- 28 Aug, 2017 40 commits
-
-
Michael Chan authored
Flow APIs are added in this firmware interface. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Samuel Mendoza-Jonas says: ==================== NCSI VLAN Filtering Support This series (mainly patch 2) adds VLAN filtering to the NCSI implementation. A fair amount of code already exists in the NCSI stack for VLAN filtering but none of it is actually hooked up. This goes the final mile and fixes a few bugs in the existing code found along the way (patch 1). Patch 3 adds the appropriate flag and callbacks to the ftgmac100 driver to enable filtering as it's a large consumer of NCSI (and what I've been testing on). v3: - Add comment describing change to ncsi_find_filter() - Catch NULL in clear_one_vid() from ncsi_get_filter() - Simplify state changes when kicking updated channel ==================== Signed-off-by: -
Samuel Mendoza-Jonas authored
Register the ndo_vlan_rx_{add,kill}_vid callbacks and set the NETIF_F_HW_VLAN_CTAG_FILTER if NCSI is available. This allows the VLAN core to notify the NCSI driver when changes occur so that the remote NCSI channel can be properly configured to filter on the set VLAN tags. Signed-off-by:Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
-
Samuel Mendoza-Jonas authored
Make use of the ndo_vlan_rx_{add,kill}_vid callbacks to have the NCSI stack process new VLAN tags and configure the channel VLAN filter appropriately. Several VLAN tags can be set and a "Set VLAN Filter" packet must be sent for each one, meaning the ncsi_dev_state_config_svf state must be repeated. An internal list of VLAN tags is maintained, and compared against the current channel's ncsi_channel_filter in order to keep track within the state. VLAN filters are removed in a similar manner, with the introduction of the ncsi_dev_state_config_clear_vids state. The maximum number of VLAN tag filters is determined by the "Get Capabilities" response from the channel. Signed-off-by: -
Samuel Mendoza-Jonas authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-08-27 This series contains updates to i40e and i40evf only. Sudheer updates code comments and state variable so that adminq_subtask will have accutate information whenever it gets scheduled. Mariusz stores information about FEC modes, to be used to printing link states information, so that we do not need to call admin queue when reporting link status. Adds VF support for controlling VLAN tag stripping via ethtool. Jake provides the majority of changes in this series, starting with increasing the size of the prefix buffer so that it can hold enough characters for every possible input, which prevents snprintf truncation. Fixed other string truncation errors/warnings produced by GCC 7.x. Removed an unnecessary workaround for resetting XPS. Fixed an issue where there is a mismatched affinity mask value, so initialize the value to cpu_possible_mask and invert the logic for checking incorrect CPU vs IRQ affinity so that the exceptional case is handled at the check. Removed ULTRA latency mode due to several issues found and will be looking at better solution for small packet workloads. Akeem fixes an issue where the incorrect flag was being used to set promiscuous mode for unicast, which was enabling promiscuous mode only for multicast instead of unicast. Carolyn fixes an issue where an error return value is set, but this value can be overwritten before we actually do exit the function. So remove the error code assignment and add code comments for better understanding on why we do not need to set and return the error. ==================== Signed-off-by: -
Aviad Krawczyk authored
Remove the search for index of constant buffer size Signed-off-by:
Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by:
Zhao Chen <zhaochen6@huawei.com> Signed-off-by:
-
Aviad Krawczyk authored
Fix the hw MTU limitation by setting max_mtu Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Greg Kroah-Hartman says: ==================== irda: move it to drivers/staging so we can delete it The IRDA code has long been obsolete and broken. So, to keep people from trying to use it, and to prevent people from having to maintain it, let's move it to drivers/staging/ so that we can delete it entirely from the kernel in a few releases. ==================== Signed-off-by: -
Greg Kroah-Hartman authored
The irda code will be deleted in a future kernel release, so no need to have anyone do any new work on it. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
And finally, move the irda include files into drivers/staging/irda/include/net/irda. Yes, it's a long path, but it makes it easy for us to just add a Makefile directory path addition and all of the net and drivers code "just works". Signed-off-by:
-
Greg Kroah-Hartman authored
Move the irda drivers from drivers/net/irda/ to drivers/staging/irda/drivers as they will be deleted in a future kernel release. Signed-off-by:
-
Greg Kroah-Hartman authored
It's time to get rid of IRDA. It's long been broken, and no one seems to use it anymore. So move it to staging and after a while, we can delete it from there. To start, move the network irda core from net/irda to drivers/staging/irda/net/ Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== Add RSS to DPAA 1.x Ethernet driver This patch set introduces Receive Side Scaling for the DPAA Ethernet driver. Documentation is updated with details related to the new feature and limitations that apply. Added also a small fix. v2: removed a C++ style comment v3: move struct fman to header file to avoid exporting a function v4: addressed compilation issues introduced in v3 ==================== Signed-off-by: -
Madalin Bucur authored
Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Signed-off-by:
-
Madalin Bucur authored
Set the skb hash when then FMan Keygen hash result is available. Signed-off-by:
-
Madalin Bucur authored
Allow ethtool control of the Rx flow hashing. By default RSS is enabled, this allows to turn it off by bypassing the FMan Keygen block and sending all traffic on the default Rx frame queue. Signed-off-by:
-
Madalin Bucur authored
Add a block of 128 Rx frame queues per port. The FMan hardware will send traffic on one of these queues based on the FMan port Parse Classify Distribute setup. The hash computed by the FMan Keygen block will select the Rx FQ. Signed-off-by:
-
Iordache Florinel-R70177 authored
Add support for the FMan Keygen with a hardcoded scheme to spread incoming traffic on a FQ range based on source and destination IPs and ports. Signed-off-by:
Iordache Florinel <florinel.iordache@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Signed-off-by:
-
Himanshu Jha authored
Kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Gao Feng authored
The commit 520ac30f ("net_sched: drop packets after root qdisc lock is released) made a big change of tc for performance. But there are some points which are not changed in SFQ enqueue operation. 1. Fail to find the SFQ hash slot; 2. When the queue is full; Now use qdisc_drop instead free skb directly. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: spectrum: Fix couple of dpipe ipv4 host table bugs Arkadi Sharshevsky (1): mlxsw: spectrum_dpipe: Fix host table dump Jiri Pirko (1): mlxsw: spectrum: compile-in dpipe support only if devlink is enabled ==================== Signed-off-by: -
Arkadi Sharshevsky authored
During the neighbor traversal the neighbors from different families should be ignored. Fixes: c58035a74aba ("mlxsw: spectrum_dpipe: Add support for IPv4 host table dump") Signed-off-by:Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Makes no sense to have dpipe compiled in when devlink is not enabled, because the devlink dpipe registation is noop function. So don't compile it in. This also fixes missing extern structs errors. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: a86f0309 ("mlxsw: spectrum_dpipe: Add support for IPv4 host table dump") Signed-off-by:
-
Dexuan Cui authored
Hyper-V Sockets (hv_sock) supplies a byte-stream based communication mechanism between the host and the guest. It uses VMBus ringbuffer as the transportation layer. With hv_sock, applications between the host (Windows 10, Windows Server 2016 or newer) and the guest can talk with each other using the traditional socket APIs. More info about Hyper-V Sockets is available here: "Make your own integration services": https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/make-integration-service The patch implements the necessary support in Linux guest by introducing a new vsock transport for AF_VSOCK. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: George Zhang <georgezhang@vmware.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Reilly Grant <grantr@vmware.com> Cc: Asias He <asias@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Rolf Neugebauer <rolf.neugebauer@docker.com> Cc: Marcelo Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
Jakub Kicinski authored
Add a basic test for checking whether kernel is populating the jited and xlated BPF images. It was used to confirm the behaviour change from commit d777b2dd ("bpf: don't zero out the info struct in bpf_obj_get_info_by_fd()"), which made bpf_obj_get_info_by_fd() usable for retrieving the image dumps. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Dan Carpenter authored
"err" is set to zero if bpf_map_area_alloc() fails so it means we return ERR_PTR(0) which is NULL. The caller, find_and_alloc_map(), is not expecting NULL returns and will oops. Fixes: 174a79ff ("bpf: sockmap with sk redirect support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
David Ahern authored
Twice patches trying to constify inet{6}_protocol have been reverted: 39294c3d ("Revert "ipv6: constify inet6_protocol structures"") to revert 3a3a4e30 and then 03157937 ("Revert "ipv4: make net_protocol const"") to revert aa8db499. Add a comment that the structures can not be const because the early_demux field can change based on a sysctl. Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
Willem de Bruijn authored
The xen driver initializes struct ubuf_info fields using designated initializers. I recently moved these fields inside a nested anonymous struct inside an anonymous union. I had missed this use case. This breaks compilation of xen-netback with older compilers. >From kbuild bot with gcc-4.4.7: drivers/net//xen-netback/interface.c: In function 'xenvif_init_queue': >> drivers/net//xen-netback/interface.c:554: error: unknown field 'ctx' specified in initializer >> drivers/net//xen-netback/interface.c:554: warning: missing braces around initializer drivers/net//xen-netback/interface.c:554: warning: (near initialization for '(anonymous).<anonymous>') >> drivers/net//xen-netback/interface.c:554: warning: initialization makes integer from pointer without a cast >> drivers/net//xen-netback/interface.c:555: error: unknown field 'desc' specified in initializer Add double braces around the designated initializers to match their nested position in the struct. After this, compilation succeeds again. Fixes: 4ab6c99d ("sock: MSG_ZEROCOPY notification coalescing") Reported-by:kbuild bot <lpk@intel.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
David S. Miller authored
William Tu says: ==================== gre: add collect_md mode for ERSPAN tunnel This patch series provide collect_md mode for ERSPAN tunnel. The fist patch refactors the existing gre_fb_xmit function by exacting the route cache portion into a new function called prepare_fb_xmit. The second patch introduces the collect_md mode for ERSPAN tunnel, by calling the prepare_fb_xmit function and adding ERSPAN specific logic. The final patch adds the test case using bpf_skb_{set,get}_tunnel_{key,opt}. ==================== Signed-off-by: -
William Tu authored
Extend existing tests for vxlan, gre, geneve, ipip to include ERSPAN tunnel. Signed-off-by:
William Tu <u9012063@gmail.com> Acked-by:
-
William Tu authored
Similar to gre, vxlan, geneve, ipip tunnels, allow ERSPAN tunnels to operate in 'collect metadata' mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. OVS can use it as well in the future. Signed-off-by:
-
William Tu authored
The patch refactors the gre_fb_xmit function, by creating prepare_fb_xmit function for later ERSPAN collect_md mode patch. Signed-off-by:
-
David Ahern authored
This reverts commit aa8db499. Early demux structs can not be made const. Doing so results in: [ 84.967355] BUG: unable to handle kernel paging request at ffffffff81684b10 [ 84.969272] IP: proc_configure_early_demux+0x1e/0x3d [ 84.970544] PGD 1a0a067 [ 84.970546] P4D 1a0a067 [ 84.971212] PUD 1a0b063 [ 84.971733] PMD 80000000016001e1 [ 84.972669] Oops: 0003 [#1] SMP [ 84.973065] Modules linked in: ip6table_filter ip6_tables veth vrf [ 84.973833] CPU: 0 PID: 955 Comm: sysctl Not tainted 4.13.0-rc6+ #22 [ 84.974612] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 84.975855] task: ffff88003854ce00 task.stack: ffffc900005a4000 [ 84.976580] RIP: 0010:proc_configure_early_demux+0x1e/0x3d [ 84.977253] RSP: 0018:ffffc900005a7dd0 EFLAGS: 00010246 [ 84.977891] RAX: ffffffff81684b10 RBX: 0000000000000001 RCX: 0000000000000000 [ 84.978759] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000000 [ 84.979628] RBP: ffffc900005a7dd0 R08: 0000000000000000 R09: 0000000000000000 [ 84.980501] R10: 0000000000000001 R11: 0000000000000008 R12: 0000000000000001 [ 84.981373] R13: ffffffffffffffea R14: ffffffff81a9b4c0 R15: 0000000000000002 [ 84.982249] FS: 00007feb237b7700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 84.983231] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.983941] CR2: ffffffff81684b10 CR3: 0000000038492000 CR4: 00000000000406f0 [ 84.984817] Call Trace: [ 84.985133] proc_tcp_early_demux+0x29/0x30 I think this is the second time such a patch has been reverted. Cc: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is either used during a copy operation or passed to a const argument of the function rhltable_init Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only passed to a const argument of the function inet_add_protocol. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only passed to a const argument of the function ebt_register_table. Signed-off-by:
-
David S. Miller authored
John Fastabend says: ==================== sockmap UAPI updates and fixes This series updates sockmap UAPI, adds additional test cases and provides a couple fixes. First the UAPI changes. The original API added two sockmap specific API artifacts (a) a new map_flags field with a sockmap specific update command and (b) a new sockmap specific attach field in the attach data structure. After this series instead of attaching programs with a single command now two commands are used to attach programs to maps individually. This allows us to add new programs easily in the future and avoids any specific sockmap data structure additions. The map_flags field is also removed and instead we allow socks to be added to multiple maps that may or may not have programs attached. This allows users to decide if a sock should run a SK_SKB program type on receive based on the map it is attached to. This is a nice improvement. See patches for specific details. More test cases were added to test above changes and also stress test the interface. Finally two fixes/improvements were made. First a missing rcu section was added. Second now sockmap can build without KCM being used to trigger 'y' on CONFIG_STREAM_PARSER by selecting a new BPF config option. ==================== Signed-off-by:
-
