- 07 Dec, 2015 5 commits
-
-
Tomer Tayar authored
Concurrent non-blocking slowpath ramrods can be completed out-of-order on the completion chain. Recycling completed elements, while previously sent elements are still completion pending, can lead to overriding of active elements on the chain. Furthermore, sending pending slowpath ramrods currently lacks the update of the chain element physical pointer. This patch: * Ensures that ramrods are sent to the FW with consecutive echo values. * Handles out-of-order completions by freeing only first successive completed entries. * Updates the chain element physical pointer when copying a pending element into a free element for sending. Signed-off-by:
Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
The amount of chain next pointer elements between the producer and the consumer indices depends on which pages they currently point to. The current calculation is based only on their difference, and it can lead to a number of free elements which is higher by 1 than the actual value. Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "dma_map_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Felix Fietkau authored
This semicolon causes a build error if the function call is wrapped in parentheses. Fixes: aabc92bb ("net: add __netdev_alloc_pcpu_stats() to indicate gfp flags") Reported-by:
Imre Kaloz <kaloz@openwrt.org> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
lucien authored
when A sends a data to B, then A close() and enter into SHUTDOWN_PENDING state, if B neither claim his rwnd is 0 nor send SACK for this data, A will keep retransmitting this data until t5 timeout, Max.Retrans times can't work anymore, which is bad. if B's rwnd is not 0, it should send abort after Max.Retrans times, only when B's rwnd == 0 and A's retransmitting beyonds Max.Retrans times, A will start t5 timer, which is also commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") means, but it lacks the condition peer rwnd == 0. so fix it by adding a bit (zero_window_announced) in peer to record if the last rwnd is 0. If it was, zero_window_announced will be set. and use this bit to decide if start t5 timer when local.state is SHUTDOWN_PENDING. Fixes: commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
- 06 Dec, 2015 10 commits
-
-
lucien authored
If the chunks are enqueued successfully but sctp_cmd_interpreter() return err to sctp_sendmsg() (mainly because of no mem), the chunks will get re-queued, but we are dropping the reference and freeing them. The fix is to just drop the reference on the datamsg just as it had succeeded, as: - if the chunks weren't queued, this is enough to get them freed. - if they were queued, they will get freed when they finally get out or discarded. Signed-off-by:
-
lucien authored
When a msg is sent, sctp will hold the chunks of this msg and then try to enqueue them. But if the chunks are not enqueued in sctp_outq_tail() because of the invalid state, sctp_cmd_interpreter() may still return success to sctp_sendmsg() after calling sctp_outq_flush(), these chunks will become orphans and will leak. So we fix them by moving sctp_chunk_hold() to sctp_outq_tail(), where we are sure that the chunk is going to get queued. Signed-off-by:
-
Stefan Wahren authored
In case of a tx queue timeout every transmit is blocked until the QCA7000 resets himself and triggers a sync which makes the driver flushs the tx ring. So avoid this blocking situation by triggering the sync immediately after the timeout. Waking the queue doesn't make sense in this situation. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by:
-
Bjørn Mork authored
The Huawei E3372 (12d1:157d) needs this quirk in MBIM mode as well. Allow this by forcing the NTB to contain only a single NDP, and add a device specific entry for this ID. Due to the way Huawei use device IDs, this might be applied to other modems as well. It is assumed that those modems will be based on the same firmware and will need this quirk too. If not, it will still not harm normal usage, although multiplexing performance could be impacted. Cc: Enrico Mioso <mrkiko.rs@gmail.com> Reported-by:
Sami Farin <hvtaifwkbgefbaei@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-By:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
-
David S. Miller authored
This reverts commit d3716f18. vmalloc cannot be used in BH disabled contexts, even with GFP_ATOMIC. And we certainly want to support rhashtable users inserting entries with software interrupts disabled. Signed-off-by:
-
Sergei Shtylyov authored
Add myself as a reviewer for the Renesas Ethernet drivers -- hopefully I won't miss the buggy patches anymore. :-) Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: packet timestamp fixes These a couple of fixes regarding sctp/packet timestamps. Dmitry Vyukov <dvyukov@google.com> reported the counter leak on missing net_enable_timestamp() (2nd patch) and further testing here revealed the other two issues. Please consider these to -stable. ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
As we are keeping timestamps on when copying the socket, we also have to copy sk_tsflags. This is needed since b9f40e21 ("net-timestamp: move timestamp flags out of sk_flags"). Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy related to disabling sock timestamp. When SCTP accepts an association or peel one off, it copies sock flags but forgot to call net_enable_timestamp() if a packet timestamping flag was copied, leading to extra calls to net_disable_timestamp() whenever such clones were closed. The fix is to call net_enable_timestamp() whenever we copy a sock with that flag on, like tcp does. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
SCTP echoes a cookie o INIT ACK chunks that contains a timestamp, for detecting stale cookies. This cookie is echoed back to the server by the client and then that timestamp is checked. Thing is, if the listening socket is using packet timestamping, the cookie is encoded with ktime_get() value and checked against ktime_get_real(), as done by __net_timestamp(). The fix is to sctp also use ktime_get_real(), so we can compare bananas with bananas later no matter if packet timestamping was enabled or not. Fixes: 52db882f ("net: sctp: migrate cookie life from timeval to ktime") Signed-off-by:
-
- 05 Dec, 2015 6 commits
-
-
Jiri Benc authored
Commit 3511494c ("vxlan: Group Policy extension") changed definition of VXLAN_HF_RCO from 0x00200000 to BIT(24). This is obviously incorrect. It's also in violation with the RFC draft. Fixes: 3511494c ("vxlan: Group Policy extension") Cc: Thomas Graf <tgraf@suug.ch> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Bjørn Mork authored
Commit 64236f3f ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") failed to update the setting of the IFA_F_OPTIMISTIC flag, causing the IFA_F_STABLE_PRIVACY flag to be lost if IFA_F_OPTIMISTIC is set. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: 64236f3f ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Giuseppe CAVALLARO authored
There is a memleak when suspend/resume this driver version. Currently the stmmac, during resume step, reallocates all the resources but they are not released when suspend. The patch is not to release these resources but the logic has been changed. In fact, it is not necessary to free and reallocate all from scratch because the memory data will be always preserved. As final solution, the patch just reinit the descriptors and the rx/tx pointers only when resume. Tested done on STi boxes. Reported-by:
ZhengShunQian <zhengsq@rock-chips.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sergei Shtylyov authored
The Rx queue #1 frame error counter name contains trailing underscore, probably due to a typo... Signed-off-by:
-
Sergei Shtylyov authored
In a low memory situation the following kernel oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = 8490c000 [00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.4-at16 #9) PC is at skb_put+0x10/0x98 LR is at sh_eth_poll+0x2c8/0xa10 pc : [<8035f780>] lr : [<8028bf50>] psr: 60000113 sp : 84eb1a90 ip : 84eb1ac8 fp : 84eb1ac4 r10: 0000003f r9 : 000005ea r8 : 00000000 r7 : 00000000 r6 : 940453b0 r5 : 00030000 r4 : 9381b180 r3 : 00000000 r2 : 00000000 r1 : 000005ea r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4248c059 DAC: 00000015 Process klogd (pid: 2046, stack limit = 0x84eb02e8) [...] This is because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left NULL but sh_eth_rx() later uses it without checking. Add such check... Reported-by:
Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-12-03 This series contains updates to ixgbe, i40e/i40evf, MAINTAINERS and e100.txt Alex provides a fix for ixgbe where enabling SR-IOV and then bringing the interface up was resulting in the PF MAC addresses getting into a bad state. The workaround for this issue is to bring up the interface first and then enable SR-IOV as this will trigger the reset in the existing code. I clean up legacy license stuff in the e100.txt documentation and then update the maintainers/reviewers list for our drivers. Jesse fixes an issue with the i40e/i40evf drivers, where if the driver were to happen to have a mutex held while the i40e_init_adminq() call was called, the init_adminq might inadvertently call mutex_init on a lock that was held which is a violation of the calling semantices. ==================== Signed-off-by:
-
- 04 Dec, 2015 10 commits
-
-
Pavel Machek authored
atl1c driver is doing order-4 allocation with GFP_ATOMIC priority. That often breaks networking after resume. Switch to GFP_KERNEL. Still not ideal, but should be significantly better. atl1c_setup_ring_resources() is called from .open() function, and already uses GFP_KERNEL, so this change is safe. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Herbert Xu authored
When an rhashtable user pounds rhashtable hard with back-to-back insertions we may end up growing the table in GFP_ATOMIC context. Unfortunately when the table reaches a certain size this often fails because we don't have enough physically contiguous pages to hold the new table. Eric Dumazet suggested (and in fact wrote this patch) using __vmalloc instead which can be used in GFP_ATOMIC context. Reported-by:
Phil Sutter <phil@nwl.cc> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Nicolas Dichtel authored
Parameters were updated only if the kernel was unable to find the tunnel with the new parameters, ie only if core pamareters were updated (keys, addr, link, type). Now it's possible to update ttl, hoplimit, flowinfo and flags. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Guillaume Nault authored
pppoe_connect() mustn't touch the padt_work field of pppoe sockets because that work could be already pending. [ 21.473147] BUG: unable to handle kernel NULL pointer dereference at 00000004 [ 21.474523] IP: [<c1043177>] process_one_work+0x29/0x31c [ 21.475164] *pde = 00000000 [ 21.475513] Oops: 0000 [#1] SMP [ 21.475910] Modules linked in: pppoe pppox ppp_generic slhc crc32c_intel aesni_intel virtio_net xts aes_i586 lrw gf128mul ablk_helper cryptd evdev acpi_cpufreq processor serio_raw button ext4 crc16 mbcache jbd2 virtio_blk virtio_pci virtio_ring virtio [ 21.476168] CPU: 2 PID: 164 Comm: kworker/2:2 Not tainted 4.4.0-rc1 #1 [ 21.476168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 21.476168] task: f5f83c00 ti: f5e28000 task.ti: f5e28000 [ 21.476168] EIP: 0060:[<c1043177>] EFLAGS: 00010046 CPU: 2 [ 21.476168] EIP is at process_one_work+0x29/0x31c [ 21.484082] EAX: 00000000 EBX: f678b2a0 ECX: 00000004 EDX: 00000000 [ 21.484082] ESI: f6c69940 EDI: f5e29ef0 EBP: f5e29f0c ESP: f5e29edc [ 21.484082] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 21.484082] CR0: 80050033 CR2: 000000a4 CR3: 317ad000 CR4: 00040690 [ 21.484082] Stack: [ 21.484082] 00000000 f6c69950 00000000 f6c69940 c0042338 f5e29f0c c1327945 00000000 [ 21.484082] 00000008 f678b2a0 f6c69940 f678b2b8 f5e29f30 c1043984 f5f83c00 f6c69970 [ 21.484082] f678b2a0 c10437d3 f6775e80 f678b2a0 c10437d3 f5e29fac c1047059 f5e29f74 [ 21.484082] Call Trace: [ 21.484082] [<c1327945>] ? _raw_spin_lock_irq+0x28/0x30 [ 21.484082] [<c1043984>] worker_thread+0x1b1/0x244 [ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229 [ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229 [ 21.484082] [<c1047059>] kthread+0x8f/0x94 [ 21.484082] [<c1327a32>] ? _raw_spin_unlock_irq+0x22/0x26 [ 21.484082] [<c1327ee9>] ret_from_kernel_thread+0x21/0x38 [ 21.484082] [<c1046fca>] ? kthread_parkme+0x19/0x19 [ 21.496082] Code: 5d c3 55 89 e5 57 56 53 89 c3 83 ec 24 89 d0 89 55 e0 8d 7d e4 e8 6c d8 ff ff b9 04 00 00 00 89 45 d8 8b 43 24 89 45 dc 8b 45 d8 <8b> 40 04 8b 80 e0 00 00 00 c1 e8 05 24 01 88 45 d7 8b 45 e0 8d [ 21.496082] EIP: [<c1043177>] process_one_work+0x29/0x31c SS:ESP 0068:f5e29edc [ 21.496082] CR2: 0000000000000004 [ 21.496082] ---[ end trace e362cc9cf10dae89 ]--- Reported-by:
Andrew <nitr0@seti.kr.ua> Fixes: 287f3a94 ("pppoe: Use workqueue to die properly when a PADT is received") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
David S. Miller authored
Marcin Wojtas says: ==================== Marvell Armada 375 mvpp2 fixes During my work on mvneta driver I revised mvpp2, and it occurred that the initial version of Marvell Armada 375 SoC comprised bugs around DMA-unmapping in both ingress and egress paths - not all buffers were umapped in TX path and none(!) in RX. Three patches that I send fix this situation. Any feedback would be welcome. ==================== Signed-off-by: -
Marcin Wojtas authored
In hitherto code in case of RX buffer allocation error during refill, original buffer is pushed to the network stack, but the amount of available buffer pointers in BM pool is decreased. This commit fixes the situation by moving refill call before skb_put(), and returning original buffer pointer to the pool in case of an error. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by:
-
Marcin Wojtas authored
Each allocated buffer, whose pointer is put into BM pool is DMA-mapped. Hence it should be properly unmapped after usage or when removing buffers from pool. This commit fixes DMA handling on RX path by adding dma_unmap_single() in mvpp2_rx() and in mvpp2_bufs_free(). The latter function's argument number had to be increased for this purpose. Signed-off-by:
-
Marcin Wojtas authored
The Tx descriptor release code currently calls dma_unmap_single() and dev_kfree_skb_any() if the descriptor is associated with a non-NULL skb. This condition is true only for the last fragment of the packet. Since every descriptor's buffer is DMA-mapped it has to be properly unmapped. Signed-off-by:
-
Herbert Xu authored
Thomas and Phil observed that under stress rhashtable insertion sometimes failed with EBUSY, even though this error should only ever been seen when we're under attack and our hash chain length has grown to an unacceptable level, even after a rehash. It turns out that the logic for detecting whether there is an existing rehash is faulty. In particular, when two threads both try to grow the same table at the same time, one of them may see the newly grown table and thus erroneously conclude that it had been rehashed. This is what leads to the EBUSY error. This patch fixes this by remembering the current last table we used during insertion so that rhashtable_insert_rehash can detect when another thread has also done a resize/rehash. When this is detected we will give up our resize/rehash and simply retry the insertion with the new table. Reported-by:
Thomas Graf <tgraf@suug.ch> Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "A lot of Thanksgiving turkey leftovers accumulated, here goes: 1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg. 2) IDs for some new iwlwifi chips, from Oren Givon. 3) Fix rtlwifi lockups on boot, from Larry Finger. 4) Fix memory leak in fm10k, from Stephen Hemminger. 5) We have a route leak in the ipv6 tunnel infrastructure, fix from Paolo Abeni. 6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim. 7) Wrong lockdep annotations in tcp md5 support, fix from Eric Dumazet. 8) Work around some middle boxes which prevent proper handling of TCP Fast Open, from Yuchung Cheng. 9) TCP repair can do huge kmalloc() requests, build paged SKBs instead. From Eric Dumazet. 10) Fix msg_controllen overflow in scm_detach_fds, from Daniel Borkmann. 11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from Nikolay Aleksandrov. 12) Fix use after free in epoll with AF_UNIX sockets, from Rainer Weikusat. 13) Fix double free in VRF code, from Nikolay Aleksandrov. 14) Fix skb leaks on socket receive queue in tipc, from Ying Xue. 15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian. 16) Fix clearing of persistent array maps in bpf, from Daniel Borkmann. 17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq early enough. From Eric Dumazet. 18) Fix out of bounds accesses in bpf array implementation when updating elements, from Daniel Borkmann. 19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric Dumazet. 20) When dumping proxy neigh entries, we have to accomodate NULL device pointers properly, from Konstantin Khlebnikov. 21) SCTP doesn't release all ipv6 socket resources properly, fix from Eric Dumazet. 22) Prevent underflows of sch->q.qlen for multiqueue packet schedulers, also from Eric Dumazet. 23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey Huang and Michael Chan. 24) Don't actively scan radar channels, from Antonio Quartulli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits) net: phy: reset only targeted phy bnxt_en: Setup uc_list mac filters after resetting the chip. bnxt_en: enforce proper storing of MAC address bnxt_en: Fixed incorrect implementation of ndo_set_mac_address net: lpc_eth: remove irq > NR_IRQS check from probe() net_sched: fix qdisc_tree_decrease_qlen() races openvswitch: fix hangup on vxlan/gre/geneve device deletion ipv4: igmp: Allow removing groups from a removed interface ipv6: sctp: implement sctp_v6_destroy_sock() arm64: bpf: add 'store immediate' instruction ipv6: kill sk_dst_lock ipv6: sctp: add rcu protection around np->opt net/neighbour: fix crash at dumping device-agnostic proxy entries sctp: use GFP_USER for user-controlled kmalloc sctp: convert sack_needed and sack_generation to bits ipv6: add complete rcu protection around np->opt bpf: fix allocation warnings in bpf maps and integer overflow mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0 net: mvneta: enable setting custom TX IP checksum limit net: mvneta: fix error path for building skb ...
-
- 03 Dec, 2015 9 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A collection of fixes from this series. The most important here is a regression fix for an issue that some folks would hit in blk-merge.c, and the NVMe queue depth limit for the screwed up Apple "nvme" controller. In more detail, this pull request contains: - a set of fixes for null_blk, including a fix for a few corner cases where we could hang the device. From Arianna and Paolo. - lightnvm: - A build improvement from Keith. - Update the qemu pci id detection from Matias. - Error handling fixes for leaks and other little fixes from Sudip and Wenwei. - fix from Eric where BLKRRPART would not return EBUSY for whole device mounts, only when partitions were mounted. - fix from Jan Kara, where EOF O_DIRECT reads would return negatively. - remove check for rq_mergeable() when checking limits for cloned requests. The check doesn't make any sense. It's assuming that since NOMERGE is set on the request that we don't have to recalculate limits since the request didn't change, but that's not true if the request has been redirected. From Hannes. - correctly get the bio front segment value set for single segment bio's, fixing a BUG() in blk-merge. From Ming" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: temporary fix for Apple controller reset null_blk: change type of completion_nsec to unsigned long null_blk: guarantee device restart in all irq modes null_blk: set a separate timer for each command blk-merge: fix computing bio->bi_seg_front_size in case of single segment direct-io: Fix negative return from dio read beyond eof block: Always check queue limits for cloned requests lightnvm: missing nvm_lock acquire lightnvm: unconverted ppa returned in get_bb_tbl lightnvm: refactor and change vendor id for qemu lightnvm: do device max sectors boundary check first lightnvm: fix ioctl memory leaks lightnvm: free memory when gennvm register fails lightnvm: Simplify config when disabled Return EBUSY from BLKRRPART for mounted whole-dev fs -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "During the merge window I added a new file that is used to filter trace events on pids. It filters all events where only tasks with their pid in that file exists. It also handles the sched_switch and sched_wakeup trace events where the current task does not have its pid in the file, but the task either being switched to or awaken does. Unfortunately, I forgot about sched_wakeup_new and sched_waking. Both of these tracepoints use the same class as the sched_wakeup tracepoint, and they too should be included in what gets filtered by the set_event_pid file" * tag 'trace-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add sched_wakeup_new and sched_waking tracepoints for pid filter
-
Jesse Brandeburg authored
If the driver were to happen to have a mutex held while the i40e_init_adminq call was called, the init_adminq might inadvertently call mutex_init on a lock that was held which is a violation of the calling semantics. Fix this by avoiding adminq.c code allocating/freeing this memory, and then do the same work only once in probe/remove. Testing Hints (Required if no HSD): for VF, load i40evf in bare metal and echo 32 > sriov_numvfs; echo 0 > sriov_numvfs in a loop. Yes this is a horrible thing to do. Change-ID: Ida263c51b34e195252179e7e5e400d73a99be7a2 Reported-by:
Stefan Assmann <sassmann@redhat.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jeff Kirsher authored
Since Matthew has moved on to other pastures and no longer works for Intel, remove him from the list of reviewers and add Bruce Allan as his replacement. CC: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: -
Jeff Kirsher authored
Apparently the e100.txt document contained a "License" section left over from days of old, which does not need to be in the kernel documentation. So clean it up.. CC: John Ronciak <john.ronciak@intel.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A small set of fixes for 4.4: * fix scanning in mac80211 to not actively scan radar channels (from Antonio) * fix uninitialized variable in remain-on-channel that could lead to treating frame TX as remain-on-channel and not sending the frame at all * remove NL80211_FEATURE_FULL_AP_CLIENT_STATE again, it was broken and needs more work, we'll enable it later * fix call_rcu() induced use-after-reset/free in mesh (that was suddenly causing issues in certain tests) * always request block-ack window size 64 as we found some APs will otherwise crash (really ...) * fix P2P-Device teardown sequence to avoid restarting with uninitialized data ==================== Signed-off-by:
-
Alexander Duyck authored
Enabling SR-IOV and then bringing the interface up was resulting in the PF MAC addresses getting into a bad state. Specifically the MAC address was enabled for both VF 0 and the PF. This resulted in some odd behaviors such as VF 0 receiving a copy of the PFs traffic, which in turn enables the ability for VF 0 to spoof the PF. A workaround for this issue appears to be to bring up the interface first and then enable SR-IOV as this way the reset is then triggered in the existing code. In order to correct this I have added a change to ixgbe_setup_tc where if the interface is down we still will at least call ixgbe_reset so that the MAC addresses for the device are reset to the correct pools. Steps to reproduce issue: modprobe ixgbe echo 7 > /sys/bus/pci/devices/0000\:01\:00.1/sriov_numvfs ifconfig enp1s0f1 up ethregs -s 1:00.1 | grep MPSAR | grep -v 00000000 Result: MPSAR[0] 00000081 MPSAR[254] 00000001 Expected Result, behavior after patch: MPSAR[0] 00000080 MPSAR[254] 00000080 Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Tested-by:
Darin Miller <darin.j.miller@intel.com> Signed-off-by:
-
Jérôme Pouiller authored
It is possible to address another chip on same MDIO bus. The case is correctly handled for media advertising. It is taken into account only if mii_data->phy_id == phydev->addr. However, this condition was missing for reset case. Signed-off-by:
Jérôme Pouiller <jezz@sysmic.org> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: set mac address and uc_list bug fixes. Fix ndo_set_mac_address() for PF and VF. Re-apply uc_list after chip reset. v2: Fix compile error if CONFIG_BNXT_SRIOV is not set. ==================== Signed-off-by:
-
