- 09 Feb, 2024 40 commits
-
-
Paolo Abeni authored
The altnames test uses the forwarding/lib.sh and that dependency currently causes failures when running the test after install: make -C tools/testing/selftests/ TARGETS=net install ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:altnames.sh # ... # ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory # RTNETLINK answers: Operation not permitted # ./altnames.sh: line 73: tests_run: command not found # ./altnames.sh: line 65: pre_cleanup: command not found Address the issue leveraging the TEST_INCLUDES infrastructure provided by commit 2a0683be ("selftests: Introduce Makefile variable to list shared bash scripts") Signed-off-by:Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Ntuple and RSS updates This patch series adds more ntuple and RSS features following recent patches to add support for user configured ntuple filters. Additional features include L2 ether filters, partial tuple masks, IP filters besides TCP/UDP, drop action, saving and re-applying user filters after driver reset, user configured RSS key, and RSS for IPSEC. ==================== Link: https://lore.kernel.org/r/20240205223202.25341-1-michael.chan@broadcom.comSigned-off-by:
-
Ajit Khaparde authored
IPSec uses two distinct protocols, Authentication Header (AH) and Encapsulating Security Payload (ESP). Add support to configure RSS based on AH and ESP headers. This functionality will be enabled based on the capabilities indicated by the firmware in HWRM_VNIC_QCAPS. Signed-off-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-14-michael.chan@broadcom.comSigned-off-by:
-
Pavan Chebbi authored
The cached user filters slated to be reapplied need to be cleared if configured MAC changes, RSS key changes, number of rings changes, or ntuple is disabled. Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Pavan Chebbi authored
Store the user configured or generated Toeplitz key in bp->rss_hash_key. The key stays constant across ifdown/ifup unless updated by the user. Signed-off-by:
-
Pavan Chebbi authored
Walk the usr_fltr_list and call firmware to add these filters when we open the NIC. This will restore all user created filters after reset. Reviewed-by:
-
Pavan Chebbi authored
Driver should not free user created filters from its memory when closing since we are going to reconfigure them when we open again. If the "all" parameter is false, do not free user configured filters in bnxt_free_ntp_fltrs() and bnxt_free_l2_filters(). Reviewed-by:
-
Pavan Chebbi authored
Driver needs to maintain a lookup list of all the user configured filters. This is required in order to reconfigure these filters upon interface toggle. We can look up this list to follow the order with which they should be re-applied. Reviewed-by:
-
Pavan Chebbi authored
Since we are going to do filter deletion at multiple places in the upcoming patches, add a function that does the deletion. Future patches add more code into this function. Since we are passing the address of the filter base to free the entire filter structure, add a comment to make sure that the base is always at the beginning of the structure. Reviewed-by:
-
Vikas Gupta authored
Add drop action for protocols TCP/UDP/ICMP 1) Drop action for TCP/UDP is supported via flow type tcp4/udp4/tcp6/udp6. 2) Drop action for ICMPV4/ICMPV6/wildcard is supported via flow type ipv4/ipv6. Reviewed-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
Enable flow type ipv4/ipv6 1) for protocols ICMPV4 and ICMPV6. 2) for wildcard match. Wildcard matches to TCP/UDP/ICMP. Note that, IPPROTO_RAW(255) i.e. a reserved protocol considered for a wildcard. Reviewed-by:
-
Edwin Peer authored
Support subfield masking for IP addresses and ports. Previously, only entire fields could be included or excluded in NTUPLE filters. Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://lore.kernel.org/r/20240205223202.25341-5-michael.chan@broadcom.comSigned-off-by:
-
Michael Chan authored
Implement ETHTOOL_GRXCLSRULE for the user defined ether filters. Use the common functions to walk the L2 filter hash table. Reviewed-by:
-
Michael Chan authored
Add ETHTOOL_SRXCLSRLINS and ETHTOOL_SRXCLSRLDEL support for inserting and deleting L2 ether filter rules. Destination MAC address and optional VLAN are supported for each filter entry. This is currently only supported on older BCM573XX and BCM574XX chips only. Reviewed-by:
-
Michael Chan authored
While individual filter structures are allocated as needed, there is an array to keep track of the software filter IDs that we allocate ahead of time. Rather than relying on a fixed maximum filter count to allocate this array, get the maximum from the firmware when available. Move these filter related maximum counts queried from the firmware to the bnxt_hw_resc struct. If the firmware is not providing these maximum counts, fall back to the hard-coded constant. Reviewed-by:
-
Victor Nogueira authored
Add 8 new mirred tdc tests that target mirred to block: - Add mirred mirror to egress block action - Add mirred mirror to ingress block action - Add mirred redirect to egress block action - Add mirred redirect to ingress block action - Try to add mirred action with both dev and block - Try to add mirred action without specifying neither dev nor block - Replace mirred redirect to dev action with redirect to block - Replace mirred redirect to block action with mirror to dev Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240202020726.529170-1-victor@mojatatu.comSigned-off-by:
-
Markus Elfring authored
A wrapper function is available since the commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"). Thus reuse existing functionality instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Link: https://lore.kernel.org/r/f87065d0-e398-4ffa-bfa4-9ff99d73f206@web.deSigned-off-by:
-
Markus Elfring authored
A wrapper function is available since the commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"). Thus reuse existing functionality instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Ido Schimmel authored
The two tests that make use of multicast routig (router.sh and router_multicast.sh) are currently failing in the netdev CI because the kernel is missing multicast routing support. Fix by adding the required config entries. Fixes: 6d4efada ("selftests: forwarding: Add multicast routing test") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240208165538.1303021-1-idosch@nvidia.comSigned-off-by:
-
Jakub Kicinski authored
Merge netdev bits of io_uring busy polling support. Jens Axboe says: ==================== io_uring: add napi busy polling support I finally got around to testing this patchset in its current form, and results look fine to me. It Works. Using the basic ping/pong test that's part of the liburing addition, without enabling NAPI I get: Stock settings, no NAPI, 100k packets: rtt(us) min/avg/max/mdev = 31.730/37.006/87.960/0.497 and with -t10 -b enabled: rtt(us) min/avg/max/mdev = 23.250/29.795/63.511/1.203 In short, this patchset enables per io_uring NAPI enablement, rather than need to enable that globally. This allows targeted NAPI usage with io_uring. Here's Stefan's v15 posting, which predates this one: https://lore.kernel.org/io-uring/20230608163839.2891748-1-shr@devkernel.io/ ==================== Link: https://lore.kernel.org/r/20240206163422.646218-1-axboe@kernel.dkSigned-off-by:
-
Stefan Roesch authored
This adds the napi_busy_loop_rcu() function. This function assumes that the calling function is already holding the rcu read lock and napi_busy_loop() does not need to take the rcu read lock. Add a NAPI_F_NO_SCHED flag, which tells __napi_busy_loop() to abort if we need to reschedule rather than drop the RCU read lock and reschedule. Signed-off-by:
Stefan Roesch <shr@devkernel.io> Link: https://lore.kernel.org/r/20230608163839.2891748-3-shr@devkernel.ioSigned-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Stefan Roesch authored
This splits off the key part of the napi_busy_poll function into its own function, __napi_busy_poll, and changes the prefer_busy_poll bool to be flag based to allow passing in more flags in the future. This is done in preparation for an additional napi_busy_poll() function, that doesn't take the rcu_read_lock(). The new function is introduced in the next patch. Signed-off-by:
-
David S. Miller authored
Jinjian Song says: ==================== net: wwan: t7xx: Add fastboot interface Add support for t7xx WWAN device firmware flashing & coredump collection using fastboot interface. Using fastboot protocol command through /dev/wwan0fastboot0 WWAN port to support firmware flashing and coredump collection, userspace get device mode from /sys/bus/pci/devices/${bdf}/t7xx_mode. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jinjian Song authored
On early detection of wwan device in fastboot mode, driver sets up CLDMA0 HW tx/rx queues for raw data transfer and then create fastboot port to userspace. Application can use this port to flash firmware and collect core dump by fastboot protocol commands. E.g., flash firmware through fastboot port: - "download:%08x": write data to memory with the download size. - "flash:%s": write the previously downloaded image to the named partition. - "reboot": reboot the device. Link: https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.mdSigned-off-by:
Jinjian Song <jinjian.song@fibocom.com> Signed-off-by:
-
Jinjian Song authored
To support cases such as FW update or Core dump, the t7xx device is capable of signaling the host that a special port needs to be created before the handshake phase. Adds the infrastructure required to create the early ports which also requires a different configuration of CLDMA queues. Base on the v5 patch version of follow series: 'net: wwan: t7xx: fw flashing & coredump support' (https://patchwork.kernel.org/project/netdevbpf/patch/3777bb382f4b0395cb594a602c5c79dbab86c9e0.1674307425.git.m.chetan.kumar@linux.intel.com/) Signed-off-by:
-
Jinjian Song authored
Add support for userspace to get/set the device mode, device's state machine changes between (unknown/ready/reset/fastboot). Get the device state mode: - 'cat /sys/bus/pci/devices/${bdf}/t7xx_mode' Set the device state mode: - reset(cold reset): 'echo reset > /sys/bus/pci/devices/${bdf}/t7xx_mode' - fastboot: 'echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode' Reload driver to get the new device state after setting operation. Signed-off-by: -
Jinjian Song authored
Add a new WWAN port that connects to the device fastboot protocol interface. Signed-off-by:
-
David S. Miller authored
Matthew Wood says: ==================== netconsole: Add userdata append support Add the ability to add custom userdata to every outbound netconsole message as a collection of key/value pairs, allowing users to add metadata to every netconsole message which can be used for for tagging, filtering, and aggregating log messages. In a previous patch series the ability to prepend the uname release was added towards the goals above. This patch series builds on that idea to allow any userdata, keyed by a user provided name, to be included in netconsole messages. If CONFIG_NETCONSOLE_DYNAMIC is enabled an additional userdata directory will be presented in the netconsole configfs tree, allowing the addition of userdata entries. /sys/kernel/config/netconsole/ <target>/ enabled release dev_name local_port remote_port local_ip remote_ip local_mac remote_mac userdata/ <key>/ value <key>/ value ... v1->v2: * Updated netconsole_target docs, kdoc is now clean v2->v3: * Remove inline keyword from to_userdat* functions * Break up some lines that exceeded 80 chars * Replace typos and remove {} from single line if statement * Remove unused variable Testing for this series is as follows: Build every patch without CONFIG_NETCONSOLE_DYNAMIC, and also built with CONFIG_NETCONSOLE_DYNAMIC enabled for every patch after the config option was added Test Userdata configfs # Adding userdata cd /sys/kernel/config/netconsole/ && mkdir cmdline0 && cd cmdline0 mkdir userdata/release && echo hotfix1 > userdata/release/value preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail mkdir userdata/testing && echo something > userdata/testing/value preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'release=hotfix1\ntesting=something' ]] && echo pass || echo fail # # Removing Userdata rmdir userdata/testing preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail rmdir userdata/release preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done) [[ "$preview" == $'' ]] && echo pass || echo fail # # Adding userdata key with too large of 6.7.0-rc8-virtme,12,481,17954104,-directory name [<54 chars] mkdir userdata/testing12345678901234567890123456789012345678901234567890 [[ $? == 1 ]] && echo pass || echo fail # # Adding userdata value with too large of value [<200 chars] mkdir userdata/testing echo `for i in {1..201};do printf "%s" "v";done` > userdata/testing/value [[ $? == 1 ]] && echo pass || echo fail rmdir userdata/testing - Output: pass pass pass pass pass mkdir: cannot create directory ‘cmdline0/userdata/testing12345678901234567890123456789012345678901234567890’: File name too long pass bash: echo: write error: Message too long pass Test netconsole messages (w/ msg fragmentation) echo `for i in {1..996};do printf "%s" "v";done` > /dev/kmsg - Output: 6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=0/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=952/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Test empty userdatum cd /sys/kernel/config/netconsole/ && mkdir cmdline0 mkdir cmdline0/userdata/empty echo test > /dev/kmsg rmdir cmdline0/userdata/empty - Output: Test netconsole messages (w/o userdata fragmentation) cd /sys/kernel/config/netconsole/ && mkdir cmdline0 mkdir cmdline0/userdata/release && echo hotfix1 > cmdline0/userdata/release/value mkdir cmdline0/userdata/testing && echo something > cmdline0/userdata/testing/value echo test > /dev/kmsg rmdir cmdline0/userdata/release rmdir cmdline0/userdata/testing ==================== Signed-off-by: -
Matthew Wood authored
Regardless of whether the original message body or formatted userdata exceeds the MAX_PRINT_CHUNK, append userdata to the netconsole message starting with the first chunk that has available space after writing the body. Co-developed-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Matthew Wood <thepacketgeek@gmail.com> Signed-off-by:
-
Matthew Wood authored
Append userdata to outgoing unfragmented (<1000 bytes) netconsole messages. When sending messages the userdata string is already formatted and stored in netconsole_target->userdata_complete. Always write the outgoing message to buf, so userdata can be appended in a standard fashion. This is a change from only using buf when the release needs to be prepended to the message. Co-developed-by:
-
Matthew Wood authored
Store a formatted string for userdata that will be appended to netconsole messages. The string has a capacity of 4KB, as calculated by the userdatum entry length of 256 bytes and a max of 16 userdata entries. Update the stored netconsole_target->userdata_complete string with the new formatted userdata values when a userdatum is created, edited, or removed. Each userdata entry contains a trailing newline, which will be formatted as such in netconsole messages:: 6.7.0-rc8-virtme,12,500,1646292204,-;test release=foo something=bar 6.7.0-rc8-virtme,12,500,1646292204,-;another test release=foo something=bar Enforcement of MAX_USERDATA_ITEMS is done in userdatum_make_item; update_userdata will not check for this case but will skip any userdata children over the limit of MAX_USERDATA_ITEMs. If a userdata entry/dir is created but no value is provided, that entry will be skipped. This is in part because update_userdata() can't be called in userdatum_make_item() since the item will not have been added to the userdata config_group children yet. To preserve the experience of adding an empty userdata that doesn't show up in the netconsole messages, purposefully skip empty userdata items even when update_userdata() can be called. Co-developed-by: -
Matthew Wood authored
Create configfs machinery for netconsole userdata appending, which depends on CONFIG_NETCONSOLE_DYNAMIC (for configfs interface). Add a userdata config_group to netconsole_target for managing userdata entries as a tree under the netconsole configfs subsystem. Directory names created under the userdata directory become userdatum keys; the userdatum value is the content of the value file. Include the minimum-viable-changes for userdata configfs config_group. init_target_config_group() ties in the complete configfs machinery to avoid unused func/variable errors during build. Initializing the netconsole_target->group is moved to init_target_config_group, which will also init and add the userdata config_group. Each userdatum entry has a limit of 256 bytes (54 for the key/directory, 200 for the value, and 2 for '=' and '\n' characters), which is enforced by the configfs functions for updating the userdata config_group. When a new netconsole_target is created, initialize the userdata config_group and add it as a default group for netconsole_target config_group, allowing the userdata configfs sub-tree to be presented in the netconsole configfs tree under the userdata directory. Co-developed-by:
-
Matthew Wood authored
Add a new User Data section to the netconsole docs to describe the appending of user data capability (for netconsole dynamic configuration) with usage and netconsole output examples. Co-developed-by:
-
Matthew Wood authored
Move newline trimming logic from `dev_name_store()` to a new function (trim_newline()) for shared use in netconsole.c Signed-off-by:
-
Matthew Wood authored
In order to support a nested userdata config_group in later patches, use a config_group for netconsole_target instead of a config_item. It's a no-op functionality-wise, since config_group maintains all features of a config_item via the cg_item member. Signed-off-by:
-
Matthew Wood authored
Address checkpatch lint suggestions in preparation for later changes Signed-off-by:
-
Eric Dumazet authored
for_each_netdev_dump() can be used with RCU protection, no need for rtnl if we are going to use dev_hold()/dev_put(). Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240207153514.3640952-1-edumazet@google.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-06 (ixgbe) This series contains updates to ixgbe driver only. Jedrzej continues cleanup work from conversion away from ixgbe_status; s32 values are changed to int, various style issues are addressed, and some return statements refactored to address some smatch warnings. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbe: Clarify the values of the returning status ixgbe: Rearrange args to fix reverse Christmas tree ixgbe: Convert ret val type from s32 to int ==================== Link: https://lore.kernel.org/r/20240206214054.1002919-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Biju Das says: ==================== Add HW checksum offload support for RZ/G2L GbEthernet IP This patch series aims to add HW checksum offload supported by TOE module found on the RZ/G2L Gb ethernet IP. TOE has hardware support for calculating IP header and TCP/UDP/ICMP checksum for both IPv4 and IPv6. For Rx, the 4-byte result of checksum calculation is attached to the Ethernet frames.First 2-bytes is result of IPv4 header checksum and next 2-bytes is TCP/UDP/ICMP checksum. If a frame does not have checksum error, 0x0000 is attached as checksum calculation result. For unsupported frames 0xFFFF is attached as checksum calculation result. In case of an IPv6 packet, IPv4 checksum is always set to 0xFFFF. For Tx, the result of checksum calculation is set to the checksum field of each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported frames, those fields are not changed. If a transmission frame is an UDPv4 frame and its checksum value in the UDP header field is 0x0000, TOE does not calculate checksum for UDP part of this frame as it is optional function as per standards. Add Tx/Rx checksum offload supported by TOE for IPv4 and TCP/UDP protocols. Results of iperf3 in Mbps RZ/V2L: TCP(Tx/Rx) results with checksum offload Enabled: {921,932} TCP(Tx/Rx) results with checksum offload Disabled: {867,612} UDP(Tx/Rx) results with checksum offload Enabled: {950,946} UDP(Tx/Rx) results with checksum offload Disabled: {952,920} RZ/G2L: TCP(Tx/Rx) results with checksum offload Enabled: {920,936} TCP(Tx/Rx) results with checksum offload Disabled: {871,626} UDP(Tx/Rx) results with checksum offload Enabled: {953,950} UDP(Tx/Rx) results with checksum offload Disabled: {954,920} RZ/G2LC: TCP(Tx/Rx) results with checksum offload Enabled: {927,936} TCP(Tx/Rx) results with checksum offload Disabled: {889,626} UDP(Tx/Rx) results with checksum offload Enabled: {950,946} UDP(Tx/Rx) results with checksum offload Disabled: {949,944} ==================== Link: https://lore.kernel.org/r/20240207092838.160627-1-biju.das.jz@bp.renesas.comSigned-off-by: -
Biju Das authored
TOE has hardware support for calculating IP header and TCP/UDP/ICMP checksum for both IPv4 and IPv6. Add Tx checksum offload supported by TOE for IPv4 and TCP/UDP. For Tx, the result of checksum calculation is set to the checksum field of each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported frames, those fields are not changed. If a transmission frame is an UDPv4 frame and its checksum value in the UDP header field is 0x0000, TOE does not calculate checksum for UDP part of this frame as it is optional function as per standards. We can test this functionality by the below commands ethtool -K eth0 tx on --> to turn on Tx checksum offload ethtool -K eth0 tx off --> to turn off Tx checksum offload Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240207092838.160627-3-biju.das.jz@bp.renesas.comSigned-off-by:
-
