Test all the supported arguments for FDB flush. The test checks
configuration, not traffic. Note that the flag 'offloaded' is not checked
as it is not relevant when there is no hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination IP. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination IP is an attribute of
the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination IP', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.1 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 1000 self permanent

When user flush by destination IP x, only the relevant remotes will be
flushed:
$ bridge fdb flush dev vx10 dst 192.1.1.1

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination port. FDB entry
is stored as {MAC, SRC_VNI} + remote. The destination port is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination port', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent

When user flush by port x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 port 1111

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination VNI. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination VNI is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination VNI', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.2 vni 2000 self permanent

When user flush by VNI x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 vni 2000

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by nexthop ID.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by source VNI.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The merge commit 92716869 ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver only, the VXLAN driver does
not support such flushing. Extend VXLAN driver to support FDB flushing.
In this commit, add support for flushing with state and flags, which are
the fields that supported in the bridge driver.

Note that bridge driver supports 'NTF_USE' flag, but there is no point to
support this flag for flushing as it is ignored when flags are stored.
'NTF_STICKY' is not relevant for VXLAN driver.

'NTF_ROUTER' is not supported in bridge driver for flush as it is not
relevant for bridge, add it for VXLAN.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the function vxlan_flush() does not flush the default FDB entry
(an entry with all_zeros_mac and default VNI), as it is deleted at
vxlan_uninit(). When this function will be used for flushing FDB entries
from user space, it will have to flush also the default entry in case that
other parameters match (e.g., VNI, flags).

Extend 'struct vxlan_fdb_flush_desc' to include an indication whether
the default entry should be flushed or not. The default value (false)
indicates to flush it, adjust all the existing callers to set
'.ignore_default_entry' to true, so the current behavior will not be
changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function vxlan_flush() gets a boolean called 'do_all' and in case
that it is false, it does not flush entries with state 'NUD_PERMANENT'
or 'NUD_NOARP'. The following patches will add support for FDB flush
with parameters from user space. Make the function more generic, so it
can be used later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The merge commit 92716869 ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver. The following patches
will extend VXLAN driver to support FDB flushing as well. The netlink
message for bulk delete is shared between the drivers. With the existing
implementation, there is no way to prevent user from flushing with
attributes that are not supported per driver. For example, when VNI will
be added, user will not get an error for flush FDB entries in bridge
with VNI, although this attribute is not relevant for bridge.

As preparation for support of FDB flush in VXLAN driver, move the policy
to be handled in bridge driver, later a new policy for VXLAN will be
added in VXLAN driver. Do not pass 'vid' as part of ndo_fdb_del_bulk(),
as this field is relevant only for bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

kernel/bpf/verifier.c
  82995598 ("bpf: Fix verifier log for async callback return values")
  a923819f ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from CAN and BPF.

  We have a regression in TC currently under investigation, otherwise
  the things that stand off most are probably the TCP and AF_PACKET
  fixes, with both issues coming from 6.5.

  Previous releases - regressions:

   - af_packet: fix fortified memcpy() without flex array.

   - tcp: fix crashes trying to free half-baked MTU probes

   - xdp: fix zero-size allocation warning in xskq_create()

   - can: sja1000: always restart the tx queue after an overrun

   - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp

   - eth: nfp: avoid rmmod nfp crash issues

   - eth: octeontx2-pf: fix page pool frag allocation warning

  Previous releases - always broken:

   - mctp: perform route lookups under a RCU read-side lock

   - bpf: s390: fix clobbering the caller's backchain in the trampoline

   - phy: lynx-28g: cancel the CDR check work item on the remove path

   - dsa: qca8k: fix qca8k driver for Turris 1.x

   - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()

   - eth: ixgbe: fix crash with empty VF macvlan list"

* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  rswitch: Fix imbalance phy_power_off() calling
  rswitch: Fix renesas_eth_sw_remove() implementation
  octeontx2-pf: Fix page pool frag allocation warning
  nfc: nci: assert requested protocol is valid
  af_packet: Fix fortified memcpy() without flex array.
  net: tcp: fix crashes trying to free half-baked MTU probes
  net/smc: Fix pos miscalculation in statistics
  nfp: flower: avoid rmmod nfp crash issues
  net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
  ethtool: Fix mod state of verbose no_mask bitset
  net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
  mctp: perform route lookups under a RCU read-side lock
  net: skbuff: fix kernel-doc typos
  s390/bpf: Fix unwinding past the trampoline
  s390/bpf: Fix clobbering the caller's backchain in the trampoline
  net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
  net/smc: Fix dependency of SMC on ISM
  ixgbe: fix crash with empty VF macvlan list
  net/mlx5e: macsec: use update_pn flag instead of PN comparation
  net: phy: mscc: macsec: reject PN update requests
  ...

Pull ARM SoC fixes from Arnd Bergmann:
 "AngeloGioacchino Del Regno is stepping in as co-maintainer for the
  MediaTek SoC platform and starts by sending some dts fixes for the
  mt8195 platform that had been pending for a while.

  On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
  reflecting that Linus Walleij has been handling this on his own for
  the past few years.

  Generic RISC-V kernels are now marked as incompatible with the RZ/Five
  platform that requires custom hacks both for managing its DMA bounce
  buffers and for addressing low virtual memory.

 Finally, there is one bugfix for the AMDTEE firmware driver to prevent
 a use-after-free bug"

* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  IXP4xx MAINTAINERS entries
  arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
  arm64: dts: mediatek: fix t-phy unit name
  arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
  arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
  MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
  soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
  tee: amdtee: fix use-after-free vulnerability in amdtee_close_session

Pull pmdomain fix from Ulf Hansson:

 - imx: scu-pd: Correct the DMA2 channel

* tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: imx: scu-pd: correct DMA2 channel

Pull pin control fixes from Linus Walleij:
 "Some pin control fixes for v6.6 which have been stacking up in my
  tree.

  Dmitry's fix to some locking in the core is the most substantial, that
  was a really neat fix.

  The rest is the usual assorted spray of minor driver fixes.

   - Drop some minor code causing warnings in the Lantiq driver

   - Fix out of bounds write in the Nuvoton driver

   - Fix lost IRQs with CONFIG_PM in the Starfive driver

   - Fix a locking issue in find_pinctrl()

   - Revert a regressive Tegra debug patch

   - Fix the Renesas RZN1 pin muxing"

* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: renesas: rzn1: Enable missing PINMUX
  Revert "pinctrl: tegra: Add support to display pin function"
  pinctrl: avoid unsafe code pattern in find_pinctrl()
  pinctrl: starfive: jh7110: Add system pm ops to save and restore context
  pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
  pinctrl: nuvoton: wpcm450: fix out of bounds write
  pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()

gcc 12 errors out with:
net/core/gso_test.c:58:48: error: initializer element is not constant
   58 |                 .segs = (const unsigned int[]) { gso_size },

This version isn't old (2022), so switch to preprocessor-bsaed constant
instead of 'static const int'.

Cc: Willem de Bruijn <willemb@google.com>
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/netdev/79fbe35c-4dd1-4f27-acb2-7a60794bc348@linux.vnet.ibm.com/
Fixes: 1b4fa28a ("net: parametrize skb_segment unit test to expand coverage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231012120901.10765-1-fw@strlen.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add the configuration of CHACHA20-POLY1305 to the driver and send the
message to hardware so that the NIC supports the algorithm.
Signed-off-by: Shihong Wang <shihong.wang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20231009080946.7655-2-louis.peens@corigine.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Update MAINTAINERS entries for Intel IXP4xx SoCs.

Linus has been handling all IXP4xx stuff since 2019 or so.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Deepak Saxena <dsaxena@plexity.net>
Link: https://lore.kernel.org/r/m3ttqxu4ru.fsf@t19.piap.plSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Yoshihiro Shimoda says:

====================
rswitch: Fix issues on specific conditions

This patch series fix some issues of rswitch driver on specific
condtions.
====================

Link: https://lore.kernel.org/r/20231010124858.183891-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().

Fixes: 5cb63092 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.

Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.

Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
   value 8196 cmode runtime
2. ifconfig eth0 up

[   19.901356] ------------[ cut here ]------------
[   19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[   19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[   19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[   19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901460] sp : ffff80000f66b970
[   19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[   19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[   19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[   19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[   19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[   19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[   19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[   19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[   19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[   19.901487] Call trace:
[   19.901488]  page_pool_alloc_frag+0x3c/0x230
[   19.901490]  __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[   19.901494]  otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[   19.901498]  otx2_open+0x228/0xa70 [rvu_nicpf]
[   19.901501]  otx2vf_open+0x20/0xd0 [rvu_nicvf]
[   19.901504]  __dev_open+0x114/0x1d0
[   19.901507]  __dev_change_flags+0x194/0x210
[   19.901510]  dev_change_flags+0x2c/0x70
[   19.901512]  devinet_ioctl+0x3a4/0x6c4
[   19.901515]  inet_ioctl+0x228/0x240
[   19.901518]  sock_ioctl+0x2ac/0x480
[   19.901522]  __arm64_sys_ioctl+0x564/0xe50
[   19.901525]  invoke_syscall.constprop.0+0x58/0xf0
[   19.901529]  do_el0_svc+0x58/0x150
[   19.901531]  el0_svc+0x30/0x140
[   19.901533]  el0t_64_sync_handler+0xe8/0x114
[   19.901535]  el0t_64_sync+0x1a0/0x1a4
[   19.901537] ---[ end trace 678c0bf660ad8116 ]---

Fixes: b2e3406a ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The protocol is used in a bit mask to determine if the protocol is
supported. Assert the provided protocol is less than the maximum
defined so it doesn't potentially perform a shift-out-of-bounds and
provide a clearer error for undefined protocols vs unsupported ones.

Fixes: 6a2968aa ("NFC: basic NCI protocol implementation")
Reported-and-tested-by: syzbot+0839b78e119aae1fec78@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0839b78e119aae1fec78Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009200054.82557-1-jeremy@jcline.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sergei Trofimovich reported a regression [0] caused by commit a0ade840
("af_packet: Fix warning of fortified memcpy() in packet_getname().").

It introduced a flex array sll_addr_flex in struct sockaddr_ll as a
union-ed member with sll_addr to work around the fortified memcpy() check.

However, a userspace program uses a struct that has struct sockaddr_ll in
the middle, where a flex array is illegal to exist.

  include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t'
     24 |                 __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex);
        |                 ^~~~~~~~~~~~~~~~~~~~

To fix the regression, let's go back to the first attempt [1] telling
memcpy() the actual size of the array.
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0]
Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1]
Fixes: a0ade840 ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO
pins will be configured as specified by the pinmux in the DTS.

This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS,
however that was removed, since the RZ/N1 driver does not call any of
the generic pinmux functions.

Fixes: 1308fb4e ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.orgSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Florian Westphal says:

====================
netfilter updates for next

First 5 patches, from Phil Sutter, clean up nftables dumpers to
use the context buffer in the netlink_callback structure rather
than a kmalloc'd buffer.

Patch 6, from myself, zaps dead code and replaces the helper function
with a small inlined helper.

Patch 7, also from myself, removes another pr_debug and replaces it
with the existing nf_log-based debug helpers.

Last patch, from George Guo, gets nft_table comments back in
sync with the structure members.

* tag 'nf-next-23-10-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: cleanup struct nft_table
  netfilter: conntrack: prefer tcp_error_log to pr_debug
  netfilter: conntrack: simplify nf_conntrack_alter_reply
  netfilter: nf_tables: Don't allocate nft_rule_dump_ctx
  netfilter: nf_tables: Carry s_idx in nft_rule_dump_ctx
  netfilter: nf_tables: Carry reset flag in nft_rule_dump_ctx
  netfilter: nf_tables: Drop pointless memset when dumping rules
  netfilter: nf_tables: Always allocate nft_rule_dump_ctx
====================

Link: https://lore.kernel.org/r/20231010145343.12551-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace if condition of napi_schedule_prep/__napi_schedule and use bool
from napi_schedule directly where possible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231009133754.9834-5-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rework network interface logic. Before this change, the code flow was:
1. Disable interrupt
2. Try to schedule a NAPI
3. Check if it was possible (NAPI is not already scheduled)
4. emit BUG() if we receive interrupt while a NAPI is scheduled

If some application busy poll or set gro_flush_timeout low enough, it's
possible to reach the BUG() condition. Given that the condition may
happen and it wouldn't be a bug, rework the logic to permit such case
and prevent stall with interrupt never enabled again.

Disable the interrupt only if the NAPI can be scheduled (aka it's not
already scheduled) and drop the printk and BUG() call. With these
change, in the event of a NAPI already scheduled, the interrupt is
simply ignored with nothing done.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231009133754.9834-4-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now that napi_schedule return a bool, we can drop napi_reschedule that
does the same exact function. The function comes from a very old commit
bfe13f54 ("ibm_emac: Convert to use napi_struct independent of struct
net_device") and the purpose is actually deprecated in favour of
different logic.

Convert every user of napi_reschedule to napi_schedule.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # ath10k
Acked-by: Nick Child <nnac123@linux.ibm.com> # ibm
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for can/dev/rx-offload.c
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change napi_schedule to return a bool on NAPI successful schedule.
This might be useful for some driver to do additional steps after a
NAPI has been scheduled.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231009133754.9834-2-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace drivers that still use napi_schedule_prep/__napi_schedule
with napi_schedule helper as it does the same exact check and call.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231009133754.9834-1-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

bfa_ioc_get_adapter_manufacturer() simply copies a string literal into
`manufacturer`.

Another implementation of bfa_ioc_get_adapter_manufacturer() from
drivers/scsi/bfa/bfa_ioc.c uses memset + strscpy:
|	void
|	bfa_ioc_get_adapter_manufacturer(struct bfa_ioc_s *ioc, char *manufacturer)
|	{
|		memset((void *)manufacturer, 0, BFA_ADAPTER_MFG_NAME_LEN);
|			strscpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
|	}

Let's use `strscpy_pad` to eliminate some redundant work while still
NUL-terminating and NUL-padding the destination buffer.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-ethernet-brocade-bna-bfa_ioc-c-v2-1-78e0f47985d3@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-lantiq_gswip-c-v1-1-d55a986a14cc@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-mt7530-c-v1-1-ec6677a6436a@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_stream_alloc_skb() initializes the skb to use tcp_tsorted_anchor
which is a union with the destructor. We need to clean that
TCP-iness up before freeing.

Fixes: 73601329 ("tcp: let tcp_mtu_probe() build headless packets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010173651.3990234-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

We expect `irqname` to be NUL-terminated based on its use with
of_irq_get_byname() -> of_property_match_string() wherein it is used
with a format string and a `strcmp`:
|       pr_debug("comparing %s with %s\n", string, p);
|       if (strcmp(string, p) == 0)
|               return i; /* Found it; return index */

NUL-padding is not required as is evident by other assignments to
`irqname` which do not NUL-pad:
|       if (port->flags & MVPP2_F_DT_COMPAT)
|               snprintf(irqname, sizeof(irqname), "tx-cpu%d", i);
|       else
|               snprintf(irqname, sizeof(irqname), "hif%d", i);

Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231010-strncpy-drivers-net-ethernet-marvell-mvpp2-mvpp2_main-c-v1-1-51be96ad0324@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

We can see that linfo->lmac_type is expected to be NUL-terminated based
on the `... - 1`'s present in the current code. Presumably making room
for a NUL-byte at the end of the buffer.

Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.

Let's also prefer the more idiomatic strscpy usage of (dest, src,
sizeof(dest)) rather than (dest, src, SOME_LEN).

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231010-strncpy-drivers-net-ethernet-marvell-octeontx2-af-cgx-c-v1-1-a443e18f9de8@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2023-10-10

Just one small fix this time around.

Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe
function.

* tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
  ieee802154: ca8210: Fix a potential UAF in ca8210_probe
====================

Link: https://lore.kernel.org/r/20231010200943.82225-1-stefan@datenfreihafen.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull quota regression fix from Jan Kara.

* tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Fix slow quotaoff

Pull btrfs fixes from David Sterba:
 "A revert of recent mount option parsing fix, this breaks mounts with
  security options.

  The second patch is a flexible array annotation"

* tag 'for-6.6-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: add __counted_by for struct btrfs_delayed_item and use struct_size()
  Revert "btrfs: reject unknown mount options early"