- 19 Oct, 2017 2 commits
-
-
Ville Syrjälä authored
Introduce intel_ddi_get_buf_trans_hdmi() and start using it where we can. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-3-ville.syrjala@linux.intel.comReviewed-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com>
-
Ville Syrjälä authored
We'll want to use the intel_ddi_get_buf_trans_*() functions a bit earlier in the file, so move them up. While at it start using them in the iboost setup to get rid of the platform checks there. v2: Rebase due to BDW FDI buf trans fix Signed-off-by:
-
- 18 Oct, 2017 10 commits
-
-
Chris Wilson authored
After being requested to idle the GPU, flush the idle worker to drop the residual active state, and any internal object caches. v2: By popular demand, introduce DROP_IDLE for fine-grained control from userspace, though it should be used as part of a DROP_ACTIVE | DROP_RETIRE | DROP_IDLE | DROP_FREED sequence. v3: Convert to BIT() to sell it to Joonas. References: https://bugs.freedesktop.org/show_bug.cgi?id=102655Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171018121621.10824-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Juha-Pekka Heikkila authored
This is to use clipped y coordinate here. I left get_crtc_fence_y_offset() function itself in place as oneliner to maintain comment above it why this is done. Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
Juha-Pekka Heikkila authored
Don't handle skylake primary plane separately as it is similar plane as the others. Signed-off-by:
-
Juha-Pekka Heikkila authored
Don't handle skylake primary plane separately as it is similar plane as the others. Signed-off-by:
-
Juha-Pekka Heikkila authored
Move u32 dspaddr_offset from struct intel_crtc member into local variable in i9xx_update_primary_plane() Signed-off-by:
-
Juha-Pekka Heikkila authored
Move adjusted_x/y from crtc to fbc cache. Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017065304.3358-1-joonas.lahtinen@linux.intel.com
-
Harsha Sharma authored
Replace instances of drm_framebuffer_reference/unreference() with *_get/put() suffixes and drm_dev_unref with *_put() suffix because get/put is shorter and consistent with the kernel use of *_get/put suffixes. Done with following coccinelle semantic patch @@ expression ex; @@ ( -drm_framebuffer_unreference(ex); +drm_framebuffer_put(ex); | -drm_dev_unref(ex); +drm_dev_put(ex); | -drm_framebuffer_reference(ex); +drm_framebuffer_get(ex); ) Signed-off-by:
Harsha Sharma <harshasharmaiitr@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171014183644.21990-1-harshasharmaiitr@gmail.com
-
Jani Nikula authored
Needed for timer_setup() and drm_dev_{get,put}() conversions in i915. Signed-off-by: -
Tvrtko Ursulin authored
Avoid dereferencing the error pointer and also avoid returning NULL from i915_mmu_notifier_find since the callers do not expect that. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7741b547 ("drm/i915: Preallocate our mmu notifier workequeu to unbreak cpu hotplug deadlock") Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
- 17 Oct, 2017 10 commits
-
-
Oscar Mateo authored
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important (although we probably aren't at the moment because 0 seems to be the default for all the other bits). v2: Extra parentheses (Michel) Fixes: 050fc465 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf") Fixes: 450174fe ("drm/i915/chv: Tune L3 SQC credits based on actual latencies") Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.comSigned-off-by:
-
Oscar Mateo authored
Now that we write RING_FORCE_TO_NONPRIV registers directly to hardware, [commit 32ced39c ("drm/i915: Transform whitelisting WAs into a simple reg write")] there is no need to save space for them in the list of context workarounds. v2: Refer to previous commit in commit message (Michel) Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508272071-15125-1-git-send-email-oscar.mateo@intel.comSigned-off-by:
-
Michal Wajdeczko authored
Debugfs for GuC and HuC load info have similar common part. Move and update dump of uc_fw to separate helper for reuse. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171017094449.22584-1-michal.wajdeczko@intel.comReviewed-by:
-
James Ausmus authored
Make intel_dp_add_mst_connector handle error returns from the drm_ calls. Add intel_connector_free to support cleanup on the error path. v2: Rename new function to avoid confusion, and simplify error paths (Ville) v3: Indentation fixup, style fixes (Ville) v4: Clarify usage of intel_connector_free, and fix usage of intel_connector_free v5: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
It should be impossible for these tests not to run due to an empty ppgtt, but if it should happen, let's report ENODEV (our typical internal error for impossible events). In file included from drivers/gpu/drm/i915/i915_gem.c:5415: drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_mock_ppgtt_huge_fill': >> drivers/gpu/drm/i915/selftests/huge_pages.c:612: error: 'err' may be used uninitialized in this function drivers/gpu/drm/i915/selftests/huge_pages.c: In function 'igt_ppgtt_exhaust_huge': drivers/gpu/drm/i915/selftests/huge_pages.c:1159: error: 'err' may be used uninitialized in this function Reported-by: kbuild-all@01.org Signed-off-by:
Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
When pwriting into shmemfs, the fast path pagecache_write does not notice when it is writing to beyond the end of the truncated shmemfs inode. Report -EFAULT directly when we try to use pwrite into the !I915_MADV_WILLNEED object. Fixes: 7c55e2c5 ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl") Testcase: igt/gem_madvise/dontneed-before-pwrite Signed-off-by:
-
Ville Syrjälä authored
Now that the infoframe hooks are part of the intel_dig_port, we can use the normal .write_infoframe() hook to update the VSC SDP. We do need to deal with the size difference between the VSC DIP and the others though. Another minor snag is that the compiler will complain to use if we keep using enum hdmi_infoframe_type type and passing in the DP define instead, so et's just change to unsigned int all over for the inforframe type. v2: Rebase due to other PSR changes Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Dave Airlie authored
In order to implement plane leasing we need to count things, just make the code consistent with the counting code currently used for counting crtcs/encoders/connectors and drop the need for num_overlay_planes. v2: don't forget to assign plane_ptr. (keithp) v3: use correct bounds check, found by igt. Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
https://github.com/jsarha/linuxDave Airlie authored
tilcdc changes for v4.15 * tag 'tilcdc-4.15' of https://github.com/jsarha/linux: drm/tilcdc: Remove redundant OF_DETACHED flag setting drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode() drm/tilcdc: Use tilcdc_crtc_shutdown() in tilcdc_crtc_destroy() drm/tilcdc: Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checks drm/tilcdc: Turn raster off in crtc reset, if it was on in the HW drm/tilcdc: switch to drm_*{get,put} helpers drm/tilcdc: tilcdc_tfp410: make of_device_ids const. drm/tilcdc: tilcdc_panel: make of_device_ids const.
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Quick 4.15 misc pull for the build fix: Cross-subsystem Changes: - piles an piles of misc/trivial patches all over, some more from outreachy applicants Core Changes: - build fix for the bridge/of cleanup (Maarten) - fix vblank count in arm_vblank_event (Ville) - some kerneldoc typo fixes from Thierry Driver Changes: - vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt) - sun4i: small cleanups and improved code comments all over (Chen-Yu Tsai) * tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits) drm/via: use ARRAY_SIZE drm/gma500: use ARRAY_SIZE drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits drm/sun4i: backend: Add comment explaining why registers are cleared drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory drm/sun4i: backend: Create regmap after access is possible drm/sun4i: don't add components that are already in the queue drm/vc4: Fix pitch setup for T-format scanout. drm/vc4: Move the DSI clock divider workaround closer to the clock call. drm: Replace kzalloc with kcalloc drm/tinydrm: Remove explicit .best_encoder assignment drm/tinydrm: Replace dev_error with DRM_DEV_ERROR drm/drm_of: Move drm_of_panel_bridge_remove_function into header. drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event() drm/atomic-helper: Fix typo drm: Add missing __user annotation to drm_syncobj_array_find() drm/rockchip: add PINCTRL dependency for LVDS drm/kirin: Checking for IS_ERR() instead of NULL driver:gpu: return -ENOMEM on allocation failure. ...
-
- 16 Oct, 2017 18 commits
-
-
Rodrigo Vivi authored
HDMI Mode selection on CNL is on CFGCR0 for that PLL, not on in a global CTRL1 as it was on SKL. The original patch addressed this difference, but leaving behind this single entry here. So we were checking the wrong bits during the PLL initialization and consequently avoiding the CFGCR1 setup during HDMI initialization. Luckly when only HDMI was in use BIOS had already setup this for us. But the dual display with hot plug were messed up. Fixes: a927c927 ("drm/i915/cnl: Initialize PLLs") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on the clock for the DDI and map the DPLL to the DDI" So we first do the map and then we unset DDI_CLK_OFF to turn the clock on. We do this in 2 separated steps. However, on this second step where we should only unset the off bit we are also unmapping the ddi from the pll. So we end up using the pll 0 for almost everything. Consequently breaking cases with more than one display. Fixes: 555e38d2 ("drm/i915/cnl: DDI - PLL mapping") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by:
-
Chris Wilson authored
In the intel_engine_cs dumper, we were showing the request details for the request queue but not of those requests already passed to the hw (just a summary of the seqno). If we show those details, we can then eliminate the entirely redundant and forgotten debugfs/i915_gem_request Signed-off-by:
Jeff McGee <jeff.mcgee@intel.com>
-
Chris Wilson authored
If we fail to recover the HW state upon resume (i.e. our attempt to clear the wedged bit and reset during i915_gem_sanitize() fails), then skip the HW restart inside i915_gem_init_hw(). We will ultimately do the HW restart when successfully unwedging and resetting the HW later, but attempting to restore a wedged device upon resume is risky as the HW is in an unknown state. v2: Suppress the error message when detecting the already wedged HW. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103240 Testcase: igt/gem_eio/in-flight-suspend Signed-off-by:
-
Chris Wilson authored
We free objects in bulk after they wait for their RCU grace period. Currently, we take struct_mutex and unbind all the objects. This can lead to a long lock duration during which time those objects have their pages unfreeable (i.e. the shrinker is prevented from reaping those pages). If we only process a single object under the struct_mutex and then free the pages, the number of objects locked away from the shrinker is minimal and we allow regular clients better access to struct_mutex if they need it. Signed-off-by:
-
Chris Wilson authored
Inspired by Tvrtko's critique of the reaping of the stale contexts before allocating a new one, also limit the freed object reaping to the oldest stale object before allocating a fresh object. Unlike contexts, objects may have radically different sizes of backing storage, but similar to contexts, while we want to prevent starvation due to excessive freed lists, we also do not want to delay fresh allocations for too long. Only freeing the oldest on the freed object list before each allocation is a reasonable compromise. v2: Only a single consumer of llist_del_first() is allowed (although multiple llist_add are still allowed in parallel). Unlike i915_gem_context, i915_gem_flush_free_objects() is itself not serialized and so we need to add our own spinlock. Otherwise KASAN eventually spots a use-after-free for the race on *first->next. Signed-off-by:
-
Chris Wilson authored
Prefer to defer activating our GEM shrinker until we have a few megabytes to free; or we have accumulated sufficient mempressure by deferring the reclaim to force a shrink. The intent is that because our objects may typically be large, we are too effective at shrinking and are not rewarded for freeing more pages than the batch. It will also defer the initial shrinking to hopefully put it at a lower priority than say the buffer cache (although it will balance out over a number of reclaims, with GEM being more bursty). v2: Give it a feedback system to try and tune the batch size towards an effective size for the available objects. v3: Start keeping track of shrinker stats in debugfs v4: Protect against finding no shrinkable objects (div-by-zero) Signed-off-by:
-
Chris Wilson authored
shrink_slab() allows us to report back the number of objects we successfully scanned (out of the target shrinkctl->nr_to_scan). As report the number of pages owned by each GEM object as a separate item to the shrinker, we cannot precisely control the number of shrinker objects we scan on each pass; and indeed may free more than requested. If we fail to tell the shrinker about the number of objects we process, it will continue to hold a grudge against us as any objects left unscanned are added to the next reclaim -- and so we will keep on "unfairly" shrinking our own slab in comparison to other slabs. v2: fixup the misplaced addition, we want to count everything we scan (to match the number we reported earlier) not just the objects we successfully validated and freed. References: 912d572d ("drm/i915: wire up shrinkctl->nr_scanned") Signed-off-by:
-
Chris Wilson authored
Remove the struct_mutex requirement around dev_priv->mm.bound_list and dev_priv->mm.unbound_list by giving it its own spinlock. This reduces one more requirement for struct_mutex and in the process gives us slightly more accurate unbound_list tracking, which should improve the shrinker - but the drawback is that we drop the retirement before counting so i915_gem_object_is_active() may be stale and lead us to underestimate the number of objects that may be shrunk (see commit bed50aea ("drm/i915/shrinker: Flush active on objects before counting")). v2: Crosslink the spinlock to the lists it protects, and btw this changes s/obj->global_link/obj->mm.link/ v3: Fix decoupling of old links in i915_gem_object_attach_phys() v3.1: Fix the fix, only unlink if it was linked v3.2: Use a local for to_i915(obj->base.dev)->mm.obj_lock Signed-off-by:
-
Chris Wilson authored
In the next patch, we want to reduce the lock coverage within the shrinker, and one of the dangerous walks we have is over obj->vma_list. We are only walking the obj->vma_list in order to check whether it has been permanently pinned by HW access, typically via use on the scanout. But we have a couple of other long term pins, the context objects for which we currently have to check the individual vma pin_count. If we instead mark these using obj->pin_display, we can forgo the dangerous and sometimes slow list iteration. v2: Rearrange code to try and avoid confusion from false associations due to arrangement of whitespace along with rebasing on obj->pin_global. Signed-off-by:
-
Chris Wilson authored
It has now lost its meaning (it shows more than just pin_display), I do not believe that we are using in preference to the complete listing from i915_gem_gtt, or the listing from i915_gem_framebuffer, or the listing of active display objects in i915_display_info. Signed-off-by:
-
Chris Wilson authored
In the next patch, we want to extend use of the global pin counter for semi-permanent pinning of context/ring objects. Given that we plan to extend the usage to encompass a disparate set of objects, we want a name that reflects both and should entail less confusion. Signed-off-by:
-
Chris Wilson authored
Since we occasionally stuff an error pointer into obj->mm.pages for a semi-permanent or even permanent failure, we have to be more careful and not just test against NULL when deciding if the object has a complete set of its concurrent pages. Signed-off-by:
-
Rodrigo Vivi authored
Apparently RC6 residency is lower than expected with EI mode for most of the cases on CNL A0, B0 and C0. This Wa doesn't solve our lower residency, but I believe it is better to have it since EI is not expected to work by HW engineers anyways. Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170822235828.18322-1-rodrigo.vivi@intel.com
-
Michal Wajdeczko authored
No functional change. Just place the function closer to related definitions. Signed-off-by:
-
Michal Wajdeczko authored
In case of GuC firmware loading failure we were reporting DRM_ERROR also for case when GuC loading was not strictly required. Signed-off-by:
-
Michal Wajdeczko authored
Firmware loading for GuC and HuC are similar. Move common code into generic function for maximum reuse. v2: change message levels (Chris) Signed-off-by:
-
Michal Wajdeczko authored
Some of the error messages from DMC load were too generic and may be confusing for the user. Lets explicitly add DMC words there. Also as homepage of DMC firmware is same as for the GuC and Huc, lets reuse URL definition. Signed-off-by:
-
