- 08 Jun, 2016 40 commits
-
-
David Binder authored
Changes return statements in visornic_rx() to use literals instead of a variable. Also changes function description to reflect the correct return type. Signed-off-by: David Binder <david.binder@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erik Arfvidson authored
This patch changes the vague -1 return values to -EPERM. This operation is not supported is a good alternative to -1 because the return is basically telling the caller that the processor doesn't support vmcall operations. Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erik Arfvidson authored
This patch changes the vague -1 return value to -EINVAL Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erik Arfvidson authored
This patch changes the vague -1 return values to -EFAULT since it would be the most appropriate, given that this error would only occur in an unexpected bad offset field. Resulting in a bad address. Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erik Arfvidson authored
This patch changes the vague -1 return value to -EBUSY Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erik Arfvidson authored
This patch changes the vague -1 return value to -EINVAL Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Sell authored
This patch fixes a few checkpatch warnings in visorhba: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Binder authored
Removes an extraneous error check in devdata_initialize(), and updates the function comment accordingly. Signed-off-by: David Binder <david.binder@unisys.com> Reviewed-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Binder authored
Changes the conditional logic to check for an error code instead of a success code. Signed-off-by: David Binder <david.binder@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Binder authored
Returns 0 instead of variable rc in visorhba_init(). Signed-off-by: David Binder <david.binder@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Binder authored
Adjusts goto labels to prevent attempts to free unallocated resources. Signed-off-by: David Binder <david.binder@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Binder authored
Changes the conditional logic by looking for the absence of work to do, instead of the opposite. Signed-off-by: David Binder <david.binder@unisys.com> Reviewed-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Sell authored
The prior patch which simplified the visorhba debugfs interface made it so visorhbas_open[] and VISORHBA_OPEN_MAX were no longer needed, so they have now been deleted. Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Sell authored
debugfs info for each visorhba device is now presented by a file named of the following form within the debugfs tree: visorhba/vbus<x>:dev<y>/info where <x> is the vbus number, and <y> is the relative device number. Also, the debugfs presentation function was converted to use the seq_file interface, so that it could access the device context without resorting to a global array. This also simplified the function. Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Sell authored
The handling of CMD_NOTIFYGUEST_TYPE messages from the IO partition appears to be only partially implemented, but fortunately it is never used in our current environment. This patch deletes the unused code. Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Sell authored
This patch is necessary to enable ANY task mgmt command to complete successfully via visorhba. When issuing a task mgmt command (CMD_SCSITASKMGMT_TYPE) to the IO partition (back-end), forward_taskmgmt_command() includes pointers within the command area that will be used to wake up the issuing process and provide the result when the command completes: cmdrsp->scsitaskmgmt.notify_handle = (u64)¬ifyevent; cmdrsp->scsitaskmgmt.notifyresult_handle = (u64)¬ifyresult; 'notify_handle' is a pointer to a 'wait_queue_head_t' variable, and 'notifyresult' is a pointer to an int. Both of these are just local stack variables in the issuing process. The way it's supposed to happen is that when the IO partition completes the command, in our completion handling we get copies of those pointers back from the IO partition, where we stash the result of the command at '*notifyresult' (which should not be 0xffff, because that is the initial value that the caller is looking to see a change in), and wake up the wait queue at '*notify_handle'. There are several places we do that dance, but prior to this patch, we always do it WRONG, like: cmdrsp->scsitaskmgmt.notifyresult_handle = TASK_MGMT_FAILED; wake_up_all((wait_queue_head_t *)cmdrsp->scsitaskmgmt.notify_handle); The wake_up_all() part is correct (albeit with the help of the sloppy pointer casting, but that's irrelevant to the bug), but the assignment of 'notifyresult_handle' is WRONG, and SHOULD read: *(int *)(cmdrsp->scsitaskmgmt.notifyresult_handle) = TASK_MGMT_FAILED; Without this change, the caller is NEVER going to notice a change in his local value of 'notifyresult' when he does the: if (!wait_event_timeout(notifyevent, notifyresult != 0xffff, msecs_to_jiffies(45000))) and hence will be timing out EVERY taskmgmt command. This patch also eliminates the need for sloppy casting of pointers back-and-forth between u64 values, with the help of idr_alloc() to provide handles for us. It is the generated int handles we pass to the IO partition to denote our completion context, and these are validated and converted back to the required pointers when the task mgmt commands are returned back to us by the IO partition. == Testing == You must enable dynamic debugging in visorhba (build kernel with 'CONFIG_DYNAMIC_DEBUG=y', provide kernel parameter 'visorhba.dyndbg=+p') to see kernel messages involved with visorhba scsi task mgmt commands, which were added in this patch in the form of a few dev_dbg() / pr_debug() messages. In order to inject faults necessary to get visorhba to actully issue scsi task mgmt commands, you will need to compile a kernel with CONFIG_FAIL_IO_TIMEOUT and friends, in the "Kernel hacking" section: * Enable "Fault-injection framework" * Enable "Fault-injection capability for disk IO" * Enable "Fault-injection capability for faking disk interrupts" * Enable "Debugfs entries for fault-injection capabilities" When running a kernel with those options, you can manually inject a fault that will force a scsi task mgmt command to be issued like this: # mount -t debugfs nodev /sys/kernel/debug # cd /sys/kernel/debug/fail_io_timeout # cat interval 1 # cat probability 0 # cat times 1 # echo 100 >probability # cd /sys/block/sda # l | grep fail -rw-r--r-- 1 root root 4096 May 5 10:53 io-timeout-fail -rw-r--r-- 1 root root 4096 May 5 10:54 make-it-fail # echo 1 >io-timeout-fail # echo 1 >make-it-fail To test this patch, after performing the above steps, I did something to force a block device i/o, then shortly afterwards examined the kernel log. There I found evidence that visorhba had successfully issued a task mgmt command, and that it completed successfully: [ 333.352612] FAULT_INJECTION: forcing a failure. name fail_io_timeout, interval 1, probability 100, space 0, times 1 [ 333.352617] CPU: 0 PID: 295 Comm: vhba_incoming Tainted: G C 4.6.0-rc3-ARCH+ #2 [ 333.352619] Hardware name: Dell Inc. PowerEdge T110/ , BIOS 1.23 12/15/2009 [ 333.352620] 0000000000000000 ffff88001d1a7dd0 ffffffff8125beeb ffffffff818507c0 [ 333.352623] 0000000000000064 ffff88001d1a7df0 ffffffff8128047a ffff8800113462b0 [ 333.352625] ffff88000e523000 ffff88001d1a7e00 ffffffff81241c79 ffff88001d1a7e18 [ 333.352627] Call Trace: [ 333.352634] [<ffffffff8125beeb>] dump_stack+0x4d/0x72 [ 333.352637] [<ffffffff8128047a>] should_fail+0x11a/0x120 [ 333.352641] [<ffffffff81241c79>] blk_should_fake_timeout+0x29/0x30 [ 333.352643] [<ffffffff81241c36>] blk_complete_request+0x16/0x30 [ 333.352654] [<ffffffffa0118b36>] scsi_done+0x26/0x80 [scsi_mod] [ 333.352657] [<ffffffffa014a56c>] process_incoming_rsps+0x2bc/0x770 [visorhba] [ 333.352661] [<ffffffff81095630>] ? wait_woken+0x80/0x80 [ 333.352663] [<ffffffffa014a2b0>] ? add_scsipending_entry+0x100/0x100 [visorhba] [ 333.352666] [<ffffffff81077759>] kthread+0xc9/0xe0 [ 333.352669] [<ffffffff814609d2>] ret_from_fork+0x22/0x40 [ 333.352671] [<ffffffff81077690>] ? kthread_create_on_node+0x180/0x180 [ 364.025672] sd 0:0:1:1: visorhba: initiating type=1 taskmgmt command [ 364.029721] visorhba: notifying initiator with result=0x1 [ 364.029726] sd 0:0:1:1: visorhba: taskmgmt type=1 success; result=0x1 Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Sell authored
We never issue SCSI commands of type CMD_VDISKMGMT_TYPE, so there is no need to have code that processes their completions. Signed-off-by: Tim Sell <Timothy.Sell@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Remove svn-ids and fix typos in the licence declaration. Add my copyright to the sdio code which I worked on mainly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
They were counted but never really used anywhere. Also change the printk to a debug print, since it mostly shows on the expected -ENOMEDIUM on card removal. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
The printouts are not needed, the driver core has enough debug output for this if wanted. So, use a helper to save boilerplate code. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
trans_start is gone from netdevice, so use the new helper function to set the mark. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
List all authors, beautify description, match license to what is stated in file headers, add firmware information. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
There is only this card supported, no need to iterate over the table. The resulting firmware filename wasn't used anyway, but came from the config file or hardcoded default. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Unlike the previous patches which are plain indent outcomes, this has some manual fixups to be not overly strict with the 80 char limit. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Let's simply specify the struct to keep in sync with kernel coding style. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
We want to remove it, but to do so properly, it is good to have a working example. Needs to be copied to /lib/firmware in order to be used. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Use proper type for size_t. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
We have sane defaults, so we don't need to bail out if there is no config file. Note that the config file should go away completely in favour of configuration mechanisms already upstream. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
The loop variable was defined but not really used. Fix this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
Move the one debug macro to the generic wlan header. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-