- 09 Jul, 2024 3 commits
-
-
Thomas Hellström authored
To be able to handle list unlocking while traversing the LRU list, we want the iterators not only to point to the next position of the list traversal, but to insert themselves as list nodes at that point to work around the fact that the next node might otherwise disappear from the list while the iterator is pointing to it. These list nodes need to be easily distinguishable from other list nodes so that others traversing the list can skip over them. So declare a struct ttm_lru_item, with a struct list_head member and a type enum. This will slightly increase the size of a struct ttm_resource. Changes in previous series: - Update enum ttm_lru_item_type documentation. v3: - Introduce ttm_lru_first_res_or_null() (Christian König, Thomas Hellström) v5: - Update also the TTM test code (Xe CI). Cc: Christian König <christian.koenig@amd.com> Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-2-thomas.hellstrom@linux.intel.comSigned-off-by:
-
Christophe JAILLET authored
If drm_dev_register() fails, a call to drv_load() must be undone, as already done in the remove function. Fixes: b759012c ("drm/stm: Add STM32 LTDC driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20fff7f853f20a48a96db8ff186124470ec4d976.1704560028.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Sebastian Wick authored
The initial idea of the Colorspace prop was that this maps 1:1 to InfoFrames/SDP but KMS does not give user space enough information nor control over the output format to figure out which variants can be used for a given KMS commit. At the same time, properties like Broadcast RGB expect full range quantization range being produced by user space from the CRTC and drivers to convert to the range expected by the sink for the chosen output format, mode, InfoFrames, etc. This change documents the reality of the Colorspace property. The Default variant unfortunately is very much driver specific and not reflected by the EDID. The BT2020 variants are in active use by generic compositors which have expectations from the driver about the conversions it has to do when selecting certain output formats. Everything else is also marked as undefined. Coming up with valid behavior that makes it usable from user space and consistent with other KMS properties for those variants is left as an exercise for whoever wants to use them. v2: * Talk about "pixel operation properties" that user space configures * Mention that user space is responsible for checking the EDID for sink support * Make it clear that drivers can choose between RGB and YCbCr on their own Signed-off-by:
Sebastian Wick <sebastian.wick@redhat.com> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240702143017.2429975-1-sebastian.wick@redhat.com
-
- 08 Jul, 2024 2 commits
-
-
Douglas Anderson authored
Based on grepping through the source code this driver appears to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart comes straight out of the kernel doc "driver instance overview" in drm_drv.c. Suggested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240612152336.v2.3.Ifb4450979b62976fd5a98847dade2e5b377d47c8@changeid
-
Jiapeng Chong authored
Remove .owner field if calls are used which set it automatically. ./drivers/gpu/drm/stm/lvds.c:1213:3-8: No need to set .owner here. The core will do it. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9457Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240701062304.42844-1-jiapeng.chong@linux.alibaba.com
-
- 07 Jul, 2024 1 commit
-
-
Lyude Paul authored
While working on rvkms, I noticed that there's no code that actually uses the drm_pending_vblank_event that's embedded in vkms_output. So, just drop the member from the struct. Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Louis Chauvet <louis.chauvet@bootlin.com> Tested-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
-
- 05 Jul, 2024 6 commits
-
-
Krzysztof Kozlowski authored
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Alain Volmat <alain.volmat@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240330205722.93801-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by:
-
Krzysztof Kozlowski authored
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by:
-
Krzysztof Kozlowski authored
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by:
-
Krzysztof Kozlowski authored
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by:
-
Krzysztof Kozlowski authored
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by:
-
- 04 Jul, 2024 2 commits
-
-
Hamza Mahfooz authored
We want all DML changes to be reviewed by Chaitanya or Jun. So, add an entry for DML to MAINTAINERS. Suggested-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703191341.239296-1-hamza.mahfooz@amd.com
-
Steven Price authored
If a queue is already assigned to the hardware, then a newly submitted job can start straight away without waiting for the tick. However in this case the devfreq infrastructure isn't notified that the GPU is busy. By the time the tick happens the job might well have finished and no time will be accounted for the GPU being busy. Fix this by recording the GPU as busy directly in queue_run_job() in the case where there is a CSG assigned and therefore we just ring the doorbell. Fixes: de854881 ("drm/panthor: Add the scheduler logical block") Signed-off-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703155646.80928-1-steven.price@arm.com
-
- 03 Jul, 2024 15 commits
-
-
Thomas Zimmermann authored
Register constants are upper case. Fix MGAREG_Status accordingly. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191205160142.3588-3-tzimmermann@suse.de
-
Imre Deak authored
Add a helper to dump the Display Stream Compression configuration, taken into use in the i915 driver by a later patch. v2: - Rebase on the s/DRM_X16/FXP_Q4 change. - s/DSC configration/DSC configuration in the function documentation. Acked-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-3-imre.deak@intel.com
-
Imre Deak authored
Add helpers to convert between q4 fixed point and integer/fraction values. Also add the format/argument macros required to printk q4 fixed point variables. The q4 notation is based on the short variant described by https://en.wikipedia.org/wiki/Q_(number_format) where only the number of fraction bits in the fixed point value are defined, while the full size is deducted from the container type, that is the size of int for these helpers. Using the fxp_ prefix, which makes moving these helpers outside of drm to a more generic place easier, if they prove to be useful. These are needed by later patches dumping the Display Stream Compression configuration in DRM core and in the i915 driver to replace the corresponding bpp_x16 helpers defined locally in the driver. v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Wayne Lin authored
[Why] During resume, observe that we receive CSN event before we start topology probing. Handling CSN at this moment based on uncertain topology is unnecessary. [How] Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN if the topology is yet to be probed. Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Reviewed-by:
-
Wayne Lin authored
[Why] After supend/resume, with topology unchanged, observe that link_address_sent of all mstb are marked as false even the topology probing is done without any error. It is caused by wrongly also include "ret == 0" case as a probing failure case. [How] Remove inappropriate checking conditions. Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Fixes: 37dfdc55 ("drm/dp_mst: Cleanup drm_dp_send_link_address() a bit") Signed-off-by:
-
Dragan Simic authored
Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand devfreq governor by default. This causes driver initialization to fail on boot when simple_ondemand governor isn't built into the kernel statically, as a result of the missing module dependency and, consequently, the required governor module not being included in the initial ramdisk. Thus, let's mark simple_ondemand governor as a softdep for Panfrost, to have its kernel module included in the initial ramdisk. This is a rather longstanding issue that has forced distributions to build devfreq governors statically into their kernels, [1][2] or has forced users to introduce some unnecessary workarounds. [3] For future reference, not having support for the simple_ondemand governor in the initial ramdisk produces errors in the kernel log similar to these below, which were taken from a Pine64 RockPro64: panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq panfrost ff9a0000.gpu: Fatal error during GPU init panfrost: probe of ff9a0000.gpu failed with error -22 Having simple_ondemand marked as a softdep for Panfrost may not resolve this issue for all Linux distributions. In particular, it will remain unresolved for the distributions whose utilities for the initial ramdisk generation do not handle the available softdep information [4] properly yet. However, some Linux distributions already handle softdeps properly while generating their initial ramdisks, [5] and this is a prerequisite step in the right direction for the distributions that don't handle them properly yet. [1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180 [2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066 [3] https://forum.pine64.org/showthread.php?tid=15458 [4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d [5] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad Cc: Diederik de Haas <didi.debian@cknow.org> Cc: Furkan Kardame <f.kardame@manjaro.org> Cc: stable@vger.kernel.org Fixes: f3ba9122 ("drm/panfrost: Add initial panfrost driver") Signed-off-by:
Dragan Simic <dsimic@manjaro.org> Reviewed-by:
-
Thorsten Blum authored
The if condition !A || A && B can be simplified to !A || B. Fixes the following Coccinelle/coccicheck warning reported by excluded_middle.cocci: WARNING !A || A && B is equivalent to !A || B Compile-tested only. Acked-by:
Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
Ast has no special requirements for runtime power management. So replace drm_atomic_helper_commit_tail_rpm() with the regular helper drm_atomic_helper_commit_tail(). Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
The function ast_crtc_dpms() is left over from when the ast driver did not implement atomic modesetting. But DPMS is not supported by atomic modesetting and the helper is only called to enable or disable the CRTC sync pulses. Inline the function into its callers. To disable the CRTC, ast sets (AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF) in VGACRB6. Replace the constants with the correct register constants for VGACRB6. Signed-off-by:
-
Thomas Zimmermann authored
The SCREEN_DISABLE bit controls scanout from display memory. The bit affects all planes, so set it only in the CRTC's atomic enable and disable functions. A number of bugs affect this fix. First of all, ast_set_std_regs() tries to set VGASR1 except for the SD bit. But the read bitmask is invert, so it preserves anything except the SD bit. Fix this by re-inverting the read mask. The second issue is that primary-plane and CRTC helpers modify the SD bit. The bit controls scanout for all planes, primary and HW cursor, so set it only in the CRTC code. Further add a constant to represent the SD bit in VGASR1. Keep the plane's atomic_disable around to make the DRM framework happy. v2: - fix typos in commit message Signed-off-by:
-
Thomas Zimmermann authored
The DPMS code, called from the CRTC's atomic_enable, rewrites the gamma LUT. This is already done by the CRTC's atomic_flush. Remove the duplication. v2: - fix a typo in commit message Signed-off-by:
-
Thomas Zimmermann authored
Several color registers are programmed in the DPMS code of the CRTC's atomic_enable helper and the primary plane's atomic_update. It requires the color format and the display mode. Both code paths handle different cases: the DPMS's code will not be executed if the color format changes without a full mode switch. The plane's code only runs if the color format changes, but ignores display-mode changes. The color format is a property of the primary plane, so consolidate all color-format code in the plane's atomic_update. Remove it from the DPMS helper. v2: - clarify commit message (Jocelyn) Signed-off-by:
-
Thomas Zimmermann authored
Do all mode setting in ast_crtc_helper_mode_set_nofb(), which always runs after disabling the CRTC and before programming the planes. Removes implicit synchronization between the CRTC's atomic disable, enable and the vertical retrace. Display-mode updates require HW cursors to be disabled. The HW cursor only picks up changes at vertical retrace periods. So the CRTC's atomic_disable helper waited for the retrace to delay any following mode-setting operations, which then happened in atomic_enable. See [1] for a description of the problem. With the CRTC helper callback mode_set_nofb, we can now synchronize and reprogram in the same place. As it always runs before the plane update, the plane code can be reordered with the CRTC's later atomic_enable et al. Signed-off-by:
-
Thomas Zimmermann authored
The CRTC's atomic_flush function contains code to program the display mode to the AST DP chip. Move the code to the encoder's atomic_mode_set callback. The DRM atomic-modesetting code invoke this callback as part of the atomic commit. v2: - fix typos in commit message Signed-off-by:
-
Thomas Zimmermann authored
The CRTC helpers contain code to enable and disable DisplayPort connectors. Implement this functionality in the respective connector's atomic_enable/atomic_disable callbacks. DRM's atomic-modesetting helpers will call the functions as part of the atomic commit. Signed-off-by:
-
- 01 Jul, 2024 1 commit
-
-
Dave Stevenson authored
Adds test for the cmdline parser, connector property, and drm_analog_tv_mode to ensure the behaviour of the new value is correct. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
- 30 Jun, 2024 1 commit
-
-
Dragan Simic authored
Lima DRM driver uses devfreq to perform DVFS, while using simple_ondemand devfreq governor by default. This causes driver initialization to fail on boot when simple_ondemand governor isn't built into the kernel statically, as a result of the missing module dependency and, consequently, the required governor module not being included in the initial ramdisk. Thus, let's mark simple_ondemand governor as a softdep for Lima, to have its kernel module included in the initial ramdisk. This is a rather longstanding issue that has forced distributions to build devfreq governors statically into their kernels, [1][2] or may have forced some users to introduce unnecessary workarounds. Having simple_ondemand marked as a softdep for Lima may not resolve this issue for all Linux distributions. In particular, it will remain unresolved for the distributions whose utilities for the initial ramdisk generation do not handle the available softdep information [3] properly yet. However, some Linux distributions already handle softdeps properly while generating their initial ramdisks, [4] and this is a prerequisite step in the right direction for the distributions that don't handle them properly yet. [1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux-pinephone/-/blob/6.7-megi/config?ref_type=heads#L5749 [2] https://gitlab.com/postmarketOS/pmaports/-/blob/7f64e287e7732c9eaa029653e73ca3d4ba1c8598/main/linux-postmarketos-allwinner/config-postmarketos-allwinner.aarch64#L4654 [3] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d [4] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad Cc: Philip Muller <philm@manjaro.org> Cc: Oliver Smith <ollieparanoid@postmarketos.org> Cc: Daniel Smith <danct12@disroot.org> Cc: stable@vger.kernel.org Fixes: 19969707 ("drm/lima: Add optional devfreq and cooling device support") Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/fdaf2e41bb6a0c5118ff9cc21f4f62583208d885.1718655070.git.dsimic@manjaro.org
-
- 28 Jun, 2024 9 commits
-
-
Raphael Gallais-Pou authored
DSISRC __________ __\_ | \ pll4_p_ck ->| 1 |____dsi_k ck_dsi_phy ->| 0 | |____/ A DSI clock is missing in the clock framework. Looking at the clk_summary, it appears that 'ck_dsi_phy' is not implemented. Since the DSI kernel clock is based on the internal DSI pll. The common clock driver can not directly expose this 'ck_dsi_phy' clock because it does not contain any common registers with the DSI. Thus it needs to be done directly within the DSI phy driver. Signed-off-by:
Yannick Fertre <yannick.fertre@foss.st.com> Tested-by:
-
Yannick Fertre authored
Update control of clocks and supply thanks to the PM runtime mechanism to avoid kernel crash during a system suspend. Signed-off-by:
-
Raphael Gallais-Pou authored
Use RUNTIME_PM_OPS() instead of the old SET_SYSTEM_SLEEP_PM_OPS(). This means we don't need __maybe_unused on the functions. Signed-off-by:
-
Raphael Gallais-Pou authored
The Low-Voltage Differential Signaling (LVDS) Display Interface Transmitter handles the LVDS protocol: it maps the pixels received from the upstream Pixel-DMA LCD-TFT Display Controller (LTDC) onto the LVDS PHY. It is composed of three sub blocks: * LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input pixels onto the data lanes of the PHY * LVDS PHY: parallelize the data and drives the LVDS data lanes * LVDS wrapper: handles top-level settings The LVDS controller driver supports the following high-level features: * FDP-Link-I and OpenLDI (v0.95) protocols * Single-Link or Dual-Link operation * Single-Display or Double-Display (with the same content duplicated on both) * Flexible Bit-Mapping, including JEIDA and VESA * RGB888 or RGB666 output * Synchronous design, with one input pixel per clock cycle Signed-off-by:
-
Raphael Gallais-Pou authored
Add "st,stm32mp25-lvds" compatible. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Acked-by:
-
Zhaoxiong Lv authored
This driver does not have the function to adjust the orientation, so this function is added. Signed-off-by:
Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240624141926.5250-6-lvzhaoxiong@huaqin.corp-partner.google.comSigned-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240624141926.5250-6-lvzhaoxiong@huaqin.corp-partner.google.com
-
Zhaoxiong Lv authored
The K&d kd101ne3-40ti is a 10.1" WXGA TFT-LCD panel, use jd9365da controller,which fits in nicely with the existing panel-jadard-jd9365da-h3 driver.Hence,we add a new compatible with panel specific config. Although they have the same control IC, the two panels are different, and the timing will be slightly different, so we added some variables in struct jadard_panel_desc to control the timing. Signed-off-by:
-
Zhaoxiong Lv authored
Remove conditional code and always use mipi_dsi_dcs_*multi() wrappers to simplify driver's init/enable/exit code. Signed-off-by:
-
Zhaoxiong Lv authored
The kingdisplay-kd101ne3 is a 10.1" WXGA TFT-LCD panel with jadard-jd9365da controller. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
