- 07 Dec, 2021 20 commits
-
-
Aditya Garg authored
Some Macs with the T2 security chip had Bluetooth not working. To fix it we add DMI based quirks to disable querying of LE Tx power. Signed-off-by:
Aditya Garg <gargaditya08@live.com> Reported-by:
Orlando Chamberlain <redecorating@protonmail.com> Tested-by:
Marcel Holtmann <marcel@holtmann.org>
-
Aditya Garg authored
Some devices have a bug causing them to not work if they query LE tx power on startup. Thus we add a quirk in order to not query it and default min/max tx power values to HCI_TX_POWER_INVALID. Signed-off-by:
-
Sean Wang authored
Similar to MT7921 btusb, we enable AOSP extension for MT7921 btmtksdio as well. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Łukasz Bartosik authored
Enable msft opcode for mt7921 chip. Signed-off-by:
Łukasz Bartosik <lb@semihalf.com> Signed-off-by:
-
Zijun Hu authored
Add a USB ID 0489:e0e3 of HP to usb_device_id table for WCN6855. -Device(0489:e0e3) from /sys/kernel/debug/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0e3 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by:
Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
This change the use of switch statement to a function table which is easier to extend. Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
This change the use of switch statement to a function table which is easier to extend and can include min/max length of each command. Signed-off-by:
-
Luiz Augusto von Dentz authored
This change the use of switch statement to a function table which is easier to extend and can include min/max length of each subevent. Signed-off-by:
-
Luiz Augusto von Dentz authored
This change the use of switch statement to a function table which is easier to extend and can include min/max length of each HCI event. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the LE Direct Advertising Report events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the LE Extended Advertising Report events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the LE Advertising Report events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the LE Metaevents received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the Extended Inquiry Result events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the Inquiry Result with RSSI events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the Inquiry Result events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the Number of Complete Packets events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the Command Complete events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses skb_pull_data to check the BR/EDR events received have the minimum required length. Signed-off-by:
-
Luiz Augusto von Dentz authored
Like skb_pull but returns the original data pointer before pulling the data after performing a check against sbk->len. This allows to change code that does "struct foo *p = (void *)skb->data;" which is hard to audit and error prone, to: p = skb_pull_data(skb, sizeof(*p)); if (!p) return; Which is both safer and cleaner. Acked-by:Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 03 Dec, 2021 6 commits
-
-
Sean Wang authored
btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that SDIO power is being shut off during the device is in suspend. That fixes the SDIO command fails to access the bus after the device is resumed. Fixes: 7f3c563c ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth") Co-developed-by:
Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by:
-
Sean Wang authored
Runtime pm ops is not aware the sdio_func status that is probably being disabled by btmtksdio_close. Thus, we are only able to access the sdio_func for the runtime pm operations only when the sdio_func is available. Fixes: 7f3c563c ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth") Co-developed-by:
-
Benjamin Berg authored
Cancel sync commands when transmission of URBs fail. This is done for both failures to send a command URB and also when the interrupt URB used to retrieve a response fails. This approach is sufficient to quickly deal with certain errors such as a device being disconnected while synchronous commands are done during initialization. Signed-off-by:
Benjamin Berg <bberg@redhat.com> Signed-off-by:
-
Benjamin Berg authored
If sending a frame failed any sync command associated with it will never be completed. As such, cancel any such command immediately to avoid timing out. Signed-off-by:
-
Benjamin Berg authored
After transfer errors it makes sense to cancel an ongoing synchronous command that cannot complete anymore. To permit this, export the old hci_req_sync_cancel function as hci_cmd_sync_cancel in the API. Signed-off-by:
-
Benjamin Berg authored
Resetting the timers and cmd_cnt means that we assume the device will be in a good state after the sync command finishes. Without this a chain of synchronous commands might get stuck if one of them is cancelled. Signed-off-by:
-
- 25 Nov, 2021 4 commits
-
-
Archie Pusaka authored
When doing remote name request, we cannot scan. In the normal case it's OK since we can expect it to finish within a short amount of time. However, there is a possibility to scan lots of devices that (1) requires Remote Name Resolve (2) is unresponsive to Remote Name Resolve When this happens, we are stuck to do Remote Name Resolve until all is done before continue scanning. This patch adds a time limit to stop us spending too long on remote name request. Signed-off-by:
Archie Pusaka <apusaka@chromium.org> Reviewed-by:
Miao-chen Chou <mcchou@chromium.org> Signed-off-by:
-
Archie Pusaka authored
Introducing NAME_REQUEST_FAILED flag that will be sent together with device found event on name resolve failure. This will provide the userspace with an information so it can decide not to resolve the name for these devices in the future. Signed-off-by:
-
Luiz Augusto von Dentz authored
num_keys is actually 2 octects not 1: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 1989: Num_Keys_Deleted: Size: 2 octets 0xXXXX Number of Link Keys Deleted Signed-off-by:
-
Luiz Augusto von Dentz authored
Both max_num_keys and num_key are 2 octects: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 1985: Max_Num_Keys: Size: 2 octets Range: 0x0000 to 0xFFFF Num_Keys_Read: Size: 2 octets Range: 0x0000 to 0xFFFF Signed-off-by:
-
- 24 Nov, 2021 10 commits
-
-
Brian Gix authored
Check for out-of-bound read was being performed at the end of while num_reports loop, and would fill journal with false positives. Added check to beginning of loop processing so that it doesn't get checked after ptr has been advanced. Signed-off-by:
Brian Gix <brian.gix@intel.com> Signed-off-by:
-
tjiang@codeaurora.org authored
Add the more IDs of HP to usb_device_id table for WCN6855. -Device(0489:e0cc) from /sys/kernel/debug/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0cc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms -Device(0489:e0d6) from /sys/kernel/debug/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0d6 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by:
Tim Jiang <tjiang@codeaurora.org> Signed-off-by:
-
tjiang@codeaurora.org authored
The board ID should be split into two bytes. The 1st byte is chip ID, and the 2nd byte is platform ID. For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID. we have several platforms, and platform IDs are continuously added. We would not distinguish different chips if we get these mixed up. Platform ID: 0x00 is for Mobile 0x01 is for X86 0x02 is for Automotive 0x03 is for Consumer electronic Signed-off-by:
-
Larry Finger authored
The Realtek RTL8852AE has both wifi and BT components. The latter reports a USB ID of 0bda:385a, which is not in the table. The portion of /sys/kernel/debug/usb/devices pertaining to this device is T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=385a Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by:
-
Sean Wang authored
Use the existent variable to drop the unnecessary variable created. Signed-off-by:
-
Sean Wang authored
Add support of processing the firmware coredump and log for the diagnostic purpose. Co-developed-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: updates for -next This series includes some updates for the HNS3 ethernet driver. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Yufeng Mo authored
When tx timeout occurs, the info of dql maybe helpful, so print these info to hns3_get_tx_timeo_queue_info(). Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Jie Wang authored
Currently, there is no way to get drop packet number of multicast and broadcast in IGU hardware module, it is not convenient to find problem when multicast packet or broadcast packet is dropped in IGU, so this patch adds statistics for them in debugfs. Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
-
Yufeng Mo authored
Printing the whole MAC addresse may bring security risks. Therefore, the MAC address is partially encrypted to improve security. Signed-off-by:
-
