- 31 Jul, 2015 19 commits
-
-
David S. Miller authored
Roopa Prabhu says: ==================== af_mpls: fix undefined reference to ip6_route_output with CONFIG_IPV6=n This patch series uses ipv6_stub_impl.ipv6_dst_lookup instead of ip6_route_output. Follows the vxlan drivers usage of ipv6_stub_impl.ipv6_dst_lookup. There is no sk in the af_mpls context from where ipv6_stub_impl.ipv6_dst_lookup is used. sk appears to be needed to get the namespace 'net' and is optional otherwise. This patch series changes ipv6_stub_impl.ipv6_dst_lookup to take net argument. sk remains optional. v1 - v2: use IS_BUILTIN v2 - v3: Use new Kconfig option that depends on (IPV6 || IPV6=n) as suggested by Dave. Also uses IS_ERR as suggested by Thomas. v3 - v4: Include missed case of (MPLS_ROUTING=y && IPV6=m) reported by Dave. v4 - v5: Use ipv6_stub_impl.ipv6_dst_lookup as suggested by Hannes v5 - v6: protect against null ipv6_stub by statically declaring a ipv6_dst_lookup NOP func ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
Undefined reference to ip6_route_output and ip_route_output was reported with CONFIG_INET=n and CONFIG_IPV6=n. This patch uses ipv6_stub_impl.ipv6_dst_lookup instead of ip6_route_output. And wraps affected code under IS_ENABLED(CONFIG_INET) and IS_ENABLED(CONFIG_IPV6). Reported-by:
kbuild test robot <fengguang.wu@intel.com> Reported-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
This patch adds net argument to ipv6_stub_impl.ipv6_dst_lookup for use cases where sk is not available (like mpls). sk appears to be needed to get the namespace 'net' and is optional otherwise. This patch series changes ipv6_stub_impl.ipv6_dst_lookup to take net argument. sk remains optional. All callers of ipv6_stub_impl.ipv6_dst_lookup have been modified to pass net. I have modified them to use already available 'net' in the scope of the call. I can change them to sock_net(sk) to avoid any unintended change in behaviour if sock namespace is different. They dont seem to be from code inspection. Signed-off-by:
-
Alexei Starovoitov authored
Introduce helpers to let eBPF programs attached to TC manipulate tunnel metadata: bpf_skb_[gs]et_tunnel_key(skb, key, size, flags) skb: pointer to skb key: pointer to 'struct bpf_tunnel_key' size: size of 'struct bpf_tunnel_key' flags: room for future extensions First eBPF program that uses these helpers will allocate per_cpu metadata_dst structures that will be used on TX. On RX metadata_dst is allocated by tunnel driver. Typical usage for TX: struct bpf_tunnel_key tkey; ... populate tkey ... bpf_skb_set_tunnel_key(skb, &tkey, sizeof(tkey), 0); bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); RX: struct bpf_tunnel_key tkey = {}; bpf_skb_get_tunnel_key(skb, &tkey, sizeof(tkey), 0); ... lookup or redirect based on tkey ... 'struct bpf_tunnel_key' will be extended in the future by adding elements to the end and the 'size' argument will indicate which fields are populated, thereby keeping backwards compatibility. The 'flags' argument may be used as well when the 'size' is not enough or to indicate completely different layout of bpf_tunnel_key. Signed-off-by:Alexei Starovoitov <ast@plumgrid.com> Acked-by:
-
Woojung.Huh@microchip.com authored
Repost patch of driver for LAN7800 family of USB 2.0 & USB 3.0 to Gigabit Ethernet. - remove module param which can be configurable by standard mechanism. - remove other module parms except msg_level per review comment. - update to handle byte swap for statistics structure correctly. Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
-
Daniel Borkmann authored
This patch adds support to read the dmesg BPF JIT dump also from a file instead of the klog buffer. I found this quite useful when going through some 'before/after patch' logs. It also fixes a regex leak found by valgrind when no image dump was found. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: separate link aggregation from link layer We continue the work on separating the roles of the link aggregation and link layers, as well as making code cleanups in general. This second commit batch focuses on moving the orchestration of link failover and synchronization to the node level, as well as preparing the node lock structure for further future impovements. We also make some changes to message delivery between link and socket layer, in order to make this mechanism safer and less obscure. ==================== Signed-off-by: -
Jon Paul Maloy authored
We simplify the link creation function tipc_link_create() and the way the link struct it is connected to the node struct. In particular, we remove the duplicate initialization of some fields which are anyway set in tipc_link_reset(). Tested-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
Currently, when we extract small messages from a message bundle, or when many messages have accumulated in the link arrival queue, those messages are added one by one to the lock protected link input queue. This may increase contention with the reader of that queue, in the function tipc_sk_rcv(). This commit introduces a temporary, unprotected input queue in tipc_link_rcv() for such cases. Only when the arrival queue has been emptied, and the function is ready to return, does it splice the whole temporary queue into the real input queue. Tested-by:
-
Jon Paul Maloy authored
After the most recent changes, all access calls to a link which may entail addition of messages to the link's input queue are postpended by an explicit call to tipc_sk_rcv(), using a reference to the correct queue. This means that the potentially hazardous implicit delivery, using tipc_node_unlock() in combination with a binary flag and a cached queue pointer, now has become redundant. This commit removes this implicit delivery mechanism both for regular data messages and for binding table update messages. Tested-by:
-
Jon Paul Maloy authored
In order to facilitate future improvements to the locking structure, we want to make resetting and establishing of links non-atomic. I.e., the functions tipc_node_link_up() and tipc_node_link_down() should be called from outside the node lock context, and grab/release the node lock themselves. This requires that we can freeze the link state from the moment it is set to RESETTING or PEER_RESET in one lock context until it is set to RESET or ESTABLISHING in a later context. The recently introduced link FSM makes this possible, so we are now ready to introduce the above change. This commit implements this. Tested-by:
-
Jon Paul Maloy authored
The node lock is currently grabbed and and released in the function tipc_disc_rcv() in the file discover.c. As a preparation for the next commits, we need to move this node lock handling, along with the code area it is covering, to node.c. This commit introduces this change. Tested-by:
-
Jon Paul Maloy authored
Until now, we have been handling link failover and synchronization by using an additional link state variable, "exec_mode". This variable is not independent of the link FSM state, something causing a risk of inconsistencies, apart from the fact that it clutters the code. The conditions are now in place to define a new link FSM that covers all existing use cases, including failover and synchronization, and eliminate the "exec_mode" field altogether. The FSM must also support non-atomic resetting of links, which will be introduced later. The new link FSM is shown below, with 7 states and 8 events. Only events leading to state change are shown as edges. +------------------------------------+ |RESET_EVT | | | | +--------------+ | +-----------------| SYNCHING |-----------------+ | |FAILURE_EVT +--------------+ PEER_RESET_EVT| | | A | | | | | | | | | | | | | | |SYNCH_ |SYNCH_ | | | |BEGIN_EVT |END_EVT | | | | | | | V | V V | +-------------+ +--------------+ +------------+ | | RESETTING |<---------| ESTABLISHED |--------->| PEER_RESET | | +-------------+ FAILURE_ +--------------+ PEER_ +------------+ | | EVT | A RESET_EVT | | | | | | | | | | | | | +--------------+ | | | RESET_EVT| |RESET_EVT |ESTABLISH_EVT | | | | | | | | | | | | V V | | | +-------------+ +--------------+ RESET_EVT| +--->| RESET |--------->| ESTABLISHING |<----------------+ +-------------+ PEER_ +--------------+ | A RESET_EVT | | | | | | | |FAILOVER_ |FAILOVER_ |FAILOVER_ |BEGIN_EVT |END_EVT |BEGIN_EVT | | | V | | +-------------+ | | FAILINGOVER |<----------------+ +-------------+ These changes are fully backwards compatible. Tested-by: -
Jon Paul Maloy authored
The implementation of the link FSM currently takes decisions about and sends out link protocol messages. This is unnecessary, since such actions are not the result of any link state change, and are even decided based on non-FSM state information ("silent_intv_cnt"). We now move the sending of unicast link protocol messages to the function tipc_link_timeout(), and the initial broadcast synchronization message to tipc_node_link_up(). The latter is done because a link instance should not need to know whether it is the first or second link to a destination. Such information is now restricted to and handled by the link aggregation layer in node.c Tested-by: -
Jon Paul Maloy authored
Link failover and synchronization have until now been handled by the links themselves, forcing them to have knowledge about and to access parallel links in order to make the two algorithms work correctly. In this commit, we move the control part of this functionality to the link aggregation level in node.c, which is the right location for this. As a result, the two algorithms become easier to follow, and the link implementation becomes simpler. Tested-by:
-
Jon Paul Maloy authored
In the next commit, we will move link synch/failover orchestration to the link aggregation level. In order to do this, we first need to extend the node FSM with two more states, NODE_SYNCHING and NODE_FAILINGOVER, plus four new events to enter and leave those states. This commit introduces this change, without yet making use of it. The node FSM now looks as follows: +-----------------------------------------+ | PEER_DOWN_EVT| | | +------------------------+----------------+ | |SELF_DOWN_EVT | | | | | | | | +-----------+ +-----------+ | | |NODE_ | |NODE_ | | | +----------|FAILINGOVER|<---------|SYNCHING |------------+ | | |SELF_ +-----------+ FAILOVER_+-----------+ PEER_ | | | |DOWN_EVT | A BEGIN_EVT A | DOWN_EVT| | | | | | | | | | | | | | | | | | | | |FAILOVER_|FAILOVER_ |SYNCH_ |SYNCH_ | | | | |END_EVT |BEGIN_EVT |BEGIN_EVT|END_EVT | | | | | | | | | | | | | | | | | | | | | +--------------+ | | | | | +------->| SELF_UP_ |<-------+ | | | | +----------------| PEER_UP |------------------+ | | | | |SELF_DOWN_EVT +--------------+ PEER_DOWN_EVT| | | | | | A A | | | | | | | | | | | | | | PEER_UP_EVT| |SELF_UP_EVT | | | | | | | | | | | V V V | | V V V +------------+ +-----------+ +-----------+ +------------+ |SELF_DOWN_ | |SELF_UP_ | |PEER_UP_ | |PEER_DOWN | |PEER_LEAVING|<------|PEER_COMING| |SELF_COMING|------>|SELF_LEAVING| +------------+ SELF_ +-----------+ +-----------+ PEER_ +------------+ | DOWN_EVT A A DOWN_EVT | | | | | | | | | | SELF_UP_EVT| |PEER_UP_EVT | | | | | | | | | |PEER_DOWN_EVT +--------------+ SELF_DOWN_EVT| +------------------->| SELF_DOWN_ |<--------------------+ | PEER_DOWN | +--------------+ Tested-by: -
Jon Paul Maloy authored
In many cases the call order when a link is reset goes as follows: tipc_node_xx()->tipc_link_reset()->tipc_node_link_down() This is not the right order if we want the node to be in control, so in this commit we change the order to: tipc_node_xx()->tipc_node_link_down()->tipc_link_reset() The fact that tipc_link_reset() now is called from only one location with a well-defined state will also facilitate later simplifications of tipc_link_reset() and the link FSM. Tested-by:
-
Jon Paul Maloy authored
In line with our effort to let the node level have full control over its links, we want to move all link reset calls from link.c to node.c. Some of the calls can be moved by simply moving the calling function, when this is the right thing to do. For the remaining calls we use the now established technique of returning a TIPC_LINK_DOWN_EVT flag from tipc_link_rcv(), whereafter we perform the reset call when the call returns. This change serves as a preparation for the coming commits. Tested-by:
-
Jon Paul Maloy authored
The function tipc_link_activate() is redundant, since it mostly performs settings that have already been done in a preceding tipc_link_reset(). There are three exceptions to this: - The actual state change to TIPC_LINK_WORKING. This should anyway be done in the FSM, and not in a separate function. - Registration of the link with the bearer. This should be done by the node, since we don't want the link to have any knowledge about its specific bearer. - Call to tipc_node_link_up() for user access registration. With the new role distribution between link aggregation and link level this becomes the wrong call order; tipc_node_link_up() should instead be called directly as a result of a TIPC_LINK_UP event, hence by the node itself. This commit implements those changes. Tested-by:
-
- 30 Jul, 2015 21 commits
-
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-07-30 Here's a set of Bluetooth & 802.15.4 patches intended for the 4.3 kernel. - Cleanups & fixes to mac802154 - Refactoring of Intel Bluetooth HCI driver - Various coding style fixes to Bluetooth HCI drivers - Support for Intel Lightning Peak Bluetooth devices - Generic class code in interface descriptor in btusb to match more HW - Refactoring of Bluetooth HS code together with a new config option - Support for BCM4330B1 Broadcom UART controller Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Hangbin Liu authored
Commit 6fd99094 ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Minor BPF updates Various minor misc updates. ==================== Signed-off-by: -
Daniel Borkmann authored
It can be useful for testing to see the actual process/pid who is loading a given filter. I was running some BPF test program and noticed unusual filter loads from time to time, triggered by some other application in the background. bpf_jit_disasm is still working after this change. Signed-off-by:
-
Daniel Borkmann authored
When bpf_jit_compile() got split into two functions via commit f3c2af7b ("net: filter: x86: split bpf_jit_compile()"), bpf_jit_dump() was changed to always show 0 as number of compiler passes. Change it to dump the actual number. Also on sparc, we count passes starting from 0, so add 1 for the debug dump as well. Signed-off-by:
-
Daniel Borkmann authored
During recent discussions we had with Michael, we found that it would be useful to have an indicator that tells the JIT that an eBPF program had been migrated from classic instructions into eBPF instructions, as only in that case A and X need to be cleared in the prologue. Such eBPF programs do not set a particular type, but all have BPF_PROG_TYPE_UNSPEC. Thus, introduce a small helper for cde66c2d ("s390/bpf: Only clear A and X for converted BPF programs") and possibly others in future. Signed-off-by:
-
Daniel Borkmann authored
As JITs start to perform optimizations whether to clear A and X on eBPF programs in the prologue, we should actually assign a program type to the native eBPF test cases. It doesn't really matter which program type, as these instructions don't go through the verifier, but it needs to be a type != BPF_PROG_TYPE_UNSPEC. This reflects eBPF programs loaded via bpf(2) system call (!= type unspec) vs. classic BPF to eBPF migrations (== type unspec). Signed-off-by:
-
Yuval Mintz authored
Commit 05cc5a39 ("bnx2x: add vlan filtering offload") has broken compilation when CONFIG_BNX2X_SRIOV is not set. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Alexander Aring authored
This patch fix a possible race after calling register_netdev. After calling netdev_register it could be possible that netdev_ops callbacks use the uninitialized private data of lowpan_dev. By moving the initialization of this data before netdev_register we can be sure that initialized private data is be used after netdev_register. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Lennert Buytenhek authored
When transmitting a packet via a mac802154 driver that can sleep in its transmit function, mac802154 defers the call to the driver's transmit function to a per-device workqueue. However, mac802154 uses a single global work_struct for this, which means that if you have more than one registered mac802154 interface in the system, and you transmit on more than one of them at the same time, you'll very easily cause memory corruption. This patch moves the deferred transmit processing state from global variables to struct ieee802154_local, and this seems to fix the memory corruption issue. Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Acked-by:
-
Alexander Aring authored
According Documentation/timers/timers-howto.txt the usually case for setting up a hrtimer takes > ~10us. So we should use udelay in this case so we are sure that the state change was done, before doing the state change assert. Signed-off-by:
-
Christophe JAILLET authored
There is no need to use the safe version of list_for_each here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Daniel Drake authored
btusb currently has a generic match on USB device descriptors: { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, However, http://www.usb.org/developers/defined_class states: Base Class E0h (Wireless Controller) This base class is defined for devices that are Wireless controllers. Values not shown in the table below are reserved. These class codes are to be used in Interface Descriptors, with the exception of the Bluetooth class code which can also be used in a Device Descriptor. Add a match on the interface descriptors accordingly. This fixes compatibility with the RTL8723AU device shown below. This device conforms to the USB Interface Association Descriptor specification, which requires the device to have class ef/02/01. The extra IAD descriptor then specifies that interfaces 0 and 1 belong to the same function/driver, which is true. Provided that the Bluetooth device class spec accepts use of the IAD, I imagine that technically, all btusb devices should be configured like this. T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=0724 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723au E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us Signed-off-by:Daniel Drake <drake@endlessm.com> Signed-off-by:
-
Arron Wang authored
To avoid amp module hooks from hci_event.c Signed-off-by:
Arron Wang <arron.wang@intel.com> Signed-off-by:
-
Arron Wang authored
To avoid amp module hooks from hci_event.c Signed-off-by:
-
Arron Wang authored
To avoid a2mp module hooks from hci_event.c and send getinfo response operation only required by a2mp module, we can move this callback to a2mp.c Signed-off-by:
-
Arron Wang authored
Signed-off-by:
-
Arron Wang authored
Move A2MP Module under BT_HS config option and allow the user have flexible option to choose the feature only they need a2mp_discover_amp() & a2mp_channel_create() are a2mp module entry point for master and slave, and this is dynamic invoked depends on the userspace or remote request, then we defined their implementation depends on BT_HS config Signed-off-by:
-
Frederic Danis authored
Add "waiting for configuration" address. Add lmp_subver and firmware name for BCM4330B1 controller. Signed-off-by:
Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== Introduce Mellanox Technologies Switch ASICs switchdev drivers This patchset introduces Mellanox Technologies Switch driver infrastructure and support for SwitchX-2 ASIC. The driver is divided into 3 logical parts: 1) Bus - implements switch bus interface. Currently only PCI bus is implemented, but more buses will be added in the future. Namely I2C and SGMII. (patch #2) 2) Driver - implemements of ASIC-specific functions. Currently SwitchX-2 ASIC is supported, but a plan exists to introduce support for Spectrum ASIC in the near future. (patch #4) 3) Core - infrastructure that glues buses and drivers together. It implements register access logic (EMADs) and takes care of RX traps and events. (patch #1 and #3) ==================== Signed-off-by:
-
