The procfs file is completely unused without CONFIG_PROC_FS but causes
a compile time warning:

drivers/isdn/capi/kcapi_proc.c:97:36: error: unused variable 'seq_controller_ops' [-Werror,-Wunused-const-variable]
static const struct seq_operations seq_controller_ops = {
drivers/isdn/capi/kcapi_proc.c:104:36: error: unused variable 'seq_contrstats_ops' [-Werror,-Wunused-const-variable]
drivers/isdn/capi/kcapi_proc.c:179:36: error: unused variable 'seq_applications_ops' [-Werror,-Wunused-const-variable]
drivers/isdn/capi/kcapi_proc.c:186:36: error: unused variable 'seq_applstats_ops' [-Werror,-Wunused-const-variable]

Remove the file from the build in that config and make the calls into
it conditional instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-27-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This has never been used since the start of the git history. When building
with W=1, the unused variable produces a gcc warning:

drivers/net/ethernet/3com/3c515.c:35:18: error: 'mtu' defined but not used [-Werror=unused-const-variable=]

Just remove it.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-6-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

For 2 out of 3 of these changes we can simply swap in strscpy() as it
guarantess NUL-termination which is needed for the following trace
print.

trace_rpcgss_context() should use memcpy as its format specifier %.*s
allows for the length to be specifier (__entry->len). Due to this,
acceptor does not technically need to be NUL-terminated. Moreover,
swapping in strscpy() and keeping everything else the same could result
in truncation of the source string by one byte. To remedy this, we could
use `len + 1` but I am unsure of the size of the destination buffer so a
simple memcpy should suffice.
|	TP_printk("win_size=%u expiry=%lu now=%lu timeout=%u acceptor=%.*s",
|		__entry->window_size, __entry->expiry, __entry->now,
|		__entry->timeout, __entry->len, __get_str(acceptor))

I suspect acceptor not to naturally be a NUL-terminated string due to
the presence of some stringify methods.
|	.crstringify_acceptor	= gss_stringify_acceptor,

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240401-strncpy-include-trace-events-mdio-h-v1-1-9cb5a4cda116@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tariq Toukan says:

====================
mlx5e rc2 misc patches (part)

This patchset includes small features and a cleanup for the mlx5e driver.

Patches 1-2 by Cosmin implements FEC settings for 100G/lane modes.

Patch 3 is a simple cleanup.
====================

Link: https://lore.kernel.org/r/20240404173357.123307-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Un-expose functions that are not used outside of their c file.
Make them static.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240404173357.123307-6-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This consists of:
1. Expose the 100G/lane capability bit in the PCAM reg.
2. Expose the per link mode FEC capability masks in the PPLM reg.
3. Set the overrides according to ethtool parameters.
FEC for new modes is set if and only if the PCAM 100G/lane capability is
advertised and the capability mask for a given link mode reports that it
can accept the requested FEC mode.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240404173357.123307-3-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The check of whether a given FEC mode is supported in a given link mode
is about to get more complicated, so extract it in a separate function
to avoid code duplication.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240404173357.123307-2-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the correct tmo_us microsecond parameter for the PTP firmware
timeout parameter.

Fixes: 7de3c221 ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Reported-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240404195500.171071-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Oleksij Rempel says:

====================
net: dsa: microchip: ksz8: refactor FDB dump path

Refactor FDB dump code path for Microchip KSZ8xxx series. This series
mostly makes some cosmetic reworks and allows to forward errors detected
by the regmap.

Change logs are part of patch commit messages.
====================

Link: https://lore.kernel.org/r/20240403125039.3414824-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We already have a variable to provide number of entries. So use it,
instead of using error number.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-9-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The read/write path may fail. So, return error if we got it.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-8-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

EAGAIN was not used by previous code and not used by  current code. So,
remove it and use proper error value.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-7-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use 'ret' instead of 'rc' in ksz8_r_dyn_mac_table() to maintain
consistency with the rest of the file.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-6-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move the code out of a long if statement scope in ksz8_r_dyn_mac_table()
to improve code readability.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-5-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Refactor ksz8_fdb_dump() to address potential issues:
- Limit the number of iterations to avoid endless loops.
- Handle error codes returned by ksz8_r_dyn_mac_table(), with
  an exception for -ENXIO when no more dynamic entries are detected.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-4-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ksz8_r_dyn_mac_table() is not used outside the source file. Make it
static.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-3-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The FDB timestamps are not being utilized. This commit removes the
unused timestamp support from ksz8_r_dyn_mac_table() function.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-2-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tan Chun Hau says:

====================
Add StarFive JH8100 dwmac support

Add StarFive JH8100 dwmac support.
The JH8100 dwmac shares the same driver code as the JH7110 dwmac
and has only one reset signal.

Please refer to below:

  JH8100: reset-names = "stmmaceth";
  JH7110: reset-names = "stmmaceth", "ahb";
  JH7100: reset-names = "ahb";

Example usage of JH8100 in the device tree:

gmac0: ethernet@16030000 {
        compatible = "starfive,jh8100-dwmac",
                     "starfive,jh7110-dwmac",
                     "snps,dwmac-5.20";
        ...
};

Changes in v6:
- Removed unnecessary enum "starfive,jh8100-dwmac".
====================

Link: https://lore.kernel.org/r/20240403100549.78719-1-chunhau.tan@starfivetech.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add StarFive JH8100 dwmac support.
The JH8100 dwmac shares the same driver code as the JH7110 dwmac
and has only one reset signal.

Please refer to below:

  JH8100: reset-names = "stmmaceth";
  JH7110: reset-names = "stmmaceth", "ahb";
  JH7100: reset-names = "ahb";

Example usage of JH8100 in the device tree:

gmac0: ethernet@16030000 {
        compatible = "starfive,jh8100-dwmac",
                     "starfive,jh7110-dwmac",
                     "snps,dwmac-5.20";
        ...
};
Signed-off-by: Tan Chun Hau <chunhau.tan@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240403100549.78719-2-chunhau.tan@starfivetech.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

net/ipv4/ip_gre.c
  17af4205 ("erspan: make sure erspan_base_hdr is present in skb->head")
  5832c4a7 ("ip_tunnel: convert __be16 tunnel flags to bitmaps")
https://lore.kernel.org/all/20240402103253.3b54a1cf@canb.auug.org.au/

Adjacent changes:

net/ipv6/ip6_fib.c
  d21d4060 ("ipv6: Fix infinite recursion in fib6_dump_done().")
  5fc68320 ("ipv6: remove RTNL protection from inet6_dump_fib()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bluetooth and bpf.

  Fairly usual collection of driver and core fixes. The large selftest
  accompanying one of the fixes is also becoming a common occurrence.

  Current release - regressions:

   - ipv6: fix infinite recursion in fib6_dump_done()

   - net/rds: fix possible null-deref in newly added error path

  Current release - new code bugs:

   - net: do not consume a full cacheline for system_page_pool

   - bpf: fix bpf_arena-related file descriptor leaks in the verifier

   - drv: ice: fix freeing uninitialized pointers, fixing misuse of the
     newfangled __free() auto-cleanup

  Previous releases - regressions:

   - x86/bpf: fixes the BPF JIT with retbleed=stuff

   - xen-netfront: add missing skb_mark_for_recycle, fix page pool
     accounting leaks, revealed by recently added explicit warning

   - tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
     non-wildcard addresses

   - Bluetooth:
      - replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
        better workarounds to un-break some buggy Qualcomm devices
      - set conn encrypted before conn establishes, fix re-connecting to
        some headsets which use slightly unusual sequence of msgs

   - mptcp:
      - prevent BPF accessing lowat from a subflow socket
      - don't account accept() of non-MPC client as fallback to TCP

   - drv: mana: fix Rx DMA datasize and skb_over_panic

   - drv: i40e: fix VF MAC filter removal

  Previous releases - always broken:

   - gro: various fixes related to UDP tunnels - netns crossing
     problems, incorrect checksum conversions, and incorrect packet
     transformations which may lead to panics

   - bpf: support deferring bpf_link dealloc to after RCU grace period

   - nf_tables:
      - release batch on table validation from abort path
      - release mutex after nft_gc_seq_end from abort path
      - flush pending destroy work before exit_net release

   - drv: r8169: skip DASH fw status checks when DASH is disabled"

* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
  netfilter: validate user input for expected length
  net/sched: act_skbmod: prevent kernel-infoleak
  net: usb: ax88179_178a: avoid the interface always configured as random address
  net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
  net: ravb: Always update error counters
  net: ravb: Always process TX descriptor ring
  netfilter: nf_tables: discard table flag update with pending basechain deletion
  netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
  netfilter: nf_tables: reject new basechain after table flag update
  netfilter: nf_tables: flush pending destroy work before exit_net release
  netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
  netfilter: nf_tables: release batch on table validation from abort path
  Revert "tg3: Remove residual error handling in tg3_suspend"
  tg3: Remove residual error handling in tg3_suspend
  net: mana: Fix Rx DMA datasize and skb_over_panic
  net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
  net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
  net: stmmac: fix rx queue priority assignment
  net: txgbe: fix i2c dev name cannot match clkdev
  net: fec: Set mac_managed_pm during probe
  ...

Pull bcachefs repair code from Kent Overstreet:
 "A couple more small fixes, and new repair code.

  We can now automatically recover from arbitrary corrupted interior
  btree nodes by scanning, and we can reconstruct metadata as needed to
  bring a filesystem back into a working, consistent, read-write state
  and preserve access to whatevver wasn't corrupted.

  Meaning - you can blow away all metadata except for extents and
  dirents leaf nodes, and repair will reconstruct everything else and
  give you your data, and under the correct paths. If inodes are missing
  i_size will be slightly off and permissions/ownership/timestamps will
  be gone, and we do still need the snapshots btree if snapshots were in
  use - in the future we'll be able to guess the snapshot tree structure
  in some situations.

  IOW - aside from shaking out remaining bugs (fuzz testing is still
  coming), repair code should be complete and if repair ever doesn't
  work that's the highest priority bug that I want to know about
  immediately.

  This patchset was kindly tested by a user from India who accidentally
  wiped one drive out of a three drive filesystem with no replication on
  the family computer - it took a couple weeks but we got everything
  important back"

* tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: reconstruct_inode()
  bcachefs: Subvolume reconstruction
  bcachefs: Check for extents that point to same space
  bcachefs: Reconstruct missing snapshot nodes
  bcachefs: Flag btrees with missing data
  bcachefs: Topology repair now uses nodes found by scanning to fill holes
  bcachefs: Repair pass for scanning for btree nodes
  bcachefs: Don't skip fake btree roots in fsck
  bcachefs: bch2_btree_root_alloc() -> bch2_btree_root_alloc_fake()
  bcachefs: Etyzinger cleanups
  bcachefs: bch2_shoot_down_journal_keys()
  bcachefs: Clear recovery_passes_required as they complete without errors
  bcachefs: ratelimit informational fsck errors
  bcachefs: Check for bad needs_discard before doing discard
  bcachefs: Improve bch2_btree_update_to_text()
  mean_and_variance: Drop always failing tests
  bcachefs: fix nocow lock deadlock
  bcachefs: BCH_WATERMARK_interior_updates
  bcachefs: Fix btree node reserve

Daniel Borkmann says:

====================
pull-request: bpf 2024-04-04

We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).

The main changes are:

1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
   incorrect destination IP calculation and incorrect IP for relocations,
   from Uros Bizjak and Joan Bruguera Micó.

2) Fix BPF arena file descriptor leaks in the verifier,
   from Anton Protopopov.

3) Defer bpf_link deallocation to after RCU grace period as currently
   running multi-{kprobes,uprobes} programs might still access cookie
   information from the link, from Andrii Nakryiko.

4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
   by syzkaller, from Jakub Sitnicki.

5) Fix resolve_btfids build with musl libc due to missing linux/types.h
   include, from Natanael Copa.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Prevent lock inversion deadlock in map delete elem
  x86/bpf: Fix IP for relocating call depth accounting
  x86/bpf: Fix IP after emitting call depth accounting
  bpf: fix possible file descriptor leaks in verifier
  tools/resolve_btfids: fix build with musl libc
  bpf: support deferring bpf_link dealloc to after RCU grace period
  bpf: put uprobe link's path and task in release callback
====================

Link: https://lore.kernel.org/r/20240404183258.4401-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
selftests: net: groundwork for YNL-based tests (YNL prep)

v1: https://lore.kernel.org/all/20240402010520.1209517-1-kuba@kernel.org/
====================

Merge the non-controversial YNL adjustment and spec additions.

Link: https://lore.kernel.org/r/20240403023426.1762996-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Typing e.nl_msg.error when processing exception is a bit tedious
and counter-intuitive. Set a local .error member to the positive
value of the netlink level error.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-3-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When interfacing with the ethtool commands it's handy to
be able to use the names of the flags. Example:

    ethnl.pause_get({"header": {"dev-index": cfg.ifindex,
                                "flags": {'stats'}}})

Note that not all commands accept all the flags,
but the meaning of the bits does not change command
to command.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I got multiple syzbot reports showing old bugs exposed
by BPF after commit 20f2505f ("bpf: Try to avoid kzalloc
in cgroup/{s,g}etsockopt")

setsockopt() @optlen argument should be taken into account
before copying data.

 BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
 BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
 BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline]
 BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627
Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238

CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
  __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
  copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
  copy_from_sockptr include/linux/sockptr.h:55 [inline]
  do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline]
  do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627
  nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101
  do_sock_setsockopt+0x3af/0x720 net/socket.c:2311
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
 do_syscall_64+0xfb/0x240
 entry_SYSCALL_64_after_hwframe+0x72/0x7a
RIP: 0033:0x7fd22067dde9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9
RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8
 </TASK>

Allocated by task 7238:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
  __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
  kasan_kmalloc include/linux/kasan.h:211 [inline]
  __do_kmalloc_node mm/slub.c:4069 [inline]
  __kmalloc_noprof+0x200/0x410 mm/slub.c:4082
  kmalloc_noprof include/linux/slab.h:664 [inline]
  __cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869
  do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
 do_syscall_64+0xfb/0x240
 entry_SYSCALL_64_after_hwframe+0x72/0x7a

The buggy address belongs to the object at ffff88802cd73da0
 which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
 allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1)

The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73
flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff)
page_type: 0xffffefff(slab)
raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122
raw: ffff88802cd73020 000000008080007f 00000001ffffefff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5103, tgid 2119833701 (syz-executor.4), ts 5103, free_ts 70804600828
  set_page_owner include/linux/page_owner.h:32 [inline]
  post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1490
  prep_new_page mm/page_alloc.c:1498 [inline]
  get_page_from_freelist+0x2e7e/0x2f40 mm/page_alloc.c:3454
  __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4712
  __alloc_pages_node_noprof include/linux/gfp.h:244 [inline]
  alloc_pages_node_noprof include/linux/gfp.h:271 [inline]
  alloc_slab_page+0x5f/0x120 mm/slub.c:2249
  allocate_slab+0x5a/0x2e0 mm/slub.c:2412
  new_slab mm/slub.c:2465 [inline]
  ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3615
  __slab_alloc+0x58/0xa0 mm/slub.c:3705
  __slab_alloc_node mm/slub.c:3758 [inline]
  slab_alloc_node mm/slub.c:3936 [inline]
  __do_kmalloc_node mm/slub.c:4068 [inline]
  kmalloc_node_track_caller_noprof+0x286/0x450 mm/slub.c:4089
  kstrdup+0x3a/0x80 mm/util.c:62
  device_rename+0xb5/0x1b0 drivers/base/core.c:4558
  dev_change_name+0x275/0x860 net/core/dev.c:1232
  do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2864
  __rtnl_newlink net/core/rtnetlink.c:3680 [inline]
  rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3727
  rtnetlink_rcv_msg+0x89b/0x10d0 net/core/rtnetlink.c:6594
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2559
  netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
page last free pid 5146 tgid 5146 stack trace:
  reset_page_owner include/linux/page_owner.h:25 [inline]
  free_pages_prepare mm/page_alloc.c:1110 [inline]
  free_unref_page+0xd3c/0xec0 mm/page_alloc.c:2617
  discard_slab mm/slub.c:2511 [inline]
  __put_partials+0xeb/0x130 mm/slub.c:2980
  put_cpu_partial+0x17c/0x250 mm/slub.c:3055
  __slab_free+0x2ea/0x3d0 mm/slub.c:4254
  qlink_free mm/kasan/quarantine.c:163 [inline]
  qlist_free_all+0x9e/0x140 mm/kasan/quarantine.c:179
  kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286
  __kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:322
  kasan_slab_alloc include/linux/kasan.h:201 [inline]
  slab_post_alloc_hook mm/slub.c:3888 [inline]
  slab_alloc_node mm/slub.c:3948 [inline]
  __do_kmalloc_node mm/slub.c:4068 [inline]
  __kmalloc_node_noprof+0x1d7/0x450 mm/slub.c:4076
  kmalloc_node_noprof include/linux/slab.h:681 [inline]
  kvmalloc_node_noprof+0x72/0x190 mm/util.c:634
  bucket_table_alloc lib/rhashtable.c:186 [inline]
  rhashtable_rehash_alloc+0x9e/0x290 lib/rhashtable.c:367
  rht_deferred_worker+0x4e1/0x2440 lib/rhashtable.c:427
  process_one_work kernel/workqueue.c:3218 [inline]
  process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299
  worker_thread+0x86d/0xd70 kernel/workqueue.c:3380
  kthread+0x2f0/0x390 kernel/kthread.c:388
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243

Memory state around the buggy address:
 ffff88802cd73c80: 07 fc fc fc 05 fc fc fc 05 fc fc fc fa fc fc fc
 ffff88802cd73d00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
>ffff88802cd73d80: fa fc fc fc 01 fc fc fc fa fc fc fc fa fc fc fc
                               ^
 ffff88802cd73e00: fa fc fc fc fa fc fc fc 05 fc fc fc 07 fc fc fc
 ffff88802cd73e80: 07 fc fc fc 07 fc fc fc 07 fc fc fc 07 fc fc fc

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240404122051.2303764-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 unlike early commit path stage which triggers a call to abort,
         an explicit release of the batch is required on abort, otherwise
         mutex is released and commit_list remains in place.

Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise
         async GC worker could collect expired objects.

Patch #3 flush pending destroy work in module removal path, otherwise UaF
         is possible.

Patch #4 and #6 restrict the table dormant flag with basechain updates
	 to fix state inconsistency in the hook registration.

Patch #5 adds missing RCU read side lock to flowtable type to avoid races
	 with module removal.

* tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: discard table flag update with pending basechain deletion
  netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
  netfilter: nf_tables: reject new basechain after table flag update
  netfilter: nf_tables: flush pending destroy work before exit_net release
  netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
  netfilter: nf_tables: release batch on table validation from abort path
====================

Link: https://lore.kernel.org/r/20240404104334.1627-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-04-03 (ice, idpf)

This series contains updates to ice and idpf drivers.

Dan Carpenter initializes some pointer declarations to NULL as needed for
resource cleanup on ice driver.

Petr Oros corrects assignment of VLAN operators to fix Rx VLAN filtering
in legacy mode for ice.

Joshua calls eth_type_trans() on unknown packets to prevent possible
kernel panic on idpf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  idpf: fix kernel panic on unknown packet types
  ice: fix enabling RX VLAN filtering
  ice: Fix freeing uninitialized pointers
====================

Link: https://lore.kernel.org/r/20240403201929.1945116-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found that tcf_skbmod_dump() was copying four bytes
from kernel stack to user space [1].

The issue here is that 'struct tc_skbmod' has a four bytes hole.

We need to clear the structure before filling fields.

[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
 BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
 BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
 BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
  instrument_copy_to_user include/linux/instrumented.h:114 [inline]
  copy_to_user_iter lib/iov_iter.c:24 [inline]
  iterate_ubuf include/linux/iov_iter.h:29 [inline]
  iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
  iterate_and_advance include/linux/iov_iter.h:271 [inline]
  _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
  copy_to_iter include/linux/uio.h:196 [inline]
  simple_copy_to_iter net/core/datagram.c:532 [inline]
  __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420
  skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546
  skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline]
  netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962
  sock_recvmsg_nosec net/socket.c:1046 [inline]
  sock_recvmsg+0x2c4/0x340 net/socket.c:1068
  __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242
  __do_sys_recvfrom net/socket.c:2260 [inline]
  __se_sys_recvfrom net/socket.c:2256 [inline]
  __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was stored to memory at:
  pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253
  netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317
  netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351
  nlmsg_unicast include/net/netlink.h:1144 [inline]
  nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610
  rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741
  rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline]
  tcf_add_notify net/sched/act_api.c:2048 [inline]
  tcf_action_add net/sched/act_api.c:2071 [inline]
  tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119
  rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595
  netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559
  rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613
  netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
  netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361
  netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  ____sys_sendmsg+0x877/0xb60 net/socket.c:2584
  ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
  __sys_sendmsg net/socket.c:2667 [inline]
  __do_sys_sendmsg net/socket.c:2676 [inline]
  __se_sys_sendmsg net/socket.c:2674 [inline]
  __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was stored to memory at:
  __nla_put lib/nlattr.c:1041 [inline]
  nla_put+0x1c6/0x230 lib/nlattr.c:1099
  tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256
  tcf_action_dump_old net/sched/act_api.c:1191 [inline]
  tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227
  tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251
  tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628
  tcf_add_notify_msg net/sched/act_api.c:2023 [inline]
  tcf_add_notify net/sched/act_api.c:2042 [inline]
  tcf_action_add net/sched/act_api.c:2071 [inline]
  tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119
  rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595
  netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559
  rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613
  netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
  netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361
  netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  ____sys_sendmsg+0x877/0xb60 net/socket.c:2584
  ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
  __sys_sendmsg net/socket.c:2667 [inline]
  __do_sys_sendmsg net/socket.c:2676 [inline]
  __se_sys_sendmsg net/socket.c:2674 [inline]
  __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Local variable opt created at:
  tcf_skbmod_dump+0x9d/0xc20 net/sched/act_skbmod.c:244
  tcf_action_dump_old net/sched/act_api.c:1191 [inline]
  tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227

Bytes 188-191 of 248 are uninitialized
Memory access of size 248 starts at ffff888117697680
Data copied to user address 00007ffe56d855f0

Fixes: 86da71b5 ("net_sched: Introduce skbmod action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240403130908.93421-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After the commit d2689b6a ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset is not executed from bind operation and
mac address is not read from the device registers or the devicetree at that
moment. Since the check to configure if the assigned mac address is random
or not for the interface, happens after the bind operation from
usbnet_probe, the interface keeps configured as random address, although the
address is correctly read and set during open operation (the only reset
now).

In order to keep only one reset for the device and to avoid the interface
always configured as random address, after reset, configure correctly the
suitable field from the driver, if the mac address is read successfully from
the device registers or the devicetree. Take into account if a locally
administered address (random) was previously stored.

cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Dave Stevenson  <dave.stevenson@raspberrypi.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pavan Chebbi says:

====================
bnxt_en: Update for net-next

This patchset contains the following updates to bnxt:

- Patch 1 supports handling Downstream Port Containment (DPC) AER
on older chipsets

- Patch 2 enables XPS by default on driver load

- Patch 3 optimizes page pool allocation for numa nodes

- Patch 4 & 5 add support for XDP metadata

- Patch 6 updates firmware interface

- Patch 7 adds a warning about limitations on certain transceivers
====================

Link: https://lore.kernel.org/r/20240402093753.331120-1-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some chips may not allow changing default speed when dual rate
transceivers modules are used. Firmware on those chips will
indicate the same to the driver.

Add a warning message when speed change is not supported
because a dual rate transceiver is detected by the NIC.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-8-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This updated interface supports backing store APIs to
configure host FW trace buffers, updates transceivers ID
types, updates to TrueFlow features and other changes
for the basic L2 features.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-7-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

- Change the last arg to xdp_prepare_buff to true from false.
- Ensure that when XDP_PASS is returned the xdp->data_meta area
is copied to the skb->data area. Account for the meta data
size on skb allocation and do a pull after to move it to the
"reserved" zone.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-6-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change bnxt_rx_xdp() to take a pointer to xdp instead of stack
variable.
This is in prepartion for the XDP metadata patch change where
the BPF program can change the value of the xdp.meta_data.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-5-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Driver's Page Pool allocation code looks at the node local
to the PCIe device to determine where to allocate memory.
In scenarios where the core count per NUMA node is low (< default rings)
it makes sense to exhaust page pool allocations on
Node 0 first and then moving on to allocating page pools
for the remaining rings from Node 1.

With this patch, and the following configuration on the NIC
$ ethtool -L ens1f0np0 combined 16
(core count/node = 12, first 12 rings on node#0, last 4 rings node#1)
and traffic redirected to a ring on node#1 , we see a performance
improvement of ~20%
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-4-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Enable XPS on default during NIC open. The choice of
Tx queue is based on the CPU executing the thread that
submits the Tx request. The pool of Tx queues will be
spread evenly across both device-attached NUMA nodes(local)
and remote NUMA nodes.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-3-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case of DPC, after issuing the hot reset, the
kernel waits for 100ms for the device to complete
the reset. However on some older chips, the firmware
may take up to 1 second to complete the reset, only
after which the driver can restart the card.

Introduce delay of 900ms to handle this scenario on
the older chipsets.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-2-pavan.chebbi@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In mtk_flow_entry_update_l2, the hwe->ib1 is read using READ_ONCE at the
beginning of the function, checked, and then re-read from hwe->ib1,
may void all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the ib1 throughout the function.
Signed-off-by: linke li <lilinke99@qq.com>
Link: https://lore.kernel.org/r/tencent_C699E9540505523424F11A9BD3D21B86840A@qq.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>