Fix passing of the additional security info via version
operations. Force new open when getting SACL and avoid
reuse of files that were previously open without
sufficient privileges to access SACLs.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Add SYSTEM_SECURITY access flag and use with smb2 when opening
files for getting/setting SACLs. Add "system.cifs_ntsd_full"
extended attribute to allow user-space access to the functionality.
Avoid multiple server calls when setting owner, DACL, and SACL.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The patch 7d6535b7: "cifs: Simplify reconnect code when dfs
upcall is enabled" leads to the following static checker warning:

	fs/cifs/connect.c:160 reconn_set_next_dfs_target()
	error: 'server->hostname' dereferencing possible ERR_PTR()

Avoid dereferencing the error pointer by early returning on error
condition.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

This code is slightly nicer if we flip the cifs_sockaddr_equal()
around and pull all the code in one tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

There are three error paths which need to unlock before returning.

Fixes: 121d947d ("cifs: Handle witness client move notification")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

The unlock is done in the caller, this is a stray which leads to a
double unlock bug.

Fixes: bf80e5d4 ("cifs: Send witness register and unregister commands to userspace daemon")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull cifs updates from Steve French:
 "The largest part are for support of the newer mount API which has been
  needed for cifs/smb3 mounts for a long time due to the new API's
  better handling of remount, and better error reporting. There are
  three additional small cleanup patches for this being tested, that are
  not included yet.

  This series also includes addition of support for the SMB3 witness
  protocol which can provide important notifications from the server to
  client on server address or export or network changes. This can be
  useful for example in order to be notified before the failure - when a
  server's IP address changes (in the future it will allow us to support
  server notifications of when a share is moved).

  It also includes three patches for stable e.g. some that better handle
  some confusing error messages during session establishment"

* tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (55 commits)
  cifs: update internal module version number
  cifs: Fix support for remount when not changing rsize/wsize
  cifs: handle "guest" mount parameter
  cifs: correct four aliased mount parms to allow use of previous names
  cifs: Tracepoints and logs for tracing credit changes.
  cifs: fix use after free in cifs_smb3_do_mount()
  cifs: fix rsize/wsize to be negotiated values
  cifs: Fix some error pointers handling detected by static checker
  smb3: remind users that witness protocol is experimental
  cifs: update super_operations to show_devname
  cifs: fix uninitialized variable in smb3_fs_context_parse_param
  cifs: update mnt_cifs_flags during reconfigure
  cifs: move update of flags into a separate function
  cifs: remove ctx argument from cifs_setup_cifs_sb
  cifs: do not allow changing posix_paths during remount
  cifs: uncomplicate printing the iocharset parameter
  cifs: don't create a temp nls in cifs_setup_ipc
  cifs: simplify handling of cifs_sb/ctx->local_nls
  cifs: we do not allow changing username/password/unc/... during remount
  cifs: add initial reconfigure support
  ...

Pull networking fixes from Jakub Kicinski:
 "Current release - always broken:

   - net/smc: fix access to parent of an ib device

   - devlink: use _BITUL() macro instead of BIT() in the UAPI header

   - handful of mptcp fixes

  Previous release - regressions:

   - intel: AF_XDP: clear the status bits for the next_to_use descriptor

   - dpaa2-eth: fix the size of the mapped SGT buffer

  Previous release - always broken:

   - mptcp: fix security context on server socket

   - ethtool: fix string set id check

   - ethtool: fix error paths in ethnl_set_channels()

   - lan743x: fix rx_napi_poll/interrupt ping-pong

   - qca: ar9331: fix sleeping function called from invalid context bug"

* tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
  net/sched: sch_taprio: reset child qdiscs before freeing them
  nfp: move indirect block cleanup to flower app stop callback
  octeontx2-af: Fix undetected unmap PF error check
  net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"
  qlcnic: Fix error code in probe
  mptcp: fix pending data accounting
  mptcp: push pending frames when subflow has free space
  mptcp: properly annotate nested lock
  mptcp: fix security context on server socket
  net/mlx5: Fix compilation warning for 32-bit platform
  mptcp: clear use_ack and use_map when dropping other suboptions
  devlink: use _BITUL() macro instead of BIT() in the UAPI header
  net: korina: fix return value
  net/smc: fix access to parent of an ib device
  ethtool: fix error paths in ethnl_set_channels()
  nfc: s3fwrn5: Remove unused NCI prop commands
  nfc: s3fwrn5: Remove the delay for NFC sleep
  phy: fix kdoc warning
  tipc: do sanity check payload of a netlink message
  use __netdev_notify_peers in hyperv
  ...

Pull OpenRISC updates from Stafford Horne:

 - New drivers and OpenRISC support for the LiteX platform

 - A bug fix to support userspace gdb debugging

 - Fixes one compile issue with blk-iocost

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: add local64.h to fix blk-iocost build
  openrisc: fix trap for debugger breakpoint signalling
  openrisc: add support for LiteX
  drivers/tty/serial: add LiteUART driver
  dt-bindings: serial: document LiteUART bindings
  drivers/soc/litex: add LiteX SoC Controller driver
  dt-bindings: soc: document LiteX SoC Controller bindings
  dt-bindings: vendor: add vendor prefix for LiteX

Pull powerpc updates from Michael Ellerman:

 - Switch to the generic C VDSO, as well as some cleanups of our VDSO
   setup/handling code.

 - Support for KUAP (Kernel User Access Prevention) on systems using the
   hashed page table MMU, using memory protection keys.

 - Better handling of PowerVM SMT8 systems where all threads of a core
   do not share an L2, allowing the scheduler to make better scheduling
   decisions.

 - Further improvements to our machine check handling.

 - Show registers when unwinding interrupt frames during stack traces.

 - Improvements to our pseries (PowerVM) partition migration code.

 - Several series from Christophe refactoring and cleaning up various
   parts of the 32-bit code.

 - Other smaller features, fixes & cleanups.

Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.

* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
  powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
  powerpc: Add config fragment for disabling -Werror
  powerpc/configs: Add ppc64le_allnoconfig target
  powerpc/powernv: Rate limit opal-elog read failure message
  powerpc/pseries/memhotplug: Quieten some DLPAR operations
  powerpc/ps3: use dma_mapping_error()
  powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
  powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
  powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
  KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
  KVM: PPC: fix comparison to bool warning
  KVM: PPC: Book3S: Assign boolean values to a bool variable
  powerpc: Inline setup_kup()
  powerpc/64s: Mark the kuap/kuep functions non __init
  KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
  powerpc/xive: Improve error reporting of OPAL calls
  powerpc/xive: Simplify xive_do_source_eoi()
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
  ...

Pull tracing updates from Steven Rostedt:
 "The major update to this release is that there's a new arch config
  option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS.

  Currently, only x86_64 enables it. All the ftrace callbacks now take a
  struct ftrace_regs instead of a struct pt_regs. If the architecture
  has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will
  have enough information to read the arguments of the function being
  traced, as well as access to the stack pointer.

  This way, if a user (like live kernel patching) only cares about the
  arguments, then it can avoid using the heavier weight "regs" callback,
  that puts in enough information in the struct ftrace_regs to simulate
  a breakpoint exception (needed for kprobes).

  A new config option that audits the timestamps of the ftrace ring
  buffer at most every event recorded.

  Ftrace recursion protection has been cleaned up to move the protection
  to the callback itself (this saves on an extra function call for those
  callbacks).

  Perf now handles its own RCU protection and does not depend on ftrace
  to do it for it (saving on that extra function call).

  New debug option to add "recursed_functions" file to tracefs that
  lists all the places that triggered the recursion protection of the
  function tracer. This will show where things need to be fixed as
  recursion slows down the function tracer.

  The eval enum mapping updates done at boot up are now offloaded to a
  work queue, as it caused a noticeable pause on slow embedded boards.

  Various clean ups and last minute fixes"

* tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  tracing: Offload eval map updates to a work queue
  Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"
  ring-buffer: Add rb_check_bpage in __rb_allocate_pages
  ring-buffer: Fix two typos in comments
  tracing: Drop unneeded assignment in ring_buffer_resize()
  tracing: Disable ftrace selftests when any tracer is running
  seq_buf: Avoid type mismatch for seq_buf_init
  ring-buffer: Fix a typo in function description
  ring-buffer: Remove obsolete rb_event_is_commit()
  ring-buffer: Add test to validate the time stamp deltas
  ftrace/documentation: Fix RST C code blocks
  tracing: Clean up after filter logic rewriting
  tracing: Remove the useless value assignment in test_create_synth_event()
  livepatch: Use the default ftrace_ops instead of REGS when ARGS is available
  ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
  ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs
  MAINTAINERS: assign ./fs/tracefs to TRACING
  tracing: Fix some typos in comments
  ftrace: Remove unused varible 'ret'
  ring-buffer: Add recording of ring buffer recursion into recursed_functions
  ...

Pull modules updates from Jessica Yu:
 "Summary of modules changes for the 5.11 merge window:

   - Fix a race condition between systemd/udev and the module loader.

     The module loader was sending a uevent before the module was fully
     initialized (i.e., before its init function has been called). This
     means udev can start processing the module uevent before the module
     has finished initializing, and some udev rules expect that the
     module has initialized already upon receiving the uevent.

     This resulted in some systemd mount units failing if udev processes
     the event faster than the module can finish init. This is fixed by
     delaying the uevent until after the module has called its init
     routine.

   - Make the linker array sections for kernel params and module version
     attributes more robust by switching to use the alignment of the
     type in question.

     Namely, linker section arrays will be constructed using the
     alignment required by the struct (using __alignof__()) as opposed
     to a specific value such as sizeof(void *) or sizeof(long). This is
     less likely to cause breakages should the size of the type ever
     change (Johan Hovold)

   - Fix module state inconsistency by setting it back to GOING when a
     module fails to load and is on its way out (Miroslav Benes)

   - Some comment and code cleanups (Sergey Shtylyov)"

* tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: delay kobject uevent until after module init call
  module: drop semicolon from version macro
  init: use type alignment for kernel parameters
  params: clean up module-param macros
  params: use type alignment for kernel parameters
  params: drop redundant "unused" attributes
  module: simplify version-attribute handling
  module: drop version-attribute alignment
  module: fix comment style
  module: add more 'kernel-doc' comments
  module: fix up 'kernel-doc' comments
  module: only handle errors with the *switch* statement in module_sig_check()
  module: avoid *goto*s in module_sig_check()
  module: merge repetitive strings in module_sig_check()
  module: set MODULE_STATE_GOING state when a module fails to load

Pull dmaengine updates from Vinod Koul:
 "The last dmaengine updates for this year :)

  This contains couple of new drivers, new device support and updates to
  bunch of drivers.

  New drivers/devices:
   - Qualcomm ADM driver
   - Qualcomm GPI driver
   - Allwinner A100 DMA support
   - Microchip Sama7g5 support
   - Mediatek MT8516 apdma

  Updates:
   - more updates to idxd driver and support for IAX config
   - runtime PM support for dw driver
   - TI drivers"

* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
  soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
  dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
  dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
  dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
  dmaengine: ti: k3-udma: Initial support for K3 BCDMA
  soc: ti: k3-ringacc: add AM64 DMA rings support.
  dmaengine: ti: Add support for k3 event routers
  dmaengine: ti: k3-psil: Add initial map for AM64
  dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 BCDMA
  dmaengine: dmatest: Use dmaengine_get_dma_device
  dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
  dmaengine: Add support for per channel coherency handling
  dmaengine: of-dma: Add support for optional router configuration callback
  dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
  dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
  dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
  dmaengine: ti: k3-udma: Add support for second resource range from sysfw
  dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
  ...

Pull mailbox updates from Jassi Brar:

 - arm: added mhu-v2 controller driver

 - arm_mhu_db: fix kfree by using devm_ variant

 - stm32-ipcc: misc cleanup

* tag 'mailbox-v5.11' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: arm_mhuv2: Add driver
  dt-bindings: mailbox : arm,mhuv2: Add bindings
  mailbox: stm32-ipcc: cast void pointers to unsigned long
  mailbox: stm32-ipcc: remove duplicate error message
  mailbox: stm32-ipcc: add COMPILE_TEST dependency
  mailbox: arm_mhu_db: Fix mhu_db_shutdown by replacing kfree with devm_kfree

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:

   - NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
     support

   - A series of patches to improve readdir performance, particularly
     with large directories

   - Basic support for using NFS/RDMA with the pNFS files and flexfiles
     drivers

   - Micro-optimisations for RDMA

   - RDMA tracing improvements

  Bugfixes:

   - Fix a long standing bug with xs_read_xdr_buf() when receiving
     partial pages (Dan Aloni)

   - Various fixes for getxattr and listxattr, when used over non-TCP
     transports

   - Fixes for containerised NFS from Sargun Dhillon

   - switch nfsiod to be an UNBOUND workqueue (Neil Brown)

   - READDIR should not ask for security label information if there is
     no LSM policy (Olga Kornievskaia)

   - Avoid using interval-based rebinding with TCP in lockd (Calum
     Mackay)

   - A series of RPC and NFS layer fixes to support the NFSv4.2
     READ_PLUS code

   - A couple of fixes for pnfs/flexfiles read failover

  Cleanups:

   - Various cleanups for the SUNRPC xdr code in conjunction with the
     READ_PLUS fixes"

* tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
  NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read()
  pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read
  NFSv4/pnfs: Add tracing for the deviceid cache
  fs/lockd: convert comma to semicolon
  NFSv4.2: fix error return on memory allocation failure
  NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet
  NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow
  NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow
  NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer
  NFSv4.2: decode_read_plus_hole() needs to check the extent offset
  NFSv4.2: decode_read_plus_data() must skip padding after data segment
  NFSv4.2: Ensure we always reset the result->count in decode_read_plus()
  SUNRPC: When expanding the buffer, we may need grow the sparse pages
  SUNRPC: Cleanup - constify a number of xdr_buf helpers
  SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field
  SUNRPC: _copy_to/from_pages() now check for zero length
  SUNRPC: Cleanup xdr_shrink_bufhead()
  SUNRPC: Fix xdr_expand_hole()
  SUNRPC: Fixes for xdr_align_data()
  SUNRPC: _shift_data_left/right_pages should check the shift length
  ...

Pull ceph updates from Ilya Dryomov:
 "The big ticket item here is support for msgr2 on-wire protocol, which
  adds the option of full in-transit encryption using AES-GCM algorithm
  (myself).

  On top of that we have a series to avoid intermittent errors during
  recovery with recover_session=clean and some MDS request encoding work
  from Jeff, a cap handling fix and assorted observability improvements
  from Luis and Xiubo and a good number of cleanups.

  Luis also ran into a corner case with quotas which sadly means that we
  are back to denying cross-quota-realm renames"

* tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client: (59 commits)
  libceph: drop ceph_auth_{create,update}_authorizer()
  libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1
  libceph, ceph: implement msgr2.1 protocol (crc and secure modes)
  libceph: introduce connection modes and ms_mode option
  libceph, rbd: ignore addr->type while comparing in some cases
  libceph, ceph: get and handle cluster maps with addrvecs
  libceph: factor out finish_auth()
  libceph: drop ac->ops->name field
  libceph: amend cephx init_protocol() and build_request()
  libceph, ceph: incorporate nautilus cephx changes
  libceph: safer en/decoding of cephx requests and replies
  libceph: more insight into ticket expiry and invalidation
  libceph: move msgr1 protocol specific fields to its own struct
  libceph: move msgr1 protocol implementation to its own file
  libceph: separate msgr1 protocol implementation
  libceph: export remaining protocol independent infrastructure
  libceph: export zero_page
  libceph: rename and export con->flags bits
  libceph: rename and export con->state states
  libceph: make con->state an int
  ...

Pull overlayfs updates from Miklos Szeredi:

 - Allow unprivileged mounting in a user namespace.

   For quite some time the security model of overlayfs has been that
   operations on underlying layers shall be performed with the
   privileges of the mounting task.

   This way an unprvileged user cannot gain privileges by the act of
   mounting an overlayfs instance. A full audit of all function calls
   made by the overlayfs code has been performed to see whether they
   conform to this model, and this branch contains some fixes in this
   regard.

 - Support running on copied filesystem images by optionally disabling
   UUID verification.

 - Bug fixes as well as documentation updates.

* tag 'ovl-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: unprivieged mounts
  ovl: do not get metacopy for userxattr
  ovl: do not fail because of O_NOATIME
  ovl: do not fail when setting origin xattr
  ovl: user xattr
  ovl: simplify file splice
  ovl: make ioctl() safe
  ovl: check privs before decoding file handle
  vfs: verify source area in vfs_dedupe_file_range_one()
  vfs: move cap_convert_nscap() call into vfs_setxattr()
  ovl: fix incorrect extent info in metacopy case
  ovl: expand warning in ovl_d_real()
  ovl: document lower modification caveats
  ovl: warn about orphan metacopy
  ovl: doc clarification
  ovl: introduce new "uuid=off" option for inodes index feature
  ovl: propagate ovl_fs to ovl_decode_real_fh and ovl_encode_real_fh

Pull fuse updates from Miklos Szeredi:

 - Improve performance of virtio-fs in mixed read/write workloads

 - Try to revalidate cache before returning EEXIST on exclusive create

 - Add a couple of miscellaneous bug fixes as well as some code cleanups

* tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix bad inode
  fuse: support SB_NOSEC flag to improve write performance
  fuse: add a flag FUSE_OPEN_KILL_SUIDGID for open() request
  fuse: don't send ATTR_MODE to kill suid/sgid for handle_killpriv_v2
  fuse: setattr should set FATTR_KILL_SUIDGID
  fuse: set FUSE_WRITE_KILL_SUIDGID in cached write path
  fuse: rename FUSE_WRITE_KILL_PRIV to FUSE_WRITE_KILL_SUIDGID
  fuse: introduce the notion of FUSE_HANDLE_KILLPRIV_V2
  fuse: always revalidate if exclusive create
  virtiofs: clean up error handling in virtio_fs_get_tree()
  fuse: add fuse_sb_destroy() helper
  fuse: simplify get_fuse_conn*()
  fuse: get rid of fuse_mount refcount
  virtiofs: simplify sb setup
  virtiofs fix leak in setup
  fuse: launder page should wait for page writeback

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've made more work into per-file compression support.

  For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to
  change the algorithm or cluster size per file. F2FS_IOC_COMPRESS |
  DECOMPRESS_FILE provides a way to compress and decompress the existing
  normal files manually.

  There is also a new mount option, compress_mode=fs|user, which can
  control who compresses the data.

  Chao also added a checksum feature with a mount option so that
  we are able to detect any corrupted cluster.

  In addition, Daniel contributed casefolding with encryption patch,
  which will be used for Android devices.

  Summary:

  Enhancements:
   - add ioctls and mount option to manage per-file compression feature
   - support casefolding with encryption
   - support checksum for compressed cluster
   - avoid IO starvation by replacing mutex with rwsem
   - add sysfs, max_io_bytes, to control max bio size

  Bug fixes:
   - fix use-after-free issue when compression and fsverity are enabled
   - fix consistency corruption during fault injection test
   - fix data offset for lseek
   - get rid of buffer_head which has 32bits limit in fiemap
   - fix some bugs in multi-partitions support
   - fix nat entry count calculation in shrinker
   - fix some stat information

  And, we've refactored some logics and fix minor bugs as well"

* tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits)
  f2fs: compress: fix compression chksum
  f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
  f2fs: fix race of pending_pages in decompression
  f2fs: fix to account inline xattr correctly during recovery
  f2fs: inline: fix wrong inline inode stat
  f2fs: inline: correct comment in f2fs_recover_inline_data
  f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
  f2fs: convert to F2FS_*_INO macro
  f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
  f2fs: don't allow any writes on readonly mount
  f2fs: avoid race condition for shrinker count
  f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
  f2fs: add compress_mode mount option
  f2fs: Remove unnecessary unlikely()
  f2fs: init dirty_secmap incorrectly
  f2fs: remove buffer_head which has 32bits limit
  f2fs: fix wrong block count instead of bytes
  f2fs: use new conversion functions between blks and bytes
  f2fs: rename logical_to_blk and blk_to_logical
  f2fs: fix kbytes written stat for multi-device case
  ...

Pull ext2, reiserfs, quota and writeback updates from Jan Kara:

 - a couple of quota fixes (mostly for problems found by syzbot)

 - several ext2 cleanups

 - one fix for reiserfs crash on corrupted image

 - a fix for spurious warning in writeback code

* tag 'for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  writeback: don't warn on an unregistered BDI in __mark_inode_dirty
  fs: quota: fix array-index-out-of-bounds bug by passing correct argument to vfs_cleanup_quota_inode()
  reiserfs: add check for an invalid ih_entry_count
  ext2: Fix fall-through warnings for Clang
  fs/ext2: Use ext2_put_page
  docs: filesystems: Reduce ext2.rst to one top-level heading
  quota: Sanity-check quota file headers on load
  quota: Don't overflow quota file offsets
  ext2: Remove unnecessary blank
  fs/quota: update quota state flags scheme with project quota flags

syzkaller shows that packets can still be dequeued while taprio_destroy()
is running. Let sch_taprio use the reset() function to cancel the advance
timer and drop all skbs from the child qdiscs.

Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler")
Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae
Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The indirect block cleanup may cause control messages to be sent
if offloaded flows are present. However, by the time the flower app
cleanup callback is called txbufs are no longer available and attempts
to send control messages result in a NULL-pointer dereference in
nfp_ctrl_tx_one().

This problem may be resolved by moving the indirect block cleanup
to the stop callback, where txbufs are still available.

As suggested by Jakub Kicinski and Louis Peens.

Fixes: a1db2178 ("net: flow_offload: fix flow_indr_dev_unregister path")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Link: https://lore.kernel.org/r/20201216145701.30005-1-simon.horman@netronome.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the check for an unmap PF error is always going to be false
because intr_val is a 32 bit int and is being bit-mask checked against
1ULL << 32.  Fix this by making intr_val a u64 to match the type at it
is copied from, namely npa_event_context->npa_af_rvu_ge.

Addresses-Coverity: ("Operands don't affect result")
Fixes: f1168d1e ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: George Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/r/20201216123604.15369-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull fsnotify updates from Jan Kara:
 "A few fsnotify fixes from Amir fixing fallout from big fsnotify
  overhaul a few months back and an improvement of defaults limiting
  maximum number of inotify watches from Waiman"

* tag 'fsnotify_for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: fix events reported to watching parent and child
  inotify: convert to handle_inode_event() interface
  fsnotify: generalize handle_inode_event()
  inotify: Increase default inotify.max_user_watches limit to 1048576

There is a spelling mistake in the Kconfig. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201216120020.13149-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Return -EINVAL if we can't find the correct device.  Currently it
returns success.

Fixes: 13159183 ("qlcnic: 83xx base driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwandaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Paolo Abeni says:

====================
mptcp: a bunch of assorted fixes

This series pulls a few fixes for the MPTCP datapath.
Most issues addressed here has been recently introduced
with the recent reworks, with the notable exception of
the first patch, which addresses an issue present since
the early days
====================

Link: https://lore.kernel.org/r/cover.1608114076.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When sendmsg() needs to wait for memory, the pending data
is not updated. That causes a drift in forward memory allocation,
leading to stall and/or warnings at socket close time.

This change addresses the above issue moving the pending data
counter update inside the sendmsg() main loop.

Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When multiple subflows are active, we can receive a
window update on subflow with no write space available.
MPTCP will try to push frames on such subflow and will
fail. Pending frames will be pushed only after receiving
a window update on a subflow with some wspace available.

Overall the above could lead to suboptimal aggregate
bandwidth usage.

Instead, we should try to push pending frames as soon as
the subflow reaches both conditions mentioned above.

We can finally enable self-tests with asymmetric links,
as the above makes them finally pass.

Fixes: 6f8a612a ("mptcp: keep track of advertised windows right edge")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MPTCP closes the subflows while holding the msk-level lock.
While acquiring the subflow socket lock we need to use the
correct nested annotation, or we can hit a lockdep splat
at runtime.
Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Fixes: e16163b6 ("mptcp: refactor shutdown and close")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently MPTCP is not propagating the security context
from the ingress request socket to newly created msk
at clone time.

Address the issue invoking the missing security helper.

Fixes: cf7da0d6 ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MLX5_GENERAL_OBJECT_TYPES types bitfield is 64-bit field.

Defining an enum for such bit fields on 32-bit platform results in below
warning.

./include/vdso/bits.h:7:26: warning: left shift count >= width of type [-Wshift-count-overflow]
                         ^
./include/linux/mlx5/mlx5_ifc.h:10716:46: note: in expansion of macro ‘BIT’
 MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_SAMPLER = BIT(0x20),
                                             ^~~

Use 32-bit friendly BIT_ULL macro.

Fixes: 2a297089 ("net/mlx5: Add sample offload hardware bits and structures")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20201213120641.216032-1-leon@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 991fcb77 ("drm/edid: Fix uninitialized variable in
drm_cvt_modes()") just replaced one warning with another.

The original warning about a possibly uninitialized variable was due to
the compiler not being smart enough to see that the case statement
actually enumerated all possible cases.  And the initial fix was just to
add a "default" case that had a single "unreachable()", just to tell the
compiler that that situation cannot happen.

However, that doesn't actually fix the fundamental reason for the
problem: the compiler still doesn't see that the existing case
statements enumerate all possibilities, so the compiler will still
generate code to jump to that unreachable case statement.  It just won't
complain about an uninitialized variable any more.

So now the compiler generates code to our inline asm marker that we told
it would not fall through, and end end result is basically random.  We
have created a bridge to nowhere.

And then, depending on the random details of just exactly what the
compiler ends up doing, 'objtool' might end up complaining about the
conditional branches (for conditions that cannot happen, and that thus
will never be taken - but if the compiler was not smart enough to figure
that out, we can't expect objtool to do so) going off in the weeds.

So depending on how the compiler has laid out the result, you might see
something like this:

    drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0()

and now you have a truly inscrutable warning that makes no sense at all
unless you start looking at whatever random code the compiler happened
to generate for our bare "unreachable()" statement.

IOW, don't use "unreachable()" unless you have an _active_ operation
that generates code that actually makes it obvious that something is not
reachable (ie an UD instruction or similar).

Solve the "compiler isn't smart enough" problem by just marking one of
the cases as "default", so that even when the compiler doesn't otherwise
see that we've enumerated all cases, the compiler will feel happy and
safe about there always being a valid case that initializes the 'width'
variable.

This also generates better code, since now the compiler doesn't generate
comparisons for five different possibilities (the four real ones and the
one that can't happen), but just for the three real ones and "the rest"
(which is that last one).

A smart enough compiler that sees that we cover all the cases won't care.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To 2.30
Signed-off-by: Steve French <stfrench@microsoft.com>

When remounting with the new mount API, we need to set
rsize and wsize to the previous values if they are not passed
in on the remount. Otherwise they get set to zero which breaks
xfstest 452 for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>

Currently pmac32_defconfig with SMP=y doesn't build:

  arch/powerpc/platforms/powermac/smp.c:
  error: implicit declaration of function 'cleanup_cpu_mmu_context'

It would be nice for consistency if all platforms clear mm_cpumask and
flush TLBs on unplug, but the TLB invalidation bug described in commit
01b0f0ea ("powerpc/64s: Trim offlined CPUs from mm_cpumasks") only
applies to 64s and for now we only have the TLB flush code for that
platform.

So just add an empty version for 32-bit Book3S.

Fixes: 01b0f0ea ("powerpc/64s: Trim offlined CPUs from mm_cpumasks")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Change log based on comments from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull ARM SoC OMAP GenPD updates from Arnd Bergmann:
 "These are additional updates for the power domain support on OMAP,
  moving to an implementation based on device tree information instead
  of SoC specific code. This is the latest step in the ongoing process
  for moving code out of arch/arm/mach-omap2.

  I kept this separate from the other driver changes since it touches
  code in multiple areas"

* tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
  ARM: OMAP2+: Fix am4 only build after genpd changes
  ARM: dts: Configure power domain for omap5 dss
  ARM: dts: omap5: add remaining PRM instances
  soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances
  ARM: OMAP2+: Drop legacy platform data for dra7 gpmc
  ARM: dts: Configure interconnect target module for dra7 iva
  ARM: dts: dra7: add remaining PRM instances
  soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances
  clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks
  ARM: OMAP2+: Drop legacy platform data for omap4 gpmc
  ARM: OMAP2+: Drop legacy platform data for omap4 iva
  ARM: dts: Configure power domain for omap4 dsp
  ARM: dts: Configure power domain for omap4 dss
  ARM: dts: omap4: add remaining PRM instances
  soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances
  clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks
  ARM: OMAP2+: Drop legacy remaining legacy platform data for am4
  ARM: dts: Use simple-pm-bus for genpd for am4 l3
  ARM: dts: Move am4 l3 noc to a separate node
  ARM: dts: Use simple-pm-bus for genpd for am4 l4_per
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are a couple of subsystems maintained by other people that merge
  their drivers through the SoC tree, those changes include:

   - The SCMI firmware framework gains support for sensor notifications
     and for controlling voltage domains.

   - A large update for the Tegra memory controller driver, integrating
     it better with the interconnect framework

   - The memory controller subsystem gains support for Mediatek MT8192

   - The reset controller framework gains support for sharing pulsed
     resets

  For Soc specific drivers in drivers/soc, the main changes are

   - The Allwinner/sunxi MBUS gets a rework for the way it handles
     dma_map_ops and offsets between physical and dma address spaces.

   - An errata fix plus some cleanups for Freescale Layerscape SoCs

   - A cleanup for renesas drivers regarding MMIO accesses.

   - New SoC specific drivers for Mediatek MT8192 and MT8183 power
     domains

   - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
     identification.

   - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
     SDX55.

   - A rework of the TI AM33xx 'genpd' power domain support to use
     information from DT instead of platform data

   - Support for TI AM64x SoCs

   - Allow building some Amlogic drivers as modules instead of built-in

  Finally, there are numerous cleanups and smaller bug fixes for
  Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
  Renesas, and Xilinx SoCs"

* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
  soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message
  clk: samsung: mark PM functions as __maybe_unused
  soc: samsung: exynos-chipid: initialize later - with arch_initcall
  soc: samsung: exynos-chipid: order list of SoCs by name
  memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
  memory: ti-emif-sram: only build for ARMv7
  memory: tegra30: Support interconnect framework
  memory: tegra20: Support hardware versioning and clean up OPP table initialization
  dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
  soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
  reset-controller: ti: force the write operation when assert or deassert
  ...

Pull ARM device tree updates from Arnd Bergmann:
 "Across all platforms, there is a continued move towards DT schema for
  validating the dts files. As a result there are bug fixes for mistakes
  that are found using these schema, in addition to warnings from the
  dtc compiler.

  As usual, many changes are for adding support for additional on-chip
  and on-board components in the machines we already support.

  The newly supported SoCs for this release are:

   - MStar Infinity2M, a low-end IP camera chip based on a dual-core
     Cortex-A7, otherwise similar to the Infinity chip we already
     support. This is also known as the SigmaStar SSD202D, and we add
     support for the Honestar ssd201htv2 development kit.

   - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
     (BMC), in the same family as the NPCM750. This gets used in the
     Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
     which are added as well.

   - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
     Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
     GT-AC5300 high-end WiFi router based on this chip.

   - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
     meant for faster Chromebooks and tablets. It gets added along with
     its reference design.

   - Mediatek MT6779 (Helio P90) is a high-end phone chip from last
     year's generation, also added along with its reference board. This
     one is still based on Cortex-A75/A55.

   - Mediatek MT8167 is a version of the already supported MT8516 chip,
     both based on Cortex-A35. It gets added along with the "Pumpkin"
     single board computer, but is likely to also make its way into
     low-end tablets in the future.

  For the already supported chips, there are a number of new boards.
  Interestingly there are more 32-bit machines added this time than
  64-bit. Here is a brief list of the new boards:

   - Three new Mikrotik router variants based on Marvell Prestera
     98DX3236, a close relative of the more common Armada XP

   - A reference board for the Marvell Armada 382

   - Three new servers using ASpeed baseboard management controllers,
     the actual machines being from Bytedance, Facebook and IBM, and one
     machine using the Nuvoton NPCM750 BMC.

   - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.

   - The usual set of 32-bit i.MX industrial/embedded hardware:
       * Protonic WD3 (tractor e-cockpit)
       * Kamstrup OMNIA Flex Concentrator (smart grid platform)
       * Van der Laan LANMCU (food storage)
       * Altesco I6P (vehicle inspection stations)
       * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard

   - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
     aleady supported DHCOM module

   - Three new Allwinner SoC based single-board computers:
       * NanoPi R1 (H3 based)
       * FriendlyArm ZeroPi (H3 based)
       * Elimo Initium SBC (S3 based)

   - Ouya Game Console based on Nvidia Tegra 3

   - Version 5 of the already supported Zynq Z-Turn MYIR Board

   - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
     is a repackaged 16-core LX2160A

   - A series of Kontron i.MX8M Mini baseboard/SoM versions

   - Espressobin Ultra, a new variant of the popular Armada 3700 based
     board,

   - IEI Puzzle-M801, a rackmount network appliance based on Marvell
     Armada 8040

   - Microsoft Lumia 950 XL, a phone

   - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
     sm8150, respectively

   - Three new board variants of the "Trogdor" Chromebook (sc7180)

   - New board variants of the Renesas based "Kingfisher" and "HiHope"
     reference boards

   - Kobol Helios64, an open source NAS appliance based on Rockchips
     RK3399

   - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
     carrier boards"

* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
  arm64: dts: sparx5: Add SGPIO devices
  arm64: dts: sparx5: Add reset support
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ARM: mstar: SMP support
  ARM: mstar: Wire up smpctrl for SSD201/SSD202D
  ARM: mstar: Add smp ctrl registers to infinity2m dtsi
  ARM: mstar: Add dts for Honestar ssd201htv2
  ARM: mstar: Add chip level dtsi for SSD202D
  ARM: mstar: Add common dtsi for SSD201/SSD202D
  ARM: mstar: Add infinity2m support
  dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
  dt-bindings: vendor-prefixes: Add honestar vendor prefix
  dt-bindings: mstar: Add binding details for mstar,smpctrl
  ARM: mstar: Fill in GPIO controller properties for infinity
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: zynq: Fix incorrect reference to XM013 instead of XM011
  ARM: zynq: Convert at25 binding to new description on zc770-xm013
  ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
  ARM: zynq: Fix leds subnode name for zc702/zybo-z7
  ARM: zynq: Rename bus to be align with simple-bus yaml
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "These are the usual defconfig updates, adding support for additional
  modules and updating some files according to changes in Kconfig.

  I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
  architectures, after the driver was removed"

* tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
  powerpc/configs: drop unused BACKLIGHT_GENERIC option
  parisc: configs: drop unused BACKLIGHT_GENERIC option
  arm64: defconfig: drop unused BACKLIGHT_GENERIC option
  ARM: configs: drop unused BACKLIGHT_GENERIC option
  arm64: defconfig: Enable more Librem 5 hardware
  arm64: defconfig: Enable RTC_DRV_HYM8563
  arm64: defconfig: Enable USB_SERIAL_CP210X
  arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY
  arm64: defconfig: Enable ROCKCHIP_LVDS
  arm64: defconfig: Enable ARM SCMI protocol and drivers
  ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
  ARM: multi_v7_defconfig: enable STM32 dfsdm audio support
  ARM: multi_v7_defconfig: enable STM32 spdifrx support
  ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support
  ARM: multi_v7_defconfig: add STM32 crypto support
  ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers
  ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module
  arm64: defconfig: Enable Qualcomm PON driver
  ARM: omap2plus_defconfig: Enable TI eQEP counter driver
  ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  ...