- 15 Aug, 2012 5 commits
-
-
Albert Wang authored
In JPEG mode, the size of image is variable due to different JPEG compression rate. We only can get the pix->sizeimage from the user. If we clear pix->sizeimage in soc_camera_try_fmt() then we will get it from: ret = soc_mbus_image_size(xlate->host_fmt, pix->bytesperline, pix->height); if (ret < 0) return ret; pix->sizeimage = max_t(u32, pix->sizeimage, ret); In general, this sizeimage will be larger than the actul JPEG image size. But vb2 will check the buffer and size of image in __qbuf_userptr(): /* Check if the provided plane buffer is large enough */ if (planes[plane].length < q->plane_sizes[plane]) So we shouldn't clear the pix->sizeimage and also shouldn't re-calculate the pix->sizeimage in soc_mbus_image_size() in JPEG mode We also shouldn't re-calculate pix->bytesperline: ret = soc_mbus_bytes_per_line(pix->width, xlate->host_fmt); if (ret < 0) return ret; pix->bytesperline = max_t(u32, pix->bytesperline, ret); pix->bytesperline also should be set by the user or by the driver's try_fmt() implementation. Change-Id: I700690a2287346127a624b5260922eaa5427a596 Signed-off-by:
Albert Wang <twang13@marvell.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Javier Martin authored
On i.MX27 two clocks are required: emma-ipg and emma-ahb. The ahb clock has to be requested using both a device and a connection ID. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> [g.liakhovetski@gmx.de: rebase to the current media tree] Signed-off-by:
-
Fabio Estevam authored
Prepare the clock before enabling it. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: <linux-media@vger.kernel.org> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
Prepare the clock before enabling it. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: <linux-media@vger.kernel.org> Signed-off-by:
-
Alex Gershgorin authored
This patch checks the state of the buffer when calling .buf_init() method. This is needed for the USERPTR buffer type, because in that case .buf_init() is called every time a buffer is queued, and not only once during the preparation stage, like in the MMAP case. Without this check buffers get initialised repeatedly, which also leads to the allocation of new DMA descriptors, of which there is only a final relatively small number available. Both MMAP and USERPTR methods were successfully tested. Signed-off-by:
Alex Gershgorin <alexg@meprolight.com> [g.liakhovetski@gmx.de: remove mx3_camera_buffer::state completely] Signed-off-by:
-
- 12 Aug, 2012 8 commits
-
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
This removes the need for shark_led_work to take the v4l2 lock. Signed-off-by:
-
Hans de Goede authored
Recent kernels properly clear the usb intfdata pointer when another driver fails to bind (in the radio-shark* case the usbhid driver would try to bind first. Signed-off-by:
-
Guenter Roeck authored
This patch fixes the error drivers/usb/core/hub.c:3753: undefined reference to `usb_speed_string' seen in various random configurations. Cc: Sean Young <sean@mess.org> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Hans Verkuil authored
struct v4l2_hw_freq_seek has two new fields that weren't printed in the logging function. Added. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
When VIDIOC_ENUM_FREQ_BANDS is called for a driver that doesn't supply an enum_freq_bands op, then it will fall back to reporting a single freq band based on information from g_tuner or g_modulator. Due to a bug this is an infinite list since the index field wasn't tested. This patch fixes this and returns -EINVAL if index != 0. Signed-off-by:
-
Hans Verkuil authored
Trival but important patch. Signed-off-by:
-
- 11 Aug, 2012 3 commits
-
-
Hans Verkuil authored
Just a few fixes for problems found after updating v4l2-compliance to check the frequency band enumeration. Note that the i2c driver doesn't fill in bus_info, but since I can't test that driver I've decided not to fix that. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Jayakrishnan Memana authored
Buffers marked as erroneous are recycled immediately by the driver if the nodrop module parameter isn't set. The buffer payload size is reset to 0, but the buffer bytesused field isn't. This results in the buffer being immediately considered as complete, leading to an infinite loop in interrupt context. Fix the problem by resetting the bytesused field when recycling the buffer. Cc: <stable@vger.kernel.org> Signed-off-by:
Jayakrishnan Memana <jayakrishnan.memana@maxim-ic.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 01 Aug, 2012 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull second set of media updates from Mauro Carvalho Chehab: - radio API: add support to work with radio frequency bands - new AM/FM radio drivers: radio-shark, radio-shark2 - new Remote Controller USB driver: iguanair - conversion of several drivers to the v4l2 core control framework - new board additions at existing drivers - the remaining (and vast majority of the patches) are due to drivers/DocBook fixes/cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (154 commits) [media] radio-tea5777: use library for 64bits div [media] tlg2300: Declare MODULE_FIRMWARE usage [media] lgs8gxx: Declare MODULE_FIRMWARE usage [media] xc5000: Add MODULE_FIRMWARE statements [media] s2255drv: Add MODULE_FIRMWARE statement [media] dib8000: move dereference after check for NULL [media] Documentation: Update cardlists [media] bttv: add support for Aposonic W-DVR [media] cx25821: Remove bad strcpy to read-only char* [media] pms.c: remove duplicated include [media] smiapp-core.c: remove duplicated include [media] via-camera: pass correct format settings to sensor [media] rtl2832.c: minor cleanup [media] Add support for the IguanaWorks USB IR Transceiver [media] Minor cleanups for MCE USB [media] drivers/media/dvb/siano/smscoreapi.c: use list_for_each_entry [media] Use a named union in struct v4l2_ioctl_info [media] mceusb: Add Twisted Melon USB IDs [media] staging/media/solo6x10: use module_pci_driver macro [media] staging/media/dt3155v4l: use module_pci_driver macro ... Conflicts: Documentation/feature-removal-schedule.txt
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull second wave of NFS client updates from Trond Myklebust: - Patches from Bryan to allow splitting of the NFSv2/v3/v4 code into separate modules. - Fix Oopses in the NFSv4 idmapper - Fix a deadlock whereby rpciod tries to allocate a new socket and ends up recursing into the NFS code due to memory reclaim. - Increase the number of permitted callback connections. * tag 'nfs-for-3.6-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: explicitly reject LOCK_MAND flock() requests nfs: increase number of permitted callback connections. SUNRPC: return negative value in case rpcbind client creation error NFS: Convert v4 into a module NFS: Convert v3 into a module NFS: Convert v2 into a module NFS: Keep module parameters in the generic NFS client NFS: Split out remaining NFS v4 inode functions NFS: Pass super operations and xattr handlers in the nfs_subversion NFS: Only initialize the ACL client in the v3 case NFS: Create a try_mount rpc op NFS: Remove the NFS v4 xdev mount function NFS: Add version registering framework NFS: Fix a number of bugs in the idmapper nfs: skip commit in releasepage if we're freeing memory for fs-related reasons sunrpc: clarify comments on rpc_make_runnable pnfsblock: bail out partial page IO
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking update from David S. Miller: "I think Eric Dumazet and I have dealt with all of the known routing cache removal fallout. Some other minor fixes all around. 1) Fix RCU of cached routes, particular of output routes which require liberation via call_rcu() instead of call_rcu_bh(). From Eric Dumazet. 2) Make sure we purge net device references in cached routes properly. 3) TG3 driver bug fixes from Michael Chan. 4) Fix reported 'expires' value in ipv6 routes, from Li Wei. 5) TUN driver ioctl leaks kernel bytes to userspace, from Mathias Krause." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) ipv4: Properly purge netdev references on uncached routes. ipv4: Cache routes in nexthop exception entries. ipv4: percpu nh_rth_output cache ipv4: Restore old dst_free() behavior. bridge: make port attributes const ipv4: remove rt_cache_rebuild_count net: ipv4: fix RCU races on dst refcounts net: TCP early demux cleanup tun: Fix formatting. net/tun: fix ioctl() based info leaks tg3: Update version to 3.124 tg3: Fix race condition in tg3_get_stats64() tg3: Add New 5719 Read DMA workaround tg3: Fix Read DMA workaround for 5719 A0. tg3: Request APE_LOCK_PHY before PHY access ipv6: fix incorrect route 'expires' value passed to userspace mISDN: Bugfix only few bytes are transfered on a connection seeq: use PTR_RET at init_module of driver bnx2x: remove cast around the kmalloc in bnx2x_prev_mark_path ipv4: clean up put_child ... -
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull battery updates from Anton Vorontsov: "The tag contains just a few battery-related changes for v3.6. It's is all pretty straightforward, except one thing. One of our patches added thermal support for power supply class, but thermal/ subsystem changed under our feet. We (well, Stephen, that is) caught the issue and it was decided[1] that I'd just delay the battery pull request, and then will fix it up by merging upstream back into battery tree at the specific commit. That's not all though: another[2] small fixup for thermal subsystem was needed to get rid of a warning in power supply subsystem (the warning was not drivers/power's "fault", the thermal registration function just needed a proper const annotation, which is also done by a small commit on top of the merge. So, to sum this up: - The 'master' branch of the battery tree was in the -next tree for weeks, was never rebased, altered etc. It should be all OK; - Although, for-v3.6 tag contains the 'master' branch + merge + the warning fix. [1] http://lkml.org/lkml/2012/6/19/23 [2] http://lkml.org/lkml/2012/6/18/28" * tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits) thermal: Constify 'type' argument for the registration routine olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries olpc-battery: Add VOLTAGE_MAX_DESIGN property charger-manager: Fix build break related to EXTCON lp8727_charger: Move header file into platform_data directory power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT bq27x00_battery: Add support for BQ27425 chip charger-manager: Set current limit of regulator for over current protection charger-manager: Use EXTCON Subsystem to detect charger cables for charging test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties test_power: Add support for USB AC source gpio-charger: Use cansleep version of gpio_set_value bq27x00_battery: Add support for power average and health properties sbs-battery: Don't trigger false supply_changed event twl4030_charger: Allow charger to control the regulator that feeds it twl4030_charger: Add backup-battery charging twl4030_charger: Fix some typos max17042_battery: Support CHARGE_COUNTER power supply attribute smb347-charger: Add constant charge and current properties power_supply: Add constant charge_current and charge_voltage properties ...
-
- 31 Jul, 2012 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar: "The biggest changes are Intel Nehalem-EX PMU uncore support, uprobes updates/cleanups/fixes from Oleg and diverse tooling updates (mostly fixes) now that Arnaldo is back from vacation." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) uprobes: __replace_page() needs munlock_vma_page() uprobes: Rename vma_address() and make it return "unsigned long" uprobes: Fix register_for_each_vma()->vma_address() check uprobes: Introduce vaddr_to_offset(vma, vaddr) uprobes: Teach build_probe_list() to consider the range uprobes: Remove insert_vm_struct()->uprobe_mmap() uprobes: Remove copy_vma()->uprobe_mmap() uprobes: Fix overflow in vma_address()/find_active_uprobe() uprobes: Suppress uprobe_munmap() from mmput() uprobes: Uprobe_mmap/munmap needs list_for_each_entry_safe() uprobes: Clean up and document write_opcode()->lock_page(old_page) uprobes: Kill write_opcode()->lock_page(new_page) uprobes: __replace_page() should not use page_address_in_vma() uprobes: Don't recheck vma/f_mapping in write_opcode() perf/x86: Fix missing struct before structure name perf/x86: Fix format definition of SNB-EP uncore QPI box perf/x86: Make bitfield unsigned perf/x86: Fix LLC-* and node-* events on Intel SandyBridge perf/x86: Add Intel Nehalem-EX uncore support perf/x86: Fix typo in format definition of uncore PCU filter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc updates from Benjamin Herrenschmidt: "Kumar sent me a handful of Freescale related fixes and I added another regression fix to the pile. PS. I -will- eventually learn about that signed tag business :-)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/kvm/book3s_32: Fix MTMSR_EERI macro powerpc/85xx: p1022ds: fix DIU/LBC switching with NAND enabled powerpc/85xx: p1022ds: disable the NAND flash node if video is enabled powerpc/85xx: Fix sram_offset parameter type powerpc/85xx: P3041DS - change espi input-clock from 40MHz to 35MHz powerpc/85xx: Fix pci base address error for p2020rdb-pc in dts
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "This it the second batch of s390 patches for the 3.6 merge window. Included is enablement for two common code changes, killable page faults and sorted exception tables. And the regular set of cleanup and bug fix patches." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: make use of user_mode() macro where possible s390/mm: rename user_mode variable to addressing_mode s390/mm: fix fault handling for page table walk case s390/mm: make page faults killable s390: update defconfig s390/mm: downgrade page table after fork of a 31 bit process s390/ipl: Use diagnose 8 command separation s390/linker script: use RO_DATA_SECTION s390/exceptions: sort exception table at build time s390/debug: remove module_exit function / move EXPORT_SYMBOLs
-
David S. Miller authored
When a device is unregistered, we have to purge all of the references to it that may exist in the entire system. If a route is uncached, we currently have no way of accomplishing this. So create a global list that is scanned when a network device goes down. This mirrors the logic in net/core/dst.c's dst_ifdown(). Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: -
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd changes from J. Bruce Fields: "This has been an unusually quiet cycle--mostly bugfixes and cleanup. The one large piece is Stanislav's work to containerize the server's grace period--but that in itself is just one more step in a not-yet-complete project to allow fully containerized nfs service. There are a number of outstanding delegation, container, v4 state, and gss patches that aren't quite ready yet; 3.7 may be wilder." * 'nfsd-next' of git://linux-nfs.org/~bfields/linux: (35 commits) NFSd: make boot_time variable per network namespace NFSd: make grace end flag per network namespace Lockd: move grace period management from lockd() to per-net functions LockD: pass actual network namespace to grace period management functions LockD: manage grace list per network namespace SUNRPC: service request network namespace helper introduced NFSd: make nfsd4_manager allocated per network namespace context. LockD: make lockd manager allocated per network namespace LockD: manage grace period per network namespace Lockd: add more debug to host shutdown functions Lockd: host complaining function introduced LockD: manage used host count per networks namespace LockD: manage garbage collection timeout per networks namespace LockD: make garbage collector network namespace aware. LockD: mark host per network namespace on garbage collect nfsd4: fix missing fault_inject.h include locks: move lease-specific code out of locks_delete_lock locks: prevent side-effects of locks_release_private before file_lock is initialized NFSd: set nfsd_serv to NULL after service destruction NFSd: introduce nfsd_destroy() helper ...
-
Eric Dumazet authored
Input path is mostly run under RCU and doesnt touch dst refcnt But output path on forwarding or UDP workloads hits badly dst refcount, and we have lot of false sharing, for example in ipv4_mtu() when reading rt->rt_pmtu Using a percpu cache for nh_rth_output gives a nice performance increase at a small cost. 24 udpflood test on my 24 cpu machine (dummy0 output device) (each process sends 1.000.000 udp frames, 24 processes are started) before : 5.24 s after : 2.06 s For reference, time on linux-3.5 : 6.60 s Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Eric Dumazet authored
commit 404e0a8b (net: ipv4: fix RCU races on dst refcounts) tried to solve a race but added a problem at device/fib dismantle time : We really want to call dst_free() as soon as possible, even if sockets still have dst in their cache. dst_release() calls in free_fib_info_rcu() are not welcomed. Root of the problem was that now we also cache output routes (in nh_rth_output), we must use call_rcu() instead of call_rcu_bh() in rt_free(), because output route lookups are done in process context. Based on feedback and initial patch from David Miller (adding another call_rcu_bh() call in fib, but it appears it was not the right fix) I left the inet_sk_rx_dst_set() helper and added __rcu attributes to nh_rth_output and nh_rth_input to better document what is going on in this code. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph changes from Sage Weil: "Lots of stuff this time around: - lots of cleanup and refactoring in the libceph messenger code, and many hard to hit races and bugs closed as a result. - lots of cleanup and refactoring in the rbd code from Alex Elder, mostly in preparation for the layering functionality that will be coming in 3.7. - some misc rbd cleanups from Josh Durgin that are finally going upstream - support for CRUSH tunables (used by newer clusters to improve the data placement) - some cleanup in our use of d_parent that Al brought up a while back - a random collection of fixes across the tree There is another patch coming that fixes up our ->atomic_open() behavior, but I'm going to hammer on it a bit more before sending it." Fix up conflicts due to commits that were already committed earlier in drivers/block/rbd.c, net/ceph/{messenger.c, osd_client.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (132 commits) rbd: create rbd_refresh_helper() rbd: return obj version in __rbd_refresh_header() rbd: fixes in rbd_header_from_disk() rbd: always pass ops array to rbd_req_sync_op() rbd: pass null version pointer in add_snap() rbd: make rbd_create_rw_ops() return a pointer rbd: have __rbd_add_snap_dev() return a pointer libceph: recheck con state after allocating incoming message libceph: change ceph_con_in_msg_alloc convention to be less weird libceph: avoid dropping con mutex before fault libceph: verify state after retaking con lock after dispatch libceph: revoke mon_client messages on session restart libceph: fix handling of immediate socket connect failure ceph: update MAINTAINERS file libceph: be less chatty about stray replies libceph: clear all flags on con_close libceph: clean up con flags libceph: replace connection state bits with states libceph: drop unnecessary CLOSED check in socket state change callback libceph: close socket directly from ceph_con_close() ... -
Mauro Carvalho Chehab authored
drivers/built-in.o: In function `radio_tea5777_set_freq': radio-tea5777.c:(.text+0x4d8704): undefined reference to `__udivdi3' Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Jeff Layton authored
We have no mechanism to emulate LOCK_MAND locks on NFSv4, so explicitly return -EINVAL if someone requests it. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
NeilBrown authored
By default a sunrpc service is limited to (N+3)*20 connections where N is the number of threads. This is 80 when N==1. If this number is exceeded a warning is printed suggesting that the number of threads be increased. However with services which run a single thread, this is impossible. For such services there is a ->sv_maxconn setting that can be used to forcibly increase the limit, and silence the message. This is used by lockd. The nfs client uses a sunrpc service to handle callbacks and it too is single-threaded, so to avoid the useless messages, and to allow a reasonable number of concurrent connections, we need to set ->sv_maxconn. 1024 seems like a good number. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Anton Vorontsov authored
thermal_zone_device_register() does not modify 'type' argument, so it is safe to declare it as const. Otherwise, if we pass a const string, we are getting the ugly warning: CC drivers/power/power_supply_core.o drivers/power/power_supply_core.c: In function 'psy_register_thermal': drivers/power/power_supply_core.c:204:6: warning: passing argument 1 of 'thermal_zone_device_register' discards 'const' qualifier from pointer target type [enabled by default] include/linux/thermal.h:140:29: note: expected 'char *' but argument is of type 'const char *' Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by:
Jean Delvare <khali@linux-fr.org>
-
Anton Vorontsov authored
This merge is performed to take commit c56f5c03 ("Thermal: Make Thermal trip points writeable") out of Linus' tree and then fixup power supply class. This is needed since thermal stuff added a new argument: CC drivers/power/power_supply_core.o drivers/power/power_supply_core.c: In function ‘psy_register_thermal’: drivers/power/power_supply_core.c:204:6: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default] include/linux/thermal.h:154:29: note: expected ‘int’ but argument is of type ‘struct power_supply *’ drivers/power/power_supply_core.c:204:6: error: too few arguments to function ‘thermal_zone_device_register’ include/linux/thermal.h:154:29: note: declared here make[1]: *** [drivers/power/power_supply_core.o] Error 1 make: *** [drivers/power/] Error 2 Signed-off-by:
-
Alexander Graf authored
Commit b38c77d8 moved the MTMSR_EERI macro from the KVM code to generic ppc_asm.h code. However, while adding it in the headers for the ppc32 case, it missed out to remove the former definition in the KVM code. This patch fixes compilation on server type PPC32 targets with CONFIG_KVM enabled. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Kumar says: "A few patches that missed the initial 3.6 window. These are bug fixes at this point."
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds authored
Pull writeback updates from Wu Fengguang: "Use time based periods to age the writeback proportions, which can adapt equally well to fast/slow devices." Fix up trivial conflict in comment in fs/sync.c * tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Fix some comment errors block: Convert BDI proportion calculations to flexible proportions lib: Fix possible deadlock in flexible proportion code lib: Proportions with flexible period
-
Tim Gardner authored
Cc: Huang Shijie <shijie8@gmail.com> Cc: Kang Yong <kangyong@telegent.com> Cc: Zhang Xiaobing <xbzhang@telegent.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Acked-by:
Huang Shijie <shijie8@gmail.com> Signed-off-by:
-
Tim Gardner authored
Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
Tim Gardner authored
This will make modinfo more useful with regard to discovering necessary firmware files. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Michael Krufky <mkrufky@kernellabs.com> Cc: Eddi De Pieri <eddi@depieri.net> Cc: linux-media@vger.kernel.org Signed-off-by:
-
