 dependencies
  clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
  clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
  clk: qcom: gcc-ipq5018: change some variable static
  clk: qcom: gcc-ipq4019: add missing networking resets
  dt-bindings: clock: qcom: ipq4019: add missing networking resets
  clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
  dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
  clk: qcom: gcc-qdu1000: Update the RCGs ops
  clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
  clk: qcom: gcc-qdu1000: Add support for GDSCs
  clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
  clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
  clk: qcom: gcc-qdu1000: Fix clkref clocks handling
  clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
  dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
  clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
  clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
  clk: qcom: ipq5332: drop the mem noc clocks
  clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
  ...

 - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
 - Remove non-OF mmp clk drivers
 - Move number of clks from DT headers to drivers

* clk-imx:
  clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
  clk: imx: pll14xx: align pdiv with reference manual
  clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
  clk: imx25: make __mx25_clocks_init return void
  clk: imx25: print silicon revision during init
  dt-bindings: clocks: imx8mp: make sai4 a dummy clock
  clk: imx8mp: fix sai4 clock
  clk: imx: imx8ulp: update SPLL2 type
  clk: imx: pllv4: Fix SPLL2 MULT range
  clk: imx: imx8: add audio clock mux driver
  dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
  clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
  clk: imx: clk-gpr-mux: Simplify .determine_rate()
  clk: imx: Add 519.75MHz frequency support for imx9 pll
  clk: imx93: Add PDM IPG clk
  dt-bindings: clock: imx93: Add PDM IPG clk

* clk-samsung:
  dt-bindings: clock: samsung: remove define with number of clocks
  clk: samsung: exynoautov9: do not define number of clocks in bindings
  clk: samsung: exynos850: do not define number of clocks in bindings
  clk: samsung: exynos7885: do not define number of clocks in bindings
  clk: samsung: exynos5433: do not define number of clocks in bindings
  clk: samsung: exynos5420: do not define number of clocks in bindings
  clk: samsung: exynos5410: do not define number of clocks in bindings
  clk: samsung: exynos5260: do not define number of clocks in bindings
  clk: samsung: exynos5250: do not define number of clocks in bindings
  clk: samsung: exynos4: do not define number of clocks in bindings
  clk: samsung: exynos3250: do not define number of clocks in bindings

* clk-annotate:
  clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by
  clk: Annotate struct clk_hw_onecell_data with __counted_by

* clk-marvell:
  clk: pxa910: Move number of clocks to driver source
  clk: pxa1928: Move number of clocks to driver source
  clk: pxa168: Move number of clocks to driver source
  clk: mmp2: Move number of clocks to driver source
  clk: mmp: Remove old non-OF clock drivers

* clk-lmk:
  clk: lmk04832: Support using PLL1_LD as SPI readback pin
  clk: lmk04832: Don't disable vco clock on probe fail
  clk: lmk04832: Set missing parent_names for output clocks

Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and 'clk-rockchip' into clk-next

 - Add Versa3 clk generator to support 48KHz playback/record with audio
   codec on RZ/G2L SMARC EVK
 - Introduce kstrdup_and_replace() and use it

* clk-versa:
  clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
  clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
  clk: versaclock3: Switch to use i2c_driver's probe callback
  clk: Add support for versa3 clock driver
  dt-bindings: clock: Add Renesas versa3 clock generator bindings

* clk-strdup:
  clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
  lib/string_helpers: Add kstrdup_and_replace() helper

* clk-amlogic: (22 commits)
  dt-bindings: soc: amlogic: document System Control registers
  dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
  dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
  clk: meson: axg-audio: move bindings include to main driver
  clk: meson: meson8b: move bindings include to main driver
  clk: meson: a1: move bindings include to main driver
  clk: meson: eeclk: move bindings include to main driver
  clk: meson: aoclk: move bindings include to main driver
  dt-bindings: clk: axg-audio-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
  dt-bindings: clk: meson8b-clkc: expose all clock ids
  dt-bindings: clk: g12a-aoclkc: expose all clock ids
  dt-bindings: clk: g12a-clks: expose all clock ids
  dt-bindings: clk: axg-clkc: expose all clock ids
  dt-bindings: clk: gxbb-clkc: expose all clock ids
  clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
  ...

* clk-allwinner:
  clk: sunxi-ng: nkm: Prefer current parent rate
  clk: sunxi-ng: a64: select closest rate for pll-video0
  clk: sunxi-ng: div: Support finding closest rate
  clk: sunxi-ng: mux: Support finding closest rate
  clk: sunxi-ng: nkm: Support finding closest rate
  clk: sunxi-ng: nm: Support finding closest rate
  clk: sunxi-ng: Add helper function to find closest rate
  clk: sunxi-ng: Add feature to find closest rate
  clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
  clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
  clk: sunxi-ng: nkm: Use correct parameter name for parent HW
  clk: sunxi-ng: Modify mismatched function name
  clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()

* clk-rockchip:
  clk: rockchip: rv1126: Add PD_VO clock tree
  clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
  clk: rockchip: rk3568: Add PLL rate for 101MHz

Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and 'clk-cleanup' into clk-next

 - Remove OXNAS clk driver

* clk-bindings:
  dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml
  dt-bindings: clock: xlnx,versal-clk: drop select:false
  dt-bindings: clock: versal: Add versal-net compatible string
  dt-bindings: clock: ast2600: Add I3C and MAC reset definitions
  dt-bindings: arm: hisilicon,cpuctrl: Merge "hisilicon,hix5hd2-clock" into parent binding

* clk-starfive:
  reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support
  clk: starfive: Simplify .determine_rate()
  clk: starfive: Add StarFive JH7110 Video-Output clock driver
  clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver
  clk: starfive: Add StarFive JH7110 System-Top-Group clock driver
  clk: starfive: jh7110-sys: Add PLL clocks source from DTS
  clk: starfive: Add StarFive JH7110 PLL clock driver
  dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
  dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
  dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
  dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs
  dt-bindings: soc: starfive: Add StarFive syscon module
  dt-bindings: clock: Add StarFive JH7110 PLL clock generator

* clk-rm:
  dt-bindings: clk: oxnas: remove obsolete bindings
  clk: oxnas: remove obsolete clock driver

* clk-renesas:
  clk: renesas: rcar-gen3: Add ADG clocks
  clk: renesas: r8a77965: Add 3DGE and ZG support
  clk: renesas: r8a7796: Add 3DGE and ZG support
  clk: renesas: r8a7795: Add 3DGE and ZG support
  clk: renesas: emev2: Remove obsolete clkdev registration
  clk: renesas: r9a07g043: Add MTU3a clock and reset entry
  clk: renesas: rzg2l: Simplify .determine_rate()
  clk: renesas: r9a09g011: Add CSI related clocks
  clk: renesas: r8a774b1: Add 3DGE and ZG support
  clk: renesas: r8a774e1: Add 3DGE and ZG support
  clk: renesas: r8a774a1: Add 3DGE and ZG support
  clk: renesas: rcar-gen3: Add support for ZG clock

* clk-cleanup:
  clk: mvebu: Convert to devm_platform_ioremap_resource()
  clk: nuvoton: Convert to devm_platform_ioremap_resource()
  clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
  clk: ti: Use devm_platform_get_and_ioremap_resource()
  clk: mediatek: Convert to devm_platform_ioremap_resource()
  clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
  clk: gemini: Convert to devm_platform_ioremap_resource()
  clk: fsl-sai: Convert to devm_platform_ioremap_resource()
  clk: bm1880: Convert to devm_platform_ioremap_resource()
  clk: axm5516: Convert to devm_platform_ioremap_resource()
  clk: actions: Convert to devm_platform_ioremap_resource()
  clk: cdce925: Remove redundant of_match_ptr()
  drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
  clk: Explicitly include correct DT includes

Pull sound updates from Takashi Iwai:
 "We've received a fairly wide range of changes at this time, including
  for ALSA and ASoC core, but all of them are rather small changes.

  Here are some highlights:

  ALSA / ASoC Core:
   - Fixes of inconsistent locking around control API helpers
   - A few new control API functions and cleanups
   - Workarounds for potential UAFs by delayed kobj releases
   - Unified PCM copy ops with iov_iter
   - Continued efforts for ASoC API cleanups

  ASoC:
   - An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
     some IIO changes
   - Create a library function for intlog10() and use it in the NAU8825
     driver
   - Convert drivers to use the more modern maple tree register cache
   - Lots of work on the SOF framework, AMD and Intel drivers, including
     a lot of cleanup and new device support
   - Standardization of the presentation of jacks from drivers
   - Provision of some generic sound card DT properties
   - Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
     AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
     platforms including AVS machines with ES8336 and RT5663, Mediatek
     MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110

  Others:
   - New test coverage including ASoC and topology tests in KUnit; this
     also involves enabling UML builds of ALSA since that's the default
     KUnit test environment which pulls in the addition of some stubs to
     the driver
   - More enhancement of pcmtest driver
   - A few fixes / enhancements of MIDI 2.0 UMP core
   - Using PCI definitions in allover HD-audio code
   - Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
   - CS35L41 HD-audio sub-codec improvements
   - Continued emu10k1 improvements"

* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
  ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
  ASoC: dwc: i2s: Fix unused functions
  ALSA: usb-audio: Don't try to submit URBs after disconnection
  ALSA: emu10k1: add separate documentation for E-MU cards
  ALSA: emu10k1: more documentation updates
  ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
  ALSA: ump: Fix -Wformat-truncation warnings
  ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
  ALSA: doc: Fix missing backquote in midi-2.0.rst
  ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
  ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
  ASoC: soc-core.c: Do not error if a DAI link component is not found
  ASoC: codecs: Fix error code in aw88261_i2c_probe()
  ASoC: audio-graph-card.c: move audio_graph_parse_of()
  ASoC: cs42l43: Use new-style PM runtime macros
  ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
  ALSA: ump: Don't create unused substreams for static blocks
  ALSA: ump: Fill group names for legacy rawmidi substreams
  ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
  ALSA: ac97: Fix possible error value of *rac97
  ...

Pull drm updates from Dave Airlie:
 "The drm core grew a new generic gpu virtual address manager, and new
  execution locking helpers. These are used by nouveau now to provide
  uAPI support for the userspace Vulkan driver. AMD had a bunch of new
  IP core support, loads of refactoring around fbdev, but mostly just
  the usual amount of stuff across the board.

  core:
   - fix gfp flags in drmm_kmalloc

  gpuva:
   - add new generic GPU VA manager (for nouveau initially)

  syncobj:
   - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl

  dma-buf:
   - acquire resv lock for mmap() in exporters
   - support dma-buf self import automatically
   - docs fixes

  backlight:
   - fix fbdev interactions

  atomic:
   - improve logging

  prime:
   - remove struct gem_prim_mmap plus driver updates

  gem:
   - drm_exec: add locking over multiple GEM objects
   - fix lockdep checking

  fbdev:
   - make fbdev userspace interfaces optional
   - use linux device instead of fbdev device
   - use deferred i/o helper macros in various drivers
   - Make FB core selectable without drivers
   - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
   - Add helper macros and Kconfig tokens for DMA-allocated framebuffer

  ttm:
   - support init_on_free
   - swapout fixes

  panel:
   - panel-edp: Support AUO B116XAB01.4
   - Support Visionox R66451 plus DT bindings
   - ld9040:
      - Backlight support
      - magic improved
      - Kconfig fix
   - Convert to of_device_get_match_data()
   - Fix Kconfig dependencies
   - simple:
      - Set bpc value to fix warning
      - Set connector type for AUO T215HVN01
      - Support Innolux G156HCE-L01 plus DT bindings
   - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
   - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
   - sitronix-st7789v:
      - Support Inanbo T28CP45TN89 plus DT bindings
      - Support EDT ET028013DMA plus DT bindings
      - Various cleanups
   - edp: Add timings for N140HCA-EAC
   - Allow panels and touchscreens to power sequence together
   - Fix Innolux G156HCE-L01 LVDS clock

  bridge:
   - debugfs for chains support
   - dw-hdmi:
      - Improve support for YUV420 bus format
      - CEC suspend/resume
      - update EDID on HDMI detect
   - dw-mipi-dsi: Fix enable/disable of DSI controller
   - lt9611uxc: Use MODULE_FIRMWARE()
   - ps8640: Remove broken EDID code
   - samsung-dsim: Fix command transfer
   - tc358764:
      - Handle HS/VS polarity
      - Use BIT() macro
      - Various cleanups
   - adv7511: Fix low refresh rate
   - anx7625:
      - Switch to macros instead of hardcoded values
      - locking fixes
   - tc358767: fix hardware delays
   - sitronix-st7789v:
      - Support panel orientation
      - Support rotation property
      - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings

  amdgpu:
   - SDMA 6.1.0 support
   - HDP 6.1 support
   - SMUIO 14.0 support
   - PSP 14.0 support
   - IH 6.1 support
   - Lots of checkpatch cleanups
   - GFX 9.4.3 updates
   - Add USB PD and IFWI flashing documentation
   - GPUVM updates
   - RAS fixes
   - DRR fixes
   - FAMS fixes
   - Virtual display fixes
   - Soft IH fixes
   - SMU13 fixes
   - Rework PSP firmware loading for other IPs
   - Kernel doc fixes
   - DCN 3.0.1 fixes
   - LTTPR fixes
   - DP MST fixes
   - DCN 3.1.6 fixes
   - SMU 13.x fixes
   - PSP 13.x fixes
   - SubVP fixes
   - GC 9.4.3 fixes
   - Display bandwidth calculation fixes
   - VCN4 secure submission fixes
   - Allow building DC on RISC-V
   - Add visible FB info to bo_print_info
   - HBR3 fixes
   - GFX9 MCBP fix
   - GMC10 vmhub index fix
   - GMC11 vmhub index fix
   - Create a new doorbell manager
   - SR-IOV fixes
   - initial freesync panel replay support
   - revert zpos properly until igt regression is fixeed
   - use TTM to manage doorbell BAR
   - Expose both current and average power via hwmon if supported

  amdkfd:
   - Cleanup CRIU dma-buf handling
   - Use KIQ to unmap HIQ
   - GFX 9.4.3 debugger updates
   - GFX 9.4.2 debugger fixes
   - Enable cooperative groups fof gfx11
   - SVM fixes
   - Convert older APUs to use dGPU path like newer APUs
   - Drop IOMMUv2 path as it is no longer used
   - TBA fix for aldebaran

  i915:
   - ICL+ DSI modeset sequence
   - HDCP improvements
   - MTL display fixes and cleanups
   - HSW/BDW PSR1 restored
   - Init DDI ports in VBT order
   - General display refactors
   - Start using plane scale factor for relative data rate
   - Use shmem for dpt objects
   - Expose RPS thresholds in sysfs
   - Apply GuC SLPC min frequency softlimit correctly
   - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
   - Fix a VMA UAF for multi-gt platform
   - Do not use stolen on MTL due to HW bug
   - Check HuC and GuC version compatibility on MTL
   - avoid infinite GPU waits due to premature release of request memory
   - Fixes and updates for GSC memory allocation
   - Display SDVO fixes
   - Take stolen handling out of FBC code
   - Make i915_coherent_map_type GT-centric
   - Simplify shmem_create_from_object map_type

  msm:
   - SM6125 MDSS support
   - DPU: SM6125 DPU support
   - DSI: runtime PM support, burst mode support
   - DSI PHY: SM6125 support in 14nm DSI PHY driver
   - GPU: prepare for a7xx
   - fix a690 firmware
   - disable relocs on a6xx and newer

  radeon:
   - Lots of checkpatch cleanups

  ast:
   - improve device-model detection
   - Represent BMV as virtual connector
   - Report DP connection status

  nouveau:
   - add new exec/bind interface to support Vulkan
   - document some getparam ioctls
   - improve VRAM detection
   - various fixes/cleanups
   - workraound DPCD issues

  ivpu:
   - MMU updates
   - debugfs support
   - Support vpu4

  virtio:
   - add sync object support

  atmel-hlcdc:
   - Support inverted pixclock polarity

  etnaviv:
   - runtime PM cleanups
   - hang handling fixes

  exynos:
   - use fbdev DMA helpers
   - fix possible NULL ptr dereference

  komeda:
   - always attach encoder

  omapdrm:
   - use fbdev DMA helpers
ingenic:
   - kconfig regmap fixes

  loongson:
   - support display controller

  mediatek:
   - Small mtk-dpi cleanups
   - DisplayPort: support eDP and aux-bus
   - Fix coverity issues
   - Fix potential memory leak if vmap() fail

  mgag200:
   - minor fixes

  mxsfb:
   - support disabling overlay planes

  panfrost:
   - fix sync in IRQ handling

  ssd130x:
   - Support per-controller default resolution plus DT bindings
   - Reduce memory-allocation overhead
   - Improve intermediate buffer size computation
   - Fix allocation of temporary buffers
   - Fix pitch computation
   - Fix shadow plane allocation

  tegra:
   - use fbdev DMA helpers
   - Convert to devm_platform_ioremap_resource()
   - support bridge/connector
   - enable PM

  tidss:
   - Support TI AM625 plus DT bindings
   - Implement new connector model plus driver updates

  vkms:
   - improve write back support
   - docs fixes
   - support gamma LUT

  zynqmp-dpsub:
   - misc fixes"

* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
  drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
  drm/tests/drm_kunit_helpers: Place correct function name in the comment header
  drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
  drm/nouveau: uvmm: fix unset region pointer on remap
  drm/nouveau: sched: avoid job races between entities
  drm/i915: Fix HPD polling, reenabling the output poll work as needed
  drm: Add an HPD poll helper to reschedule the poll work
  drm/i915: Fix TLB-Invalidation seqno store
  drm/ttm/tests: Fix type conversion in ttm_pool_test
  drm/msm/a6xx: Bail out early if setting GPU OOB fails
  drm/msm/a6xx: Move LLC accessors to the common header
  drm/msm/a6xx: Introduce a6xx_llc_read
  drm/ttm/tests: Require MMU when testing
  drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
  Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
  drm/amdgpu: Add memory vendor information
  drm/amd: flush any delayed gfxoff on suspend entry
  drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
  drm/amdgpu: Remove gfxoff check in GFX v9.4.3
  drm/amd/pm: Update pci link speed for smu v13.0.6
  ...

Pull xfs updates from Chandan Babu:

 - Chandan Babu will be taking over as the XFS release manager. He has
   reviewed all the patches that are in this branch, though I'm signing
   the branch one last time since I'm still technically maintainer. :P

 - Create a maintainer entry profile for XFS in which we lay out the
   various roles that I have played for many years.  Aside from release
   manager, the remaining roles are as yet unfilled.

 - Start merging online repair -- we now have in-memory pageable memory
   for staging btrees, a bunch of pending fixes, and we've started the
   process of refactoring the scrub support code to support more of
   repair.  In particular, reaping of old blocks from damaged structures.

 - Scrub the realtime summary file.

 - Fix a bug where scrub's quota iteration only ever returned the root
   dquot.  Oooops.

 - Fix some typos.

[ Pull request from Chandan Babu, but signed tag and description from
  Darrick Wong, thus the first person singular above is Darrick, not
  Chandan ]

* tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (37 commits)
  fs/xfs: Fix typos in comments
  xfs: fix dqiterate thinko
  xfs: don't check reflink iflag state when checking cow fork
  xfs: simplify returns in xchk_bmap
  xfs: rewrite xchk_inode_is_allocated to work properly
  xfs: hide xfs_inode_is_allocated in scrub common code
  xfs: fix agf_fllast when repairing an empty AGFL
  xfs: allow userspace to rebuild metadata structures
  xfs: clear pagf_agflreset when repairing the AGFL
  xfs: allow the user to cancel repairs before we start writing
  xfs: don't complain about unfixed metadata when repairs were injected
  xfs: implement online scrubbing of rtsummary info
  xfs: always rescan allegedly healthy per-ag metadata after repair
  xfs: move the realtime summary file scrubber to a separate source file
  xfs: wrap ilock/iunlock operations on sc->ip
  xfs: get our own reference to inodes that we want to scrub
  xfs: track usage statistics of online fsck
  xfs: improve xfarray quicksort pivot
  xfs: create scaffolding for creating debugfs entries
  xfs: cache pages used for xfarray quicksort convergence
  ...

Pull fsnotify update from Jan Kara:
 "Just a small fsnotify cleanup this time"

* tag 'fsnotify_for_v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: Remove unused extern declaration fsnotify_get_conn_fsid()

Pull ext2, quota, and udf updates from Jan Kara:

 - fixes for possible use-after-free issues with quota when racing with
   chown

 - fixes for ext2 crashing when xattr allocation races with another
   block allocation to the same file from page writeback code

 - fix for block number overflow in ext2

 - marking of reiserfs as obsolete in MAINTAINERS

 - assorted minor cleanups

* tag 'for_v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Fix kernel-doc warnings
  ext2: improve consistency of ext2_fsblk_t datatype usage
  ext2: dump current reservation window info
  ext2: fix race between setxattr and write back
  ext2: introduce new flags argument for ext2_new_blocks()
  ext2: remove ext2_new_block()
  ext2: fix datatype of block number in ext2_xattr_set2()
  udf: Drop pointless aops assignment
  quota: use lockdep_assert_held_write in dquot_load_quota_sb
  MAINTAINERS: change reiserfs status to obsolete
  udf: Fix -Wstringop-overflow warnings
  quota: simplify drop_dquot_ref()
  quota: fix dqput() to follow the guarantees dquot_srcu should provide
  quota: add new helper dquot_active()
  quota: rename dquot_active() to inode_quota_active()
  quota: factor out dquot_write_dquot()
  ext2: remove redundant assignment to variable desc and variable best_desc

Pull overlayfs updates from Amir Goldstein:

 - add verification feature needed by composefs (Alexander Larsson)

 - improve integration of overlayfs and fanotify (Amir Goldstein)

 - fortify some overlayfs code (Andrea Righi)

* tag 'ovl-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: validate superblock in OVL_FS()
  ovl: make consistent use of OVL_FS()
  ovl: Kconfig: introduce CONFIG_OVERLAY_FS_DEBUG
  ovl: auto generate uuid for new overlay filesystems
  ovl: store persistent uuid/fsid with uuid=on
  ovl: add support for unique fsid per instance
  ovl: support encoding non-decodable file handles
  ovl: Handle verity during copy-up
  ovl: Validate verity xattr when resolving lowerdata
  ovl: Add versioned header for overlay.metacopy xattr
  ovl: Add framework for verity support

Pull x86 apic updates from Dave Hansen:
 "This includes a very thorough rework of the 'struct apic' handlers.
  Quite a variety of them popped up over the years, especially in the
  32-bit days when odd apics were much more in vogue.

  The end result speaks for itself, which is a removal of a ton of code
  and static calls to replace indirect calls.

  If there's any breakage here, it's likely to be around the 32-bit
  museum pieces that get light to no testing these days.

  Summary:

   - Rework apic callbacks, getting rid of unnecessary ones and
     coalescing lots of silly duplicates.

   - Use static_calls() instead of indirect calls for apic->foo()

   - Tons of cleanups an crap removal along the way"

* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  x86/apic: Turn on static calls
  x86/apic: Provide static call infrastructure for APIC callbacks
  x86/apic: Wrap IPI calls into helper functions
  x86/apic: Mark all hotpath APIC callback wrappers __always_inline
  x86/xen/apic: Mark apic __ro_after_init
  x86/apic: Convert other overrides to apic_update_callback()
  x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
  x86/apic: Provide apic_update_callback()
  x86/xen/apic: Use standard apic driver mechanism for Xen PV
  x86/apic: Provide common init infrastructure
  x86/apic: Wrap apic->native_eoi() into a helper
  x86/apic: Nuke ack_APIC_irq()
  x86/apic: Remove pointless arguments from [native_]eoi_write()
  x86/apic/noop: Tidy up the code
  x86/apic: Remove pointless NULL initializations
  x86/apic: Sanitize APIC ID range validation
  x86/apic: Prepare x2APIC for using apic::max_apic_id
  x86/apic: Simplify X2APIC ID validation
  x86/apic: Add max_apic_id member
  x86/apic: Wrap APIC ID validation into an inline
  ...

Pull x86 core updates from Thomas Gleixner:

 - Prevent kprobes on compiler generated CFI checking code.

   The compiler generates an instruction sequence for indirect call
   checks. If this sequence is modified with a kprobe, then the check
   fails. So the instructions must be protected against probing.

 - A few minor cleanups for the SMP code

* tag 'x86-core-2023-08-30-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Prohibit probing on compiler generated CFI checking code
  x86/smpboot: Change smp_store_boot_cpu_info() to static
  x86/smp: Remove a non-existent function declaration
  x86/smpboot: Remove a stray comment about CPU hotplug

Pull x86 mm updates from Dave Hansen:
 "A pair of small x86/mm updates. The INVPCID one is purely a cleanup.
  The PAT one fixes a real issue, albeit a relatively obscure one
  (graphics device passthrough under Xen). The fix also makes the code
  much more readable.

  Summary:

   - Remove unnecessary "INVPCID single" feature tracking

   - Include PAT in page protection modify mask"

* tag 'x86_mm_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove "INVPCID single" feature tracking
  x86/mm: Fix PAT bit missing from page protection modify mask

Intel CPUs ship with ERMS for over a decade, but this is not true for
AMD.  In particular one reasonably recent uarch (EPYC 7R13) does not
have it (or at least the bit is inactive when running on the Amazon EC2
cloud -- I found rather conflicting information about AMD CPUs vs the
extension).

Hand-rolled mov loops executing in this case are quite pessimal compared
to rep movsq for bigger sizes.  While the upper limit depends on uarch,
everyone is well south of 1KB AFAICS and sizes bigger than that are
common.

While technically ancient CPUs may be suffering from rep usage, gcc has
been emitting it for years all over kernel code, so I don't think this
is a legitimate concern.

Sample result from read1_processes from will-it-scale (4KB reads/s):

  before:   1507021
  after:    1721828 (+14%)

Note that the cutoff point for rep usage is set to 64 bytes, which is
way too conservative but I'm sticking to what was done in 47ee3f1d
("x86: re-introduce support for ERMS copies for user space accesses").
That is to say *some* copies will now go slower, which is fixable but
beyond the scope of this patch.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smack updates from Casey Schaufler:
 "Two minor fixes: is a simple spelling fix. The other is a bounds check
  for a very likely underflow"

* tag 'Smack-for-6.6' of https://github.com/cschaufler/smack-next:
  smackfs: Prevent underflow in smk_set_cipso()
  security: smack: smackfs: fix typo (lables->labels)