We always use skip in combination with exit_code being 0
(KSFT_PASS). This are basic KSFT / KTAP semantics.
Store the right KSFT_* code in exit_code directly.

This makes it easier to support tests reporting other
extended KSFT_* codes like XFAIL / XPASS.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we added variant support generating full test case
name takes 4 string arguments. We're about to need it
in another two places. Stop the duplication and print
once into a temporary buffer.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we no longer need low exit codes to communicate
assertion steps - use normal KSFT exit codes.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace Landlock-specific TEST_F_FORK() with an improved TEST_F() which
brings four related changes:

Run TEST_F()'s tests in a grandchild process to make it possible to
drop privileges and delegate teardown to the parent.

Compared to TEST_F_FORK(), simplify handling of the test grandchild
process thanks to vfork(2), and makes it generic (e.g. no explicit
conversion between exit code and _metadata).

Compared to TEST_F_FORK(), run teardown even when tests failed with an
assert thanks to commit 63e6b2a4 ("selftests/harness: Run TEARDOWN
for ASSERT failures").

Simplify the test harness code by removing the no_print and step fields
which are not used.  I added this feature just after I made
kselftest_harness.h more broadly available but this step counter
remained even though it wasn't needed after all. See commit 369130b6
("selftests: Enhance kselftest_harness.h to print which assert failed").

Replace spaces with tabs in one line of __TEST_F_IMPL().

Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This has the effect of creating a new test process for either TEST_F()
or TEST_F_FORK(), which doesn't change tests but will ease potential
backports.  See next commit for the TEST_F_FORK() merge into TEST_F().

Cc: Günther Noack <gnoack@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Justin Chen says:

====================
Support for ASP 2.2 and optimizations

ASP 2.2 adds some power savings during low power modes.

Also make various improvements when entering low power modes and
reduce MDIO traffic by hooking up interrupts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Hook up the phy interrupts for internal phys to reduce mdio traffic
and improve responsiveness of link changes.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no advantage of freeing and re-allocating buffers through
suspend and resume. This waste cycles and makes suspend/resume time
longer. We also open ourselves to failed allocations in systems with
heavy memory fragmentation.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mdio compat string for ASP 2.0 ethernet driver.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ASP 2.2 improves power savings during low power modes.

A new register was added to toggle to a slower clock during low
power modes.

EEE was broken for ASP 2.0/2.1. A HW workaround was added for
ASP 2.2 that requires toggling a chicken bit.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ASP 2.2.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ASP 2.2 Ethernet controller uses a brcm unimac.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Robert Marko says:

====================
net: phy: qcom: qca808x: fill in possible_interfaces

QCA808x does not currently fill in the possible_interfaces.

This leads to Phylink not being aware that it supports 2500Base-X as well
so in cases where it is connected to a DSA switch like MV88E6393 it will
limit that port to phy-mode set in the DTS.

That means that if SGMII is used you are limited to 1G only while if
2500Base-X was set you are limited to 2.5G only.

Populating the possible_interfaces fixes this.

Changes in v2:
* Get rid of the if/else by Russels suggestion in the helper
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently QCA808x driver does not fill the possible_interfaces.
2.5G QCA808x support SGMII and 2500Base-X while 1G model only supports
SGMII, so fill the possible_interfaces accordingly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are 2 versions of QCA808x, one 2.5G capable and one 1G capable.
Currently, this matter only in the .get_features call however, it will
be required for filling supported interface modes so lets add a helper
that can be reused.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to wrap calls to the no_printk() helper inside an
always-false check, as no_printk() already does that internally.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
ipv6: lockless accesses to devconf

- First patch puts in a cacheline_group the fields used in fast paths.

- Annotate all data races around idev->cnf fields.

- Last patch in this series removes RTNL use for RTM_GETNETCONF dumps.

v3: addressed Jakub Kicinski feedback in addrconf_disable_ipv6()
    Added tags from Jiri and Florian.

v2: addressed Jiri Pirko feedback
 - Added "ipv6: addrconf_disable_ipv6() optimizations"
   and "ipv6: addrconf_disable_policy() optimization"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

1) inet6_netconf_dump_devconf() can run under RCU protection
   instead of RTNL.

2) properly return 0 at the end of a dump, avoiding an
   an extra recvmsg() system call.

3) Do not use inet6_base_seq() anymore, for_each_netdev_dump()
   has nice properties. Restarting a GETDEVCONF dump if a device has
   been added/removed or if net->ipv6.dev_addr_genid has changed is moot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Final (?) round of this series.

Annotate lockless reads on following devconf fields,
because they be changed concurrently from /proc/net/ipv6/conf.

- accept_dad
- optimistic_dad
- use_optimistic
- use_oif_addrs_only
- ra_honor_pio_life
- keep_addr_on_down
- ndisc_notify
- ndisc_evict_nocarrier
- suppress_frag_ndisc
- addr_gen_mode
- seg6_enabled
- ioam6_enabled
- ioam6_id
- ioam6_id_wide
- drop_unicast_in_l2_multicast
- mldv[12]_unsolicited_report_interval
- force_mld_version
- force_tllao
- accept_untracked_na
- drop_unsolicited_na
- accept_source_route
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Annotate lockless reads and writes on following devconf fields:

- regen_min_advance
- regen_max_retry
- dad_transmits
- use_tempaddr
- max_addresses
- max_desync_factor
- temp_valid_lft
- rtr_solicits
- rtr_solicit_max_interval
- rtr_solicit_interval
- rtr_solicit_delay
- enhanced_dad
- accept_redirects
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Writing over /proc/sys/net/ipv6/conf/default/disable_policy
does not need to hold RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

idev->cnf.disable_policy and net->ipv6.devconf_all->disable_policy
can be read locklessly. Add appropriate annotations on reads
and writes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devconf->proxy_ndp can be read and written locklessly,
add appropriate annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use READ_ONCE() while reading idev->cnf.rtr_probe_interval
while its value could be changed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

idev->cnf.ignore_routes_with_linkdown can be used without any locks,
add appropriate annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Annotate reads from in6_dev->cnf.XXX fields, as they could
change concurrently.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

idev->cnf.forwarding and net->ipv6.devconf_all->forwarding
might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

idev->cnf.hop_limit and net->ipv6.devconf_all->hop_limit
might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Florian Westphal <fw@strlen.de> # for netfilter parts
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

idev->cnf.mtu6 might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Writing over /proc/sys/net/ipv6/conf/default/disable_ipv6
does not need to hold RTNL.

v3: remove a wrong change (Jakub Kicinski feedback)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

disable_ipv6 is read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.

v2: do not preload net before rtnl_trylock() in
    addrconf_disable_ipv6() (Jiri)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 TX and RX fast path use the following fields:

- disable_ipv6
- hop_limit
- mtu6
- forwarding
- disable_policy
- proxy_ndp

Place them in a group to increase data locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.

Conflicts:

net/mptcp/protocol.c
  adf1bb78 ("mptcp: fix snd_wnd initialization for passive socket")
  9426ce47 ("mptcp: annotate lockless access for RX path fields")
https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/

Adjacent changes:

drivers/dpll/dpll_core.c
  0d60d8df ("dpll: rely on rcu for netdev_dpll_pin()")
  e7f8df0e ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order")

drivers/net/veth.c
  1ce7d306 ("veth: try harder when allocating queue memory")
  0bef5120 ("net: add netdev_lockdep_set_classes() to virtual drivers")

drivers/net/wireless/intel/iwlwifi/mvm/d3.c
  8c9bef26 ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
  78f65fbf ("wifi: iwlwifi: mvm: ensure offloading TID queue exists")

net/wireless/nl80211.c
  f78c1375 ("wifi: nl80211: reject iftype change with mesh ID change")
  414532d8 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, WiFi and netfilter.

  We have one outstanding issue with the stmmac driver, which may be a
  LOCKDEP false positive, not a blocker.

  Current release - regressions:

   - netfilter: nf_tables: re-allow NFPROTO_INET in
     nft_(match/target)_validate()

   - eth: ionic: fix error handling in PCI reset code

  Current release - new code bugs:

   - eth: stmmac: complete meta data only when enabled, fix null-deref

   - kunit: fix again checksum tests on big endian CPUs

  Previous releases - regressions:

   - veth: try harder when allocating queue memory

   - Bluetooth:
      - hci_bcm4377: do not mark valid bd_addr as invalid
      - hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST

  Previous releases - always broken:

   - info leak in __skb_datagram_iter() on netlink socket

   - mptcp:
      - map v4 address to v6 when destroying subflow
      - fix potential wake-up event loss due to sndbuf auto-tuning
      - fix double-free on socket dismantle

   - wifi: nl80211: reject iftype change with mesh ID change

   - fix small out-of-bound read when validating netlink be16/32 types

   - rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

   - ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()

   - ip_tunnel: prevent perpetual headroom growth with huge number of
     tunnels on top of each other

   - mctp: fix skb leaks on error paths of mctp_local_output()

   - eth: ice: fixes for DPLL state reporting

   - dpll: rely on rcu for netdev_dpll_pin() to prevent UaF

   - eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
     tree"

* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  dpll: fix build failure due to rcu_dereference_check() on unknown type
  kunit: Fix again checksum tests on big endian CPUs
  tls: fix use-after-free on failed backlog decryption
  tls: separate no-async decryption request handling from async
  tls: fix peeking with sync+async decryption
  tls: decrement decrypt_pending if no async completion will be called
  gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
  net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
  igb: extend PTP timestamp adjustments to i211
  rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
  tools: ynl: fix handling of multiple mcast groups
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  ...

Pull Landlock fix from Mickaël Salaün:
 "Fix a potential issue when handling inodes with inconsistent
  properties"

* tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Fix asymmetric private inodes referring

Tasmiya reports that their compiler complains that we deref
a pointer to unknown type with rcu_dereference_rtnl():

include/linux/rcupdate.h:439:9: error: dereferencing pointer to incomplete type ‘struct dpll_pin’

Unclear what compiler it is, at the moment, and we can't report
but since DPLL can't be a module - move the code from the header
into the source file.

Fixes: 0d60d8df ("dpll: rely on rcu for netdev_dpll_pin()")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Link: https://lore.kernel.org/all/3fcf3a2c-1c1b-42c1-bacb-78fdcd700389@linux.vnet.ibm.com/Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240229190515.2740221-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b38460bc ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cb ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.

So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cb ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - mgmt: Fix limited discoverable off timeout
 - hci_qca: Set BDA quirk bit if fwnode exists in DT
 - hci_bcm4377: do not mark valid bd_addr as invalid
 - hci_sync: Check the correct flag before starting a scan
 - Enforce validation on max value of connection interval
 - hci_sync: Fix accept_list when attempting to suspend
 - hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
 - Avoid potential use-after-free in hci_error_reset
 - rfcomm: Fix null-ptr-deref in rfcomm_check_security
 - hci_event: Fix wrongly recorded wakeup BD_ADDR
 - qca: Fix wrong event type for patch config command
 - qca: Fix triggering coredump implementation

* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
  Bluetooth: hci_sync: Fix accept_list when attempting to suspend
  Bluetooth: Avoid potential use-after-free in hci_error_reset
  Bluetooth: hci_sync: Check the correct flag before starting a scan
  Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================

Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sabrina Dubroca says:

====================
tls: a few more fixes for async decrypt

The previous patchset [1] took care of "full async". This adds a few
fixes for cases where only part of the crypto operations go the async
route, found by extending my previous debug patch [2] to do N
synchronous operations followed by M asynchronous ops (with N and M
configurable).

[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=823784&state=*
[2] https://lore.kernel.org/all/9d664093b1bf7f47497b2c40b3a085b45f3274a2.1694021240.git.sd@queasysnail.net/
====================

Link: https://lore.kernel.org/r/cover.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>