The timeout loop look more naturally when done like

	unsigned long timeout = ...;
	...
	do {
		...
		if (cond)
			return %OK;

		sleep(...);
	} while (time_before(timeout));

	...print timeout error...
	return %ERROR;

It also saves LOCs. Convert the driver to this format of timeout loop.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

ASUS TUF FX705DY/FX505DY starts in silent mode and under heavy
CPU load it overheats and drops CPU frequency to 399MHz and stays
at it until reboot [1]. Set throttle thermal policy to default
to avoid overheating and throttlig.

[1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=203733Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Throttle thermal policy ACPI device is used to control CPU cooling and
throttling. This patch adds sysfs entry for setting current mode and
Fn+F5 hotkey that switches to next.

Policy modes:
* 0x00 - default
* 0x01 - overboost
* 0x02 - silent
Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

1. Put on one line PROPERTY_ENTRY_STRING("firmware-name", ...) lines. In most
   cases this doesn't over the limit, the rest is pretty much obvious from
   reading point of view.
2. Put on one line DMI_MATCH() parameters, we already have over the limit lines.
3. Reduce indentation of function parameters.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen info for the PiPO W11 tablet.
Signed-off-by: Tim Josten <timjosten@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Adding new CML CPU model ID into platform driver support list.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Allow the user to configure the fan to turn on / speed-up at lower
thresholds then before (20 degrees Celcius as minimum instead of 40) and
likewise also allow the user to delay the fan speeding-up till the
temperature hits 90 degrees Celcius (was 70).

Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Use our default values when wrong module-parameters are given, instead of
refusing to load. Refusing to load leaves the fan at the BIOS default
setting, which is "Off". The CPU's thermal throttling should protect the
system from damage, but not-loading is really not the best fallback in this
case.

This commit fixes this by re-setting module-parameter values to their
defaults if they are out of range, instead of failing the probe with
-EINVAL.

Cc: stable@vger.kernel.org
Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Fixes: 594ce6db ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This commit fixes the potential deadlock caused by the console Rx
and Tx processing at the same time. Rx and Tx both take the console
and tmfifo spinlock but in different order which causes potential
deadlock. The fix is to use different tmfifo spinlock for Rx and
Tx since they protect different resources and it's safe to split
the lock.

Below is the reported call trace when copying/pasting large string
in the console.

Rx:
    _raw_spin_lock_irqsave (hvc lock)
    __hvc_poll
    hvc_poll
    in_intr
    vring_interrupt
    mlxbf_tmfifo_rxtx_one_desc (tmfifo lock)
    mlxbf_tmfifo_rxtx
    mlxbf_tmfifo_work_rxtx
Tx:
    _raw_spin_lock_irqsave (tmfifo lock)
    mlxbf_tmfifo_virtio_notify
    virtqueue_notify
    virtqueue_kick
    put_chars
    hvc_push
    hvc_write (hvc lock)
    ...
    do_tty_write
    tty_write

Fixes: 1357dfd7 ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Cc: <stable@vger.kernel.org> # 5.4+
Reviewed-by: David Woods <dwoods@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This patch corrects the SPDX License Identifier style in
header files related to x86 Platform Specific Drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

kstrtou32_from_user() may return different error codes on certain
circumstances. Respect all possible values.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fix spelling of MHz unit in a comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There are two problematic places where indentation is not good to a reader
and maintainer. Fix them here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is a function which is solely used for DebugFS interface,
do not build it otherwise.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

kstrtou32_from_user() may return different error codes on certain
circumstances. Respect all possible values.

While here, move it out of the lock: there is no data access that lock guards.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.

While here, drop initialized but unused ssram_base_addr and ssram_size members.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add Intel Elkhart Lake to the list of the platforms that driver supports
for the PMC device.

Just like Ice Lake and Tiger Lake, Elkhart Lake can also reuse all the
Cannon Lake PCH IPs. Also, it uses the same PCH IPs of Tiger Lake, no
additional effort is needed to enable but to simply reuse them.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add Intel Tiger Lake to the list of the platforms that driver supports
for the PMC device.

Just like Ice Lake, Tiger Lake can also reuse all the Cannon Lake PCH
IPs. Since Tiger Lake has almost the same number of PCH IPs as Ice Lake,
reuse Ice Lake's PPFEAR_NUM_ENTRIES instead of defining a new macro.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Check if the platform supports and only then add a debugfs entry for PCH
IP power gating status.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The current implementation of intel_pmc_core driver allows to reuse, but does
not reflect the exact number and names of IPs for a newer platform which
does not necessarily support all the IPs in the entries. The names and
number of these IPs might differ from its previous platforms. The number
of PCH IPs per platform is calculated based on PPFEAR_NUM_ENTRIES
defined, where each entry represents a bucket (8 bits). The platform can
support 'n' entries, but not necessarily all 'n * 8' IPs.

Create platform dependent bitmap structures to specify the exact number,
names of IPs while reusing the existing IPs.

The changes in this patch are preparatory to accommodate future SoCs
that might reuse the CNL/ICL PCH IPs, and to reflect the exact number of
IPs with its names.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no need to assign NULL or 0 in the static structures explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

It is common practice to place a comma after the last entry in an
initialized array to avoid the need to add one in future patches that
extend the array. But when the last element is a termination marker, the
comma could be harmful. Any new entries must be added before the
terminator (and the comma would prevent the compiler from issuing a
warning about an entry after the terminator).

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Mainly does:
 - capitalize gpio and bios to GPIO and BIOS
 - capitalize beginning of comments
 - add periods in multi-line comments
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

GPIO stuff on APUv4 seems to be the same as on APUv2, so we just
need to match on DMI data.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The mapping entry has to hold the GPIO line index instead of
controller's register number.

Fixes: 5037d4dd ("platform/x86: pcengines-apuv2: wire up simswitch gpio as led")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.

Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):

Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5

We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.

This commits bumps the buffer size, fixing the error.

Fixes: 8a1513b4 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This is a follow-up commit for the sysfs attributes to change
from DRIVER_ATTR to DEVICE_ATTR according to some initial comments.
In such case, it's better to point the sysfs path to the device
itself instead of the driver. The ABI document is also updated.

Fixes: 79e29cb8 ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull rdma fixes from Doug Ledford:
 "A small collection of -rc fixes. Mostly. One API addition, but that's
  because we wanted to use it in a fix. There's also a bug fix that is
  going to render the 5.5 kernel's soft-RoCE driver incompatible with
  all soft-RoCE versions prior, but it's required to actually implement
  the protocol according to the RoCE spec and required in order for the
  soft-RoCE driver to be able to successfully work with actual RoCE
  hardware.

  Summary:

   - Update Steve Wise info

   - Fix for soft-RoCE crc calculations (will break back compatibility,
     but only with the soft-RoCE driver, which has had this bug since it
     was introduced and it is an on-the-wire bug, but will make
     soft-RoCE fully compatible with real RoCE hardware)

   - cma init fixup

   - counters oops fix

   - fix for mlx4 init/teardown sequence

   - fix for mkx5 steering rules

   - introduce a cleanup API, which isn't a fix, but we want to use it
     in the next fix

   - fix for mlx5 memory management that uses API in previous patch"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Fix device memory flows
  IB/core: Introduce rdma_user_mmap_entry_insert_range() API
  IB/mlx5: Fix steering rule of drop and count
  IB/mlx4: Follow mirror sequence of device add during device removal
  RDMA/counter: Prevent auto-binding a QP which are not tracked with res
  rxe: correctly calculate iCRC for unaligned payloads
  Update mailmap info for Steve Wise
  RDMA/cma: add missed unregister_pernet_subsys in init failure

Pull RISC-V fixes from Paul Walmsley:
 "Two minor build fixes:

   - Fix builds of the ELF loader when built with 'make -j1' (nommu
     only)

   - Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found
     during randconfig testing)"

* tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: only select serial sifive if TTY is enabled
  riscv: Fix build dependency for loader

Pull xen fixes from Juergen Gross:
 "Two fixes: one for a resource accounting bug in some configurations
  and a fix for another patch which went into rc1"

* tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix ballooned page accounting without hotplug enabled
  xen-blkback: prevent premature module unload

Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
 "This small series replaces all in-kernel calls to the
  userspace-focused ksys_mount() and ksys_dup() with calls to
  kernel-centric functions:

  For each replacement of ksys_mount() with do_mount(), one needs to
  verify that the first and third parameter (char *dev_name, char *type)
  are strings allocated in kernelspace and that the fifth parameter
  (void *data) is either NULL or refers to a full page (only occurence
  in init/do_mounts.c::do_mount_root()). The second and fourth
  parameters (char *dir_name, unsigned long flags) are passed by
  ksys_mount() to do_mount() unchanged, and therefore do not require
  particular care.

  Moreover, instead of pretending to be userspace, the opening of
  /dev/console as stdin/stdout/stderr can be implemented using in-kernel
  functions as well. Thereby, ksys_dup() can be removed for good"

[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
  case, but it at least removes _some_ of the users of "treat kernel
  pointers as user pointers for our magical init sequence".

  One day we'll hopefully be rid of it all, and can initialize our
  init_thread addr_limit to USER_DS.    - Linus ]

* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  fs: remove ksys_dup()
  init: unify opening /dev/console as stdin/stdout/stderr
  init: use do_mount() instead of ksys_mount()
  initrd: use do_mount() instead of ksys_mount()
  devtmpfs: use do_mount() instead of ksys_mount()

Merge tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fall through fix from Gustavo Silva:
 "Fix compile error on sh by marking expected switch fall-through"

* tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  sh: kgdb: Mark expected switch fall-throughs

Pull SCSI fixes from James Bottomley:
 "24 fixes, all in drivers. The lion's share (16) are qla2xxx and the
  rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
  scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
  scsi: iscsi: Fix a potential deadlock in the timeout handler
  scsi: smartpqi: Update attribute name to `driver_version`
  scsi: libsas: stop discovering if oob mode is disconnected
  scsi: ufs: Disable autohibern8 feature in Cadence UFS
  scsi: iscsi: qla4xxx: fix double free in probe
  scsi: ufs: Give an unique ID to each ufs-bsg
  scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB
  scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
  scsi: qla2xxx: Don't defer relogin unconditonally
  scsi: qla2xxx: Send Notify ACK after N2N PLOGI
  scsi: qla2xxx: Configure local loop for N2N target
  scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
  scsi: qla2xxx: Don't call qlt_async_event twice
  scsi: qla2xxx: Allow PLOGI in target mode
  scsi: qla2xxx: Change discovery state before PLOGI
  scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
  scsi: qla2xxx: Initialize free_work before flushing it
  scsi: qla2xxx: Use explicit LOGO in target mode
  scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd
  ...

Pull char/misc driver fixes from Greg KH:
 "Here are six small fixes for some reported char/misc driver issues:

   - fix build warnings with new 'awk' with the raid6 code

   - four interconnect driver bugfixes

   - binder fix for reported problem

  All of these except the binder fix have been in linux-next with no
  reported issues. The binder fix is "new" but Todd says it is good as
  he has tested it :)"

* tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: fix incorrect calculation for num_valid
  interconnect: qcom: msm8974: Walk the list safely on node removal
  interconnect: qcom: qcs404: Walk the list safely on node removal
  interconnect: qcom: sdm845: Walk the list safely on node removal
  interconnect: qcom: Fix Kconfig indentation
  lib: raid6: fix awk build warnings

Pull driver core fixes from Greg KH:
 "Here are two small driver core fixes to resolve some reported issues

  The first is to handle the much-reported (by the build systems)
  problem that superH does not boot anymore.

  The second handles an issue in the new platform logic that a number of
  people ran into with the automated tests in kbuild

  Both of these have been in linux-next with no reported issues"

* tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: Fix boot problem on SuperH
  of/platform: Unconditionally pause/resume sync state during kernel init

Pull staging/IIO fixes from Greg KH:
 "Here are a number of small staging and IIO driver fixes for reported
  issues for 5.5-rc2

  Nothing major, a bunch of tiny IIO driver issues resolved, and some
  staging driver fixes for things that people ran into with 5.5-rc1.
  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
  fbtft: Fix the initialization from property algorithm
  staging: rtl8712: fix interface sanity check
  staging: rtl8188eu: fix interface sanity check
  staging: gigaset: add endpoint-type sanity check
  staging: gigaset: fix illegal free on probe errors
  staging: gigaset: fix general protection fault on probe
  staging: vchiq: call unregister_chrdev_region() when driver registration fails
  staging: exfat: fix multiple definition error of `rename_file'
  staging/wlan-ng: add CRC32 dependency in Kconfig
  staging: hp100: Fix build error without ETHERNET
  staging: fbtft: Do not hardcode SPI CS polarity inversion
  staging: exfat: properly support discard in clr_alloc_bitmap()
  staging/octeon: Mark Ethernet driver as BROKEN
  iio: adc: max9611: Fix too short conversion time delay
  iio: ad7949: fix channels mixups
  iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
  iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
  iio: imu: st_lsm6dsx: fix decimation factor estimation
  iio: imu: inv_mpu6050: fix temperature reporting using bad unit
  iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
  ...

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for reported issues for 5.5-rc2

  There's the usual gadget and xhci fixes, as well as some other
  problems that syzbot has been finding during it's fuzzing runs. Full
  details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
  usb: dwc3: pci: add ID for the Intel Comet Lake -H variant
  xhci: make sure interrupts are restored to correct state
  xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.
  xhci: Increase STS_HALT timeout in xhci_suspend()
  usb: xhci: only set D3hot for pci device
  xhci: fix USB3 device initiated resume race with roothub autosuspend
  xhci: Fix memory leak in xhci_add_in_port()
  USB: Fix incorrect DMA allocations for local memory pool drivers
  usb: gadget: fix wrong endpoint desc
  usb: dwc3: ep0: Clear started flag on completion
  usb: dwc3: gadget: Clear started flag for non-IOC
  usb: dwc3: gadget: Fix logical condition
  USB: atm: ueagle-atm: add missing endpoint check
  USB: adutux: fix interface sanity check
  USB: idmouse: fix interface sanity checks
  USB: serial: io_edgeport: fix epic endpoint lookup
  usb: mon: Fix a deadlock in usbmon between mmap and read
  usb: common: usb-conn-gpio: Don't log an error on probe deferral
  usb: core: urb: fix URB structure initialization function
  usb: typec: fix use after free in typec_register_port()
  ...

Pull s390 updates from Vasily Gorbik:

 - Add support for KASAN_VMALLOC feature.

 - Remove the last user of problematic diag 0x44 call.

 - Adjust sampling interval and avoid sample data block overflow
   condition on pressure in perf code.

 - Prefer EOPNOTSUPP over ENOTSUPP and comments fixes.

* tag 's390-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kasan: add KASAN_VMALLOC support
  s390: remove last diag 0x44 caller
  s390/uv: use EOPNOTSUPP instead of ENOTSUPP
  s390/cpum_sf: Avoid SBD overflow condition in irq handler
  s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits
  s390/test_unwind: fix spelling mistake "reqister" -> "register"
  s390/spinlock: remove confusing comment in arch_spin_lock_wait