- 30 Dec, 2022 4 commits
-
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Kuniyuki Iwashima says: =================== tcp: Fix bhash2 and TIME_WAIT regression. We forgot to add twsk to bhash2. Therefore TIME_WAIT sockets cannot prevent bind() to the same local address and port. Changes: v1: * Patch 1: * Add tw_bind2_node in inet_timewait_sock instead of moving sk_bind2_node from struct sock to struct sock_common. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
bhash2 split the bind() validation logic into wildcard and non-wildcard cases. Let's add a test to catch future regression. Before the previous patch: # ./bind_timewait TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN bind_timewait.localhost.1 ... # bind_timewait.c:87:1:Expected ret (0) == -1 (-1) # 1: Test terminated by assertion # FAIL bind_timewait.localhost.1 not ok 1 bind_timewait.localhost.1 # RUN bind_timewait.addrany.1 ... # OK bind_timewait.addrany.1 ok 2 bind_timewait.addrany.1 # FAILED: 1 / 2 tests passed. # Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0 After: # ./bind_timewait TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN bind_timewait.localhost.1 ... # OK bind_timewait.localhost.1 ok 1 bind_timewait.localhost.1 # RUN bind_timewait.addrany.1 ... # OK bind_timewait.addrany.1 ok 2 bind_timewait.addrany.1 # PASSED: 2 / 2 tests passed. # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
Jiri Slaby reported regression of bind() with a simple repro. [0] The repro creates a TIME_WAIT socket and tries to bind() a new socket with the same local address and port. Before commit 28044fc1 ("net: Add a bhash2 table hashed by port and address"), the bind() failed with -EADDRINUSE, but now it succeeds. The cited commit should have put TIME_WAIT sockets into bhash2; otherwise, inet_bhash2_conflict() misses TIME_WAIT sockets when validating bind() requests if the address is not a wildcard one. The straight option is to move sk_bind2_node from struct sock to struct sock_common to add twsk to bhash2 as implemented as RFC. [1] However, the binary layout change in the struct sock could affect performances moving hot fields on different cachelines. To avoid that, we add another TIME_WAIT list in inet_bind2_bucket and check it while validating bind(). [0]: https://lore.kernel.org/netdev/6b971a4e-c7d8-411e-1f92-fda29b5b2fb9@kernel.org/ [1]: https://lore.kernel.org/netdev/20221221151258.25748-2-kuniyu@amazon.com/ Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address") Reported-by: Jiri Slaby <jirislaby@kernel.org> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Dec, 2022 22 commits
-
-
Pedro Tammela authored
Rudi reports a compilation failure on x86_64 when CONFIG_NET_CLS or CONFIG_NET_CLS_ACT is not set but CONFIG_RETPOLINE is set. A misplaced '#endif' was causing the issue. Fixes: 7f0e8102 ("net/sched: add retpoline wrapper for tc") Tested-by: Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xuezhi Zhang authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Chunhao Lin says: ==================== r8169: fix dmar pte write access is not set error This series fixes dmar pte write access is not set error. Chunhao Lin (2): r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down() r8169: fix dmar pte write access is not set error v2: -update commit message -adjust the code according to current kernel code v3: -update title and commit message -split the patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chunhao Lin authored
When close device, if wol is enabled, rx will be enabled. When open device it will cause rx packet to be dma to the wrong memory address after pci_set_master() and system log will show blow messages. DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr ffdd4000 [fault reason 05] PTE Write access is not set In this patch, driver disable tx/rx when close device. If wol is enabled, only enable rx filter and disable rxdv_gate(if support) to let hardware only receive packet to fifo but not to dma it. Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chunhao Lin authored
There is no functional change. Moving these two functions for following patch "r8169: fix dmar pte write access is not set error". Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniil Tatianin says: ==================== net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers This series fixes a potential NULL dereference in ethtool_get_phy_stats while also attempting to refactor/split said function into multiple helpers so that it's easier to reason about what's going on. I've taken Andrew Lunn's suggestions on the previous version of this patch and added a bit of my own. Changes since v1: - Remove an extra newline in the first patch - Move WARN_ON_ONCE into the if check as it already returns the result of the comparison - Actually split ethtool_get_phy_stats instead of attempting to refactor it ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniil Tatianin authored
So that it's easier to follow and make sense of the branching and various conditions. Stats retrieval has been split into two separate functions ethtool_get_phy_stats_phydev & ethtool_get_phy_stats_ethtool. The former attempts to retrieve the stats using phydev & phy_ops, while the latter uses ethtool_ops. Actual n_stats validation & array allocation has been moved into a new ethtool_vzalloc_stats_array helper. This also fixes a potential NULL dereference of ops->get_ethtool_phy_stats where it was getting called in an else branch unconditionally without making sure it was actually present. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniil Tatianin authored
Now that we always early return if we don't have any stats we can remove these checks as they're no longer necessary. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniil Tatianin authored
It's not very useful to copy back an empty ethtool_stats struct and return 0 if we didn't actually have any stats. This also allows for further simplification of this function in the future commits. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes This series fixes a devlink bug and several XDP related bugs. The devlink bug causes a kernel crash on VF devices. The XDP driver patches fix and clean up the RX XDP path and re-enable header-data split that was disabled by mistake when adding the XDP multi-buffer support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The recent XDP multi-buffer feature has introduced regressions in the setting of HDS and jumbo thresholds. HDS was accidentally disabled in the nornmal mode without XDP. This patch restores jumbo HDS placement when not in XDP mode. In XDP multi-buffer mode, HDS should be disabled and the jumbo threshold should be set to the usable page size in the first page buffer. Fixes: 32861236 ("bnxt: change receive ring space parameters") Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The size of the first buffer is always page size, and the useable space is the page size minus the offset and the skb_shared_info size. Make sure SKB and XDP buf sizes match so that the skb_shared_info is at the same offset seen from the SKB and XDP_BUF. build_skb() should be passed PAGE_SIZE. xdp_init_buff() should be passed PAGE_SIZE as well. xdp_get_shared_info_from_buff() will automatically deduct the skb_shared_info size if the XDP buffer has frags. There is no need to keep bp->xdp_has_frags. Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF since this constant is really the MTU with ethernet header size subtracted. Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses. Fixes: 32861236 ("bnxt: change receive ring space parameters") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The XDP program can change the starting address of the RX data buffer and this information needs to be passed back from bnxt_rx_xdp() to bnxt_rx_pkt() for the XDP_PASS case so that the SKB can point correctly to the modified buffer address. Add back the data_ptr parameter to bnxt_rx_xdp() to make this work. Fixes: b231c3f3 ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
bnxt_xdp_buff_init() does not modify the data_ptr or the len parameters, so no need to pass in the addresses of these parameters. Fixes: b231c3f3 ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vikas Gupta authored
We don't register a devlink port in case of a VF so avoid setting the devlink pointer to netdev. Also, SET_NETDEV_DEVLINK_PORT has to be moved so that we determine whether the device is PF/VF first. This fixes the NULL pointer dereference of devlink_port->devlink when creating VFs: BUG: kernel NULL pointer dereference, address: 0000000000000160 PGD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 14 PID: 388 Comm: kworker/14:1 Kdump: loaded Not tainted 6.1.0-rc8 #5 Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021 Workqueue: events work_for_cpu_fn RIP: 0010:devlink_nl_port_handle_size+0xb/0x50 Code: 83 c4 10 5b 5d c3 cc cc cc cc b8 a6 ff ff ff eb de e8 c9 59 21 00 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 8b 47 20 <48> 8b a8 60 01 00 00 48 8b 45 60 48 8b 38 e8 92 90 1a 00 48 8b 7d RSP: 0018:ff4fe5394846fcd8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000794 RCX: 0000000000000000 RDX: ff1f129683a30a40 RSI: 0000000000000008 RDI: ff1f1296bb496188 RBP: 0000000000000334 R08: 0000000000000cc0 R09: 0000000000000000 R10: ff1f1296bb494298 R11: ffffffffffffffc0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1f1296bb494000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ff1f129e5fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000160 CR3: 000000131f610006 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> if_nlmsg_size+0x14a/0x220 rtmsg_ifinfo_build_skb+0x3c/0x100 rtmsg_ifinfo+0x9c/0xc0 register_netdevice+0x59d/0x670 register_netdev+0x1c/0x40 bnxt_init_one+0x674/0xa60 [bnxt_en] local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 ? rescuer_thread+0x390/0x390 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xd6/0x100 ? kthread_complete_and_exit+0x20/0x20 Fixes: ac73d4bf ("net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_port") Cc: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yoshihiro Shimoda says: ==================== net: ethernet: renesas: rswitch: Fix minor issues This patch series is based on v6.2-rc2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
To get mac address from device tree which is from each ethernet-port, fix the first argument of of_get_ethdev_address(). Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
If rswitch_init() returns non-zero and this driver is re-probed, the following error happens: renesas_eth_sw e6880000.ethernet: Unbalanced pm_runtime_enable! So, fix error path in renesas_eth_sw_probe(). Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== netdev doc de-FAQization We have outgrown the FAQ format for our process doc. I often find myself struggling to locate information in this doc, because the questions do not serve well as section headers. Reformat the document. v2: update the headers v1: https://lore.kernel.org/all/20221221184007.1170384-1-kuba@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The netdev-FAQ document has grown over the years to the point where finding information in it is somewhat challenging. The length of the questions prevents readers from locating content that's relevant at a glance. Convert to a more standard documentation format with sections and sub-sections rather than questions and answers. The content edits are limited to what's necessary to change the format, and very minor clarifications. Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Subsequent changes will reformat the doc away from FAQ. To make that more readable perform the pure section moves now. Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
At the end of rxrpc_recvmsg(), if a call is found, the call is put and then a trace line is emitted referencing that call in a couple of places - but the call may have been deallocated by the time those traces happen. Fix this by stashing the call debug_id in a variable and passing that to the tracepoint rather than the call pointer. Fixes: 84997905 ("rxrpc: Add a tracepoint to follow what recvmsg does") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Dec, 2022 5 commits
-
-
Anuradha Weeraman authored
Fix for uninitialized variable warning. Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Anuradha Weeraman <anuradha@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miaoqian Lin authored
nfc_get_device() take reference for the device, add missing nfc_put_device() to release it when not need anymore. Also fix the style warnning by use error EOPNOTSUPP instead of ENOTSUPP. Fixes: 5ce3f32b ("NFC: netlink: SE API implementation") Fixes: 29e76924 ("nfc: netlink: Add capability to reply to vendor_cmd with data") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johnny S. Lee authored
PTP hardware timestamping related objects are not linked when PTP support for MV88E6xxx (NET_DSA_MV88E6XXX_PTP) is disabled, therefore NET_DSA_MV88E6XXX should not depend on PTP_1588_CLOCK_OPTIONAL regardless of NET_DSA_MV88E6XXX_PTP. Instead, condition more strictly on how NET_DSA_MV88E6XXX_PTP's dependencies are met, making sure that it cannot be enabled when NET_DSA_MV88E6XXX=y and PTP_1588_CLOCK=m. In other words, this commit allows NET_DSA_MV88E6XXX to be built-in while PTP_1588_CLOCK is a module, as long as NET_DSA_MV88E6XXX_PTP is prevented from being enabled. Fixes: e5f31552 ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Johnny S. Lee <foss@jsl.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniil Tatianin authored
adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 3c44bba1 ("qlcnic: Disable DCB operations from SR-IOV VFs") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hawkins Jiawei authored
Syzkaller reports a memory leak as follows: ==================================== BUG: memory leak unreferenced object 0xffff88810c287f00 (size 256): comm "syz-executor105", pid 3600, jiffies 4294943292 (age 12.990s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814cf9f0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff839c9e07>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff839c9e07>] kmalloc_array include/linux/slab.h:627 [inline] [<ffffffff839c9e07>] kcalloc include/linux/slab.h:659 [inline] [<ffffffff839c9e07>] tcf_exts_init include/net/pkt_cls.h:250 [inline] [<ffffffff839c9e07>] tcindex_set_parms+0xa7/0xbe0 net/sched/cls_tcindex.c:342 [<ffffffff839caa1f>] tcindex_change+0xdf/0x120 net/sched/cls_tcindex.c:553 [<ffffffff8394db62>] tc_new_tfilter+0x4f2/0x1100 net/sched/cls_api.c:2147 [<ffffffff8389e91c>] rtnetlink_rcv_msg+0x4dc/0x5d0 net/core/rtnetlink.c:6082 [<ffffffff839eba67>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2540 [<ffffffff839eab87>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff839eab87>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff839eb046>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff8383e796>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff8383e796>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8383eb08>] ____sys_sendmsg+0x178/0x410 net/socket.c:2482 [<ffffffff83843678>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff838439c5>] __sys_sendmmsg+0x105/0x330 net/socket.c:2622 [<ffffffff83843c14>] __do_sys_sendmmsg net/socket.c:2651 [inline] [<ffffffff83843c14>] __se_sys_sendmmsg net/socket.c:2648 [inline] [<ffffffff83843c14>] __x64_sys_sendmmsg+0x24/0x30 net/socket.c:2648 [<ffffffff84605fd5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84605fd5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ==================================== Kernel uses tcindex_change() to change an existing filter properties. Yet the problem is that, during the process of changing, if `old_r` is retrieved from `p->perfect`, then kernel uses tcindex_alloc_perfect_hash() to newly allocate filter results, uses tcindex_filter_result_init() to clear the old filter result, without destroying its tcf_exts structure, which triggers the above memory leak. To be more specific, there are only two source for the `old_r`, according to the tcindex_lookup(). `old_r` is retrieved from `p->perfect`, or `old_r` is retrieved from `p->h`. * If `old_r` is retrieved from `p->perfect`, kernel uses tcindex_alloc_perfect_hash() to newly allocate the filter results. Then `r` is assigned with `cp->perfect + handle`, which is newly allocated. So condition `old_r && old_r != r` is true in this situation, and kernel uses tcindex_filter_result_init() to clear the old filter result, without destroying its tcf_exts structure * If `old_r` is retrieved from `p->h`, then `p->perfect` is NULL according to the tcindex_lookup(). Considering that `cp->h` is directly copied from `p->h` and `p->perfect` is NULL, `r` is assigned with `tcindex_lookup(cp, handle)`, whose value should be the same as `old_r`, so condition `old_r && old_r != r` is false in this situation, kernel ignores using tcindex_filter_result_init() to clear the old filter result. So only when `old_r` is retrieved from `p->perfect` does kernel use tcindex_filter_result_init() to clear the old filter result, which triggers the above memory leak. Considering that there already exists a tc_filter_wq workqueue to destroy the old tcindex_data by tcindex_partial_destroy_work() at the end of tcindex_set_parms(), this patch solves this memory leak bug by removing this old filter result clearing part and delegating it to the tc_filter_wq workqueue. Note that this patch doesn't introduce any other issues. If `old_r` is retrieved from `p->perfect`, this patch just delegates old filter result clearing part to the tc_filter_wq workqueue; If `old_r` is retrieved from `p->h`, kernel doesn't reach the old filter result clearing part, so removing this part has no effect. [Thanks to the suggestion from Jakub Kicinski, Cong Wang, Paolo Abeni and Dmitry Vyukov] Fixes: b9a24bb7 ("net_sched: properly handle failure case of tcf_exts_init()") Link: https://lore.kernel.org/all/0000000000001de5c505ebc9ec59@google.com/ Reported-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com Tested-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com Cc: Cong Wang <cong.wang@bytedance.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Dec, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 7 non-merge commits during the last 5 day(s) which contain a total of 11 files changed, 231 insertions(+), 3 deletions(-). The main changes are: 1) Fix a splat in bpf_skb_generic_pop() under CHECKSUM_PARTIAL due to misuse of skb_postpull_rcsum(), from Jakub Kicinski with test case from Martin Lau. 2) Fix BPF verifier's nullness propagation when registers are of type PTR_TO_BTF_ID, from Hao Sun. 3) Fix bpftool build for JIT disassembler under statically built libllvm, from Anton Protopopov. 4) Fix warnings reported by resolve_btfids when building vmlinux with CONFIG_SECURITY_NETWORK disabled, from Hou Tao. 5) Minor fix up for BPF selftest gitignore, from Stanislav Fomichev. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Dec, 2022 8 commits
-
-
Stanislav Fomichev authored
Shows up when cross-compiling: HOST_SCRATCH_DIR := $(OUTPUT)/host-tools vs SCRATCH_DIR := $(OUTPUT)/tools HOST_SCRATCH_DIR := $(SCRATCH_DIR) Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221222213958.2302320-1-sdf@google.com
-
Jakub Kicinski authored
Hao Lan says: ==================== net: hns3: fix some bug for hns3 There are some bugfixes for the HNS3 ethernet driver. patch#1 fix miss checking for rx packet. patch#2 fixes VF promisc mode not update when mac table full bug, and patch#3 fixes a nterrupts not initialization in VF FLR bug. ==================== Link: https://lore.kernel.org/r/20221222064343.61537-1-lanhao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jian Shen authored
Currently, it missed set HCLGE_VPORT_STATE_PROMISC_CHANGE flag for VF when vport->overflow_promisc_flags changed. So the VF won't check whether to update promisc mode in this case. So add it. Fixes: 1e6e7610 ("net: hns3: configure promisc mode for VF asynchronously") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jian Shen authored
For device supports RXD advanced layout, the driver will return directly if the hardware finish the checksum calculate. It cause missing L3E checking for ip packets. Fixes it. Fixes: 1ddc028a ("net: hns3: refactor out RX completion checksum") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jie Wang authored
Currently keep alive message between PF and VF may be lost and the VF is unalive in PF. So the VF will not do reset during PF FLR reset process. This would make the allocated interrupt resources of VF invalid and VF would't receive or respond to PF any more. So this patch adds VF interrupts re-initialization during VF FLR for VF recovery in above cases. Fixes: 862d969a ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rong Tao authored
Fix the typo of 'Unsuported' in atmbr2684.h Signed-off-by: Rong Tao <rongtao@cestc.cn> Link: https://lore.kernel.org/r/tencent_F1354BEC925C65EA357E741E91DF2044E805@qq.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sean Anderson authored
There aren't enough resources to run these ports at 10G speeds. Disable 10G for these ports, reverting to the previous speed. Fixes: 36926a7d ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G") Reported-by: Camelia Alexandra Groza <camelia.groza@nxp.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Tested-by: Camelia Groza <camelia.groza@nxp.com> Link: https://lore.kernel.org/r/20221216172937.2960054-1-sean.anderson@seco.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hao Sun authored
Verify that nullness information is not porpagated in the branches of register to register JEQ and JNE operations if one of them is PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE. Signed-off-by: Hao Sun <sunhao.th@gmail.com> Suggested-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-