- 08 Dec, 2020 21 commits
-
-
Nathan Lynch authored
There are no users left of the suspend_disable_cpu() callback, remove it. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201207215200.1785968-21-nathanl@linux.ibm.com
-
Nathan Lynch authored
Since commit 48f6e7f6 ("powerpc/pseries: remove cede offline state for CPUs"), ppc_md.suspend_disable_cpu() is no longer used and all CPUs (save one) are placed into true offline state as opposed to H_JOIN. So pseries_suspend_cpu() is effectively unused; remove it. Signed-off-by:
-
Nathan Lynch authored
There is no need for the stream id to be a file-global variable; pass it from hibernate_store() to pseries_suspend_begin() for the H_VASI_STATE call. Signed-off-by:
-
Nathan Lynch authored
There are three ways pseries_suspend_begin() can be reached: 1. When "mem" is written to /sys/power/state: kobj_attr_store() -> state_store() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This never works because there is no way to supply a valid stream id using this interface, and H_VASI_STATE is called with a stream id of zero. So this call path is useless at best. 2. When a stream id is written to /sys/devices/system/power/hibernate. pseries_suspend_begin() is polled directly from store_hibernate() until the stream is in the "Suspending" state (i.e. the platform is ready for the OS to suspend execution): dev_attr_store() -> store_hibernate() -> pseries_suspend_begin() 3. When a stream id is written to /sys/devices/system/power/hibernate (continued). After #2, pseries_suspend_begin() is called once again from the pm core: dev_attr_store() -> store_hibernate() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This is redundant because the VASI suspend state is already known to be Suspending. The begin() callback of platform_suspend_ops is optional, so we can simply remove that assignment with no loss of function. Fixes: 32d8ad4e ("powerpc/pseries: Partition hibernation support") Signed-off-by: -
Nathan Lynch authored
rtas_ibm_suspend_me_unsafe() is now unused; remove it and rtas_percpu_suspend_me() which becomes unused as a result. Signed-off-by:
-
Nathan Lynch authored
sys_rtas() cannot call ibm,suspend-me directly in the same way it handles other inputs. Instead it must dispatch the request to code that can first perform the H_JOIN sequence before any call to ibm,suspend-me can succeed. Over time kernel/rtas.c has accreted a fair amount of platform-specific code to implement this. Since a different, more robust implementation of the suspend sequence is now in the pseries platform code, we want to dispatch the request there. Note that invoking ibm,suspend-me via the RTAS syscall is all but deprecated; this change preserves ABI compatibility for old programs while providing to them the benefit of the new partition suspend implementation. This is a behavior change in that the kernel performs the device tree update and firmware activation before returning, but experimentation indicates this is tolerated fine by legacy user space. Signed-off-by:
-
Nathan Lynch authored
This is a mitigation for the relatively rare occurrence where a virtual IOA can be in a transient state that prevents the suspend/migration from succeeding, resulting in an error from ibm,suspend-me. If the join/suspend sequence returns an error, it is acceptable to retry as long as the VASI suspend session state is still "Suspending" (i.e. the platform is still waiting for the OS to suspend). Retry a few times on suspend failure while this condition holds, progressively increasing the delay between attempts. We don't want to retry indefinitey because firmware emits an error log event on each unsuccessful attempt. Signed-off-by:
-
Nathan Lynch authored
If we're returning an error to user space, use H_VASI_SIGNAL to send a cancellation request to the platform. This isn't strictly required but it communicates that Linux will not attempt to complete the suspend, which allows the various entities involved to promptly end the operation in progress. Signed-off-by:
-
Nathan Lynch authored
The partition suspend sequence as specified in the platform architecture requires that all active processor threads call H_JOIN, which: - suspends the calling thread until it is the target of an H_PROD; or - immediately returns H_CONTINUE, if the calling thread is the last to call H_JOIN. This thread is expected to call ibm,suspend-me to completely suspend the partition. Upon returning from ibm,suspend-me the calling thread must wake all others using H_PROD. rtas_ibm_suspend_me_unsafe() uses on_each_cpu() to implement this protocol, but because of its synchronizing nature this is susceptible to deadlock versus users of stop_machine() or other callers of on_each_cpu(). Not only is stop_machine() intended for use cases like this, it handles error propagation and allows us to keep the data shared between CPUs minimal: a single atomic counter which ensures exactly one CPU will wake the others from their joined states. Switch the migration code to use stop_machine() and a less complex local implementation of the H_JOIN/ibm,suspend-me logic, which carries additional benefits: - more informative error reporting, appropriately ratelimited - resets the lockup detector / watchdog on resume to prevent lockup warnings when the OS has been suspended for a time exceeding the threshold. Fixes: 91dc182c ("[PATCH] powerpc: special-case ibm,suspend-me RTAS call") Signed-off-by:
-
Nathan Lynch authored
The behavior of rtas_ibm_suspend_me_unsafe() is to return -EAGAIN to the caller until the specified VASI suspend session state makes the transition from H_VASI_ENABLED to H_VASI_SUSPENDING. In the interest of separating concerns to prepare for a new implementation of the join/suspend sequence, extract VASI session polling logic into a couple of local functions. Waiting for the session state to reach H_VASI_SUSPENDING before calling rtas_ibm_suspend_me_unsafe() ensures that we will never get an EAGAIN result necessitating a retry. No user-visible change in behavior is intended. Signed-off-by:
-
Nathan Lynch authored
It's incorrect to abort post-suspend processing if ibm,activate-firmware isn't available. Use rtas_activate_firmware(), which logs this condition appropriately and allows us to proceed. Signed-off-by:
-
Nathan Lynch authored
- Convert printk(KERN_ERR) to pr_err(). - Include errno in property update failure message. - Remove reference to "Post-mobility" from device tree update message: with pr_err() it will have a "mobility:" prefix. Signed-off-by:
-
Nathan Lynch authored
update_dt_node() has a switch statement where the default case lacks a break statement. Signed-off-by:
-
Nathan Lynch authored
Treat the absence of the ibm,update-nodes function as benign instead of reporting an error. If the platform does not provide that facility, it's not a problem for Linux. Signed-off-by:
-
Nathan Lynch authored
H_VASI_SIGNAL can be used by a partition to request cancellation of its migration. To be used in future changes. Signed-off-by:
-
Nathan Lynch authored
Provide a documented wrapper function for the ibm,activate-firmware service, which must be called after a partition migration or hibernation. If the function is absent or the call fails, the OS will continue to run normally with the current firmware, so there is no need to perform any recovery. Just log it and continue. Signed-off-by:
-
Nathan Lynch authored
Now that the name is available, provide a simple wrapper for ibm,suspend-me which returns both a Linux errno and optionally the actual RTAS status to the caller. Signed-off-by:
-
Nathan Lynch authored
The pseries partition suspend sequence requires that all active CPUs call H_JOIN, which suspends all but one of them with interrupts disabled. The "chosen" CPU is then to call ibm,suspend-me to complete the suspend. Upon returning from ibm,suspend-me, the chosen CPU is to use H_PROD to wake the joined CPUs. Using on_each_cpu() for this, as rtas_ibm_suspend_me() does to implement partition migration, is susceptible to deadlock with other users of on_each_cpu() and with users of stop_machine APIs. The callback passed to on_each_cpu() is not allowed to synchronize with other CPUs in the way it is used here. Complicating the fix is the fact that rtas_ibm_suspend_me() also occupies the function name that should be used to provide a more conventional wrapper for ibm,suspend-me. Rename rtas_ibm_suspend_me() to rtas_ibm_suspend_me_unsafe() to free up the name and indicate that it should not gain users. Signed-off-by:
-
Nathan Lynch authored
We don't completely account for the possible return codes for ibm,suspend-me. Add definitions for these. Signed-off-by:
-
Nathan Lynch authored
While drmgr has had work in some areas to make its RTAS syscall interactions endian-neutral, its code for performing partition migration via the syscall has never worked on LE. While it is able to complete ibm,suspend-me successfully, it crashes when attempting the subsequent ibm,update-nodes call. drmgr is the only known (or plausible) user of ibm,suspend-me, ibm,update-nodes, and ibm,update-properties, so allow them only in big-endian configurations. Signed-off-by:
-
Aneesh Kumar K.V authored
This partially reverts commit eb232b16 ("powerpc/book3s64/kuap: Improve error reporting with KUAP") and update the fault handler to print [ 55.022514] Kernel attempted to access user page (7e6725b70000) - exploit attempt? (uid: 0) [ 55.022528] BUG: Unable to handle kernel data access on read at 0x7e6725b70000 [ 55.022533] Faulting instruction address: 0xc000000000e8b9bc [ 55.022540] Oops: Kernel access of bad area, sig: 11 [#1] .... when the kernel access userspace address without unlocking AMR. bad_kuap_fault() is added as part of commit 5e5be3ae ("powerpc/mm: Detect bad KUAP faults") to catch userspace access incorrectly blocked by AMR. Hence retain the full stack dump there even with hash translation. Also, add a comment explaining the difference between hash and radix. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
- 07 Dec, 2020 2 commits
-
-
Jordan Niethe authored
On Power9, CIABR is lost after idle. This means that instruction breakpoints set by xmon which use CIABR do not work. Fix this by restoring CIABR after idle. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Jordan Niethe authored
The value in CIABR persists across kexec which can lead to unintended results when the new kernel hits the old kernel's breakpoint. For example: 0:mon> bi $loadavg_proc_show 0:mon> b type address 1 inst c000000000519060 loadavg_proc_show+0x0/0x130 0:mon> x $ kexec -l /mnt/vmlinux --initrd=/mnt/rootfs.cpio.gz --append='xmon=off' $ kexec -e $ cat /proc/loadavg Trace/breakpoint trap Make sure CIABR is cleared so this does not happen. Signed-off-by:
-
- 05 Dec, 2020 2 commits
-
-
Christophe Leroy authored
ppc601 and e200 were the users of ucache_bsize. ppc601 and e200 are now gone. Remove ucache_bsize. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
There is no defconfig selecting CONFIG_E200, and no platform. e200 is an earlier version of booke, a predecessor of e500, with some particularities like an unified cache instead of both an instruction cache and a data cache. Remove it. Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
- 04 Dec, 2020 4 commits
-
-
Christophe Leroy authored
In several places, inline assembly uses the "%Un" modifier to enable the use of instruction with update form addressing, but the associated "<>" constraint is missing. As mentioned in previous patch, this fails with gcc 4.9, so "<>" can't be used directly. Use UPD_CONSTR macro everywhere %Un modifier is used. Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Mathieu Desnoyers authored
The placeholder for instruction selection should use the second argument's operand, which is %1, not %0. This could generate incorrect assembly code if the memory addressing of operand %0 is a different form from that of operand %1. Also remove the %Un placeholder because having %Un placeholders for two operands which are based on the same local var (ptep) doesn't make much sense. By the way, it doesn't change the current behaviour because "<>" constraint is missing for the associated "=m". [chleroy: revised commit log iaw segher's comments and removed %U0] Fixes: 9bf2b5cd ("powerpc: Fixes for CONFIG_PTE_64BIT for SMP support") Cc: <stable@vger.kernel.org> # v2.6.28+ Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Christophe Leroy authored
Since some time now, printk() adds carriage return, leading to unusable xmon output if there is no udbg backend available: [ 54.288722] sysrq: Entering xmon [ 54.292209] Vector: 0 at [cace3d2c] [ 54.292274] pc: [ 54.292331] c0023650 [ 54.292468] : xmon+0x28/0x58 [ 54.292519] [ 54.292574] lr: [ 54.292630] c0023724 [ 54.292749] : sysrq_handle_xmon+0xa4/0xfc [ 54.292801] [ 54.292867] sp: cace3de8 [ 54.292931] msr: 9032 [ 54.292999] current = 0xc28d0000 [ 54.293072] pid = 377, comm = sh [ 54.293157] Linux version 5.10.0-rc6-s3k-dev-01364-gedf13f0ccd76-dirty (root@po17688vm.idsi0.si.c-s.fr) (powerpc64-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34) #4211 PREEMPT Fri Dec 4 09:32:11 UTC 2020 [ 54.293287] enter ? for help [ 54.293470] [cace3de8] [ 54.293532] c0023724 [ 54.293654] sysrq_handle_xmon+0xa4/0xfc [ 54.293711] (unreliable) ... [ 54.296002] [ 54.296159] --- Exception: c01 (System Call) at [ 54.296217] 0fd4e784 [ 54.296303] [ 54.296375] SP (7fca6ff0) is in userspace [ 54.296431] mon> [ 54.296484] <no input ...> Use pr_cont() instead. Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
-
Alexey Kardashevskiy authored
We execute certain NPU2 setup code (such as mapping an LPID to a device in NPU2) unconditionally if an Nvlink bridge is detected. However this cannot succeed on POWER8NVL machines and errors appear in dmesg. This is harmless as skiboot returns an error and the only place we check it is vfio-pci but that code does not get called on P8+ either. This adds a check if pnv_npu2_xxx helpers are called on a machine with NPU2 which initializes pnv_phb::npu in pnv_npu2_init(); pnv_phb::npu==NULL on POWER8/NVL (Naples). While at this, fix NULL derefencing in pnv_npu_peers_take_ownership/ pnv_npu_peers_release_ownership which occurs when GPUs on mentioned P8s cause EEH which happens if "vfio-pci" disables devices using the D3 power state; the vfio-pci's disable_idle_d3 module parameter controls this and must be set on Naples. The EEH handling clears the entire pnv_ioda_pe struct in pnv_ioda_free_pe() hence the NULL derefencing. We cannot recover from that but at least we stop crashing. Tested on - POWER9 pvr=004e1201, Ubuntu 19.04 host, Ubuntu 18.04 vm, NVIDIA GV100 10de:1db1 driver 418.39 - POWER8 pvr=004c0100, RHEL 7.6 host, Ubuntu 16.10 vm, NVIDIA P100 10de:15f9 driver 396.47 Fixes: 1b785611 ("powerpc/powernv/npu: Add release_ownership hook") Cc: stable@vger.kernel.org # 5.0 Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 03 Dec, 2020 11 commits
-
-
Ganesh Goudar authored
To check machine check handling, add support to inject slb multihit errors. Co-developed-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> [mpe: Use CONFIG_PPC_BOOK3S_64 to fix compile errors reported by lkp@intel.com] Signed-off-by:
-
Oliver O'Halloran authored
If the platform decides to block enabling the device nothing is printed currently. This can lead to some confusion since the dmesg output will usually print an error with no context e.g. e1000e: probe of 0022:01:00.0 failed with error -22 This shouldn't be spammy since pci_enable_device() already prints a messages when it succeeds. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed. This problem can be fixed by adding the corresponding unmap operation when the device is removed. There's no pcibios_* hook for the remove case, but the same effect can be achieved using a bus notifier. Because INTx are shared among PHBs (and potentially across the system), this adds tracking of virq to unmap them only when the last user is gone. [aik: added refcounter] Signed-off-by:
Cédric Le Goater <clg@kaod.org> Reviewed-by:
Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by:
-
Daniel Axtens authored
It's sometimes handy to have a config that boots a bit like a system under secure boot (forcing lockdown=integrity, without needing any extra stuff like a command line option). This config file allows that, and also turns on a few assorted security and hardening options for good measure. Suggested-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Christophe Leroy authored
440/460 variants and 470 variants are not compatible, no need to make code supporting both and using MMU features. Just use CONFIG_PPC_47x to decide what to build. Signed-off-by:
-
Christophe Leroy authored
As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not compatible with 440 and 460 variants. This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different for 47x, meaning a kernel built for 47x will not run correctly on a 440. In cputable, opt out all 440 and 460 variants when CONFIG_PPC_47x is set. Also add a default match dedicated to 470. Signed-off-by:
-
Christophe Leroy authored
CPU_FTR_NODSISRALIGN has not been used since commit 31bfdb03 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Remove it. Signed-off-by:
-
Christophe Leroy authored
MMU_FTR_PPCAS_ARCH_V2 is defined in cpu_table.h as MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE. MMU_FTR_TLBIEL and MMU_FTR_16M_PAGE are defined in mmu.h MMU_FTR_PPCAS_ARCH_V2 is used only in mmu.h and it is used only once. Remove MMU_FTR_PPCAS_ARCH_V2 and use directly MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE Signed-off-by:
-
Christophe Leroy authored
Only mpc83xx will set MMU_FTR_NEED_DTLB_SW_LRU and its definition is enclosed in #ifdef CONFIG_PPC_83xx. Make MMU_FTR_NEED_DTLB_SW_LRU possible only when CONFIG_PPC_83xx is set. Signed-off-by:
-
Christophe Leroy authored
Since commit 10b35d99 ("[PATCH] powerpc: merged asm/cputable.h"), CPU_FTR_COHERENT_ICACHE has always been defined. Remove the #ifndef CPU_FTR_COHERENT_ICACHE block. Signed-off-by:
-
Christophe Leroy authored
G2_LE has a 603 core, add CPU_FTR_NOEXECUTE. Fixes: 385e89d5 ("powerpc/mm: add exec protection on powerpc 603") Cc: stable@vger.kernel.org Signed-off-by:
-
