Skip to content

L
linux
Switch branch/tag
  1. 07 Feb, 2022 17 commits
  3. 06 Feb, 2022 3 commits
    • Eric Dumazet's avatar
      ref_tracker: remove filter_irq_stacks() call · c2d1e3df
      Eric Dumazet authored 
      After commit e9400660 ("lib/stackdepot: always do filter_irq_stacks()
in stack_depot_save()") it became unnecessary to filter the stack
before calling stack_depot_save().
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2d1e3df
    • Eric Dumazet's avatar
      net: initialize init_net earlier · 9c1be193
      Eric Dumazet authored 
      While testing a patch that will follow later
("net: add netns refcount tracker to struct nsproxy")
I found that devtmpfs_init() was called before init_net
was initialized.

This is a bug, because devtmpfs_setup() calls
ksys_unshare(CLONE_NEWNS);

This has the effect of increasing init_net refcount,
which will be later overwritten to 1, as part of setup_net(&init_net)

We had too many prior patches [1] trying to work around the root cause.

Really, make sure init_net is in BSS section, and that net_ns_init()
is called earlier at boot time.

Note that another patch ("vfs: add netns refcount tracker
to struct fs_context") also will need net_ns_init() being called
before vfs_caches_init()

As a bonus, this patch saves around 4KB in .data section.

[1]

f8c46cb3 ("netns: do not call pernet ops for not yet set up init_net namespace")
b5082df8 ("net: Initialise init_net.count to 1")
734b6541 ("net: Statically initialize init_net.dev_base_head")

v2: fixed a build error reported by kernel build bots (CONFIG_NET=n)
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9c1be193
    • Juhee Kang's avatar
      net: hsr: use hlist_head instead of list_head for mac addresses · 4acc45db
      Juhee Kang authored 
      Currently, HSR manages mac addresses of known HSR nodes by using list_head.
It takes a lot of time when there are a lot of registered nodes due to
finding specific mac address nodes by using linear search. We can be
reducing the time by using hlist. Thus, this patch moves list_head to
hlist_head for mac addresses and this allows for further improvement of
network performance.

    Condition: registered 10,000 known HSR nodes
    Before:
    # iperf3 -c 192.168.10.1 -i 1 -t 10
    Connecting to host 192.168.10.1, port 5201
    [  5] local 192.168.10.2 port 59442 connected to 192.168.10.1 port 5201
    [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
    [  5]   0.00-1.49   sec  3.75 MBytes  21.1 Mbits/sec    0    158 KBytes
    [  5]   1.49-2.05   sec  1.25 MBytes  18.7 Mbits/sec    0    166 KBytes
    [  5]   2.05-3.06   sec  2.44 MBytes  20.3 Mbits/sec   56   16.9 KBytes
    [  5]   3.06-4.08   sec  1.43 MBytes  11.7 Mbits/sec   11   38.0 KBytes
    [  5]   4.08-5.00   sec   951 KBytes  8.49 Mbits/sec    0   56.3 KBytes

    After:
    # iperf3 -c 192.168.10.1 -i 1 -t 10
    Connecting to host 192.168.10.1, port 5201
    [  5] local 192.168.10.2 port 36460 connected to 192.168.10.1 port 5201
    [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
    [  5]   0.00-1.00   sec  7.39 MBytes  62.0 Mbits/sec    3    130 KBytes
    [  5]   1.00-2.00   sec  5.06 MBytes  42.4 Mbits/sec   16    113 KBytes
    [  5]   2.00-3.00   sec  8.58 MBytes  72.0 Mbits/sec   42   94.3 KBytes
    [  5]   3.00-4.00   sec  7.44 MBytes  62.4 Mbits/sec    2    131 KBytes
    [  5]   4.00-5.07   sec  8.13 MBytes  63.5 Mbits/sec   38   92.9 KBytes
Signed-off-by: default avatarJuhee Kang <claudiajkang@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4acc45db
  5. 05 Feb, 2022 20 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7