Avoid the problem that some variables(headroom and so on) will repeat
the calculation when process xdp.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the case of XDP-PASS, skb_reserve uses the "delta" to compatible
non-XDP, now that is not shared between xdp and non-xdp, so we can
remove this logic.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of this patch is to simplify the receive_small().
Separate all the logic of XDP of small into a function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now, the logic of merge xdp process is simple, we can remove the
skip_xdp.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of this patch is to simplify the receive_mergeable().
Separate all the logic of XDP into a function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtnet_build_xdp_buff_mrg() auto release xdp shinfo then the caller no
need to careful the xdp shinfo.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch introduce a new function that frees the rest mergeable buf.
The subsequent patch will reuse this function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch introduce a new function that releases the
xdp shinfo. The subsequent patch will reuse this function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

At present, we have two similar logic to perform the XDP prog.

Therefore, this patch separates the code of executing XDP, which is
conducive to later maintenance.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The previous patch, in order to facilitate review, I do not do any
modification. This patch has made some optimization on the top.

* remove some repeated logics in this function.
* add fast check for passing without any alloc.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Separating the logic of preparation for xdp from receive_mergeable.

The purpose of this is to simplify the logic of execution of XDP.

The main logic here is that when headroom is insufficient, we need to
allocate a new page and calculate offset. It should be noted that if
there is new page, the variable page will refer to the new page.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the xdp implementation of virtio-net mergeable, it always checks
whether two page is used and a page is selected to release. This is
complicated for the processing of action, and be careful.

In the entire process, we have such principles:
* If xdp_page is used (PASS, TX, Redirect), then we release the old
  page.
* If it is a drop case, we will release two. The old page obtained from
  buf is release inside err_xdp, and xdp_page needs be relased by us.

But in fact, when we allocate a new page, we can release the old page
immediately. Then just one is using, we just need to release the new
page for drop case. On the drop path, err_xdp will release the variable
"page", so we only need to let "page" point to the new xdp_page in
advance.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit c9929f0e ("mm/slob: remove CONFIG_SLOB") removes CONFIG_SLOB.
Now, we can also remove special handling for socket buffers with the SLOB
allocator. The code with HAVE_SKB_SMALL_HEAD_CACHE=1 is now the default
behavior for all allocators.

Remove an unnecessary distinction between SLOB and SLAB/SLUB allocator
after the SLOB allocator is gone.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230509071207.28942-1-lukas.bulwahn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid reading link modes from management firmware every time when
`ethtool_get_link_ksettings` is called, only communicate with
management firmware when necessary like we do for eth_table info.

This change can ease the situation that when large number of vlan
sub-interfaces are created and their information is requested by
some monitoring process like PCP [1] through ethool ioctl frequently.

[1] https://pcp.ioSigned-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230509075817.10566-1-louis.peens@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The DP83869 PHY on TI's k3-am642-evm supports both MII and RGMII
interfaces and is configured by default to use RGMII interface (strap).
However, the board design allows switching dynamically to MII interface
for testing purposes by applying different set of pinmuxes.

To support switching to MII interface, update the DP83869 PHY driver to
configure OP_MODE_DECODE.RGMII_MII_SEL(bit 5) properly when MII PHY
interface mode is requested.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230508070359.357474-1-s-vadapalli@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - sched: act_pedit: free pedit keys on bail from offset check

  Current release - new code bugs:

   - pds_core:
      - Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
      - fix mutex double unlock in error path

  Previous releases - regressions:

   - sched: cls_api: remove block_cb from driver_list before freeing

   - nf_tables: fix ct untracked match breakage

   - eth: mtk_eth_soc: drop generic vlan rx offload

   - sched: flower: fix error handler on replace

  Previous releases - always broken:

   - tcp: fix skb_copy_ubufs() vs BIG TCP

   - ipv6: fix skb hash for some RST packets

   - af_packet: don't send zero-byte data in packet_sendmsg_spkt()

   - rxrpc: timeout handling fixes after moving client call connection
     to the I/O thread

   - ixgbe: fix panic during XDP_TX with > 64 CPUs

   - igc: RMW the SRRCTL register to prevent losing timestamp config

   - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621

   - r8152:
      - fix flow control issue of RTL8156A
      - fix the poor throughput for 2.5G devices
      - move setting r8153b_rx_agg_chg_indicate() to fix coalescing
      - enable autosuspend

   - ncsi: clear Tx enable mode when handling a Config required AEN

   - octeontx2-pf: macsec: fixes for CN10KB ASIC rev

  Misc:

   - 9p: remove INET dependency"

* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
  pds_core: fix mutex double unlock in error path
  net/sched: flower: fix error handler on replace
  Revert "net/sched: flower: Fix wrong handle assignment during filter change"
  net/sched: flower: fix filter idr initialization
  net: fec: correct the counting of XDP sent frames
  bonding: add xdp_features support
  net: enetc: check the index of the SFI rather than the handle
  sfc: Add back mailing list
  virtio_net: suppress cpu stall when free_unused_bufs
  ice: block LAN in case of VF to VF offload
  net: dsa: mt7530: fix network connectivity with multiple CPU ports
  net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
  9p: Remove INET dependency
  netfilter: nf_tables: fix ct untracked match breakage
  af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
  igc: read before write to SRRCTL register
  pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
  pds_core: remove CONFIG_DEBUG_FS from makefile
  ionic: catch failure from devlink_alloc
  ...

Pull more i2c updates from Wolfram Sang:
 "Some more driver bugfixes and a DT binding conversion"

* tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  dt-bindings: i2c: brcm,kona-i2c: convert to YAML
  i2c: gxp: fix build failure without CONFIG_I2C_SLAVE
  i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks
  i2c: omap: Fix standard mode false ACK readings
  i2c: tegra: Fix PEC support for SMBUS block read

Commit 0da6e5fd ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.

As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.

Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's a fix which landed in net-next, pull it in along
with the couple of minor cleanups.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull devicetree fixes from Rob Herring:

 - Add Conor Dooley as a DT binding maintainer

 - Swap the order of parsing /memreserve/ and /reserved-memory nodes so
   that the /reserved-memory nodes which have more information are
   handled first

 - Fix some property dependencies in riscv,pmu binding

 - Update maintainers entries on a couple of bindings

* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: add Conor as a dt-bindings maintainer
  dt-bindings: perf: riscv,pmu: fix property dependencies
  dt-bindings: xilinx: Remove Naga from memory and mtd bindings
  of: fdt: Scan /memreserve/ last
  dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
  dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
  dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
  dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro

Pull more documentation updates from Jonathan Corbet:
 "A handful of late-arriving documentation fixes, plus one Spanish
  translation that has been ready for some time but got applied late"

* tag 'docs-6.4-2' of git://git.lwn.net/linux:
  docs/sp_SP: Add translation of process/adding-syscalls
  CREDITS: Update email address for Mat Martineau
  Documentation: update kernel stack for x86_64
  docs: Remove unnecessary unicode character
  docs: fix "Reviewd" typo
  Documentation: timers: hrtimers: Make hybrid union historical
  docs/admin-guide/mm/ksm.rst fix intraface -> interface typo
  doc:it_IT: fix some typos

Pull more tracing updates from Steven Rostedt:

 - Make buffer_percent read/write.

   The buffer_percent file is how users can state how long to block on
   the tracing buffer depending on how much is in the buffer. When it
   hits the "buffer_percent" it will wake the task waiting on the
   buffer. For some reason it was set to read-only.

   This was not noticed because testing was done as root without
   SELinux, but with SELinux it will prevent even root to write to it
   without having CAP_DAC_OVERRIDE.

 - The "touched_functions" was added this merge window, but one of the
   reasons for adding it was not implemented.

   That was to show what functions were not only touched, but had either
   a direct trampoline attached to it, or a kprobe or live kernel
   patching that can "hijack" the function to run a different function.
   The point is to know if there's functions in the kernel that may not
   be behaving as the kernel code shows. This can be used for debugging.

   TODO: Add this information to kernel oops too.

* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
  tracing: Fix permissions for the buffer_percent file

Pull locking updates from Ingo Molnar:

 - Introduce local{,64}_try_cmpxchg() - a slightly more optimal
   primitive, which will be used in perf events ring-buffer code

 - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation

 - Misc cleanups/fixes

* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: Correct (cmp)xchg() instrumentation
  locking/x86: Define arch_try_cmpxchg_local()
  locking/arch: Wire up local_try_cmpxchg()
  locking/generic: Wire up local{,64}_try_cmpxchg()
  locking/atomic: Add generic try_cmpxchg{,64}_local() support
  locking/rwbase: Mitigate indefinite writer starvation
  locking/arch: Rename all internal __xchg() names to __arch_xchg()

Merge my x86 uaccess updates branch.

The LAM ("Linear Address Masking") updates in this release made me
unhappy about how "access_ok()" was done, and it actually turned out to
have a couple of small bugs in it too.  This is my cleanup of the code:

 - use the sign bit of the __user pointer rather than masking the
   address and checking it against the TASK_SIZE range.

   We already did this part for the get/put_user() side, but
   'access_ok()' did the naïve "mask and range check" thing, which not
   only generates nasty code, but also ended up meaning that __access_ok
   itself didn't do a good job, and so copy_from_user_nmi() didn't get
   the check right.

 - move all the code that is 64-bit only into the 64-bit version of the
   header file, so that we don't unnecessarily pollute the shared x86
   code and make it look like LAM might work in 32-bit too.

 - fix a bug in the address masking (that doesn't end up mattering: in
   this case the fix was to just remove the buggy code entirely).

 - a couple of trivial cleanups and added commentary about the
   access_ok() rules.

* x86-uaccess-cleanup:
  x86-64: mm: clarify the 'positive addresses' user address rules
  x86: mm: remove 'sign' games from LAM untagged_addr*() macros
  x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header
  x86: mm: remove architecture-specific 'access_ok()' define
  x86-64: make access_ok() independent of LAM

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for hibernation

 - The .rela.dyn section has been moved to the init area

 - A fix for the SBI probing to allow for implementation-defined
   behavior

 - Various other fixes and cleanups throughout the tree

* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: include cpufeature.h in cpufeature.c
  riscv: Move .rela.dyn to the init sections
  dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
  riscv: compat_syscall_table: Fixup compile warning
  RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
  RISC-V: fix sifive and thead section mismatches in errata
  RISC-V: Align SBI probe implementation with spec
  riscv: mm: remove redundant parameter of create_fdt_early_page_table
  riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
  RISC-V: Add arch functions to support hibernation/suspend-to-disk
  RISC-V: mm: Enable huge page support to kernel_page_present() function
  RISC-V: Factor out common code of __cpu_resume_enter()
  RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function

Pull more kvm updates from Paolo Bonzini:
 "This includes the 6.4 changes for RISC-V, and a few bugfix patches for
  other architectures. For x86, this closes a longstanding performance
  issue in the newer and (usually) more scalable page table management
  code.

  RISC-V:
   - ONE_REG interface to enable/disable SBI extensions
   - Zbb extension for Guest/VM
   - AIA CSR virtualization

  x86:
   - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU
     can result in the root being freed even though the root is
     completely valid and can be reused as-is (with a TLB flush).

  s390:
   - A couple of bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix race in gmap_make_secure()
  KVM: s390: pv: fix asynchronous teardown for small VMs
  KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated
  RISC-V: KVM: Virtualize per-HART AIA CSRs
  RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask
  RISC-V: KVM: Add ONE_REG interface for AIA CSRs
  RISC-V: KVM: Implement subtype for CSR ONE_REG interface
  RISC-V: KVM: Initial skeletal support for AIA
  RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines
  RISC-V: Detect AIA CSRs from ISA string
  RISC-V: Add AIA related CSR defines
  RISC-V: KVM: Allow Zbb extension for Guest/VM
  RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions
  RISC-V: KVM: Alphabetize selects
  KVM: RISC-V: Retry fault if vma_lookup() results become invalid

Pull ACPI fix from Rafael Wysocki:
 "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during
  the 6.3 cycle, that turned out to do more harm than help (Hans de
  Goede)"

* tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530

Pull thermal control fixes from Rafael Wysocki:
 "These fix a NULL pointer dereference in the Intel powerclamp driver
  introduced during the 6.3 cycle and update MAINTAINERS to match recent
  code changes.

  Specifics:

   - Fix NULL pointer access in the Intel powerclamp thermal driver that
     occurs on attempts to set the cooling device state to 0 in the
     default configuration (Srinivas Pandruvada)

   - Drop the stale MAINTAINERS entry for the Intel Menlow thermal
     driver that has been removed recently (Lukas Bulwahn)"

* tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER
  thermal: intel: powerclamp: Fix NULL pointer access issue

Pull phy fixes from Vinod Koul:

 - Fix for mediatek driver warning for variable used uninitialized and
   for wrong pll math

* tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: mediatek: hdmi: mt8195: fix wrong pll calculus
  phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc

Pull more drm fixes from Dave Airlie:
 "This is the fixes for the last couple of weeks for i915 and last 3
  weeks for amdgpu, lots of them but pretty scattered around and all
  pretty small.

  amdgpu:
   - SR-IOV fixes
   - DCN 3.2 fixes
   - DC mclk handling fixes
   - eDP fixes
   - SubVP fixes
   - HDCP regression fix
   - DSC fixes
   - DC FP fixes
   - DCN 3.x fixes
   - Display flickering fix when switching between vram and gtt
   - Z8 power saving fix
   - Fix hang when skipping modeset
   - GPU reset fixes
   - Doorbell fix when resizing BARs
   - Fix spurious warnings in gmc
   - Locking fix for AMDGPU_SCHED IOCTL
   - SR-IOV fix
   - DCN 3.1.4 fix
   - DCN 3.2 fix
   - Fix job cleanup when CS is aborted

  i915:
   - skl pipe source size check
   - mtl transcoder mask fix
   - DSI power on sequence fix
   - GuC versioning corner case fix"

* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
  drm/amdgpu: drop redundant sched job cleanup when cs is aborted
  drm/amd/display: filter out invalid bits in pipe_fuses
  drm/amd/display: Change default Z8 watermark values
  drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
  drm/amdgpu: add a missing lock for AMDGPU_SCHED
  drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
  drm/amdgpu: Enable doorbell selfring after resize FB BAR
  drm/amdgpu: Use the default reset when loading or reloading the driver
  drm/amdgpu: Fix mode2 reset for sienna cichlid
  drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
  drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
  drm/i915/guc: Actually return an error if GuC version range check fails
  drm/amd/display: Lowering min Z8 residency time
  drm/amd/display: fix flickering caused by S/G mode
  drm/amd/display: Set min_width and min_height capability for DCN30
  drm/amd/display: Isolate remaining FPU code in DCN32
  drm/amd/display: Update bounding box values for DCN321
  drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
  ...

If a function had ever had IPMODIFY or DIRECT attached to it, where this
is how live kernel patching and BPF overrides work, mark them and display
an "M" in the enabled_functions and touched_functions files. This can be
used for debugging. If a function had been modified and later there's a bug
in the code related to that function, this can be used to know if the cause
is possibly from a live kernel patch or a BPF program that changed the
behavior of the code.

Also update the documentation on the enabled_functions and
touched_functions output, as it was missing direct callers and CALL_OPS.
And include this new modify attribute.

Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Commit 2b6a7409 ("thermal: intel: menlow: Get rid of this driver")
removes the driver drivers/thermal/intel/intel_menlow.c, but misses to
remove its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS.

Fixes: 2b6a7409 ("thermal: intel: menlow: Get rid of this driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Rob asked if I would be interested in helping with the dt-bindings
maintenance, and since I am a glutton for punishment I accepted.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230504-renderer-alive-1c01d431b2a7@spudSigned-off-by: Rob Herring <robh@kernel.org>

Merge tag 'kvm-s390-next-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

For 6.4

Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can
result in the root being freed even though the root is completely valid and
can be reused as-is (with a TLB flush).

KVM/riscv changes for 6.4

- ONE_REG interface to enable/disable SBI extensions
- Zbb extension for Guest/VM
- AIA CSR virtualization

The call to phy_stop() races with the later call to phy_disconnect(),
resulting in concurrent phy_suspend() calls being run from different
CPUs. The final call to phy_disconnect() ensures that the PHY is
stopped and suspended, too.

Fixes: c96e731c ("net: bcmgenet: connect and disconnect from the PHY state machine")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a double unlock in an error handling path by unlocking as soon as
the error is seen and removing unlocks in the error cleanup path.

Link: https://lore.kernel.org/kernel-janitors/209a09f6-5ec6-40c7-a5ec-6260d8f54d25@kili.mountain/
Fixes: 523847df ("pds_core: add devcmd device interfaces")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
Fixes for miss to tc action series

Changes V1 -> V2:

- Added new patch reverting Ivan's fix for the same issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of
new filter to idr is postponed until later in code since handle is already
provided by the user. However, the error handling code in fl_change()
always assumes that the new filter had been inserted into idr. If error
handler is reached when replacing existing filter it may remove it from idr
therefore making it unreachable for delete or dump afterwards. Fix the
issue by verifying that 'fold' argument wasn't provided by caller before
calling idr_remove().

Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>