This commit adds the DT binding documentation for the Marvell CP110
system controller, which is part of the CP110 HW block, itself used in
the Marvell Armada 7K and 8K SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Rob Herring <rob@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The Armada AP806 system controller, amongst other things, provides a
number of clocks for the platform: the CPU cluster clocks, whose
frequencies are found by reading the Sample At Reset register, one
fixed clock, and another clock derived from the fixed clock, which is
the one used by most peripherals in AP806.

The AP806 is one of the two core HW blocks used in the Marvell 7K/8K
SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[sboyd@codeaurora.org: Silence some checkpatch noise]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-hi3519:
  clk: hisilicon: add CRG driver for hi3519 soc
  clk: hisilicon: export some hisilicon APIs to modules
  reset: hisilicon: add reset controller driver for hisilicon SOCs

The CRG(Clock and Reset Generator) block provides clock
and reset signals for other modules in hi3519 soc.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Change some arguments to constant type.
Export some hisilicon APIs to modules.
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

In most of hisilicon SOCs, reset controller and clock provider are
combined together as a block named CRG (Clock and Reset Generator).
This patch mainly implements the reset function.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

When sizeof is applied to a pointer typed expression, it gives
the size of the pointer. So, here do not use sizeof on pointer
type. Also, silent checkpatch.pl by using kmalloc_array over
kmalloc.

Note that this has no effect on runtime because 'parent_names'
is a pointer to a pointer.

Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This patch adds the CLK_SET_RATE_PARENT flag for the crypto core and
ahb blocks.  Without this flag, clk_set_rate can fail for certain
frequency requests.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Fixes: 3966fab8 ("clk: qcom: Add MSM8916 Global Clock Controller support")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'imx-clk-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next

Pull i.MX clk updates from Shawn Guo:

 - Update clk-pllv3 driver to get it return correct frequency for
   Ethernet PLL on i.MX7D.
 - Correct ahb clock mux settings for i.MX7D per latest hardware
   document.

* tag 'imx-clk-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx7d: fix ahb clock mux 1
  clk: imx: return correct frequency for Ethernet PLL

Failure to initialize this flag to 0 by default can result in
stack junk filling the clk_init_data structure and weird things
happen. Joachim noticed that the critical clk feature started
triggering for these clks causing boot failures, when it really
shouldn't have happened:

BUG: scheduling while atomic: swapper/0/0x00000002
CPU: 0 PID: 0 Comm: swapper Not tainted
4.6.0-rc6-next-20160505-00001-g5c8320450d1c #826
Hardware name: NXP LPC18xx/43xx (Device Tree)
[<2800be81>] (unwind_backtrace) from [<2800b22f>] (show_stack+0xb/0xc)
[<2800b22f>] (show_stack) from [<2801ea21>] (__schedule_bug+0x2d/0x44)
[<2801ea21>] (__schedule_bug) from [<281dc937>] (__schedule+0x3b/0x268)
[<281dc937>] (__schedule) from [<281dcbbb>] (schedule+0x57/0x64)
[<281dcbbb>] (schedule) from [<281de8ef>] (schedule_timeout+0xfb/0x120)
[<281de8ef>] (schedule_timeout) from [<28030fcd>] (msleep+0xf/0x12)
[<28030fcd>] (msleep) from [<28165a6d>] (clk_creg_32k_prepare+0x1f/0x24)
[<28165a6d>] (clk_creg_32k_prepare) from [<281620d5>]
(clk_core_prepare+0x1d/0x36)
[<281620d5>] (clk_core_prepare) from [<2816340b>] (clk_register+0x22f/0x318)
[<2816340b>] (clk_register) from [<282b06c9>] (lpc18xx_creg_clk_init+0x55/0x84)
[<282b06c9>] (lpc18xx_creg_clk_init) from [<282b0149>] (of_clk_init+0xc1/0x12c)
[<282b0149>] (of_clk_init) from [<282a665d>] (time_init+0x15/0x20)
[<282a665d>] (time_init) from [<282a457d>] (start_kernel+0x169/0x274)
[<282a457d>] (start_kernel) from [<28008025>] (0x28008025)
bad: scheduling from the idle thread!
CPU: 0 PID: 0 Comm: swapper Tainted: G W
4.6.0-rc6-next-20160505-00001-g5c8320450d1c #826

Fix this by initializing the flags member to 0.
Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The ARC SDP I2S clock can be programmed using a
specific PLL.

This patch has the goal of adding a clock driver
that programs this PLL.

At this moment the rate values are hardcoded in
a table but in the future it would be ideal to
use a function which determines the PLL values
given the desired rate.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The clock parent of the AHB root clock when using mux option 1
is the SYS PLL 270MHz clock. This is specified in  Table 5-11
Clock Root Table of the i.MX 7Dual Applications Processor
Reference Manual.

While it could be a documentation error, the 270MHz parent is
also mentioned in the boot ROM configuration in Table 6-28: The
clock is by default at 135MHz due to a POST_PODF value of 1
(=> divider of 2).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Unlike devm_clk_register(), devm_clk_hw_register() returns integer.
So, the statement "Clocks returned from this function ..." sounds
odd.  Adjust the comment for this new API.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'clk-renesas-for-v4.7-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - Support for CSI2 and VIN module clocks on R-Car H3,
  - Renesas CPG/MSTP and CPG/MSSR Clock Domain fixes.

* tag 'clk-renesas-for-v4.7-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: cpg-mssr: Use always-on governor for Clock Domain
  clk: renesas: cpg-mssr: Postpone call to pm_genpd_init()
  clk: renesas: mstp: Use always-on governor for Clock Domain
  clk: renesas: mstp: Postpone call to pm_genpd_init()
  clk: renesas: r8a7795: Add VIN clocks
  clk: renesas: r8a7795: Add CSI2 clocks

Merge tag 'sunxi-clocks-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Pull Allwinner clock driver updates from Maxime Ripard:

As usual, a bunch of clocks patches for 4.7, mostly fixes and cleanups, and
display-related clocks.

* tag 'sunxi-clocks-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi: Let divs clocks read the base factor clock name from devicetree
  clk: sunxi: Add TCON channel1 clock
  clk: sunxi: Add PLL3 clock
  dt-bindings: clk: sun5i: add DRAM gates compatible
  clk: sunxi: Use resource_size
  clk: sunxi: Add sun6i/8i display support
  clk: sunxi: mod1 clock should modify it's parent

Merge tag 'tegra-for-4.7-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

Pull tegra clk driver changes from Thierry Reding:

This set of changes contains a bunch of cleanups and minor fixes along
with some new clocks, mainly on Tegra210, in preparation for supporting
DisplayPort and HDMI 2.0.

* tag 'tegra-for-4.7-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: dfll: Reformat CVB frequency table
  clk: tegra: dfll: Properly clean up on failure and removal
  clk: tegra: dfll: Make code more comprehensible
  clk: tegra: dfll: Reference CVB table instead of copying data
  clk: tegra: dfll: Update kerneldoc
  clk: tegra: Fix PLL_U post divider and initial rate on Tegra30
  clk: tegra: Initialize PLL_C to sane rate on Tegra30
  clk: tegra: Fix pllre Tegra210 and add pll_re_out1
  clk: tegra: Add sor_safe clock
  clk: tegra: dpaux and dpaux1 are fixed factor clocks
  clk: tegra: Add dpaux1 clock
  clk: tegra: Use correct parent for dpaux clock
  clk: tegra: Add fixed factor peripheral clock type
  clk: tegra: Special-case mipi-cal parent on Tegra114
  clk: tegra: Remove trailing blank line
  clk: tegra: Constify peripheral clock registers
  clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs

Merge tag 'v4.7-rockchip-clk3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk updates from Heiko Stuebner:

A spelling fix and a bunch of rk3399 clock fixes.

* tag 'v4.7-rockchip-clk3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: fix the rk3399 cifout clock
  clk: rockchip: drop unnecessary CLK_IGNORE_UNUSED flags from rk3399
  clk: rockchip: add some frequencies on the rk3399 PLL table
  clk: rockchip: assign more necessary rk3399 clock ids
  clk: rockchip: export some necessary rk3399 clock ids
  clk: rockchip: rename rga clock-id on rk3399
  clk: rockchip: add general gpu soft-reset on rk3399
  clk: rockchip: fix the gate bit for i2c4 and i2c8 on rk3399
  clk: rockchip: fix of spelling mistake on unsuccessful in pll clock type

Increase the readability of the CVB frequency table by reformatting it a
little.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Upon failure to probe the DFLL, the OPP table will not be cleaned up
properly. Fix this and while at it make sure the OPP table will also be
cleared upon driver removal.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Rename some variables and structure fields to make the code more
comprehensible. Also change the prototype of internal functions to be
more in line with the OPP core functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Instead of copying parts of the CVB table into a separate structure,
keep track of the selected CVB table and directly reference data from
it.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The kerneldoc for struct tegra_dfll_soc_data is stale. Update it to
match the current structure definition.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The post divider value in the frequency table is wrong as it would lead
to the PLL producing an output rate of 960 MHz instead of the desired
480 MHz. This wasn't a problem as nothing used the table to actually
initialize the PLL rate, but the bootloader configuration was used
unaltered.

If the bootloader does not set up the PLL it will fail to come when used
under Linux. To fix this don't rely on the bootloader, but set the
correct rate in the clock driver.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

If the bootloader does not touch PLL_C it will stay in its reset state,
failing to lock when enabled. This leads to consumers of this clock to
fail probing. Fix this by always programming the PLL with a sane rate,
which allows it to lock, at startup.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Use a new Tegra210 version of the pll_register_pllre function to
allow setting the proper settings for the m and n div fields.

Additionally define PLL_RE_OUT1 on Tegra210.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
[treding@nvidia.com: define PLLRE_OUT1 register offset]
Signed-off-by: Thierry Reding <treding@nvidia.com>

The sor_safe clock is a fixed factor (1:17) clock derived from pll_p. It
has a gate bit in the peripheral clock registers. While the SOR is being
powered up, sor_safe can be used as the source until the SOR brick can
generate its own clock.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The dpaux (on Tegra124 and Tegra210) and dpaux1 (on Tegra210) are fixed
factor clocks (1:17) and derived from pll_p_out0 (pll_p). They also have
a gate bit in the peripheral clock registers.
Signed-off-by: Thierry Reding <treding@nvidia.com>

This clock is of the same type as dpaux and is added to feed into the
second DPAUX block used in conjunction with SOR1.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The dpaux clock is derived from pll_p_out0 (pll_p), not clk_m.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Some of the peripheral clocks on Tegra are derived from one of the top-
level PLLs with a fixed factor. Support these clocks by implementing the
->enable() and ->disable() callbacks using the peripheral clock register
banks and the ->recalc_rate() by dividing the parent rate by the fixed
factor.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Starting with Tegra124, the mipi-cal clock uses the 72 MHz clock as its
source. On Tegra114 this clock's parent was clk_m, so it is the one-off
chip.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Trailing blank lines are undesirable (several tools, such as git,
complain about them), so remove it.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The peripheral clock registers are defined in static tables. These
tables never need to be modified at runtime, so they can reside in
read-only memory.
Signed-off-by: Thierry Reding <treding@nvidia.com>

On Tegra210, hardware control of the SATA and XUSB pad PLLs must be
done during the UPHY enable sequence rather than the PLLE enable
sequence.  Export functions to do this so that hardware control can
be enabled from the XUSB padctl driver.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

As a pure Clock Domain does not have the concept of powering the domain
itself, the CPG/MSTP driver does not provide power_off() and power_on()
callbacks.
However, the genpd core may still perform a dummy power down, causing
/sys/kernel/debug/pm_genpd/pm_genpd_summary to report the domain's
status being "off-0".

Use the always-on governor to make sure the domain is never powered
down, and always shows up as "on" in pm_genpd_summary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

All local setup of the generic_pm_domain structure should have been
completed before calling pm_genpd_init().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

As a pure Clock Domain does not have the concept of powering the domain
itself, the CPG/MSTP driver does not provide power_off() and power_on()
callbacks.
However, the genpd core may still perform a dummy power down, causing
/sys/kernel/debug/pm_genpd/pm_genpd_summary to report the domain's
status being "off-0".

Use the always-on governor to make sure the domain is never powered
down, and always shows up as "on" in pm_genpd_summary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

All local setup of the generic_pm_domain structure should have been
completed before calling pm_genpd_init().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

The i.MX 7 designs Ethernet PLL provides a 1000MHz reference clock.
Store the reference clock in the clk_pllv3 structure according to
the PLL type.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>