Return good group when it's found in loop to remove unnecessary NULL
initialization of grp and futher check if good group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-4-shikemeng@huaweicloud.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.

Fixes: 196e402a ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.

Fixes: 5354b2af ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Replace CR_FAST with ext4_mb_cr_expensive() inline function for better
readability. This function returns true if the criteria is one of the
expensive/slower ones where lots of disk IO/prefetching is acceptable.

No functional changes are intended in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230630085927.140137-1-ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The multi-mount protection kthread checks for read-only filesystem and
aborts in that case. The remount code actually handles stopping of the
kthread on remount so the only purpose of the check is in case of
emergency remount read-only. Replace the check for read-only filesystem
with a check for shutdown filesystem as running MMP on such is risky
anyway and it makes ordering of things during remount simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-11-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

JBD2 code will quickly return without doing anything when there's
nothing to commit so there's no point in the read-only check in
ext4_force_commit(). Just drop it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-10-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

We should not have dirty inodes on read-only filesystem. Also silently
bailing without writing anything would be a problem when we enable
quotas during remount while the filesystem is read-only. So drop the
read-only check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-9-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

We better should not be initializing inode tables on read-only
filesystem. The following transaction start will warn us and make the
function bail anyway so drop the pointless check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-8-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Now that filesystem abort marks the filesystem as shutdown, we shouldn't
be ever hitting the sb_rdonly() check in ext4_journal_check_start().
Since this is a suitable place for catching all sorts of programming
errors, convert the check to WARN_ON instead of dropping it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-7-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When the filesystem gets first remounted read-only and then unmounted,
ext4_quota_off() will try to start a transaction (and fail) on read-only
filesystem to cleanup inode flags for legacy quota files. Just bail
before trying to start a transaction instead since that is going to
issue a warning.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-6-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

EXT4_MF_FS_ABORTED flag has practically the same intent as
EXT4_FLAGS_SHUTDOWN flag. The shutdown flag is checked in many more
places than the aborted flag which is mostly the historical artifact
where we were relying on SB_RDONLY checks instead of the aborted flag
checks. There are only three places - ext4_sync_file(),
__ext4_remount(), and mballoc debug code - which check aborted flag and
not shutdown flag and this is arguably a bug. Avoid these
inconsistencies by removing EXT4_MF_FS_ABORTED flag and using
EXT4_FLAGS_SHUTDOWN everywhere.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-5-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

'abort' mount option is the only mount option that has special handling
and sets a bit in sbi->s_mount_flags. There is not strong reason for
that so just simplify the code and make 'abort' set a bit in
sbi->s_mount_opt2 as any other mount option. This simplifies the code
and will allow us to drop EXT4_MF_FS_ABORTED completely in the following
patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-4-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
struct super_block to save all callers from some boilerplate code. No
functional changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

sb_rdonly() helper instead of directly checking sb->s_flags.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-2-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

ext4_freeze() and ext4_unfreeze() checks for sb_rdonly(). However this
check is pointless as VFS already checks for read-only filesystem before
calling filesystem specific methods. Remove the pointless checks.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-1-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In jbd2_journal_load(), when journal_reset fails, it prints an incorrect
warn log.

Fix this by changing the goto statement to return statement.

Also, return actual error code from jbd2_journal_recover() and journal_reset().
Signed-off-by: Guoqing Cai <u202112087@hust.edu.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230413095740.2222066-1-u202112087@hust.edu.cnSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.

This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:

=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
 <TASK>
 ext4_mb_use_best_found+0x203/0x2f0
 ext4_mb_try_best_found+0x163/0x240
 ext4_mb_regular_allocator+0x158/0x1550
 ext4_mb_new_blocks+0x86a/0xe10
 ext4_ext_map_blocks+0xb0c/0x13a0
 ext4_map_blocks+0x2cd/0x8f0
 ext4_iomap_begin+0x27b/0x400
 iomap_iter+0x222/0x3d0
 __iomap_dio_rw+0x243/0xcb0
 iomap_dio_rw+0x16/0x80
=========================================================

A simple reproducer demonstrating the problem:

	mkfs.ext4 -F /dev/sda -b 4096 100M
	mount /dev/sda /tmp/test
	fallocate -l1M /tmp/test/tmp
	fallocate -l10M /tmp/test/file
	fallocate -i -o 1M -l16777203M /tmp/test/file
	fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
	sleep 10 && killall -9 fsstress
	rm -f /tmp/test/tmp
	xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"

We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.

Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.

Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull tracing fixes from Steven Rostedt:

 - Swapping the ring buffer for snapshotting (for things like irqsoff)
   can crash if the ring buffer is being resized. Disable swapping when
   this happens. The missed swap will be reported to the tracer

 - Report error if the histogram fails to be created due to an error in
   adding a histogram variable, in event_hist_trigger_parse()

 - Remove unused declaration of tracing_map_set_field_descr()

* tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/histograms: Return an error if we fail to add histogram to hist_vars list
  ring-buffer: Do not swap cpu_buffer during resize process
  tracing: Remove unused extern declaration tracing_map_set_field_descr()

Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix stale help text in gconfig

 - Support *.S files in compile_commands.json

 - Flatten KBUILD_CFLAGS

 - Fix external module builds with Rust so that temporary files are
   created in the modules directories instead of the kernel tree

* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rust: avoid creating temporary files
  kbuild: flatten KBUILD_CFLAGS
  gen_compile_commands: add assembly files to compilation database
  kconfig: gconfig: correct program name in help text
  kconfig: gconfig: drop the Show Debug Info help text

`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).

Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.

Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.

Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes: 295d8398 ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Avoid pKVM finalization if KVM initialization fails

   - Add missing BTI instructions in the hypervisor, fixing an early
     boot failure on BTI systems

   - Handle MMU notifiers correctly for non hugepage-aligned memslots

   - Work around a bug in the architecture where hypervisor timer
     controls have UNKNOWN behavior under nested virt

   - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
     BUG in cpu hotplug resulting from per-CPU accessor sanity checking

   - Make WFI emulation on GICv4 systems robust w.r.t. preemption,
     consistently requesting a doorbell interrupt on vcpu_put()

   - Uphold RES0 sysreg behavior when emulating older PMU versions

   - Avoid macro expansion when initializing PMU register names,
     ensuring the tracepoints pretty-print the sysreg

  s390:

   - Two fixes for asynchronous destroy

  x86 fixes will come early next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: pv: fix index value of replaced ASCE
  KVM: s390: pv: simplify shutdown and fix race
  KVM: arm64: Fix the name of sys_reg_desc related to PMU
  KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
  KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
  KVM: arm64: Add missing BTI instructions
  KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
  KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
  KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
  KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits

Pull ext4 fixes from Ted Ts'o:
 "Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's
  checkpoint code"

* tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
  ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
  ext4: correct inline offset when handling xattrs in inode body
  jbd2: remove __journal_try_to_free_buffer()
  jbd2: fix a race when checking checkpoint buffer busy
  jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
  jbd2: remove journal_clean_one_cp_list()
  jbd2: remove t_checkpoint_io_list
  jbd2: recheck chechpointing non-dirty buffer

Pull smb client fix from Steve French:
 "Add minor debugging improvement.

  The change improves ability to read a network trace to debug problems
  on encrypted connections which are very common (e.g. using wireshark
  or tcpdump).

  That works today with tools like 'smbinfo keys /mnt/file' but requires
  passing in a filename on the mount (see e.g. [1]), but it often makes
  more sense to just pass in the mount point path (ie a directory not a
  filename).

  So this fix was needed to debug some types of problems (an obvious
  example is on an encrypted connection failing operations on an empty
  share or with no files in the root of the directory) - so you can
  simply pass in the 'smbinfo keys <mntpoint>' and get the information
  that wireshark needs"

Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1]

* tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: allow dumping keys for directories too

Merge tag 'kvm-s390-master-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

Two fixes for asynchronous destroy

Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.5, part #1

 - Avoid pKVM finalization if KVM initialization fails

 - Add missing BTI instructions in the hypervisor, fixing an early boot
   failure on BTI systems

 - Handle MMU notifiers correctly for non hugepage-aligned memslots

 - Work around a bug in the architecture where hypervisor timer controls
   have UNKNOWN behavior under nested virt.

 - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
   in cpu hotplug resulting from per-CPU accessor sanity checking.

 - Make WFI emulation on GICv4 systems robust w.r.t. preemption,
   consistently requesting a doorbell interrupt on vcpu_put()

 - Uphold RES0 sysreg behavior when emulating older PMU versions

 - Avoid macro expansion when initializing PMU register names, ensuring
   the tracepoints pretty-print the sysreg.

Commit 6018b585 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.

Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com

Cc: stable@vger.kernel.org
Fixes: 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When ring_buffer_swap_cpu was called during resize process,
the cpu buffer was swapped in the middle, resulting in incorrect state.
Continuing to run in the wrong state will result in oops.

This issue can be easily reproduced using the following two scripts:
/tmp # cat test1.sh
//#! /bin/sh
for i in `seq 0 100000`
do
         echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb
         sleep 0.5
         echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb
         sleep 0.5
done
/tmp # cat test2.sh
//#! /bin/sh
for i in `seq 0 100000`
do
        echo irqsoff > /sys/kernel/debug/tracing/current_tracer
        sleep 1
        echo nop > /sys/kernel/debug/tracing/current_tracer
        sleep 1
done
/tmp # ./test1.sh &
/tmp # ./test2.sh &

A typical oops log is as follows, sometimes with other different oops logs.

[  231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8
[  231.713375] Modules linked in:
[  231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.5.0-rc1-00276-g20edcec2 #15
[  231.716750] Hardware name: linux,dummy-virt (DT)
[  231.718152] Workqueue: events update_pages_handler
[  231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  231.721171] pc : rb_update_pages+0x378/0x3f8
[  231.722212] lr : rb_update_pages+0x25c/0x3f8
[  231.723248] sp : ffff800082b9bd50
[  231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[  231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0
[  231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a
[  231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000
[  231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510
[  231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002
[  231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558
[  231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001
[  231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000
[  231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208
[  231.744196] Call trace:
[  231.744892]  rb_update_pages+0x378/0x3f8
[  231.745893]  update_pages_handler+0x1c/0x38
[  231.746893]  process_one_work+0x1f0/0x468
[  231.747852]  worker_thread+0x54/0x410
[  231.748737]  kthread+0x124/0x138
[  231.749549]  ret_from_fork+0x10/0x20
[  231.750434] ---[ end trace 0000000000000000 ]---
[  233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  233.721696] Mem abort info:
[  233.721935]   ESR = 0x0000000096000004
[  233.722283]   EC = 0x25: DABT (current EL), IL = 32 bits
[  233.722596]   SET = 0, FnV = 0
[  233.722805]   EA = 0, S1PTW = 0
[  233.723026]   FSC = 0x04: level 0 translation fault
[  233.723458] Data abort info:
[  233.723734]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[  233.724176]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[  233.724589]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[  233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000
[  233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[  233.726720] Modules linked in:
[  233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.5.0-rc1-00276-g20edcec2 #15
[  233.727777] Hardware name: linux,dummy-virt (DT)
[  233.728225] Workqueue: events update_pages_handler
[  233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  233.729054] pc : rb_update_pages+0x1a8/0x3f8
[  233.729334] lr : rb_update_pages+0x154/0x3f8
[  233.729592] sp : ffff800082b9bd50
[  233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[  233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418
[  233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003
[  233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58
[  233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001
[  233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000
[  233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c
[  233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0
[  233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000
[  233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000
[  233.734418] Call trace:
[  233.734593]  rb_update_pages+0x1a8/0x3f8
[  233.734853]  update_pages_handler+0x1c/0x38
[  233.735148]  process_one_work+0x1f0/0x468
[  233.735525]  worker_thread+0x54/0x410
[  233.735852]  kthread+0x124/0x138
[  233.736064]  ret_from_fork+0x10/0x20
[  233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060)
[  233.736959] ---[ end trace 0000000000000000 ]---

After analysis, the seq of the error is as follows [1-5]:

int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
			int cpu_id)
{
	for_each_buffer_cpu(buffer, cpu) {
		cpu_buffer = buffer->buffers[cpu];
		//1. get cpu_buffer, aka cpu_buffer(A)
		...
		...
		schedule_work_on(cpu,
		 &cpu_buffer->update_pages_work);
		//2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to
		// update_pages_handler, do the update process, set 'update_done' in
		// complete(&cpu_buffer->update_done) and to wakeup resize process.
	//---->
		//3. Just at this moment, ring_buffer_swap_cpu is triggered,
		//cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer.
		//ring_buffer_swap_cpu is called as the 'Call trace' below.

		Call trace:
		 dump_backtrace+0x0/0x2f8
		 show_stack+0x18/0x28
		 dump_stack+0x12c/0x188
		 ring_buffer_swap_cpu+0x2f8/0x328
		 update_max_tr_single+0x180/0x210
		 check_critical_timing+0x2b4/0x2c8
		 tracer_hardirqs_on+0x1c0/0x200
		 trace_hardirqs_on+0xec/0x378
		 el0_svc_common+0x64/0x260
		 do_el0_svc+0x90/0xf8
		 el0_svc+0x20/0x30
		 el0_sync_handler+0xb0/0xb8
		 el0_sync+0x180/0x1c0
	//<----

	/* wait for all the updates to complete */
	for_each_buffer_cpu(buffer, cpu) {
		cpu_buffer = buffer->buffers[cpu];
		//4. get cpu_buffer, cpu_buffer(B) is used in the following process,
		//the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong.
		//for example, cpu_buffer(A)->update_done will leave be set 1, and will
		//not 'wait_for_completion' at the next resize round.
		  if (!cpu_buffer->nr_pages_to_update)
			continue;

		if (cpu_online(cpu))
			wait_for_completion(&cpu_buffer->update_done);
		cpu_buffer->nr_pages_to_update = 0;
	}
	...
}
	//5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong,
	//Continuing to run in the wrong state, then oops occurs.

Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cnSigned-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since commit 08d43a5f ("tracing: Add lock-free tracing_map"),
this is never used, so can be removed.

Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Make it slightly easier to see which compiler options are added and
removed (and not worry about column limit too!).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Like C source files, tooling can find it useful to have the assembly
source file compilation recorded.

The .S extension appears to used across all architectures.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.

To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:

  1. It must have it's logical start immediately to the left of
  (ie less than) original logical start.

  2. It must not be deleted

To find this pa we use the following traversal method:

1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.

2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.

3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.

4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.

This approach also takes care of having deleted PAs in the tree.

(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)

[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/

Cc: stable@kernel.org # 6.4
Fixes: 38727786 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).

After all the processing:

order = 1 order below goal len
min_order = maximum of the three:-
             - order - trim_order
             - 1 order below B2C(s_stripe)
             - 1 order above original len

Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted.  This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied.  If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region.  The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.

Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull powerpc fixes from Michael Ellerman:

 - Reinstate support for little endian ELFv1 binaries, which it turns
   out still exist in the wild.

 - Revert a change which used asm goto for WARN_ON/__WARN_FLAGS, as it
   lead to dead code generation and seemed to trigger compiler bugs in
   some edge cases.

 - Fix a deadlock in the pseries VAS code, between live migration and
   the driver's mmap handler.

 - Disable KCOV instrumentation in the powerpc KASAN code.

Thanks to Andrew Donnellan, Benjamin Gray, Christophe Leroy, Haren
Myneni, Russell Currey, and Uwe Kleine-König.

* tag 'powerpc-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc/64s: Remove support for ELFv1 little endian userspace"
  powerpc/kasan: Disable KCOV in KASAN code
  powerpc/512x: lpbfifo: Convert to platform remove callback returning void
  powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files
  Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto"
  powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

From 2.43 to 2.44
Signed-off-by: Steve French <stfrench@microsoft.com>

Dumping the enc/dec keys is a session wide operation.
And it should not matter if the ioctl was run on
a regular file or a directory.

Currently, we obtain the tcon pointer from the
cifs file handle. But since there's no dir open call
in cifs, this is not populated for dirs.

This change allows dumping of session keys using ioctl
even for directories. To do this, we'll now get the
tcon pointer from the superblock, and not from the file
handle.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull s390 fixes from Heiko Carstens:

 - Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR)
   check to fault handler to prevent error handling for return values
   that don't indicate an error

 - Use kfree_sensitive() instead of kfree() in paes crypto code to clear
   memory that may contain keys before freeing it

 - Fix reply buffer size calculation for CCA replies in zcrypt device
   driver

* tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: fix reply buffer calculations for CCA replies
  s390/crypto: use kfree_sensitive() instead of kfree()
  s390/mm: fix per vma lock fault handling