- 20 Oct, 2021 13 commits
-
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. BTW, change the return value from 'ENXIO' to 'ENODEV', perfer ENODEV which means no such device. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211008092858.495-7-caihuoqing@baidu.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #Meson8b Odroid-C1 Link: https://lore.kernel.org/r/20211008092858.495-6-caihuoqing@baidu.comSigned-off-by:
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
-
Colin Ian King authored
When !iio_buffer_space_available(rb) is true and signal_pending(current) is false the end of the do-while loop is reached and the uninitialized variable ret is zero checked. Fix this by initializing variable ret to zero. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 9eeee3b0 ("iio: Add output buffer support") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20211015153254.33783-1-colin.king@canonical.comSigned-off-by:
-
André Gustavo Nakagomi Lopez authored
The remove function and the goto sections are not necessary if devm functions are used. Convert device register to devm version. Add hook functions to release device resources, and use them inside probe with devm_add_action, which will release resources on driver detach. To maintain the order of which device resources were released/reseted, register the hook functions as soon as resources are obtained/initialized. Since devres actions are called on driver detach, the remove function and the error-handling goto sections are no longer necessary. Signed-off-by:
André Gustavo Nakagomi Lopez <andregnl@usp.br> Link: https://lore.kernel.org/r/YWnMsGlc/I35gYvy@Andryuu.brSigned-off-by:
-
Nikita Travkin authored
Add of_device_id table so the driver can be used on DT platforms without relying on i2c_device_id fallback. (So DT schema validation is possible) Signed-off-by:
Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20211006163058.145842-4-nikita@trvn.ruSigned-off-by:
-
Nikita Travkin authored
On some platforms the supply regulators must be enabled before the sensor can work. Add vdd and vddio regulators for the sensor and IO bus power respectively. Signed-off-by:
-
Nikita Travkin authored
Add devicetree bindings for ltr501, ltr559 and ltr301. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211006163058.145842-2-nikita@trvn.ruSigned-off-by:
-
Nikita Travkin authored
Add vendor prefix for LITE-ON Technology Corp. Signed-off-by:
-
- 19 Oct, 2021 27 commits
-
-
Manivannan Sadhasivam authored
Since Hemant is not carrying out any maintainership duties let's make him as a dedicated reviewer. Also add the new mailing lists dedicated for MHI in subspace mailing list server. Reviewed-by:
Hemant Kumar <hemantk@codeaurora.org> Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211019133901.173966-1-manivannan.sadhasivam@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device and feature support for the 5.16 cycle Counter subsystem changes now sent separately. This has been a busy cycle, so lots here and a few more stragglers to come next week. Big new feature in this cycle is probably output buffer support. This has been in the works for a very long time so it's great to see Mihail pick up the challenge and build upon his predecessors work to finally bring this feature to mainline. New device support ------------------ * adi,adxl313 - New driver and dt bindings for this low power accelerometer. * adi,adxl355 - New driver and dt bindings for this accelerometer. - Later series adds buffer support. * asahi-kasei,ak8975 - Minor additions to driver to support ak09916 * aspeed,aspeed-adc - Substantial rework plus feature additions to add support for the ast2600 including a new dt bindings doc. * atmel,at91_sama5d2 - Rework and support introduced for the sama7g5 parts. * maxim,max31865 - New driver and bindings for this RTD temperature sensor chip. * nxp,imx8qxp - New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc. * senseair,sunrise - New driver and bindings for this family of carbon dioxide gas sensors. * sensiron,scd4x - New driver and bindings for this carbon dioxide gas sensor. New features ------------ * Output buffer support. Works in a similar fashion to input buffers, but in this case userspace pushes data into the kfifo which is then drained to the device when a trigger occurs. Support added to the ad5766 DAC driver. * Core, devm_iio_map_array_register() to avoid need for devm_add_action_or_reset() based cleanup in fully managed allocation drivers. * Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a few drivers where it really hard to ensure the correct data alignment in an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce buffer so should be avoided whenever possible. Used in the ti,adc108s102, invense,mpu3050 and adi,adis16400. This closes the last known set of drivers with alignment issues at this interface. * maxim,max1027 - Substantial rework to this driver main target of which was supporting use of other triggers than it's own EOC interrupt. - Transfer optimization. * nxp,fxls8962af - Threshold even support including using it as a wakeup source. Cleanups, minor fixes etc ------------------------- Chances of a common type to multiple drivers: * devm_ conversion and drop of .remove() callbacks in: - adi,ad5064 - adi,ad7291 - adi,ad7303 - adi,ad7746 - adi,ad9832 - adi,adis16080 - dialog,da9150-gpadc - intel,mrfld_adc - marvell,berlin2 - maxim,max1363 - maxim,max44000 - nuvoton,nau7802 - st_sensors (includes a lot of rework!) - ti,ads8344 - ti,lp8788 * devm_platform_ioremap_resource() used to reduce boilerplate - cirrus,ep93xx - rockchip,saradc - stm,stm32-dac * Use dev_err_probe() in more places to both not print on deferred probe and ensure a reason for the deferral is available for debug purposes. - adi,ad8801 - capella,cm36651 - linear,ltc1660 - maxim,ds4424 - maxim,max5821 - microchip,mcp4922 - nxp,lpc18xx - onnn,noa1305 - st,lsm9ds0 - st,st_sensors - st,stm32-dac - ti,afe4403 - ti,afe4404 - ti,dac7311 * Drop error returns in SPI and I2C remove() functions as they are ignored and long term plan is to change these all over to returning void. In some cases these patches just make it 'obvious' they always return 0 where it was the case before but not easy to tell. - adi,ad5380 - adi,ad5446 - adi,ad5686 - adi,ad5592r - bosch,bma400 - bosch,bmc150 - fsl,mma7455 - honeywell,hmc5843 - kionix,kxsd9 - maxim,max5487 - meas,ms5611 - ti,afe4403 Driver specific changes * adi,ad5770r - Bring driver inline with documented bindings. * adi,ad7746 - Trivial style fix * adi,ad7949 - Express some magic values as the underlying parts via new #defines. - Make it work with SPI controllers that don't support 14 or 16 bit messages - Support selection of voltage reference from dt including expanding the dt-bindings to cover this new functionality. * adi,ad799x - Implement selection of external reference voltage on AD7991, AD7995 and AD7999. - Add missing dt-bindings doc for devices supported by this driver. * adi,adislib - Move interrupt startup to better location in startup flow. - Handle devices that cannot mask/unmask the drdy pin and must instead mask at the interrupt controller. Applies to the adis16460 and adis16475 from which we then drop equivalent code. * adi,ltc2983 - Add support for optional reset pin. - Fail to probe if no channels specified in dt binding. * asahi-kasei,ak8975 - dt-binding additions of missing vid-supply regulator. * aspeed,aspeed-adc - Typo fix. * fsl,mma7660 - Mark acpi_device_id table __maybe_unused to avoid build warning. * fsl,imx25-gcq - Avoid initializing regulators that aren't used. * invensense,mpu3050 - Drop a dead protection against a clash with the old input driver. * invensense,mpu6050 - Rework code to not use strcpy() and hence avoid possibility of wrong sized buffers. Note this wasn't a bug, but the new code is a lot more readable. - Mark acpi_device_id table __maybe_unused to avoid build warning. * kionix,kxcjk1013 - dt-binding addition to note it supports interrupts. * marvell,berlin2-adc - Enable COMPILE_TEST building. * maxim,max1027 - Avoid returning success in an error path. * nxp,imx8qxp - Fix warning when runtime pm not enabled via __maybe_unused. * ricoh,rn5t618 - Use the new devm_iio_map_array_register() instead of open coding the same. * samsung,exynos_adc - Improve kconfig help text. * st,lsm6dsx - Move max_fifo_size into the fifo_ops structure where the other configuration parameters are found. * st,st_sensors: - Reorder to ensure we turn the power off after removing userspace interfaces. * senseair,sunrise - Add missing I2C dependency. * ti,twl6030 - Small code tidy up. * tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (148 commits) iio: imx8qxp-adc: mark PM functions as __maybe_unused iio: pressure: ms5611: Make ms5611_remove() return void iio: potentiometer: max5487: Don't return an error in .remove() iio: magn: hmc5843: Make hmc5843_common_remove() return void iio: health: afe4403: Don't return an error in .remove() iio: dac: ad5686: Make ad5686_remove() return void iio: dac: ad5592r: Make ad5592r_remove() return void iio: dac: ad5446: Make ad5446_remove() return void iio: dac: ad5380: Make ad5380_remove() return void iio: accel: mma7455: Make mma7455_core_remove() return void iio: accel: kxsd9: Make kxsd9_common_remove() return void iio: accel: bmi088: Make bmi088_accel_core_remove() return void iio: accel: bmc150: Make bmc150_accel_core_remove() return void iio: accel: bma400: Make bma400_remove() return void drivers:iio:dac:ad5766.c: Add trigger buffer iio: triggered-buffer: extend support to configure output buffers iio: kfifo-buffer: Add output buffer support iio: Add output buffer support iio: documentation: Document scd4x calibration use drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor ...
-
David Lechner authored
This removes the chrdev_lock from the counter subsystem. This was intended to prevent opening the chrdev more than once. However, this doesn't work in practice since userspace can duplicate file descriptors and pass file descriptors to other processes. Since this protection can't be relied on, it is best to just remove it. Suggested-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
David Lechner <david@lechnology.com> Link: https://lore.kernel.org/r/20211017185521.3468640-1-david@lechnology.comSigned-off-by:
-
David Lechner authored
In the counter subsystem, we are already using sysfs_emit(), but there were a few places where we were still using sprintf() in *_show() functions. For consistency and added protections, use sysfs_emit() everywhere. Suggested-by:
-
Ziyang Xuan authored
When endpoint_alloc() return failed in xillyusb_setup_base_eps(), 'xdev->msg_ep' will be freed but not set to NULL. That lets program enter fail handling to cleanup_dev() in xillyusb_probe(). Check for 'xdev->msg_ep' is invalid in cleanup_dev() because 'xdev->msg_ep' did not set to NULL when was freed. So the UAF problem for 'xdev->msg_ep' is triggered. ================================================================== BUG: KASAN: use-after-free in fifo_mem_release+0x1f4/0x210 CPU: 0 PID: 166 Comm: kworker/0:2 Not tainted 5.15.0-rc5+ #19 Call Trace: dump_stack_lvl+0xe2/0x152 print_address_description.constprop.0+0x21/0x140 ? fifo_mem_release+0x1f4/0x210 kasan_report.cold+0x7f/0x11b ? xillyusb_probe+0x530/0x700 ? fifo_mem_release+0x1f4/0x210 fifo_mem_release+0x1f4/0x210 ? __sanitizer_cov_trace_pc+0x1d/0x50 endpoint_dealloc+0x35/0x2b0 cleanup_dev+0x90/0x120 xillyusb_probe+0x59a/0x700 ... Freed by task 166: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x109/0x140 kfree+0x117/0x4c0 xillyusb_probe+0x606/0x700 Set 'xdev->msg_ep' to NULL after being freed in xillyusb_setup_base_eps() to fix the UAF problem. Fixes: a53d1202 ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)") Cc: stable <stable@vger.kernel.org> Acked-by:
Eli Billauer <eli.billauer@gmail.com> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20211016052047.1611983-1-william.xuanziyang@huawei.comSigned-off-by:
-
Todd Kjos authored
When freeing txn buffers, binder_transaction_buffer_release() attempts to detect whether the current context is the target by comparing current->group_leader to proc->tsk. This is an unreliable test. Instead explicitly pass an 'is_failure' boolean. Detecting the sender was being used as a way to tell if the transaction failed to be sent. When cleaning up after failing to send a transaction, there is no need to close the fds associated with a BINDER_TYPE_FDA object. Now 'is_failure' can be used to accurately detect this case. Fixes: 44d8047f ("binder: use standard functions to allocate fds") Cc: stable <stable@vger.kernel.org> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20211015233811.3532235-1-tkjos@google.comSigned-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next Oded writes: This tag contains habanalabs driver changes for v5.16: - Add a new uAPI (under the memory ioctl) to request from the driver to export a DMA-BUF object that represents a memory region on the device's DRAM. This is needed to enable peer-to-peer over PCIe between habana device and an RDMA adapter (e.g. mlnx5 or efa rdma adapter). - Add debugfs node to dynamically configure CS timeout. Up until now, it was only configurable through kernel module parameter. - Fetch more comprehensive power information from the firmware. - Always take timestamp when waiting for user interrupt, as the user needs that information to optimize the graph runtime compilation. - Modify user interrupt to look on 64-bit user value as fence, instead of 32-bit. - Bypass reset in case of repeated h/w error event after device reset. This is to prevent endless loop of resets to the device. - Fix several bugs in multi CS completion code. - Fix race condition in fd close/open. - Update to latest firmware headers - Add select CRC32 in kconfig - Small fixes, cosmetics * tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (25 commits) habanalabs: refactor fence handling in hl_cs_poll_fences habanalabs: context cleanup cosmetics habanalabs: simplify wait for interrupt with timestamp flow habanalabs: initialize hpriv fields before adding new node habanalabs: Unify frequency set/get functionality habanalabs: select CRC32 habanalabs: add support for dma-buf exporter habanalabs: define uAPI to export FD for DMA-BUF habanalabs: fix NULL pointer dereference habanalabs: fix race condition in multi CS completion habanalabs: use only u32 habanalabs: update firmware files habanalabs: bypass reset for continuous h/w error event habanalabs: take timestamp on wait for interrupt habanalabs: prevent race between fd close/open habanalabs: refactor reset log message habanalabs: define soft-reset as inference op habanalabs: fix debugfs device memory MMU VA translation habanalabs: add support for a long interrupt target value habanalabs: remove redundant cs validity checks ...
-
Arnd Bergmann authored
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions are unused, producing a warning: drivers/iio/adc/imx8qxp-adc.c:433:12: error: 'imx8qxp_adc_runtime_resume' defined but not used [-Werror=unused-function] 433 | static int imx8qxp_adc_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/iio/adc/imx8qxp-adc.c:419:12: error: 'imx8qxp_adc_runtime_suspend' defined but not used [-Werror=unused-function] 419 | static int imx8qxp_adc_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Mark them as __maybe_unused to shut up the compiler. Fixes: 1e23dcaa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Uwe Kleine-König authored
Up to now ms5611_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20211013203223.2694577-16-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The only effect of returning an error in an spi .remove() callback is that the spi core issues a generic warning message. Instead emit a more specific error message and return 0 to not report the same issue twice. Signed-off-by:
-
Uwe Kleine-König authored
Up to now hmc5843_common_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
The only effect of returning an error in an spi .remove() callback is that the spi core issues another warning message. Don't report the same problem twice and return 0 unconditionally instead. Also degrade the log level to warning, as nothing really bad is expected from a failure to put the device in suspend mode. Signed-off-by:
-
Uwe Kleine-König authored
Up to now ad5686_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now ad5592r_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now ad5446_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now ad5380_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now mma7455_core_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now kxsd9_common_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now bmi088_accel_core_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now bmc150_accel_core_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
When an i2c or spi driver's remove function returns a non-zero error code nothing happens apart from emitting a generic error message. Make this error message more device specific and return zero instead in the remove callbacks. As the return value of bma400_remove() is unused then, change the function to not yield a return value. Signed-off-by:
-
Mihail Chindris authored
This chip is able to generate waveform and using an with the output trigger buffer will be easy to generate one. Signed-off-by:
Mihail Chindris <mihail.chindris@analog.com> Reviewed-by:
-
Alexandru Ardelean authored
Now that output (kfifo) buffers are supported, we need to extend the {devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction parameter. This allows us to attach an output triggered buffer to a DAC device. Unfortunately it's a bit difficult to add another macro to avoid changing 5 drivers where {devm_}iio_triggered_buffer_setup_ext() is used. Well, it's doable, but may not be worth the trouble vs just updating all these 5 drivers. Signed-off-by:Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Lars-Peter Clausen authored
Add output buffer support to the kfifo buffer implementation. The implementation is straight forward and mostly just wraps the kfifo API to provide the required operations. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Mihail Chindris authored
Currently IIO only supports buffer mode for capture devices like ADCs. Add support for buffered mode for output devices like DACs. The output buffer implementation is analogous to the input buffer implementation. Instead of using read() to get data from the buffer write() is used to copy data into the buffer. poll() with POLLOUT will wakeup if there is space available. Drivers can remove data from a buffer using iio_pop_from_buffer(), the function can e.g. called from a trigger handler to write the data to hardware. A buffer can only be either a output buffer or an input, but not both. So, for a device that has an ADC and DAC path, this will mean 2 IIO buffers (one for each direction). The direction of the buffer is decided by the new direction field of the iio_buffer struct and should be set after allocating and before registering it. Co-developed-by:
-
Roan van Dijk authored
Add entries from Documentation/ABI/testing/sysfs-bus-iio-scd30 to Documentation/ABI/testing/sysfs-bus-iio. The attributes of the scd4x and scd30 are common. Remove Documentation/ABI/testing/sysfs-bus-iio-scd30. Signed-off-by:
Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20211008101706.755942-5-roan@protonic.nlSigned-off-by:
-
Roan van Dijk authored
This is a driver for the SCD4x CO2 sensor from Sensirion. The sensor is able to measure CO2 concentration, temperature and relative humdity. The sensor uses a photoacoustic principle for measuring CO2 concentration. An I2C interface is supported by this driver in order to communicate with the sensor. Signed-off-by:
-
