Error code wasn't being propagated correctly, change it to match
fsck_err()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes should_restart_for_topology_repair() - previously it was
returning false if the btree io path had already seleceted topology
repair to run, even if it hadn't run yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

UBSAN was complaining about a shift by 64 in set_inc_field().

This only happened when the value being shifted was 0, so in theory
should be harmless - a shift by 64 (or register width) should logically
give a result of 0, but CPUs will in practice leave the input unchanged
when the number of bits to shift by wraps - and since our input here is
0, the output is still what we want.

But, it's still undefined behaviour and we need our UBSAN output to be
clean, so it needs to be fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

 - add a to_text() method for bkey_format

 - convert bch2_bkey_format_validate() to modern error message style,
   where we pass a printbuf for the error string instead of returning a
   static string
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a new bitset btree for inodes pending deletion; this means we no
longer have to scan the full inodes btree after an unclean shutdown.

Specifically, this adds:
 - a trigger to update the deleted_inodes btree based on changes to the
   inodes btree
 - a new recovery pass
 - and check_inodes is now only a fsck pass.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

A number of smallish fixes for overlapping extent repair, and (part of)
a new unit test. This fixes all the issues turned up by bhzhu203, in his
filesystem image from running mongodb + snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We want to ensure that fsck actually fixed all the errors it found - the
second fsck run should be clean.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Move some code out of bcachefs.h, which is too much of an everything
header.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

clang had a few more warnings about enum conversion, and also didn't
like the opts.c initializer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Prep work for the new deleted inodes btree
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This refactoring centralizes defining per-btree properties.

bch2_key_types_allowed was also about to overflow a u32, so expand that
to a u64.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Factor out a new helper, to be used when fsck has to repair overlapping
extents.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We were attempting to initialize inode hash info when no inodes were
found.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

New helper for bitset btrees.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bit of reorg
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Delete the old, now reimplemented overlapping extent check/repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This adds bch2_run_explicit_recovery_pass(), for rewinding recovery and
explicitly running a specific recovery pass - this is a more general
replacement for how we were running topology repair before.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This introduces bch2_run_explicit_recovery_pass() and uses it for when
fsck detects that we need to re-run dead snaphots cleanup, and makes
dead snapshot cleanup more like a normal recovery pass.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The write buffer mechanism journals keys twice in certain
situations. A key is always journaled on write buffer insertion, and
is potentially journaled again if a write buffer flush falls into
either of the slow btree insert paths. This has shown to cause
journal recovery ordering problems in the event of an untimely
crash.

For example, consider if a key is inserted into index 0 of a write
buffer, the active write buffer switches to index 1, the key is
deleted in index 1, and then index 0 is flushed. If the original key
is rejournaled in the btree update from the index 0 flush, the (now
deleted) key is journaled in a seq buffer ahead of the latest
version of key (which was journaled when the key was deleted in
index 1). If the fs crashes while this is still observable in the
log, recovery sees the key from the btree update after the delete
key from the write buffer insert, which is the incorrect order. This
problem is occasionally reproduced by generic/388 and generally
manifests as one or more backpointer entry inconsistencies.

To avoid this problem, never rejournal write buffered key updates to
the associated btree. Instead, use prejournaled key updates to pass
the journal seq of the write buffer insert down to the btree insert,
which updates the btree leaf pin to reflect the seq of the key.

Note that tracking the seq is required instead of just using
NOJOURNAL here because otherwise we lose protection of the write
buffer pin when the buffer is flushed, which means the key can fall
off the tail of the on-disk journal before the btree leaf is flushed
and lead to similar recovery inconsistencies.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Introduce support for prejournaled key updates. This allows a
transaction to commit an update for a key that already exists (and
is pinned) in the journal. This is required for btree write buffer
updates as the current scheme of journaling both on write buffer
insertion and write buffer (slow path) flush is unsafe in certain
crash recovery scenarios.

Create a small trans update wrapper to pass along the seq where the
key resides into the btree_insert_entry. From there, trans commit
passes the seq into the btree insert path where it is used to manage
the journal pin for the associated btree leaf.

Note that this patch only introduces the underlying mechanism and
otherwise includes no functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

There is only one other caller so eliminate some boilerplate.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is in preparation to support prejournaled keys. We want the
ability to optionally pass a seq stored in the btree update rather
than the seq of the committing transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Brian has been playing with bcachefs for several months now and has
offerred to commit time to patch review.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We commonly use no_data_io mode when debugging filesystem metadata
dumps, where data checksum/compression errors are expected and
unimportant - this patch suppresses these.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a use-after-free.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We currently don't track whether snapshot cleanup still needs to finish
(aside from running a full fsck), so it shouldn't be a fsck error yet -
fsck -n after fsck has succesfully completed shouldn't error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Delete a redundant bch2_snapshot_is_ancestor() check, and convert some
assertions to debug assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Make the overlapping extent check/repair code more self contained.

This is prep work for hopefully reducing key_visible_in_snapshot() usage
here as well, and also includes a nice performance optimization to not
check ref_visible2() unless the extents potentially overlap.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This changes the main part of check_extents(), that checks the extent
against the corresponding inode, to not use key_visible_in_snapshot().

key_visible_in_snapshot() has to iterate over the list of ancestor
overwrites repeatedly calling bch2_snapshot_is_ancestor(), so this is a
significant performance improvement.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More prep work for reducing key_visible_in_snapshot() usage - this
rearranges how KEY_TYPE_whitout keys are handled, so that they can be
marked off in inode_warker->inode->seen_this_pos.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We only want to synthesize an inode for the current snapshot ID for non
whiteouts - this refactoring lets us call walk_inode() earlier and clean
up some control flow.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>