- 01 Nov, 2022 7 commits
-
-
Christoph Hellwig authored
Do the request_module and repeated lookup in the only caller that cares, pick a saner name that explains where are actually doing a lookup and use a sane calling conventions that passes the queue first. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221030100714.876891-3-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Yu Kuai authored
It's the same with bfq_weights_tree_remove() now. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220916071942.214222-7-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
The 'bfq_data' and 'rb_root_cached' can both be accessed through 'bfq_queue', thus only pass 'bfq_queue' as parameter. Signed-off-by:
-
Yu Kuai authored
Now that root group is counted into 'num_groups_with_pending_reqs', 'num_groups_with_pending_reqs > 0' is always true in bfq_asymmetric_scenario(). Thus change the condition to '> 1'. On the other hand, this change can enable concurrent sync io if only one group is activated. Signed-off-by:
-
Yu Kuai authored
Currently, bfq can't handle sync io concurrently as long as they are not issued from root group. This is because 'bfqd->num_groups_with_pending_reqs > 0' is always true in bfq_asymmetric_scenario(). The way that bfqg is counted into 'num_groups_with_pending_reqs': Before this patch: 1) root group will never be counted. 2) Count if bfqg or it's child bfqgs have pending requests. 3) Don't count if bfqg and it's child bfqgs complete all the requests. After this patch: 1) root group is counted. 2) Count if bfqg have pending requests. 3) Don't count if bfqg complete all the requests. With this change, the occasion that only one group is activated can be detected, and next patch will support concurrent sync io in the occasion. Signed-off-by:
-
Yu Kuai authored
Prepare to refactor the counting of 'num_groups_with_pending_reqs'. Add a counter in bfq_group, update it while tracking if bfqq have pending requests and when bfq_bfqq_move() is called. Signed-off-by:
-
Yu Kuai authored
If entity belongs to bfqq, then entity->in_groups_with_pending_reqs is not used currently. This patch use it to track if bfqq has pending requests through callers of weights_tree insertion and removal. Signed-off-by:
-
- 31 Oct, 2022 4 commits
-
-
Jinlong Chen authored
The calling relationship in blk_mq_destroy_queue() is as follows: blk_mq_destroy_queue() ... -> blk_queue_start_drain() -> blk_freeze_queue_start() <- called ... -> blk_freeze_queue() -> blk_freeze_queue_start() <- called again -> blk_mq_freeze_queue_wait() ... So there is a redundant call to blk_freeze_queue_start(). Replace blk_freeze_queue() with blk_mq_freeze_queue_wait() to avoid the redundant call. Signed-off-by:Jinlong Chen <nickyc975@zju.edu.cn> Reviewed-by:
-
Jinlong Chen authored
The only caller that needs queue_is_mq check is del_gendisk, so move the check into it. Signed-off-by:
-
Dawei Li authored
Convert current looping-based implementation into bit operation, which can bring improvement for: 1) bitops is more efficient for its arch-level optimization. 2) Given that blksize_bits() is inline, _if_ @size is compile-time constant, it's possible that order_base_2() _may_ make output compile-time evaluated, depending on code context and compiler behavior. Signed-off-by:
Dawei Li <set_pte_at@outlook.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
-
David Jeffery authored
David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic. So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge. But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: virtualization@lists.linux-foundation.org Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
- 25 Oct, 2022 8 commits
-
-
Bart Van Assche authored
This patch removes a conditional jump from get_max_segment_size(). The x86-64 assembler code for this function without this patch is as follows: 206 return min_not_zero(mask - offset + 1, 0x0000000000000118 <+72>: not %rax 0x000000000000011b <+75>: and 0x8(%r10),%rax 0x000000000000011f <+79>: add $0x1,%rax 0x0000000000000123 <+83>: je 0x138 <bvec_split_segs+104> 0x0000000000000125 <+85>: cmp %rdx,%rax 0x0000000000000128 <+88>: mov %rdx,%r12 0x000000000000012b <+91>: cmovbe %rax,%r12 0x000000000000012f <+95>: test %rdx,%rdx 0x0000000000000132 <+98>: mov %eax,%edx 0x0000000000000134 <+100>: cmovne %r12d,%edx With this patch applied: 206 return min(mask - offset, (unsigned long)lim->max_segment_size - 1) + 1; 0x000000000000003f <+63>: mov 0x28(%rdi),%ebp 0x0000000000000042 <+66>: not %rax 0x0000000000000045 <+69>: and 0x8(%rdi),%rax 0x0000000000000049 <+73>: sub $0x1,%rbp 0x000000000000004d <+77>: cmp %rbp,%rax 0x0000000000000050 <+80>: cmova %rbp,%rax 0x0000000000000054 <+84>: add $0x1,%eax Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Bart Van Assche authored
Document which functions do not modify the queue limits. Reviewed-by:
-
Bart Van Assche authored
Commit c75e707f ("block: remove the per-bio/request write hint") removed all code that uses the struct request write_hint member. Hence also remove 'write_hint' itself. Reviewed-by:
-
Christoph Hellwig authored
bio_start_io_acct_time is not actually used anywhere, so remove it. Signed-off-by:
-
Christoph Hellwig authored
Now that blk_mq_destroy_queue does not release the queue reference, there is no need for a second admin queue reference to be held by the apple_nvme structure. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Sven Peter <sven@svenpeter.dev> Reviewed-by:
-
Christoph Hellwig authored
Now that blk_mq_destroy_queue does not release the queue reference, there is no need for a second admin queue reference to be held by the nvme_dev. Signed-off-by:
-
Christoph Hellwig authored
Now that blk_mq_destroy_queue does not release the queue reference, there is no need for a second queue reference to be held by the scsi_device. Signed-off-by:
-
Christoph Hellwig authored
The fact that blk_mq_destroy_queue also drops a queue reference leads to various places having to grab an extra reference. Move the call to blk_put_queue into the callers to allow removing the extra references. Signed-off-by:
-
- 24 Oct, 2022 14 commits
-
-
Jinlong Chen authored
The current reference management logic of io scheduler modules contains refcnt problems. For example, blk_mq_init_sched may fail before or after the calling of e->ops.init_sched. If it fails before the calling, it does nothing to the reference to the io scheduler module. But if it fails after the calling, it releases the reference by calling kobject_put(&eq->kobj). As the callers of blk_mq_init_sched can't know exactly where the failure happens, they can't handle the reference to the io scheduler module properly: releasing the reference on failure results in double-release if blk_mq_init_sched has released it, and not releasing the reference results in ghost reference if blk_mq_init_sched did not release it either. The same problem also exists in io schedulers' init_sched implementations. We can address the problem by adding releasing statements to the error handling procedures of blk_mq_init_sched and init_sched implementations. But that is counterintuitive and requires modifications to existing io schedulers. Instead, We make elevator_alloc get the io scheduler module references that will be released by elevator_release. And then, we match each elevator_get with an elevator_put. Therefore, each reference to an io scheduler module explicitly has its own getter and releaser, and we no longer need to worry about the refcnt problems. The bugs and the patch can be validated with tools here: https://github.com/nickyc975/linux_elv_refcnt_bug.git [hch: split out a few bits into separate patches, use a non-try module_get in elevator_alloc] Signed-off-by:
-
Jinlong Chen authored
No need to find the actual elevator_type struct for this comparism, the name is all that is needed. Signed-off-by:
-
Christoph Hellwig authored
The stripped name should also be used for the none check. To do so strip it in the caller and pass in the sanitized name. Drop the pointless __ prefix in the function name while we're at it. Based on a patch from Jinlong Chen <nickyc975@zju.edu.cn>. Signed-off-by:
-
Christoph Hellwig authored
Make sure we have helpers for all relevant module refcount operations on the elevator_type in elevator.h, and use them. Move the call to the get helper in blk_mq_elv_switch_none a bit so that it is obvious with a less verbose comment. Signed-off-by:
-
Yu Kuai authored
Commit b5dc5d4d ("block,bfq: Disable writeback throttling") tries to disable wbt for bfq, it's done by calling wbt_disable_default() in bfq_init_queue(). However, wbt is still enabled if default elevator is bfq: device_add_disk elevator_init_mq bfq_init_queue wbt_disable_default -> done nothing blk_register_queue wbt_enable_default -> wbt is enabled Fix the problem by adding a new flag ELEVATOR_FLAG_DISBALE_WBT, bfq will set the flag in bfq_init_queue, and following wbt_enable_default() won't enable wbt while the flag is set. Signed-off-by:
-
Yu Kuai authored
There are only one flag to indicate that elevator is registered currently, prepare to add a flag to disable wbt if default elevator is bfq. Signed-off-by:
-
Yu Kuai authored
Currently, if wbt is initialized and then disabled by wbt_disable_default(), sysfs will still show valid wbt_lat_usec, which will confuse users that wbt is still enabled. This patch shows wbt_lat_usec as zero if it's disabled. Signed-off-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by:
-
Yu Kuai authored
Currently, if user disable wbt through sysfs, 'enable_state' will be 'WBT_STATE_ON_MANUAL', which will be confusing. Add a new state 'WBT_STATE_OFF_MANUAL' to cover that case. Signed-off-by:
-
Yu Kuai authored
If CONFIG_BLK_WBT_MQ is disabled, wbt_init() won't do anything. Signed-off-by:
-
Yu Kuai authored
"elevator_queue *e" is already declared and initialized in the beginning of elv_unregister_queue(). Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221019121518.3865235-2-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
'ioc->params' is updated in ioc_refresh_params(), which is proteced by 'ioc->lock', however, ioc_timer_fn() read params outside the lock. Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20221012094035.390056-5-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
This won't cause any severe problem currently, however, this doesn't seems appropriate: 1) 'ioc->params' is read from multiple places without holding 'ioc->lock', unexpected value might be read if writing it concurrently. 2) If configuration is changed while io is throttling, the functionality might be affected. For example, if module params is updated and cost becomes smaller, waiting for timer that is caculated under old configuration is not appropriate. Signed-off-by:
-
Yu Kuai authored
ioc_qos_write() and ioc_cost_model_write() are the same: 1) hold lock to read 'ioc->params' to local variable; 2) update params to local variable without lock; 3) hold lock to write local variable to 'ioc->params'; In theroy, if user updates params concurrenty, the params might be lost: t1: update params a t2: update params b spin_lock_irq(&ioc->lock); memcpy(qos, ioc->params.qos, sizeof(qos)) spin_unlock_irq(&ioc->lock); qos[a] = xxx; spin_lock_irq(&ioc->lock); memcpy(qos, ioc->params.qos, sizeof(qos)) spin_unlock_irq(&ioc->lock); qos[b] = xxx; spin_lock_irq(&ioc->lock); memcpy(ioc->params.qos, qos, sizeof(qos)); ioc_refresh_params(ioc, true); spin_unlock_irq(&ioc->lock); spin_lock_irq(&ioc->lock); // updates of a will be lost memcpy(ioc->params.qos, qos, sizeof(qos)); ioc_refresh_params(ioc, true); spin_unlock_irq(&ioc->lock); Althrough this is not common case, the problem can by fixed easily by holding the lock through the read, update, write process. Signed-off-by:
-
Yu Kuai authored
Commit b5dc5d4d ("block,bfq: Disable writeback throttling") disable wbt for bfq, because different write-throttling heuristics should not work together. For the same reason, wbt and iocost should not work together as well, unless admin really want to do that, dispite that performance is affected. Signed-off-by:
-
- 23 Oct, 2022 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "RISC-V: - Fix compilation without RISCV_ISA_ZICBOM - Fix kvm_riscv_vcpu_timer_pending() for Sstc ARM: - Fix a bug preventing restoring an ITS containing mappings for very large and very sparse device topology - Work around a relocation handling error when compiling the nVHE object with profile optimisation - Fix for stage-2 invalidation holding the VM MMU lock for too long by limiting the walk to the largest block mapping size - Enable stack protection and branch profiling for VHE - Two selftest fixes x86: - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl selftests: - synchronize includes between include/uapi and tools/include/uapi" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools: include: sync include/api/linux/kvm.h KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter() kvm: Add support for arch compat vm ioctls RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc RISC-V: Fix compilation without RISCV_ISA_ZICBOM KVM: arm64: vgic: Fix exit condition in scan_its_table() KVM: arm64: nvhe: Fix build with profile optimization KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test KVM: arm64: selftests: Fix multiple versions of GIC creation KVM: arm64: Enable stack protection and branch profiling for VHE KVM: arm64: Limit stage2_apply_range() batch size to largest block KVM: arm64: Work out supported block level at compile time -
Jason A. Donenfeld authored
This reverts commit 72a95859. It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances, which use the syscon driver. Little-endian is not effected, which means likely it's important to handle regmap_get_val_endian() in this function after all. Fixes: 72a95859 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()") Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Lee Jones <lee@kernel.org> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Fix raw data handling when perf events are used in bpf - Rework how SIGTRAPs get delivered to events to address a bunch of problems with it. Add a selftest for that too * tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bpf: Fix sample_flags for bpf_perf_event_output selftests/perf_events: Add a SIGTRAP stress test with disables perf: Fix missing SIGTRAPs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Adjust code to not trip up CFI - Fix sched group cookie matching * tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Introduce struct balance_callback to avoid CFI mismatches sched/core: Fix comparison in sched_group_cookie_match()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: - Fix ORC stack unwinding when GCOV is enabled * tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unreliable stack dump with gcov
-
