Skip to content

L
linux
Switch branch/tag
  1. 14 Apr, 2022 8 commits
    • Jianglei Nie's avatar
      ice: Fix memory leak in ice_get_orom_civd_data() · 7c8881b7
      Jianglei Nie authored 
      A memory chunk was allocated for orom_data in ice_get_orom_civd_data()
by vzmalloc(). But when ice_read_flash_module() fails, the allocated
memory is not freed, which will lead to a memory leak.

We can fix it by freeing the orom_data when ce_read_flash_module() fails.

Fixes: af18d886 ("ice: reduce time to read Option ROM CIVD data")
Signed-off-by: default avatarJianglei Nie <niejianglei2021@163.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      7c8881b7
    • Wojciech Drewek's avatar
      ice: fix crash in switchdev mode · d2016651
      Wojciech Drewek authored 
      Below steps end up with crash:
- modprobe ice
- devlink dev eswitch set $PF1_PCI mode switchdev
- echo 64 > /sys/class/net/$PF1/device/sriov_numvfs
- rmmod ice

Calling ice_eswitch_port_start_xmit while the process of removing
VFs is in progress ends up with NULL pointer dereference.
That's because PR netdev is not released but some resources
are already freed. Fix it by checking if ICE_VF_DIS bit is set.

Call trace:
[ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 1379.595284] #PF: supervisor read access in kernel mode
[ 1379.595410] #PF: error_code(0x0000) - not-present page
[ 1379.595535] PGD 0 P4D 0
[ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI
[ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G           OE     5.17.0-rc8_mrq_dev-queue+ #12
[ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019
[ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice]
[ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00
[ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246
[ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000
[ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000
[ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001
[ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000
[ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000
[ 1379.597237] FS:  00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000
[ 1379.597414] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0
[ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1379.598015] Call Trace:
[ 1379.598153]  <TASK>
[ 1379.598294]  dev_hard_start_xmit+0xd9/0x220
[ 1379.598444]  sch_direct_xmit+0x8a/0x340
[ 1379.598592]  __dev_queue_xmit+0xa3c/0xd30
[ 1379.598739]  ? packet_parse_headers+0xb4/0xf0
[ 1379.598890]  packet_sendmsg+0xa15/0x1620
[ 1379.599038]  ? __check_object_size+0x46/0x140
[ 1379.599186]  sock_sendmsg+0x5e/0x60
[ 1379.599330]  ____sys_sendmsg+0x22c/0x270
[ 1379.599474]  ? import_iovec+0x17/0x20
[ 1379.599622]  ? sendmsg_copy_msghdr+0x59/0x90
[ 1379.599771]  ___sys_sendmsg+0x81/0xc0
[ 1379.599917]  ? __pollwait+0xd0/0xd0
[ 1379.600061]  ? preempt_count_add+0x68/0xa0
[ 1379.600210]  ? _raw_write_lock_irq+0x1a/0x40
[ 1379.600369]  ? ep_done_scan+0xc9/0x110
[ 1379.600494]  ? _raw_spin_unlock_irqrestore+0x25/0x40
[ 1379.600622]  ? preempt_count_add+0x68/0xa0
[ 1379.600747]  ? _raw_spin_lock_irq+0x1a/0x40
[ 1379.600899]  ? __fget_light+0x8f/0x110
[ 1379.601024]  __sys_sendmsg+0x49/0x80
[ 1379.601148]  ? release_ds_buffers+0x50/0xe0
[ 1379.601274]  do_syscall_64+0x3b/0x90
[ 1379.601399]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1379.601525] RIP: 0033:0x7f72c1e2e35d

Fixes: f5396b8a ("ice: switchdev slow path")
Signed-off-by: default avatarWojciech Drewek <wojciech.drewek@intel.com>
Reported-by: default avatarMarcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: default avatarMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: default avatarSandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      d2016651
    • Maciej Fijalkowski's avatar
      ice: allow creating VFs for !CONFIG_NET_SWITCHDEV · aacca7a8
      Maciej Fijalkowski authored 
      Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to
create VFs properly as call to ice_eswitch_configure() returns
-EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on
CONFIG_NET_SWITCHDEV.

Change the ice_eswitch_configure() implementation for
!CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let
ice_ena_vfs() finish its work properly.

CC: Grzegorz Nitka <grzegorz.nitka@intel.com>
Fixes: 1a1c40df ("ice: set and release switchdev environment")
Signed-off-by: default avatarMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: default avatarMichal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      aacca7a8
    • Maciej Fijalkowski's avatar
      ice: xsk: check if Rx ring was filled up to the end · d1fc4c6f
      Maciej Fijalkowski authored 
      __ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be
allocated would cause the ring wrap. In that case, driver will issue two
calls to xsk_buff_alloc_batch() - one that will fill the ring up to the
end and the second one that will start with filling descriptors from the
beginning of the ring.

ice_fill_rx_descs() is a wrapper for taking care of what
xsk_buff_alloc_batch() gave back to the driver. It works in a best
effort approach, so for example when driver asks for 64 buffers,
ice_fill_rx_descs() could assign only 32. Such case needs to be checked
when ring is being filled up to the end, because in that situation ntu
might not reached the end of the ring.

Fix the ring wrap by checking if nb_buffs_extra has the expected value.
If not, bump ntu and go directly to tail update.

Fixes: 3876ff52 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often")
Signed-off-by: default avatarMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: default avatarMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: default avatarShwetha Nagaraju <Shwetha.nagaraju@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      d1fc4c6f
    • Jeremy Linton's avatar
      net: bcmgenet: Revert "Use stronger register read/writes to assure ordering" · 2df3fc4a
      Jeremy Linton authored 
      It turns out after digging deeper into this bug, that it was being
triggered by GCC12 failing to call the bcmgenet_enable_dma()
routine. Given that a gcc12 fix has been merged [1] and the genet
driver now works properly when built with gcc12, this commit should
be reverted.

[1]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57

Fixes: 8d3ea3d4 ("net: bcmgenet: Use stronger register read/writes to assure ordering")
Signed-off-by: default avatarJeremy Linton <jeremy.linton@arm.com>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      2df3fc4a
    • Petr Machata's avatar
      rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies · 23cfe941
      Petr Machata authored 
      When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns
size of 0, which is supposed to be an indication that the corresponding
attribute should not be emitted. However, instead, the current code
reserves a 0-byte attribute.

The reason this does not show up as a citation on a kasan kernel is that
netdev_offload_xstats_get(), which is supposed to fill in the data, never
ends up getting called, because rtnl_offload_xstats_get_stats() notices
that the stats are not actually used and skips the call.

Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a
response, confusing the userspace.

Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill().

Fixes: 0e7788fd ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats")
Signed-off-by: default avatarPetr Machata <petrm@nvidia.com>
Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/591b58e7623edc3eb66dd1fcfa8c8f133d090974.1649794741.git.petrm@nvidia.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      23cfe941
    • Vladimir Oltean's avatar
      net: dsa: felix: fix tagging protocol changes with multiple CPU ports · 00fa91bc
      Vladimir Oltean authored 
      When the device tree has 2 CPU ports defined, a single one is active
(has any dp->cpu_dp pointers point to it). Yet the second one is still a
CPU port, and DSA still calls ->change_tag_protocol on it.

On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the
active CPU port and port 5 is inactive.

After the following commands:

 # Initial setting
 cat /sys/class/net/eno2/dsa/tagging
 ocelot
 echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
 echo ocelot > /sys/class/net/eno2/dsa/tagging

traffic is now broken, because the driver has moved the NPI port from
port 4 to port 5, unbeknown to DSA.

The problem can be avoided by detecting that the second CPU port is
unused, and not doing anything for it. Further rework will be needed
when proper support for multiple CPU ports is added.

Treat this as a bug and prepare current kernels to work in single-CPU
mode with multiple-CPU DT blobs.

Fixes: adb3dccf ("net: dsa: felix: convert to the new .change_tag_protocol DSA API")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      00fa91bc
    • Antoine Tenart's avatar
      tun: annotate access to queue->trans_start · 968a1a5d
      Antoine Tenart authored 
      Commit 5337824f ("net: annotate accesses to queue->trans_start")
introduced a new helper, txq_trans_cond_update, to update
queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c
was missed, as it was introduced roughly at the same time.

Fixes: 5337824f ("net: annotate accesses to queue->trans_start")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: default avatarAntoine Tenart <atenart@kernel.org>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.orgSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      968a1a5d
  3. 13 Apr, 2022 7 commits
    • Lin Ma's avatar
      nfc: nci: add flush_workqueue to prevent uaf · ef27324e
      Lin Ma authored 
      Our detector found a concurrent use-after-free bug when detaching an
NCI device. The main reason for this bug is the unexpected scheduling
between the used delayed mechanism (timer and workqueue).

The race can be demonstrated below:

Thread-1                           Thread-2
                                 | nci_dev_up()
                                 |   nci_open_device()
                                 |     __nci_request(nci_reset_req)
                                 |       nci_send_cmd
                                 |         queue_work(cmd_work)
nci_unregister_device()          |
  nci_close_device()             | ...
    del_timer_sync(cmd_timer)[1] |
...                              | Worker
nci_free_device()                | nci_cmd_work()
  kfree(ndev)[3]                 |   mod_timer(cmd_timer)[2]

In short, the cleanup routine thought that the cmd_timer has already
been detached by [1] but the mod_timer can re-attach the timer [2], even
it is already released [3], resulting in UAF.

This UAF is easy to trigger, crash trace by POC is like below

[   66.703713] ==================================================================
[   66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490
[   66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33
[   66.703974]
[   66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5
[   66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work
[   66.703974] Call Trace:
[   66.703974]  <TASK>
[   66.703974]  dump_stack_lvl+0x57/0x7d
[   66.703974]  print_report.cold+0x5e/0x5db
[   66.703974]  ? enqueue_timer+0x448/0x490
[   66.703974]  kasan_report+0xbe/0x1c0
[   66.703974]  ? enqueue_timer+0x448/0x490
[   66.703974]  enqueue_timer+0x448/0x490
[   66.703974]  __mod_timer+0x5e6/0xb80
[   66.703974]  ? mark_held_locks+0x9e/0xe0
[   66.703974]  ? try_to_del_timer_sync+0xf0/0xf0
[   66.703974]  ? lockdep_hardirqs_on_prepare+0x17b/0x410
[   66.703974]  ? queue_work_on+0x61/0x80
[   66.703974]  ? lockdep_hardirqs_on+0xbf/0x130
[   66.703974]  process_one_work+0x8bb/0x1510
[   66.703974]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   66.703974]  ? pwq_dec_nr_in_flight+0x230/0x230
[   66.703974]  ? rwlock_bug.part.0+0x90/0x90
[   66.703974]  ? _raw_spin_lock_irq+0x41/0x50
[   66.703974]  worker_thread+0x575/0x1190
[   66.703974]  ? process_one_work+0x1510/0x1510
[   66.703974]  kthread+0x2a0/0x340
[   66.703974]  ? kthread_complete_and_exit+0x20/0x20
[   66.703974]  ret_from_fork+0x22/0x30
[   66.703974]  </TASK>
[   66.703974]
[   66.703974] Allocated by task 267:
[   66.703974]  kasan_save_stack+0x1e/0x40
[   66.703974]  __kasan_kmalloc+0x81/0xa0
[   66.703974]  nci_allocate_device+0xd3/0x390
[   66.703974]  nfcmrvl_nci_register_dev+0x183/0x2c0
[   66.703974]  nfcmrvl_nci_uart_open+0xf2/0x1dd
[   66.703974]  nci_uart_tty_ioctl+0x2c3/0x4a0
[   66.703974]  tty_ioctl+0x764/0x1310
[   66.703974]  __x64_sys_ioctl+0x122/0x190
[   66.703974]  do_syscall_64+0x3b/0x90
[   66.703974]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   66.703974]
[   66.703974] Freed by task 406:
[   66.703974]  kasan_save_stack+0x1e/0x40
[   66.703974]  kasan_set_track+0x21/0x30
[   66.703974]  kasan_set_free_info+0x20/0x30
[   66.703974]  __kasan_slab_free+0x108/0x170
[   66.703974]  kfree+0xb0/0x330
[   66.703974]  nfcmrvl_nci_unregister_dev+0x90/0xd0
[   66.703974]  nci_uart_tty_close+0xdf/0x180
[   66.703974]  tty_ldisc_kill+0x73/0x110
[   66.703974]  tty_ldisc_hangup+0x281/0x5b0
[   66.703974]  __tty_hangup.part.0+0x431/0x890
[   66.703974]  tty_release+0x3a8/0xc80
[   66.703974]  __fput+0x1f0/0x8c0
[   66.703974]  task_work_run+0xc9/0x170
[   66.703974]  exit_to_user_mode_prepare+0x194/0x1a0
[   66.703974]  syscall_exit_to_user_mode+0x19/0x50
[   66.703974]  do_syscall_64+0x48/0x90
[   66.703974]  entry_SYSCALL_64_after_hwframe+0x44/0xae

To fix the UAF, this patch adds flush_workqueue() to ensure the
nci_cmd_work is finished before the following del_timer_sync.
This combination will promise the timer is actually detached.

Fixes: 6a2968aa ("NFC: basic NCI protocol implementation")
Signed-off-by: default avatarLin Ma <linma@zju.edu.cn>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef27324e
    • Alvin Šipraga's avatar
      net: dsa: realtek: don't parse compatible string for RTL8366S · 8e925de6
      Alvin Šipraga authored 
      This switch is not even supported, but if someone were to actually put
this compatible string "realtek,rtl8366s" in their device tree, they
would be greeted with a kernel panic because the probe function would
dereference NULL. So let's just remove it.

Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/Signed-off-by: default avatarAlvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8e925de6
    • Alvin Šipraga's avatar
      net: dsa: realtek: fix Kconfig to assure consistent driver linkage · 2511e0c8
      Alvin Šipraga authored 
      The kernel test robot reported a build failure:

or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant'

... with the following build configuration:

CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=m

The problem here is that the realtek-smi interface driver gets built-in,
while the rtl8366rb switch subdriver gets built as a module, hence the
symbol rtl8366rb_variant is not reachable when defining the OF device
table in the interface driver.

The Kconfig dependencies don't help in this scenario because they just
say that the subdriver(s) depend on at least one interface driver. In
fact, the subdrivers don't depend on the interface drivers at all, and
can even be built even in their absence. Somewhat strangely, the
interface drivers can also be built in the absence of any subdriver,
BUT, if a subdriver IS enabled, then it must be reachable according to
the linkage of the interface driver: effectively what the IS_REACHABLE()
macro achieves. If it is not reachable, the above kind of linker error
will be observed.

Rather than papering over the above build error by simply using
IS_REACHABLE(), we can do a little better and admit that it is actually
the interface drivers that have a dependency on the subdrivers. So this
patch does exactly that. Specifically, we ensure that:

1. The interface drivers' Kconfig symbols must have a value no greater
   than the value of any subdriver Kconfig symbols.

2. The subdrivers should by default enable both interface drivers, since
   most users probably want at least one of them; those interface
   drivers can be explicitly disabled however.

What this doesn't do is prevent a user from building only a subdriver,
without any interface driver. To that end, add an additional line of
help in the menu to guide users in the right direction.

Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/Reported-by: default avatarkernel test robot <lkp@intel.com>
Fixes: aac94001 ("net: dsa: realtek: add new mdio interface for drivers")
Signed-off-by: default avatarAlvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2511e0c8
    • David S. Miller's avatar
      Merge tag 'wireless-2022-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless · dad32cfe
      David S. Miller authored 
      Kalle Valo says:

====================
wireless fixes for v5.18

First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dad32cfe
    • Dylan Hung's avatar
      net: ftgmac100: access hardware register after clock ready · 3d250452
      Dylan Hung authored 
      AST2600 MAC register 0x58 is writable only when the MAC clock is
enabled.  Usually, the MAC clock is enabled by the bootloader so
register 0x58 is set normally when the bootloader is involved.  To make
ast2600 ftgmac100 work without the bootloader, postpone the register
write until the clock is ready.

Fixes: 137d23ce ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue")
Signed-off-by: default avatarDylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3d250452
    • Vladimir Oltean's avatar
      Revert "net: dsa: setup master before ports" · 762c2998
      Vladimir Oltean authored 
      This reverts commit 11fd667d.

dsa_slave_change_mtu() updates the MTU of the DSA master and of the
associated CPU port, but only if it detects a change to the master MTU.

The blamed commit in the Fixes: tag below addressed a regression where
dsa_slave_change_mtu() would return early and not do anything due to
ds->ops->port_change_mtu() not being implemented.

However, that commit also had the effect that the master MTU got set up
to the correct value by dsa_master_setup(), but the associated CPU port's
MTU did not get updated. This causes breakage for drivers that rely on
the ->port_change_mtu() DSA call to account for the tagging overhead on
the CPU port, and don't set up the initial MTU during the setup phase.

Things actually worked before because they were in a fragile equilibrium
where dsa_slave_change_mtu() was called before dsa_master_setup() was.
So dsa_slave_change_mtu() could actually detect a change and update the
CPU port MTU too.

Restore the code to the way things used to work by reverting the reorder
of dsa_tree_setup_master() and dsa_tree_setup_ports(). That change did
not have a concrete motivation going for it anyway, it just looked
better.

Fixes: 066dfc42 ("Revert "net: dsa: stop updating master MTU from master.c"")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      762c2998
    • Martin Willi's avatar
      macvlan: Fix leaking skb in source mode with nodst option · e16b8598
      Martin Willi authored 
      The MACVLAN receive handler clones skbs to all matching source MACVLAN
interfaces, before it passes the packet along to match on destination
based MACVLANs.

When using the MACVLAN nodst mode, passing the packet to destination based
MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED.
However, the passed skb is not freed, leaking for any packet processed
with the nodst option.

Properly free the skb when consuming packets to fix that leak.

Fixes: 427f0c8c ("macvlan: Add nodst option to macvlan type source")
Signed-off-by: default avatarMartin Willi <martin@strongswan.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e16b8598
  5. 12 Apr, 2022 14 commits
  7. 11 Apr, 2022 9 commits
  9. 10 Apr, 2022 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7