- 16 Sep, 2019 40 commits
-
-
Paulo Alcantara (SUSE) authored
[ Upstream commit 29fbeb7a ] Fix mount options comparison when serverino option is turned off later in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs mounts. Cc: stable@vger.kernel.org Signed-off-by:
Paulo Alcantara (SUSE) <paulo@paulo.ac> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilove@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Benjamin Block authored
[ Upstream commit 106d45f3 ] When tracing instances where we open and close WKA ports, we also pass the request-ID of the respective FSF command. But after successfully sending the FSF command we must not use the request-object anymore, as this might result in an use-after-free (see "zfcp: fix request object use-after-free in send path causing seqno errors" ). To fix this add a new variable that caches the request-ID before sending the request. This won't change during the hand-off to the FCP channel, and so it's safe to trace this cached request-ID later, instead of using the request object. Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Fixes: d27a7cb9 ("zfcp: trace on request for open and close of WKA port") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ajay Singh authored
[ Upstream commit 6419f818 ] For the error path in wilc_wlan_initialize(), the resources are not cleanup in the correct order. Reverted the previous changes and use the correct order to free during error condition. Fixes: b46d6882 ("staging: wilc1000: remove COMPLEMENT_BOOT") Cc: <stable@vger.kernel.org> Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Roman Bolshakov authored
[ Upstream commit 5676234f ] WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range. The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio. Fixes: c66ac9db ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: <stable@vger.kernel.org> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 80b045b3 ] Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>, use it. This patch does not change any functionality. Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Mike Salvatore authored
[ Upstream commit 156e4299 ] Each function that manipulates the aa_ext struct should reset it's "pos" member on failure. This ensures that, on failure, no changes are made to the state of the aa_ext struct. There are paths were elements are optional and the error path is used to indicate the optional element is not present. This means instead of just aborting on error the unpack stream can become unsynchronized on optional elements, if using one of the affected functions. Cc: stable@vger.kernel.org Fixes: 736ec752 ("AppArmor: policy routines for loading and unpacking policy") Signed-off-by:
Mike Salvatore <mike.salvatore@canonical.com> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Mike Marciniszyn authored
[ Upstream commit cf131a81 ] Heavy contention of the sde flushlist_lock can cause hard lockups at extreme scale when the flushing logic is under stress. Mitigate by replacing the item at a time copy to the local list with an O(1) list_splice_init() and using the high priority work queue to do the flushes. Fixes: 77241056 ("IB/hfi1: add driver files") Cc: <stable@vger.kernel.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jon Hunter authored
[ Upstream commit 9caec662 ] Currently the default clock rates for the HDA and HDA2CODEC_2X clocks are both 19.2MHz. However, the default rates for these clocks should actually be 51MHz and 48MHz, respectively. The current clock settings results in a distorted output during audio playback. Correct the default clock rates for these clocks by specifying them in the clock init table for Tegra210. Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Jon Hunter authored
[ Upstream commit 845d782d ] The maximum frequency supported for I2S on Tegra124 and Tegra210 is 24.576MHz (as stated in the Tegra TK1 data sheet for Tegra124 and the Jetson TX1 module data sheet for Tegra210). However, the maximum I2S frequency is limited to 24MHz because that is the maximum frequency of the audio sync clock. Increase the maximum audio sync clock frequency to 24.576MHz for Tegra124 and Tegra210 in order to support 24.576MHz for I2S. Update the tegra_clk_register_sync_source() function so that it does not set the initial rate for the sync clocks and use the clock init tables to set the initial rate instead. Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit 487317c9 ] We can not depend on the tcon->open_file_lock here since in multiuser mode we may have the same file/inode open via multiple different tcons. The current code is race prone and will crash if one user deletes a file at the same time a different user opens/create the file. To avoid this we need to have a spinlock attached to the inode and not the tcon. RHBZ: 1580165 CC: Stable <stable@vger.kernel.org> Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit 8eaf40c0 ] If a task is removing the block group that currently has the highest start offset amongst all existing block groups, there is a short time window where it races with a concurrent block group allocation, resulting in a transaction abort with an error code of EEXIST. The following diagram explains the race in detail: Task A Task B btrfs_remove_block_group(bg offset X) remove_extent_mapping(em offset X) -> removes extent map X from the tree of extent maps (fs_info->mapping_tree), so the next call to find_next_chunk() will return offset X btrfs_alloc_chunk() find_next_chunk() --> returns offset X __btrfs_alloc_chunk(offset X) btrfs_make_block_group() btrfs_create_block_group_cache() --> creates btrfs_block_group_cache object with a key corresponding to the block group item in the extent, the key is: (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) --> adds the btrfs_block_group_cache object to the list new_bgs of the transaction handle btrfs_end_transaction(trans handle) __btrfs_end_transaction() btrfs_create_pending_block_groups() --> sees the new btrfs_block_group_cache in the new_bgs list of the transaction handle --> its call to btrfs_insert_item() fails with -EEXIST when attempting to insert the block group item key (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) because task A has not removed that key yet --> aborts the running transaction with error -EEXIST btrfs_del_item() -> removes the block group's key from the extent tree, key is (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) A sample transaction abort trace: [78912.403537] ------------[ cut here ]------------ [78912.403811] BTRFS: Transaction aborted (error -17) [78912.404082] WARNING: CPU: 2 PID: 20465 at fs/btrfs/extent-tree.c:10551 btrfs_create_pending_block_groups+0x196/0x250 [btrfs] (...) [78912.405642] CPU: 2 PID: 20465 Comm: btrfs Tainted: G W 5.0.0-btrfs-next-46 #1 [78912.405941] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [78912.406586] RIP: 0010:btrfs_create_pending_block_groups+0x196/0x250 [btrfs] (...) [78912.407636] RSP: 0018:ffff9d3d4b7e3b08 EFLAGS: 00010282 [78912.407997] RAX: 0000000000000000 RBX: ffff90959a3796f0 RCX: 0000000000000006 [78912.408369] RDX: 0000000000000007 RSI: 0000000000000001 RDI: ffff909636b16860 [78912.408746] RBP: ffff909626758a58 R08: 0000000000000000 R09: 0000000000000000 [78912.409144] R10: ffff9095ff462400 R11: 0000000000000000 R12: ffff90959a379588 [78912.409521] R13: ffff909626758ab0 R14: ffff9095036c0000 R15: ffff9095299e1158 [78912.409899] FS: 00007f387f16f700(0000) GS:ffff909636b00000(0000) knlGS:0000000000000000 [78912.410285] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [78912.410673] CR2: 00007f429fc87cbc CR3: 000000014440a004 CR4: 00000000003606e0 [78912.411095] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [78912.411496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [78912.411898] Call Trace: [78912.412318] __btrfs_end_transaction+0x5b/0x1c0 [btrfs] [78912.412746] btrfs_inc_block_group_ro+0xcf/0x160 [btrfs] [78912.413179] scrub_enumerate_chunks+0x188/0x5b0 [btrfs] [78912.413622] ? __mutex_unlock_slowpath+0x100/0x2a0 [78912.414078] btrfs_scrub_dev+0x2ef/0x720 [btrfs] [78912.414535] ? __sb_start_write+0xd4/0x1c0 [78912.414963] ? mnt_want_write_file+0x24/0x50 [78912.415403] btrfs_ioctl+0x17fb/0x3120 [btrfs] [78912.415832] ? lock_acquire+0xa6/0x190 [78912.416256] ? do_vfs_ioctl+0xa2/0x6f0 [78912.416685] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [78912.417116] do_vfs_ioctl+0xa2/0x6f0 [78912.417534] ? __fget+0x113/0x200 [78912.417954] ksys_ioctl+0x70/0x80 [78912.418369] __x64_sys_ioctl+0x16/0x20 [78912.418812] do_syscall_64+0x60/0x1b0 [78912.419231] entry_SYSCALL_64_after_hwframe+0x49/0xbe [78912.419644] RIP: 0033:0x7f3880252dd7 (...) [78912.420957] RSP: 002b:00007f387f16ed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [78912.421426] RAX: ffffffffffffffda RBX: 000055f5becc1df0 RCX: 00007f3880252dd7 [78912.421889] RDX: 000055f5becc1df0 RSI: 00000000c400941b RDI: 0000000000000003 [78912.422354] RBP: 0000000000000000 R08: 00007f387f16f700 R09: 0000000000000000 [78912.422790] R10: 00007f387f16f700 R11: 0000000000000246 R12: 0000000000000000 [78912.423202] R13: 00007ffda49c266f R14: 0000000000000000 R15: 00007f388145e040 [78912.425505] ---[ end trace eb9bfe7c426fc4d3 ]--- Fix this by calling remove_extent_mapping(), at btrfs_remove_block_group(), only at the very end, after removing the block group item key from the extent tree (and removing the free space tree entry if we are using the free space tree feature). Fixes: 04216820 ("Btrfs: fix race between fs trimming and block group remove/allocation") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Shirish S authored
[ Upstream commit 517b91f4 ] [What] readptr read always returns zero, since most likely these blocks are either power or clock gated. [How] fetch rptr after amdgpu_ring_alloc() which informs the power management code that the block is about to be used and hence the gating is turned off. Signed-off-by:
Louis Li <Ching-shih.Li@amd.com> Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Louis Li authored
[ Upstream commit ce0e22f5 ] [What] vce ring test fails consistently during resume in s3 cycle, due to mismatch read & write pointers. On debug/analysis its found that rptr to be compared is not being correctly updated/read, which leads to this failure. Below is the failure signature: [drm:amdgpu_vce_ring_test_ring] *ERROR* amdgpu: ring 12 test failed [drm:amdgpu_device_ip_resume_phase2] *ERROR* resume of IP block <vce_v3_0> failed -110 [drm:amdgpu_device_resume] *ERROR* amdgpu_device_ip_resume failed (-110). [How] fetch rptr appropriately, meaning move its read location further down in the code flow. With this patch applied the s3 failure is no more seen for >5k s3 cycles, which otherwise is pretty consistent. V2: remove reduntant fetch of rptr Signed-off-by:
-
Peter Xu authored
[ Upstream commit 654f1f13 ] When assigning kvm irqfd we didn't check the irqchip mode but we allow KVM_IRQFD to succeed with all the irqchip modes. However it does not make much sense to create irqfd even without the kernel chips. Let's provide a arch-dependent helper to check whether a specific irqfd is allowed by the arch. At least for x86, it should make sense to check: - when irqchip mode is NONE, all irqfds should be disallowed, and, - when irqchip mode is SPLIT, irqfds that are with resamplefd should be disallowed. For either of the case, previously we'll silently ignore the irq or the irq ack event if the irqchip mode is incorrect. However that can cause misterious guest behaviors and it can be hard to triage. Let's fail KVM_IRQFD even earlier to detect these incorrect configurations. CC: Paolo Bonzini <pbonzini@redhat.com> CC: Radim Krčmář <rkrcmar@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Kent Russell authored
[ Upstream commit 0a5a9c27 ] This was added to amdgpu but was missed in amdkfd Signed-off-by:
Kent Russell <kent.russell@amd.com> Reviewed-by:
-
Eugeniy Paltsev authored
[ Upstream commit a8c715b4 ] As of today if userspace process tries to access a kernel virtual addres (0x7000_0000 to 0x7ffff_ffff) such that a legit kernel mapping already exists, that process hangs instead of being killed with SIGSEGV Fix that by ensuring that do_page_fault() handles kenrel vaddr only if in kernel mode. And given this, we can also simplify the code a bit. Now a vmalloc fault implies kernel mode so its failure (for some reason) can reuse the @no_context label and we can remove @bad_area_nosemaphore. Reproduce user test for original problem: ------------------------>8----------------- #include <stdlib.h> #include <stdint.h> int main(int argc, char *argv[]) { volatile uint32_t temp; temp = *(uint32_t *)(0x70000000); } ------------------------>8----------------- Cc: <stable@vger.kernel.org> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit 121e38e5 ] Commit 15773ae9 ("signal/arc: Use force_sig_fault where appropriate") introduced undefined behaviour by leaving si_code unitiailized and leaking random kernel values to user space. Fixes: 15773ae9 ("signal/arc: Use force_sig_fault where appropriate") Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 15773ae9 ] Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Milan Broz authored
[ Upstream commit 7a1cd723 ] The information about tag size should not be printed without debug info set. Also print device major:minor in the error message to identify the device instance. Also use rate limiting and debug level for info about used crypto API implementaton. This is important because during online reencryption the existing message saturates syslog (because we are moving hotzone across the whole device). Cc: stable@vger.kernel.org Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Long Li authored
[ Upstream commit 4739f232 ] To support compounding, __smb_send_rqst() now sends an array of requests to the transport layer. Change smbd_send() to take an array of requests, and send them in as few packets as possible. Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit e6fdd3bf ] Use devm_pci_alloc_host_bridge() to simplify the error code path. This also fixes a leak in the dw_pcie_host_init() error path. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> CC: stable@vger.kernel.org # v4.13+ Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 765c5967 ] Add PCI Ids for Intel CML. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ming Lei authored
[ Upstream commit c7e2d94b ] Once blk_cleanup_queue() returns, tags shouldn't be used any more, because blk_mq_free_tag_set() may be called. Commit 45a9c9d9 ("blk-mq: Fix a use-after-free") fixes this issue exactly. However, that commit introduces another issue. Before 45a9c9d9, we are allowed to run queue during cleaning up queue if the queue's kobj refcount is held. After that commit, queue can't be run during queue cleaning up, otherwise oops can be triggered easily because some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue(). We have invented ways for addressing this kind of issue before, such as: 8dc765d4 ("SCSI: fix queue cleanup race before queue initialization is done") c2856ae2 ("blk-mq: quiesce queue before freeing queue") But still can't cover all cases, recently James reports another such kind of issue: https://marc.info/?l=linux-scsi&m=155389088124782&w=2 This issue can be quite hard to address by previous way, given scsi_run_queue() may run requeues for other LUNs. Fixes the above issue by freeing hctx's resources in its release handler, and this way is safe becasue tags isn't needed for freeing such hctx resource. This approach follows typical design pattern wrt. kobject's release handler. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reported-by:
James Smart <james.smart@broadcom.com> Fixes: 45a9c9d9 ("blk-mq: Fix a use-after-free") Cc: stable@vger.kernel.org Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 5de719e3 ] After commit 396eaf21 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback"), map_request() will requeue the tio when issued clone request return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. Thus, if device driver status is error, a tio may be requeued multiple times until the return value is not DM_MAPIO_REQUEUE. That means type->start_io may be called multiple times, while type->end_io is only called when IO complete. In fact, even without commit 396eaf21, setup_clone() failure can also cause tio requeue and associated missed call to type->end_io. The service-time path selector selects path based on in_flight_size, which is increased by st_start_io() and decreased by st_end_io(). Missed calls to st_end_io() can lead to in_flight_size count error and will cause the selector to make the wrong choice. In addition, queue-length path selector will also be affected. To fix the problem, call type->end_io in ->release_clone_rq before tio requeue. map_info is passed to ->release_clone_rq() for map_request() error path that result in requeue. Fixes: 396eaf21 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Cc: stable@vger.kernl.org Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
-
Lyude Paul authored
[ Upstream commit e0547c81 ] On ThinkPad P50 SKUs with an Nvidia Quadro M1000M instead of the M2000M variant, the BIOS does not always reset the secondary Nvidia GPU during reboot if the laptop is configured in Hybrid Graphics mode. The reason is unknown, but the following steps and possibly a good bit of patience will reproduce the issue: 1. Boot up the laptop normally in Hybrid Graphics mode 2. Make sure nouveau is loaded and that the GPU is awake 3. Allow the Nvidia GPU to runtime suspend itself after being idle 4. Reboot the machine, the more sudden the better (e.g. sysrq-b may help) 5. If nouveau loads up properly, reboot the machine again and go back to step 2 until you reproduce the issue This results in some very strange behavior: the GPU will be left in exactly the same state it was in when the previously booted kernel started the reboot. This has all sorts of bad side effects: for starters, this completely breaks nouveau starting with a mysterious EVO channel failure that happens well before we've actually used the EVO channel for anything: nouveau 0000:01:00.0: disp: chid 0 mthd 0000 data 00000400 00001000 00000002 This causes a timeout trying to bring up the GR ctx: nouveau 0000:01:00.0: timeout WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf100.c:1547 gf100_grctx_generate+0x7b2/0x850 [nouveau] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET82W (1.55 ) 12/18/2018 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] ... nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at 0000000000008000 engine 00 [GR] client 15 [HUB/SCC_NB] reason c4 [] on channel -1 [0000000000 unknown] The GPU never manages to recover. Booting without loading nouveau causes issues as well, since the GPU starts sending spurious interrupts that cause other device's IRQs to get disabled by the kernel: irq 16: nobody cared (try booting with the "irqpoll" option) ... handlers: [<000000007faa9e99>] i801_isr [i2c_i801] Disabling IRQ #16 ... serio: RMI4 PS/2 pass-through port at rmi4-00.fn03 i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-110). i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! This causes the touchpad and sometimes other things to get disabled. Since this happens without nouveau, we can't fix this problem from nouveau itself. Add a PCI quirk for the specific P50 variant of this GPU. Make sure the GPU is advertising NoReset- so we don't reset the GPU when the machine is in Dedicated graphics mode (where the GPU being initialized by the BIOS is normal and expected). Map the GPU MMIO space and read the magic 0x2240c register, which will have bit 1 set if the device was POSTed during a previous boot. Once we've confirmed all of this, reset the GPU and re-disable it - bringing it back to a healthy state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203003 Link: https://lore.kernel.org/lkml/20190212220230.1568-1-lyude@redhat.comSigned-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit 01d5d7fa ] Add SWITCHTEC_QUIRK() to reduce redundancy in declaring devices that use quirk_switchtec_ntb_dma_alias(). By itself, this is no functional change, but a subsequent patch updates SWITCHTEC_QUIRK() to fix ad281ecf ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB"). Fixes: ad281ecf ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> [bhelgaas: split to separate patch] Signed-off-by:
-
Christoph Muellner authored
[ Upstream commit 28f22fb7 ] Add disable-cqe-dcmd as optional property for MMC hosts. This property allows to disable or not enable the direct command features of the command queue engine. Signed-off-by:
Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by:
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixes: 84362d79 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org Signed-off-by:
-
Sowjanya Komatineni authored
[ Upstream commit c7fddbd5 ] Add supports-cqe optional property for MMC hosts. This property is used to identify the specific host controller supporting command queue. Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Christian Lamparter authored
[ Upstream commit f3e35357 ] David Bauer reported that the VDSL modem (attached via PCIe) on his AVM Fritz!Box 7530 was complaining about not having enough space in the BAR. A closer inspection of the old qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed: | qcom,pcie@80000 { | compatible = "qcom,msm_pcie"; | reg = <0x80000 0x2000>, | <0x99000 0x800>, | <0x40000000 0xf1d>, | <0x40000f20 0xa8>, | <0x40100000 0x1000>, | <0x40200000 0x100000>, | <0x40300000 0xd00000>; | reg-names = "parf", "phy", "dm_core", "elbi", | "conf", "io", "bars"; Matching the reg-names with the listed reg leads to <0xd00000> as the size for the "bars". Cc: stable@vger.kernel.org BugLink: https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg45212.htmlReported-by:
David Bauer <mail@david-bauer.net> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Andy Gross <agross@kernel.org> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 97131f85 ] The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level triggered interrupt. The msi_ctrl_int will be high for as long as any MSI status bit is set, thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the IRQ handler to keep getting called, as long as any MSI status bit is set. A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has configured this IRQ incorrectly. Not having the correct IRQ type defined will cause us to lose interrupts, which in turn causes timeouts in the PCIe endpoint drivers. Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Mathias Kresin authored
[ Upstream commit da89f500 ] The PCI range is invalid and PCI attached devices doen't work. Signed-off-by:
Mathias Kresin <dev@kresin.me> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit 345c0dbf ] Add the blocks which belong to the journal inode to block_validity's system zone so attempts to deallocate or overwrite the journal due a corrupted file system where the journal blocks are also claimed by another inode. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202879Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Koen Vandeputte authored
[ Upstream commit 5f2efda7 ] Building tda1997x fails now unless V4L2_FWNODE is selected: drivers/media/i2c/tda1997x.o: in function `tda1997x_parse_dt' undefined reference to `v4l2_fwnode_endpoint_parse' While at it, also sort the selections alphabetically Fixes: 9ac0038d ("media: i2c: Add TDA1997x HDMI receiver driver") Signed-off-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: stable@vger.kernel.org # v4.17+ Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
ZhangXiaoxu authored
[ Upstream commit b57a55e2 ] There is a KASAN slab-out-of-bounds: BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0 Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539 CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0xdd/0x12a print_address_description+0xa7/0x540 kasan_report+0x1ff/0x550 check_memory_region+0x2f1/0x310 memcpy+0x2f/0x80 _copy_from_iter_full+0x783/0xaa0 tcp_sendmsg_locked+0x1840/0x4140 tcp_sendmsg+0x37/0x60 inet_sendmsg+0x18c/0x490 sock_sendmsg+0xae/0x130 smb_send_kvec+0x29c/0x520 __smb_send_rqst+0x3ef/0xc60 smb_send_rqst+0x25a/0x2e0 compound_send_recv+0x9e8/0x2af0 cifs_send_recv+0x24/0x30 SMB2_open+0x35e/0x1620 open_shroot+0x27b/0x490 smb2_open_op_close+0x4e1/0x590 smb2_query_path_info+0x2ac/0x650 cifs_get_inode_info+0x1058/0x28f0 cifs_root_iget+0x3bb/0xf80 cifs_smb3_do_mount+0xe00/0x14c0 cifs_do_mount+0x15/0x20 mount_fs+0x5e/0x290 vfs_kern_mount+0x88/0x460 do_mount+0x398/0x31e0 ksys_mount+0xc6/0x150 __x64_sys_mount+0xea/0x190 do_syscall_64+0x122/0x590 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It can be reproduced by the following step: 1. samba configured with: server max protocol = SMB2_10 2. mount -o vers=default When parse the mount version parameter, the 'ops' and 'vals' was setted to smb30, if negotiate result is smb21, just update the 'ops' to smb21, but the 'vals' is still smb30. When add lease context, the iov_base is allocated with smb21 ops, but the iov_len is initiallited with the smb30. Because the iov_len is longer than iov_base, when send the message, copy array out of bounds. we need to keep the 'ops' and 'vals' consistent. Fixes: 9764c02f ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)") Fixes: d5c7076b ("smb3: add smb3.1.1 to default dialect list") Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Sean Christopherson authored
[ Upstream commit b68f3cc7 ] Invoking the 64-bit variation on a 32-bit kenrel will crash the guest, trigger a WARN, and/or lead to a buffer overrun in the host, e.g. rsm_load_state_64() writes r8-r15 unconditionally, but enum kvm_reg and thus x86_emulate_ctxt._regs only define r8-r15 for CONFIG_X86_64. KVM allows userspace to report long mode support via CPUID, even though the guest is all but guaranteed to crash if it actually tries to enable long mode. But, a pure 32-bit guest that is ignorant of long mode will happily plod along. SMM complicates things as 64-bit CPUs use a different SMRAM save state area. KVM handles this correctly for 64-bit kernels, e.g. uses the legacy save state map if userspace has hid long mode from the guest, but doesn't fare well when userspace reports long mode support on a 32-bit host kernel (32-bit KVM doesn't support 64-bit guests). Since the alternative is to crash the guest, e.g. by not loading state or explicitly requesting shutdown, unconditionally use the legacy SMRAM save state map for 32-bit KVM. If a guest has managed to get far enough to handle SMIs when running under a weird/buggy userspace hypervisor, then don't deliberately crash the guest since there are no downsides (from KVM's perspective) to allow it to continue running. Fixes: 660a5d51 ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
WANG Chao authored
[ Upstream commit 1811d979 ] guest xcr0 could leak into host when MCE happens in guest mode. Because do_machine_check() could schedule out at a few places. For example: kvm_load_guest_xcr0 ... kvm_x86_ops->run(vcpu) { vmx_vcpu_run vmx_complete_atomic_exit kvm_machine_check do_machine_check do_memory_failure memory_failure lock_page In this case, host_xcr0 is 0x2ff, guest vcpu xcr0 is 0xff. After schedule out, host cpu has guest xcr0 loaded (0xff). In __switch_to { switch_fpu_finish copy_kernel_to_fpregs XRSTORS If any bit i in XSTATE_BV[i] == 1 and xcr0[i] == 0, XRSTORS will generate #GP (In this case, bit 9). Then ex_handler_fprestore kicks in and tries to reinitialize fpu by restoring init fpu state. Same story as last #GP, except we get DOUBLE FAULT this time. Cc: stable@vger.kernel.org Signed-off-by:
WANG Chao <chao.wang@ucloud.cn> Signed-off-by:
-
Ben Gardon authored
[ Upstream commit bc8a3d89 ] KVM bases its memory usage limits on the total number of guest pages across all memslots. However, those limits, and the calculations to produce them, use 32 bit unsigned integers. This can result in overflow if a VM has more guest pages that can be represented by a u32. As a result of this overflow, KVM can use a low limit on the number of MMU pages it will allocate. This makes KVM unable to map all of guest memory at once, prompting spurious faults. Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch introduced no new failures. Signed-off-by:
Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Moni Shoua authored
[ Upstream commit 1abe186e ] If page-fault handler spans multiple MRs then the access mask needs to be reset before each MR handling or otherwise write access will be granted to mapped pages instead of read-only. Cc: <stable@vger.kernel.org> # 3.19 Fixes: 7bdf65d4 ("IB/mlx5: Handle page faults") Reported-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dinh Nguyen authored
[ Upstream commit 8efd6365 ] The gmac ethernet driver uses the "altr,sysmgr-syscon" property to configure phy settings for the gmac controller. Add the "altr,sysmgr-syscon" property to all gmac nodes. This patch fixes: [ 0.917530] socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found [ 0.924209] socfpga-dwmac ff800000.ethernet: Unable to parse OF data Cc: stable@vger.kernel.org Reported-by:
Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 976daf9d ] PD 2.0 sinks are supposed to accept src-capabilities with a 3.0 header and simply ignore any src PDOs which the sink does not understand such as PPS but some 2.0 sinks instead ignore the entire PD_DATA_SOURCE_CAP message, causing contract negotiation to fail. This commit fixes such sinks not working by re-trying the contract negotiation with PD-2.0 source-caps messages if we don't have a contract after PD_N_HARD_RESET_COUNT hard-reset attempts. The problem fixed by this commit was noticed with a Type-C to VGA dongle. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
