- 23 Nov, 2023 2 commits
-
-
Arnd Bergmann authored
When the NVME target code is built-in but its TCP frontend is a loadable module, enabling keyring support causes a link failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a2110): undefined reference to `nvme_keyring_id' The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from it inherits the state of the tristate symbol rather than the intended CONFIG_NVME_TARGET one that contains the actual call. The same thing is true for CONFIG_KEYS, which itself is required for NVME_KEYRING. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231122224719.4042108-3-arnd@kernel.orgSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Arnd Bergmann authored
In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring code might not be available, or using it will result in a runtime failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a2110): undefined reference to `nvme_keyring_id' Add a check to ensure we only check the keyring if there is a chance of it being used, which avoids both the runtime and link-time problems. Signed-off-by:
-
- 22 Nov, 2023 2 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.7 - TCP TLS fixes (Hannes) - Authentifaction fixes (Mark, Hannes) - Properly terminate target names (Christoph)" * tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme: nvme: move nvme_stop_keep_alive() back to original position nvmet-tcp: always initialize tls_handshake_tmo_work nvmet: nul-terminate the NQNs passed in the connect command nvme: blank out authentication fabrics options if not configured nvme: catch errors from nvme_configure_metadata() nvme-tcp: only evaluate 'tls' option if TLS is selected nvme-auth: set explanation code for failure2 msgs nvme-auth: unlock mutex in one place only
-
Hannes Reinecke authored
Stopping keep-alive not only stops the keep-alive workqueue, but also needs to be synchronized with I/O termination as we must not send a keep-alive command after all I/O had been terminated. So to avoid any regressions move the call to stop_keep_alive() back to its original position and ensure that keep-alive is correctly stopped failing to setup the admin queue. Fixes: 4733b65d ("nvme: start keep-alive after admin queue setup") Suggested-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Keith Busch <kbusch@kernel.org>
-
- 21 Nov, 2023 1 commit
-
-
Li Nan authored
If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be krealloc in nbd_add_socket(), and a garbage request is received now, a UAF may occurs. T1 nbd_ioctl __nbd_ioctl nbd_add_socket blk_mq_freeze_queue T2 recv_work nbd_read_reply sock_xmit krealloc config->socks def config->socks Pass nbd_sock to nbd_read_reply(). And introduce a new function sock_xmit_recv(), which differs from sock_xmit only in the way it get socket. ================================================================== BUG: KASAN: use-after-free in sock_xmit+0x525/0x550 Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779 Workqueue: knbd4-recv recv_work Call Trace: __dump_stack dump_stack+0xbe/0xfd print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 sock_xmit+0x525/0x550 nbd_read_reply+0xfe/0x2c0 recv_work+0x1c2/0x750 process_one_work+0x6b6/0xf10 worker_thread+0xdd/0xd80 kthread+0x30a/0x410 ret_from_fork+0x22/0x30 Allocated by task 18784: kasan_save_stack+0x1b/0x40 kasan_set_track set_alloc_info __kasan_kmalloc __kasan_kmalloc.constprop.0+0xf0/0x130 slab_post_alloc_hook slab_alloc_node slab_alloc __kmalloc_track_caller+0x157/0x550 __do_krealloc krealloc+0x37/0xb0 nbd_add_socket +0x2d3/0x880 __nbd_ioctl nbd_ioctl+0x584/0x8e0 __blkdev_driver_ioctl blkdev_ioctl+0x2a0/0x6e0 block_ioctl+0xee/0x130 vfs_ioctl __do_sys_ioctl __se_sys_ioctl+0x138/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Freed by task 18784: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free.part.0+0x13f/0x1b0 slab_free_hook slab_free_freelist_hook slab_free kfree+0xcb/0x6c0 krealloc+0x56/0xb0 nbd_add_socket+0x2d3/0x880 __nbd_ioctl nbd_ioctl+0x584/0x8e0 __blkdev_driver_ioctl blkdev_ioctl+0x2a0/0x6e0 block_ioctl+0xee/0x130 vfs_ioctl __do_sys_ioctl __se_sys_ioctl+0x138/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Signed-off-by:Li Nan <linan122@huawei.com> Reviewed-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.comSigned-off-by:
-
- 20 Nov, 2023 26 commits
-
-
Jan Höppner authored
In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path. Cc: <stable@vger.kernel.org> Fixes: 4fa52aa7 ("[S390] dasd: add enhanced DASD statistics interface") Reviewed-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by:
-
Muhammad Muzammil authored
resolve typing mistake from pimary to primary Signed-off-by:
Muhammad Muzammil <m.muzzammilashraf@gmail.com> Link: https://lore.kernel.org/r/20231010043140.28416-1-m.muzzammilashraf@gmail.comSigned-off-by:
-
Chengming Zhou authored
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, null_queue_rq() would return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE for the request, which has been marked as MQ_RQ_IN_FLIGHT by blk_mq_start_request(). Then null_queue_rqs() put these requests in the rqlist, return back to the block layer core, which would try to queue them individually again, so the warning in blk_mq_start_request() triggered. Fix it by splitting the null_queue_rq() into two parts: the first is the preparation of request, the second is the handling of request. We put the blk_mq_start_request() after the preparation part, which may fail and return back to the block layer core. The throttling also belongs to the preparation part, so move it before blk_mq_start_request(). And change the return type of null_handle_cmd() to void, since it always return BLK_STS_OK now. Reported-by:
<syzbot+fcc47ba2476570cbbeb0@syzkaller.appspotmail.com> Closes: https://lore.kernel.org/all/0000000000000e6aac06098aee0c@google.com/ Fixes: d78bfa13 ("block/null_blk: add queue_rqs() support") Suggested-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Chengming Zhou <zhouchengming@bytedance.com> Link: https://lore.kernel.org/r/20231120032521.1012037-1-chengming.zhou@linux.devSigned-off-by:
-
Hannes Reinecke authored
The TLS handshake timeout work item should always be initialized to avoid a crash when cancelling the workqueue. Fixes: 675b453e ("nvmet-tcp: enable TLS handshake upcall") Suggested-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by:
Yi Zhang <yi.zhang@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
The host and subsystem NQNs are passed in the connect command payload and interpreted as nul-terminated strings. Ensure they actually are nul-terminated before using them. Fixes: a07b4970 "nvmet: add a generic NVMe target") Reported-by:
Alon Zahavi <zahavi.alon@gmail.com> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Hannes Reinecke authored
If the config option NVME_HOST_AUTH is not selected we should not accept the corresponding fabrics options. This allows userspace to detect if NVMe authentication has been enabled for the kernel. Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: f50fff73 ("nvme: implement In-Band authentication") Signed-off-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
-
Hannes Reinecke authored
nvme_configure_metadata() is issuing I/O, so we might incur an I/O error which will cause the connection to be reset. But in that case any further probing will race with reset and cause UAF errors. So return a status from nvme_configure_metadata() and abort probing if there was an I/O error. Signed-off-by:
-
Hannes Reinecke authored
We only need to evaluate the 'tls' connect option if TLS is enabled; otherwise we might be getting a link error. Fixes: 706add13 ("nvme: keyring: fix conditional compilation") Reported-by:
kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/r/202311140426.0eHrTXBr-lkp@intel.com/Signed-off-by:
-
Mark O'Donovan authored
Some error cases were not setting an auth-failure-reason-code-explanation. This means an AUTH_Failure2 message will be sent with an explanation value of 0 which is a reserved value. Signed-off-by:
Mark O'Donovan <shiftee@posteo.net> Reviewed-by:
-
Mark O'Donovan authored
Signed-off-by:
-
Damien Le Moal authored
The function blk_set_runtime_active() is called only from blk_post_runtime_resume(), so there is no need for that function to be exported. Open-code this function directly in blk_post_runtime_resume() and remove it. Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20231120070611.33951-1-dlemoal@kernel.orgSigned-off-by:
-
Li Nan authored
Memory reordering may occur in nbd_genl_connect(), causing config_refs to be set to 1 while nbd->config is still empty. Opening nbd at this time will cause null-ptr-dereference. T1 T2 nbd_open nbd_get_config_unlocked nbd_genl_connect nbd_alloc_and_init_config //memory reordered refcount_set(&nbd->config_refs, 1) // 2 nbd->config ->null point nbd->config = config // 1 Fix it by adding smp barrier to guarantee the execution sequence. Signed-off-by:Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.comSigned-off-by:
-
Li Nan authored
There are no functional changes, just to make code cleaner and prepare to fix null-ptr-dereference while accessing 'nbd->config'. Signed-off-by:
-
Li Nan authored
There are no functional changes, make the code cleaner and prepare to fix null-ptr-dereference while accessing 'nbd->config'. Signed-off-by:
-
Jens Axboe authored
Merge tag 'md-fixes-20231120' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.7 Pull MD fix from Song. * tag 'md-fixes-20231120' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix bi_status reporting in md_end_clone_io
-
Coly Li authored
In run_cache_set() after c->root returned from bch_btree_node_get(), it is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL because bch_btree_node_get() will not return NULL pointer to caller. This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason. Signed-off-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.deSigned-off-by:
-
Coly Li authored
This patch adds code comments to bch_btree_node_get() and __bch_btree_node_alloc() that NULL pointer will not be returned and it is unnecessary to check NULL pointer by the callers of these routines. Signed-off-by:
-
Coly Li authored
Commit 028ddcac ("bcache: Remove unnecessary NULL point check in node allocations") do the following change inside btree_gc_coalesce(), 31 @@ -1340,7 +1340,7 @@ static int btree_gc_coalesce( 32 memset(new_nodes, 0, sizeof(new_nodes)); 33 closure_init_stack(&cl); 34 35 - while (nodes < GC_MERGE_NODES && !IS_ERR_OR_NULL(r[nodes].b)) 36 + while (nodes < GC_MERGE_NODES && !IS_ERR(r[nodes].b)) 37 keys += r[nodes++].keys; 38 39 blocks = btree_default_blocks(b->c) * 2 / 3; At line 35 the original r[nodes].b is not always allocatored from __bch_btree_node_alloc(), and possibly initialized as NULL pointer by caller of btree_gc_coalesce(). Therefore the change at line 36 is not correct. This patch replaces the mistaken IS_ERR() by IS_ERR_OR_NULL() to avoid potential issue. Fixes: 028ddcac ("bcache: Remove unnecessary NULL point check in node allocations") Cc: <stable@vger.kernel.org> # 6.5+ Cc: Zheng Wang <zyytlz.wz@163.com> Signed-off-by:
-
Mingzhe Zou authored
We get a kernel crash about "unable to handle kernel paging request": ```dmesg [368033.032005] BUG: unable to handle kernel paging request at ffffffffad9ae4b5 [368033.032007] PGD fc3a0d067 P4D fc3a0d067 PUD fc3a0e063 PMD 8000000fc38000e1 [368033.032012] Oops: 0003 [#1] SMP PTI [368033.032015] CPU: 23 PID: 55090 Comm: bch_dirtcnt[0] Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.es8_24.x86_64 #1 [368033.032017] Hardware name: Tsinghua Tongfang THTF Chaoqiang Server/072T6D, BIOS 2.4.3 01/17/2017 [368033.032027] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 [368033.032029] Code: 8b 02 48 85 c0 74 f6 48 89 c1 eb d0 c1 e9 12 83 e0 03 83 e9 01 48 c1 e0 05 48 63 c9 48 05 c0 3d 02 00 48 03 04 cd 60 68 93 ad <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 02 [368033.032031] RSP: 0018:ffffbb48852abe00 EFLAGS: 00010082 [368033.032032] RAX: ffffffffad9ae4b5 RBX: 0000000000000246 RCX: 0000000000003bf3 [368033.032033] RDX: ffff97b0ff8e3dc0 RSI: 0000000000600000 RDI: ffffbb4884743c68 [368033.032034] RBP: 0000000000000001 R08: 0000000000000000 R09: 000007ffffffffff [368033.032035] R10: ffffbb486bb01000 R11: 0000000000000001 R12: ffffffffc068da70 [368033.032036] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [368033.032038] FS: 0000000000000000(0000) GS:ffff97b0ff8c0000(0000) knlGS:0000000000000000 [368033.032039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [368033.032040] CR2: ffffffffad9ae4b5 CR3: 0000000fc3a0a002 CR4: 00000000003626e0 [368033.032042] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [368033.032043] bcache: bch_cached_dev_attach() Caching rbd479 as bcache462 on set 8cff3c36-4a76-4242-afaa-7630206bc70b [368033.032045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [368033.032046] Call Trace: [368033.032054] _raw_spin_lock_irqsave+0x32/0x40 [368033.032061] __wake_up_common_lock+0x63/0xc0 [368033.032073] ? bch_ptr_invalid+0x10/0x10 [bcache] [368033.033502] bch_dirty_init_thread+0x14c/0x160 [bcache] [368033.033511] ? read_dirty_submit+0x60/0x60 [bcache] [368033.033516] kthread+0x112/0x130 [368033.033520] ? kthread_flush_work_fn+0x10/0x10 [368033.034505] ret_from_fork+0x35/0x40 ``` The crash occurred when call wake_up(&state->wait), and then we want to look at the value in the state. However, bch_sectors_dirty_init() is not found in the stack of any task. Since state is allocated on the stack, we guess that bch_sectors_dirty_init() has exited, causing bch_dirty_init_thread() to be unable to handle kernel paging request. In order to verify this idea, we added some printing information during wake_up(&state->wait). We find that "wake up" is printed twice, however we only expect the last thread to wake up once. ```dmesg [ 994.641004] alcache: bch_dirty_init_thread() wake up [ 994.641018] alcache: bch_dirty_init_thread() wake up [ 994.641523] alcache: bch_sectors_dirty_init() init exit ``` There is a race. If bch_sectors_dirty_init() exits after the first wake up, the second wake up will trigger this bug("unable to handle kernel paging request"). Proceed as follows: bch_sectors_dirty_init kthread_run ==============> bch_dirty_init_thread(bch_dirtcnt[0]) ... ... atomic_inc(&state.started) ... ... ... atomic_read(&state.enough) ... ... atomic_set(&state->enough, 1) kthread_run ======================================================> bch_dirty_init_thread(bch_dirtcnt[1]) ... atomic_dec_and_test(&state->started) ... atomic_inc(&state.started) ... ... ... wake_up(&state->wait) ... atomic_read(&state.enough) atomic_dec_and_test(&state->started) ... ... wait_event(state.wait, atomic_read(&state.started) == 0) ... return ... wake_up(&state->wait) We believe it is very common to wake up twice if there is no dirty, but crash is an extremely low probability event. It's hard for us to reproduce this issue. We attached and detached continuously for a week, with a total of more than one million attaches and only one crash. Putting atomic_inc(&state.started) before kthread_run() can avoid waking up twice. Fixes: b144e45f ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by:Mingzhe Zou <mingzhe.zou@easystack.cn> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mingzhe Zou authored
We had a problem with io hung because it was waiting for c->root to release the lock. crash> cache_set.root -l cache_set.list ffffa03fde4c0050 root = 0xffff802ef454c800 crash> btree -o 0xffff802ef454c800 | grep rw_semaphore [ffff802ef454c858] struct rw_semaphore lock; crash> struct rw_semaphore ffff802ef454c858 struct rw_semaphore { count = { counter = -4294967297 }, wait_list = { next = 0xffff00006786fc28, prev = 0xffff00005d0efac8 }, wait_lock = { raw_lock = { { val = { counter = 0 }, { locked = 0 '\000', pending = 0 '\000' }, { locked_pending = 0, tail = 0 } } } }, osq = { tail = { counter = 0 } }, owner = 0xffffa03fdc586603 } The "counter = -4294967297" means that lock count is -1 and a write lock is being attempted. Then, we found that there is a btree with a counter of 1 in btree_cache_freeable. crash> cache_set -l cache_set.list ffffa03fde4c0050 -o|grep btree_cache [ffffa03fde4c1140] struct list_head btree_cache; [ffffa03fde4c1150] struct list_head btree_cache_freeable; [ffffa03fde4c1160] struct list_head btree_cache_freed; [ffffa03fde4c1170] unsigned int btree_cache_used; [ffffa03fde4c1178] wait_queue_head_t btree_cache_wait; [ffffa03fde4c1190] struct task_struct *btree_cache_alloc_lock; crash> list -H ffffa03fde4c1140|wc -l 973 crash> list -H ffffa03fde4c1150|wc -l 1123 crash> cache_set.btree_cache_used -l cache_set.list ffffa03fde4c0050 btree_cache_used = 2097 crash> list -s btree -l btree.list -H ffffa03fde4c1140|grep -E -A2 "^ lock = {" > btree_cache.txt crash> list -s btree -l btree.list -H ffffa03fde4c1150|grep -E -A2 "^ lock = {" > btree_cache_freeable.txt [root@node-3 127.0.0.1-2023-08-04-16:40:28]# pwd /var/crash/127.0.0.1-2023-08-04-16:40:28 [root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache.txt|grep counter|grep -v "counter = 0" [root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache_freeable.txt|grep counter|grep -v "counter = 0" counter = 1 We found that this is a bug in bch_sectors_dirty_init() when locking c->root: (1). Thread X has locked c->root(A) write. (2). Thread Y failed to lock c->root(A), waiting for the lock(c->root A). (3). Thread X bch_btree_set_root() changes c->root from A to B. (4). Thread X releases the lock(c->root A). (5). Thread Y successfully locks c->root(A). (6). Thread Y releases the lock(c->root B). down_write locked ---(1)----------------------┐ | | | down_read waiting ---(2)----┐ | | | ┌-------------┐ ┌-------------┐ bch_btree_set_root ===(3)========>> | c->root A | | c->root B | | | └-------------┘ └-------------┘ up_write ---(4)---------------------┘ | | | | | down_read locked ---(5)-----------┘ | | | up_read ---(6)-----------------------------┘ Since c->root may change, the correct steps to lock c->root should be the same as bch_root_usage(), compare after locking. static unsigned int bch_root_usage(struct cache_set *c) { unsigned int bytes = 0; struct bkey *k; struct btree *b; struct btree_iter iter; goto lock_root; do { rw_unlock(false, b); lock_root: b = c->root; rw_lock(false, b, b->level); } while (b != c->root); for_each_key_filter(&b->keys, k, &iter, bch_ptr_bad) bytes += bkey_bytes(k); rw_unlock(false, b); return (bytes * 100) / btree_bytes(c); } Fixes: b144e45f ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: -
Mingzhe Zou authored
We found that after long run, the dirty_data of the bcache device will have errors. This error cannot be eliminated unless re-register. We also found that reattach after detach, this error can accumulate. In bch_sectors_dirty_init(), all inode <= d->id keys will be recounted again. This is wrong, we only need to count the keys of the current device. Fixes: b144e45f ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by:
-
Rand Deeb authored
In SHOW(), the variable 'n' is of type 'size_t.' While there is a conditional check to verify that 'n' is not equal to zero before executing the 'do_div' macro, concerns arise regarding potential division by zero error in 64-bit environments. The concern arises when 'n' is 64 bits in size, greater than zero, and the lower 32 bits of it are zeros. In such cases, the conditional check passes because 'n' is non-zero, but the 'do_div' macro casts 'n' to 'uint32_t,' effectively truncating it to its lower 32 bits. Consequently, the 'n' value becomes zero. To fix this potential division by zero error and ensure precise division handling, this commit replaces the 'do_div' macro with div64_u64(). div64_u64() is designed to work with 64-bit operands, guaranteeing that division is performed correctly. This change enhances the robustness of the code, ensuring that division operations yield accurate results in all scenarios, eliminating the possibility of division by zero, and improving compatibility across different 64-bit environments. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Rand Deeb <rand.sec96@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Colin Ian King authored
Variable cur_idx is being initialized with a value that is never read, it is being re-assigned later in a while-loop. Remove the redundant assignment. Cleans up clang scan build warning: drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Coly Li authored
In btree_gc_rewrite_node(), pointer 'n' is not checked after it returns from btree_gc_rewrite_node(). There is potential possibility that 'n' is a non NULL ERR_PTR(), referencing such error code is not permitted in following code. Therefore a return value checking is necessary after 'n' is back from btree_node_alloc_replacement(). Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231120052503.6122-3-colyli@suse.deSigned-off-by:
-
Coly Li authored
Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are used for dirty data writeback, their sizes are decided by backing device capacity and stripe size. Larger backing device capacity or smaller stripe size make these two arraies occupies more dynamic memory space. Currently bcache->stripe_size is directly inherited from queue->limits.io_opt of underlying storage device. For normal hard drives, its limits.io_opt is 0, and bcache sets the corresponding stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for devices do declare value for queue->limits.io_opt, small stripe_size (comparing to 1TB) becomes an issue for oversize memory allocations of bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the capacity of hard drives gets much larger in recent decade. For example a raid5 array assembled by three 20TB hardrives, the raid device capacity is 40TB with typical 512KB limits.io_opt. After the math calculation in bcache code, these two arraies will occupy 400MB dynamic memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is declared on a new 2TB hard drive, then these two arraies request 2GB and 512MB dynamic memory from kzalloc(). The result is that bcache device always fails to initialize on his system. To avoid the oversize memory allocation, bcache->stripe_size should not directly inherited by queue->limits.io_opt from the underlying device. This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size and set bcache device's stripe size against the declared limits.io_opt value from the underlying storage device, - If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will set its stripe size directly by this limits.io_opt value. - If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will set its stripe size by a value multiplying limits.io_opt and euqal or large than BCH_MIN_STRIPE_SZ. Then the minimal stripe size of a bcache device will always be >= 4MB. For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied by these two arraies will be 2.5MB in total. Such mount of memory allocated for bcache->stripe_sectors_dirty and bcache->full_dirty_stripes is reasonable for most of storage devices. Reported-by:
Andrea Tomassetti <andrea.tomassetti-opensource@devo.com> Signed-off-by:
Eric Wheeler <bcache@lists.ewheeler.net> Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.deSigned-off-by:
-
Song Liu authored
md_end_clone_io() may overwrite error status in orig_bio->bi_status with BLK_STS_OK. This could happen when orig_bio has BIO_CHAIN (split by md_submit_bio => bio_split_to_limits, for example). As a result, upper layer may miss error reported from md (or the device) and consider the failed IO was successful. Fix this by only update orig_bio->bi_status when current bio reports error and orig_bio is BLK_STS_OK. This is the same behavior as __bio_chain_endio(). Fixes: 10764815 ("md: add io accounting for raid0 and raid5") Cc: stable@vger.kernel.org # v5.14+ Reported-by:
Bhanu Victor DiCara <00bvd0+linux@gmail.com> Closes: https://lore.kernel.org/regressions/5727380.DvuYhMxLoT@bvd0/Signed-off-by:
Song Liu <song@kernel.org> Tested-by:
Xiao Ni <xni@redhat.com> Reviewed-by:
Guoqing Jiang <guoqing.jiang@linux.dev>
-
- 17 Nov, 2023 3 commits
-
-
Ming Lei authored
blkcg_deactivate_policy() can be called after blkg_destroy_all() returns, and it isn't necessary since blkg_destroy_all has covered policy deactivation. Signed-off-by:
-
Ming Lei authored
So far, all callers either holds spin lock or rcu read explicitly, and most of the caller has added WARN_ON_ONCE(!rcu_read_lock_held()) or lockdep_assert_held(&disk->queue->queue_lock). Remove WARN_ON_ONCE(!rcu_read_lock_held()) from blkg_lookup() for killing the false positive warning from blkg_conf_prep(). Reported-by:
Changhui Zhong <czhong@redhat.com> Fixes: 83462a6c ("blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()") Signed-off-by:
-
Ming Lei authored
Inside blkg_for_each_descendant_pre(), both css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock, and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held() is called. Fix the warning by adding rcu read lock. Reported-by:
-
- 13 Nov, 2023 2 commits
-
-
Christoph Hellwig authored
blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter grabbed reliably - call bio_integrity_prep() before bio merge Fixes: 900e0807 ("block: move queue enter logic into blk_mq_submit_bio()") Reported-by:
-
Linus Torvalds authored
-
- 12 Nov, 2023 4 commits
-
-
Miri Korenblit authored
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by:
Damian Tometzki <damian@riscv-rocks.de> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
-
Linus Torvalds authored
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
-
