- 10 Jun, 2019 5 commits
-
-
Thomas Falcon authored
The return values for these memory allocations are unchecked, which may cause an oops if the driver does not handle them after a failure. Fix by checking the function's return code. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
It was observed that multicast packets were no longer received after a device reset. The fix is to resend the current multicast list to the backing device after recovery. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
Check driver state before halting it during a reset. If the driver is not running, do nothing. Otherwise, a request to deactivate a down link can cause an error and the reset will fail. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-06-07 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.17 ('net/mlx5: Avoid reloading already removed devices') For -stable v5.0 ('net/mlx5e: Avoid detaching non-existing netdev under switchdev mode') For -stable v5.1 ('net/mlx5e: Fix source port matching in fdb peer flow rule') ('net/mlx5e: Support tagged tunnel over bond') ('net/mlx5e: Add ndo_set_feature for uplink representor') ('net/mlx5: Update pci error handler entries and command translation') ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.2-20190607' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-06-07 this is a pull reqeust of 9 patches for net/master. The first patch is by Alexander Dahl and removes a duplicate menu entry from the Kconfig. The next patch by Joakim Zhang fixes the timeout in the flexcan driver when setting small bit rates. Anssi Hannula's patch for the xilinx_can driver fixes the bittiming_const for CAN FD core. The two patches by Sean Nyekjaer bring mcp25625 to the existing mcp251x driver. The patch by Eugen Hristev implements an errata for the m_can driver. YueHaibing's patch fixes the error handling ing can_init(). The patch by Fabio Estevam for the flexcan driver removes an unneeded registration message during flexcan_probe(). And the last patch is by Willem de Bruijn and adds the missing purging the socket error queue on sock destruct. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 09 Jun, 2019 4 commits
-
-
George Wilkie authored
If you configure a route with multiple labels, e.g. ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4 A warning is logged: kernel: [ 130.561819] netlink: 'ip': attribute type 1 has an invalid length. This happens because mpls_iptunnel_policy has set the type of MPLS_IPTUNNEL_DST to fixed size NLA_U32. Change it to a minimum size. nla_get_labels() does the remaining validation. Fixes: e3e4712e ("mpls: ip tunnel support") Signed-off-by:
George Wilkie <gwilkie@vyatta.att-mail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Schmitz authored
[Resent to net instead of net-next - may clash with Anders Roxell's patch series addressing duplicate module names] Commit 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver") introduced a new PHY driver drivers/net/phy/asix.c that causes a module name conflict with a pre-existiting driver (drivers/net/usb/asix.c). The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded by that driver via its PHY ID. A rename of the driver looks unproblematic. Rename PHY driver to ax88796b.c in order to resolve name conflict. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Fixes: 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Before taking a refcount, make sure the object is not already scheduled for deletion. Same fix is needed in ipv6_flowlabel_opt() Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Enrico Weigelt authored
fix an uninitialized variable: CC net/ipv4/fib_semantics.o net/ipv4/fib_semantics.c: In function 'fib_check_nh_v4_gw': net/ipv4/fib_semantics.c:1027:12: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] if (!tbl || err) { ^~ Signed-off-by:
Enrico Weigelt <info@metux.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 07 Jun, 2019 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-06-07 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix several bugs in riscv64 JIT code emission which forgot to clear high 32-bits for alu32 ops, from Björn and Luke with selftests covering all relevant BPF alu ops from Björn and Jiong. 2) Two fixes for UDP BPF reuseport that avoid calling the program in case of __udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption that skb->data is pointing to transport header, from Martin. 3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog workqueue, and a missing restore of sk_write_space when psock gets dropped, from Jakub and John. 4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it breaks standard applications like DNS if reverse NAT is not performed upon receive, from Daniel. 5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6 fails to verify that the length of the tuple is long enough, from Lorenz. 6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for {un,}successful probe) as that is expected to be propagated as an fd to load_sk_storage_btf() and thus closing the wrong descriptor otherwise, from Michal. 7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir. 8) Minor misc fixes in docs, samples and selftests, from various others. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eli Britstein authored
Stacked devices like bond interface may have a VLAN device on top of them. Detect lag state correctly under this condition, and return the correct routed net device, according to it the encap header is built. Fixes: e32ee6c7 ("net/mlx5e: Support tunnel encap over tagged Ethernet") Signed-off-by:
Eli Britstein <elibr@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Alaa Hleihel authored
After introducing dedicated uplink representor, the netdev instance set over the esw manager vport (PF) became no longer in use, so it was removed in the cited commit once we're on switchdev mode. However, the mlx5e_detach function was not updated accordingly, and it still tries to detach a non-existing netdev, causing a kernel crash. This patch fixes this issue. Fixes: aec002f6 ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode") Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Raed Salem authored
The cited commit changed the initialization placement of the eswitch attributes so it is done prior to parse tc actions function call, including among others the in_rep and in_mdev fields which are mistakenly reassigned inside the parse actions function. This breaks the source port matching criteria of the peer redirect rule. Fix by removing the now redundant reassignment of the already initialized fields. Fixes: 988ab9c7 ("net/mlx5e: Introduce mlx5e_flow_esw_attr_init() helper") Signed-off-by:
Raed Salem <raeds@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Shay Agroskin authored
The TX queue index returned by the fallback function ranges between [0,NUM CHANNELS - 1] if QoS isn't set and [0, (NUM CHANNELS)*(NUM TCs) -1] otherwise. Our HW uses different TC mapping than the fallback function (which is denoted as 'up', user priority) so we only need to extract a channel number out of the returned value. Since (NUM CHANNELS)*(NUM TCs) is a relatively small number, using reciprocal scale almost always returns zero. We instead access the 'txq2sq' table to extract the sq (and with it the channel number) associated with the tx queue, thus getting a more evenly distributed channel number. Perf: Rx/Tx side with Intel(R) Xeon(R) Silver 4108 CPU @ 1.80GHz and ConnectX-5. Used 'iperf' UDP traffic, 10 threads, and priority 5. Before: 0.566Mpps After: 2.37Mpps As expected, releasing the existing bottleneck of steering all traffic to TX queue zero significantly improves transmission rates. Fixes: 7ccdd084 ("net/mlx5e: Fix select queue callback") Signed-off-by:
Shay Agroskin <shayag@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Chris Mi authored
After we have a dedicated uplink representor, the new netdev ops doesn't support ndo_set_feature. Because of that, we can't change some features, eg. rxvlan. Now add it back. In this patch, I also do a cleanup for the features flag handling, eg. remove duplicate NETIF_F_HW_TC flag setting. Fixes: aec002f6 ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode") Signed-off-by:
Chris Mi <chrism@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Alaa Hleihel authored
Prior to reloading a device we must first verify that it was not already removed. Otherwise, the attempt to remove the device will do nothing, and in that case we will end up proceeding with adding an new device that no one was expecting to remove, leaving behind used resources such as EQs that causes a failure to destroy comp EQs and syndrome (0x30f433). Fix that by making sure that we try to remove and add a device (based on a protocol) only if the device is already added. Fixes: c5447c70 ("net/mlx5: E-Switch, Reload IB interface when switching devlink modes") Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Edward Srouji authored
Add missing entries for create/destroy UCTX and UMEM commands. This could get us wrong "unknown FW command" error in flows where we unbind the device or reset the driver. Also the translation of these commands from opcodes to string was missing. Fixes: 6e3722ba ("IB/mlx5: Use the correct commands for UMEM and UCTX allocation") Signed-off-by:
Edward Srouji <edwards@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Willem de Bruijn authored
CAN supports software tx timestamps as of the below commit. Purge any queued timestamp packets on socket destroy. Fixes: 51f31cab ("ip: support for TX timestamps on UDP and RAW sockets") Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com Signed-off-by:
Willem de Bruijn <willemb@google.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Fabio Estevam authored
Currently the following message is observed when the flexcan driver is probed: flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=23) The reason for printing 'ptrval' is explained at Documentation/core-api/printk-formats.rst: "Pointers printed without a specifier extension (i.e unadorned %p) are hashed to prevent leaking information about the kernel memory layout. This has the added benefit of providing a unique identifier. On 64-bit machines the first 32 bits are zeroed. The kernel will print ``(ptrval)`` until it gathers enough entropy." Instead of passing %pK, which can print the correct address, simply remove the entire message as it is not really that useful. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
YueHaibing authored
This patch add error path for can_init() to avoid possible crash if some error occurs. Fixes: 0d66548a ("[CAN]: Add PF_CAN core module") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Eugen Hristev authored
During frame reception while the MCAN is in Error Passive state and the Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen that MCAN_IR.MRAF is set although there was no Message RAM access failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is generated. Work around: The Message RAM Access Failure interrupt routine needs to check whether MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'. In this case, reset MCAN_IR.MRAF. No further action is required. This affects versions older than 3.2.0 Errata explained on Sama5d2 SoC which includes this hardware block: http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf chapter 6.2 Reproducibility: If 2 devices with m_can are connected back to back, configuring different bitrate on them will lead to interrupt storm on the receiving side, with error "Message RAM access failure occurred". Another way is to have a bad hardware connection. Bad wire connection can lead to this issue as well. This patch fixes the issue according to provided workaround. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Sean Nyekjaer authored
Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch adds support for the mcp25625 to the existing mcp251x driver. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Sean Nyekjaer authored
Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch add the mcp25625 to the device tree bindings documentation. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Anssi Hannula authored
Commit 9e5f1b27 ("can: xilinx_can: add support for Xilinx CAN FD core") added a new can_bittiming_const structure for CAN FD cores that support larger values for tseg1, tseg2, and sjw than previous Xilinx CAN cores, but the commit did not actually take that into use. Fix that. Tested with CAN FD core on a ZynqMP board. Fixes: 9e5f1b27 ("can: xilinx_can: add support for Xilinx CAN FD core") Reported-by:
Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com> Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by:
Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Joakim Zhang authored
Current we can meet timeout issue when setting a small bitrate like 10000 as follows on i.MX6UL EVK board (ipg clock = 66MHZ, per clock = 30MHZ): | root@imx6ul7d:~# ip link set can0 up type can bitrate 10000 A link change request failed with some changes committed already. Interface can0 may have been left with an inconsistent configuration, please check. | RTNETLINK answers: Connection timed out It is caused by calling of flexcan_chip_unfreeze() timeout. Originally the code is using usleep_range(10, 20) for unfreeze operation, but the patch (8badd65e can: flexcan: avoid calling usleep_range from interrupt context) changed it into udelay(10) which is only a half delay of before, there're also some other delay changes. After double to FLEXCAN_TIMEOUT_US to 100 can fix the issue. Meanwhile, Rasmus Villemoes reported that even with a timeout of 100, flexcan_probe() fails on the MPC8309, which requires a value of at least 140 to work reliably. 250 works for everyone. Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by:
Dong Aisheng <aisheng.dong@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Alexander Dahl authored
This seems to have slipped in by accident when sorting the entries. Fixes: ffbdd917Signed-off-by:
Alexander Dahl <ada@thorsis.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.2 First set of fixes for 5.2. Most important here are buffer overflow fixes for mwifiex. rtw88 * fix out of bounds compiler warning * fix rssi handling to get 4x more throughput * avoid circular locking rsi * fix unitilised data warning, these are hopefully the last ones so that the warning can be enabled by default mwifiex * fix buffer overflows iwlwifi * remove not used debugfs file * various fixes ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Free AF_PACKET po->rollover properly, from Willem de Bruijn. 2) Read SFP eeprom in max 16 byte increments to avoid problems with some SFP modules, from Russell King. 3) Fix UDP socket lookup wrt. VRF, from Tim Beale. 4) Handle route invalidation properly in s390 qeth driver, from Julian Wiedmann. 5) Memory leak on unload in RDS, from Zhu Yanjun. 6) sctp_process_init leak, from Neil HOrman. 7) Fix fib_rules rule insertion semantic change that broke Android, from Hangbin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ipv6: fix EFAULT on sendto with icmpv6 and hdrincl ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" net: aquantia: fix wol configuration not applied sometimes ethtool: fix potential userspace buffer overflow Fix memory leak in sctp_process_init net: rds: fix memory leak when unload rds_rdma ipv6: fix the check before getting the cookie in rt6_get_cookie ipv4: not do cache for local delivery if bc_forwarding is enabled s390/qeth: handle error when updating TX queue count s390/qeth: fix VLAN attribute in bridge_hostnotify udev event s390/qeth: check dst entry before use s390/qeth: handle limited IPv4 broadcast in L3 TX path net: fix indirect calls helpers for ptype list hooks. net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set udp: only choose unbound UDP socket for multicast when not in a VRF net/tls: replace the sleeping lock around RX resync with a bit lock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Things are looking pretty quiet here in RDMA, not too many bug fixes rolling in right now. The usual driver bug fixes and fixes for a couple of regressions introduced in 5.2: - Fix a race on bootup with RDMA device renaming and srp. SRP also needs to rename its internal sys files - Fix a memory leak in hns - Don't leak resources in efa on certain error unwinds - Don't panic in certain error unwinds in ib_register_device - Various small user visible bug fix patches for the hfi and efa drivers - Fix the 32 bit compilation break" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/efa: Remove MAYEXEC flag check from mmap flow mlx5: avoid 64-bit division IB/hfi1: Validate page aligned for a given virtual address IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value IB/hfi1: Insure freeze_work work_struct is canceled on shutdown IB/rdmavt: Fix alloc_qpn() WARN_ON() RDMA/core: Fix panic when port_data isn't initialized RDMA/uverbs: Pass udata on uverbs error unwind RDMA/core: Clear out the udata before error unwind RDMA/hns: Fix PD memory leak for internal allocation RDMA/srp: Rename SRP sysfs name after IB device rename trigger
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Another round of mostly-benign fixes, the exception being a boot crash on SVE2-capable CPUs (although I don't know where you'd find such a thing, so maybe it's benign too). We're in the process of resolving some big-endian ptrace breakage, so I'll probably have some more for you next week. Summary: - Fix boot crash on platforms with SVE2 due to missing register encoding - Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y - Move cpu_logical_map into smp.h for use by upcoming irqchip drivers - Trivial typo fix in comment - Disable some useless, noisy warnings from GCC 9" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Silence gcc warnings about arch ABI drift ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix arm64: arch_timer: mark functions as __always_inline arm64: smp: Moved cpu_logical_map[] to smp.h arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()
-
- 06 Jun, 2019 10 commits
-
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== Please refer to the patch 1/6 as the main patch with the details on the current sendmsg hook API limitations and proposal to fix it in order to work with basic applications like DNS. Remaining patches are the usual uapi and tooling updates as well as test cases. Thanks a lot! v2 -> v3: - Add attach types to test_section_names.c and libbpf (Andrey) - Added given Acks, rest as-is v1 -> v2: - Split off uapi header sync and bpftool bits (Martin, Alexei) - Added missing bpftool doc and bash completion as well ==================== Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Add cgroup/recvmsg{4,6} to test_section_names as well. Test run output: # ./test_section_names libbpf: failed to guess program type based on ELF section name 'InvAliD' libbpf: supported section(type) names are: [...] libbpf: failed to guess attach type based on ELF section name 'InvAliD' libbpf: attachable section(type) names are: [...] libbpf: failed to guess program type based on ELF section name 'cgroup' libbpf: supported section(type) names are: [...] libbpf: failed to guess attach type based on ELF section name 'cgroup' libbpf: attachable section(type) names are: [...] Summary: 38 PASSED, 0 FAILED Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Extend test_sock_addr for recvmsg test cases, bigger parts of the sendmsg code can be reused for this. Below are the strace view of the recvmsg rewrites; the sendmsg side does not have a BPF prog connected to it for the context of this test: IPv4 test case: [pid 4846] bpf(BPF_PROG_ATTACH, {target_fd=3, attach_bpf_fd=4, attach_type=0x13 /* BPF_??? */, attach_flags=BPF_F_ALLOW_OVERRIDE}, 112) = 0 [pid 4846] socket(AF_INET, SOCK_DGRAM, IPPROTO_IP) = 5 [pid 4846] bind(5, {sa_family=AF_INET, sin_port=htons(4444), sin_addr=inet_addr("127.0.0.1")}, 128) = 0 [pid 4846] socket(AF_INET, SOCK_DGRAM, IPPROTO_IP) = 6 [pid 4846] sendmsg(6, {msg_name={sa_family=AF_INET, sin_port=htons(4444), sin_addr=inet_addr("127.0.0.1")}, msg_namelen=128, msg_iov=[{iov_base="a", iov_len=1}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1 [pid 4846] select(6, [5], NULL, NULL, {tv_sec=2, tv_usec=0}) = 1 (in [5], left {tv_sec=1, tv_usec=999995}) [pid 4846] recvmsg(5, {msg_name={sa_family=AF_INET, sin_port=htons(4040), sin_addr=inet_addr("192.168.1.254")}, msg_namelen=128->16, msg_iov=[{iov_base="a", iov_len=64}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1 [pid 4846] close(6) = 0 [pid 4846] close(5) = 0 [pid 4846] bpf(BPF_PROG_DETACH, {target_fd=3, attach_type=0x13 /* BPF_??? */}, 112) = 0 IPv6 test case: [pid 4846] bpf(BPF_PROG_ATTACH, {target_fd=3, attach_bpf_fd=4, attach_type=0x14 /* BPF_??? */, attach_flags=BPF_F_ALLOW_OVERRIDE}, 112) = 0 [pid 4846] socket(AF_INET6, SOCK_DGRAM, IPPROTO_IP) = 5 [pid 4846] bind(5, {sa_family=AF_INET6, sin6_port=htons(6666), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=htonl(0), sin6_scope_id=0}, 128) = 0 [pid 4846] socket(AF_INET6, SOCK_DGRAM, IPPROTO_IP) = 6 [pid 4846] sendmsg(6, {msg_name={sa_family=AF_INET6, sin6_port=htons(6666), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=htonl(0), sin6_scope_id=0}, msg_namelen=128, msg_iov=[{iov_base="a", iov_len=1}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1 [pid 4846] select(6, [5], NULL, NULL, {tv_sec=2, tv_usec=0}) = 1 (in [5], left {tv_sec=1, tv_usec=999996}) [pid 4846] recvmsg(5, {msg_name={sa_family=AF_INET6, sin6_port=htons(6060), inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=htonl(0), sin6_scope_id=0}, msg_namelen=128->28, msg_iov=[{iov_base="a", iov_len=64}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 1 [pid 4846] close(6) = 0 [pid 4846] close(5) = 0 [pid 4846] bpf(BPF_PROG_DETACH, {target_fd=3, attach_type=0x14 /* BPF_??? */}, 112) = 0 test_sock_addr run w/o strace view: # ./test_sock_addr.sh [...] Test case: recvmsg4: return code ok .. [PASS] Test case: recvmsg4: return code !ok .. [PASS] Test case: recvmsg6: return code ok .. [PASS] Test case: recvmsg6: return code !ok .. [PASS] Test case: recvmsg4: rewrite IP & port (asm) .. [PASS] Test case: recvmsg6: rewrite IP & port (asm) .. [PASS] [...] Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrey Ignatov <rdna@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Trivial patch to bpftool in order to complete enabling attaching programs to BPF_CGROUP_UDP{4,6}_RECVMSG. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrey Ignatov <rdna@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Another trivial patch to libbpf in order to enable identifying and attaching programs to BPF_CGROUP_UDP{4,6}_RECVMSG by section name. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Sync BPF uapi header in order to pull in BPF_CGROUP_UDP{4,6}_RECVMSG attach types. This is done and preferred as an extra patch in order to ease sync of libbpf. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrey Ignatov <rdna@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently to applications as also stated in original motivation in 7828f20e ("Merge branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter two hooks into Cilium to enable host based load-balancing with Kubernetes, I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes typically sets up DNS as a service and is thus subject to load-balancing. Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API is currently insufficient and thus not usable as-is for standard applications shipped with most distros. To break down the issue we ran into with a simple example: # cat /etc/resolv.conf nameserver 147.75.207.207 nameserver 147.75.207.208 For the purpose of a simple test, we set up above IPs as service IPs and transparently redirect traffic to a different DNS backend server for that node: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 The attached BPF program is basically selecting one of the backends if the service IP/port matches on the cgroup hook. DNS breaks here, because the hooks are not transparent enough to applications which have built-in msg_name address checks: # nslookup 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ;; connection timed out; no servers could be reached # dig 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; connection timed out; no servers could be reached For comparison, if none of the service IPs is used, and we tell nslookup to use 8.8.8.8 directly it works just fine, of course: # nslookup 1.1.1.1 8.8.8.8 1.1.1.1.in-addr.arpa name = one.one.one.one. In order to fix this and thus act more transparent to the application, this needs reverse translation on recvmsg() side. A minimal fix for this API is to add similar recvmsg() hooks behind the BPF cgroups static key such that the program can track state and replace the current sockaddr_in{,6} with the original service IP. From BPF side, this basically tracks the service tuple plus socket cookie in an LRU map where the reverse NAT can then be retrieved via map value as one example. Side-note: the BPF cgroups static key should be converted to a per-hook static key in future. Same example after this fix: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 Lookups work fine now: # nslookup 1.1.1.1 1.1.1.1.in-addr.arpa name = one.one.one.one. Authoritative answers can be found from: # dig 1.1.1.1 ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 512 ;; QUESTION SECTION: ;1.1.1.1. IN A ;; AUTHORITY SECTION: . 23426 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400 ;; Query time: 17 msec ;; SERVER: 147.75.207.207#53(147.75.207.207) ;; WHEN: Tue May 21 12:59:38 UTC 2019 ;; MSG SIZE rcvd: 111 And from an actual packet level it shows that we're using the back end server when talking via 147.75.207.20{7,8} front end: # tcpdump -i any udp [...] 12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) [...] In order to be flexible and to have same semantics as in sendmsg BPF programs, we only allow return codes in [1,1] range. In the sendmsg case the program is called if msg->msg_name is present which can be the case in both, connected and unconnected UDP. The former only relies on the sockaddr_in{,6} passed via connect(2) if passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar way to call into the BPF program whenever a non-NULL msg->msg_name was passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note that for TCP case, the msg->msg_name is ignored in the regular recvmsg path and therefore not relevant. For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE, the hook is not called. This is intentional as it aligns with the same semantics as in case of TCP cgroup BPF hooks right now. This might be better addressed in future through a different bpf_attach_type such that this case can be distinguished from the regular recvmsg paths, for example. Fixes: 1cedee13 ("bpf: Hooks for sys_sendmsg") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrey Ignatov <rdna@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Martynas Pumputis <m@lambda.lt> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - Fix crashes when accessing PCI devices on some machines like C240 and J5000. The crashes were triggered because we replaced cache flushes by nops in the alternative coding where we shouldn't for some machines. - Dave fixed a race in the usage of the sr1 space register when used to load the coherence index. - Use the hardware lpa instruction to to load the physical address of kernel virtual addresses in the iommu driver code. - The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve that by rearranging functions in the final vmlinux executeable. - Some defconfig cleanups and removal of compiler warnings. * 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix crash due alternative coding for NP iopdir_fdc bit parisc: Use lpa instruction to load physical addresses in driver code parisc: configs: Remove useless UEVENT_HELPER_PATH parisc: Use implicit space register selection for loading the coherence index of I/O pdirs parisc: Fix compiler warnings in float emulation code parisc/slab: cleanup after /proc/slab_allocators removal parisc: Allow building 64-bit kernel without -mlong-calls compiler option parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a regression that breaks the jitterentropy RNG and a potential memory leak in hmac" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hmac - fix memory leak in hmac_init_tfm() crypto: jitterentropy - change back to module_init()
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Here are a couple more bug fixes for 5.2. Changes since last update: - Fix some forgotten strings in a log debugging function - Fix incorrect unit conversion in online fsck code" * tag 'xfs-5.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: inode btree scrubber should calculate im_boffset correctly xfs: fix broken log reservation debugging
-