- 15 Dec, 2020 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "A bit smaller this time with mostly usual driver updates. Slave support for imx stands out a little" * 'i2c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (30 commits) i2c: remove check that can never be true i2c: Warn when device removing fails dt-bindings: i2c: Update DT binding docs to support SiFive FU740 SoC dt-bindings: i2c: Add compatible string for AM64 SoC i2c: designware: Make register offsets all of the same width i2c: designware: Switch header to use BIT() and GENMASK() i2c: pxa: move to generic GPIO recovery i2c: sh_mobile: Mark adapter suspended during suspend i2c: owl: Add compatible for the Actions Semi S500 I2C controller dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema i2c: imx: support slave mode for imx I2C driver i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL i2c: ocores: Avoid false-positive error log message. Revert "i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630" i2c: mxs: Remove unneeded platform_device_id i2c: pca-platform: drop two members from driver data that are assigned to only i2c: imx: Remove unused .id_table support i2c: nvidia-gpu: drop empty stub for runtime pm dt-bindings: i2c: mellanox,i2c-mlxbf: convert txt to YAML schema i2c: mv64xxx: Add bus error recovery ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi updates from Mark Brown: "The big change this release has been some excellent work from Lukas Wunner which closes a bunch of holes in the cleanup paths for drivers, mainly introduced as a result of devm conversions causing bad interactions with the support SPI has for allocating the bus and driver data together. Together with some of the other work done it feels like we've turned the corner on several long standing pain points with the API. Summary: - Many cleanups around probe/remove and error handling from Lukas Wunner and Uwe Kleine-König, and further fixes around PM from Zhang Qilong. - Provide a mask for which bits of the mode can safely be configured by drivers and use that to fix an issue with the ADS7846 driver. - Documentation of the expected interactions between SPI and GPIO level chip select polarity configuration from H. Nikolaus Schaller, hopefully we're pretty much at the end of sorting out the interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus Walleij for this. - DMA support for Allwinner sun6i controllers. - Support for Canaan K210 Designware implementations and Intel Adler Lake" * tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits) spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors spi: Limit the spi device max speed to controller's max speed spi: spi-geni-qcom: Use the new method of gpio CS control platform/chrome: cros_ec_spi: Drop bits_per_word assignment platform/chrome: cros_ec_spi: Don't overwrite spi::mode spi: dw: Add support for the Canaan K210 SoC SPI spi: dw: Add support for 32-bits max xfer size dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller spi: Update DT binding docs to support SiFive FU740 SoC spi: atmel-quadspi: Fix use-after-free on unbind spi: npcm-fiu: Disable clock in probe error path spi: ar934x: Don't leak SPI master in probe error path spi: mt7621: Don't leak SPI master in probe error path spi: mt7621: Disable clock in probe error path media: netup_unidvb: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: gpio: Don't leak SPI master in probe error path spi: spi-mtk-nor: Don't leak SPI master in probe error path spi: mxic: Don't leak SPI master in probe error path ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates from Mark Brown: "This has been a quiet release for the regulator API, a few new drivers and the usual fixes and cleanup traffic but not much else going on: - Optimisations for the handling of voltage enumeration, especially with sparse selector sets, from Claudiu Beznea. - Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00, Qualcomm PMX55, PM8350 and PM8350c The addition of the SCMI regulator driver (which controls regulators via system firmware) means that we've pulled in the support for the underlying firmware operations from the firmware tree" * tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits) regulator: mc13892-regulator: convert comma to semicolon regulator: pfuze100: Convert the driver to DT-only regulator: max14577: Add proper module aliases strings regulator: da9121: Potential Oops in da9121_assign_chip_model() regulator: da9121: Fix index used for DT property regulator: da9121: Remove uninitialised string variable regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x regulator: qcom-rpmh: Add support for PM8350/PM8350c regulator: dt-bindings: Add PM8350x compatibles regulator: da9121: include linux/gpio/consumer.h regulator: da9121: Mark some symbols with static keyword regulator: da9121: Request IRQ directly and free in release function to avoid masking race regulator: da9121: add interrupt support regulator: da9121: add mode support regulator: da9121: add current support regulator: da9121: Update registration to support multiple buck variants regulator: da9121: Add support for device variants via devicetree regulator: da9121: Add device variant descriptors regulator: da9121: Add device variant regmaps regulator: da9121: Add device variants ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "This is quite a busy release for regmap with two substantial features being added: - Support for register maps Soundwire 1.2 multi-byte operations, allowing atomic support for registers larger than a single byte. - Support for relaxed I/O without barriers in MMIO regmaps, allowing them to be used efficiently on systems where default MMIO operations include barriers. There was also an addition and revert of use of the new Soundwire support for RT715 due to build issues with the driver built in, my tests only covered building it as a module, the patch wasn't just dropped as it had already been merged elsewhere" * tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: ASoC: rt715: Fix build regmap: sdw: add required header files regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event regmap: Fix order of regmap write log regmap: mmio: add config option to allow relaxed MMIO accesses -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ... -
Linus Torvalds authored
Merge more updates from Andrew Morton: "More MM work: a memcg scalability improvememt" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/lru: revise the comments of lru_lock mm/lru: introduce relock_page_lruvec() mm/lru: replace pgdat lru_lock with lruvec lock mm/swap.c: serialize memcg changes in pagevec_lru_move_fn mm/compaction: do page isolation first in compaction mm/lru: introduce TestClearPageLRU() mm/mlock: remove __munlock_isolate_lru_page() mm/mlock: remove lru_lock on TestClearPageMlocked mm/vmscan: remove lruvec reget in move_pages_to_lru mm/lru: move lock into lru_note_cost mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn mm/memcg: add debug checking in lock_page_memcg mm: page_idle_get_page() does not need lru_lock mm/rmap: stop store reordering issue on page->mapping mm/vmscan: remove unnecessary lruvec adding mm/thp: narrow lru locking mm/thp: simplify lru_add_page_tail() mm/thp: use head for head page in lru_add_page_tail() mm/thp: move lru_add_page_tail() to huge_memory.c
-
Hugh Dickins authored
Since we changed the pgdat->lru_lock to lruvec->lru_lock, it's time to fix the incorrect comments in code. Also fixed some zone->lru_lock comment error from ancient time. etc. I struggled to understand the comment above move_pages_to_lru() (surely it never calls page_referenced()), and eventually realized that most of it had got separated from shrink_active_list(): move that comment back. Link: https://lkml.kernel.org/r/1604566549-62481-20-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Jann Horn <jannh@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Duyck authored
Add relock_page_lruvec() to replace repeated same code, no functional change. When testing for relock we can avoid the need for RCU locking if we simply compare the page pgdat and memcg pointers versus those that the lruvec is holding. By doing this we can avoid the extra pointer walks and accesses of the memory cgroup. In addition we can avoid the checks entirely if lruvec is currently NULL. [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/66d8e79d-7ec6-bfbc-1c82-bf32db3ae5b7@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-19-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
-
Alex Shi authored
This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
Hugh Dickins' found a memcg change bug on original version: If we want to change the pgdat->lru_lock to memcg's lruvec lock, we have to serialize mem_cgroup_move_account during pagevec_lru_move_fn. The possible bad scenario would like: cpu 0 cpu 1 lruvec = mem_cgroup_page_lruvec() if (!isolate_lru_page()) mem_cgroup_move_account spin_lock_irqsave(&lruvec->lru_lock <== wrong lock. So we need TestClearPageLRU to block isolate_lru_page(), that serializes the memcg change. and then removing the PageLRU check in move_fn callee as the consequence. __pagevec_lru_add_fn() is different from the others, because the pages it deals with are, by definition, not yet on the lru. TestClearPageLRU is not needed and would not work, so __pagevec_lru_add() goes its own way. Link: https://lkml.kernel.org/r/1604566549-62481-17-git-send-email-alex.shi@linux.alibaba.comReported-by:
-
Alex Shi authored
Currently, compaction would get the lru_lock and then do page isolation which works fine with pgdat->lru_lock, since any page isoltion would compete for the lru_lock. If we want to change to memcg lru_lock, we have to isolate the page before getting lru_lock, thus isoltion would block page's memcg change which relay on page isoltion too. Then we could safely use per memcg lru_lock later. The new page isolation use previous introduced TestClearPageLRU() + pgdat lru locking which will be changed to memcg lru lock later. Hugh Dickins <hughd@google.com> fixed following bugs in this patch's early version: Fix lots of crashes under compaction load: isolate_migratepages_block() must clean up appropriately when rejecting a page, setting PageLRU again if it had been cleared; and a put_page() after get_page_unless_zero() cannot safely be done while holding locked_lruvec - it may turn out to be the final put_page(), which will take an lruvec lock when PageLRU. And move __isolate_lru_page_prepare back after get_page_unless_zero to make trylock_page() safe: trylock_page() is not safe to use at this time: its setting PG_locked can race with the page being freed or allocated ("Bad page"), and can also erase flags being set by one of those "sole owners" of a freshly allocated page who use non-atomic __SetPageFlag(). Link: https://lkml.kernel.org/r/1604566549-62481-16-git-send-email-alex.shi@linux.alibaba.comSuggested-by: -
Alex Shi authored
Currently lru_lock still guards both lru list and page's lru bit, that's ok. but if we want to use specific lruvec lock on the page, we need to pin down the page's lruvec/memcg during locking. Just taking lruvec lock first may be undermined by the page's memcg charge/migration. To fix this problem, we will clear the lru bit out of locking and use it as pin down action to block the page isolation in memcg changing. So now a standard steps of page isolation is following: 1, get_page(); #pin the page avoid to be free 2, TestClearPageLRU(); #block other isolation like memcg change 3, spin_lock on lru_lock; #serialize lru list access 4, delete page from lru list; This patch start with the first part: TestClearPageLRU, which combines PageLRU check and ClearPageLRU into a macro func TestClearPageLRU. This function will be used as page isolation precondition to prevent other isolations some where else. Then there are may !PageLRU page on lru list, need to remove BUG() checking accordingly. There 2 rules for lru bit now: 1, the lru bit still indicate if a page on lru list, just in some temporary moment(isolating), the page may have no lru bit when it's on lru list. but the page still must be on lru list when the lru bit set. 2, have to remove lru bit before delete it from lru list. As Andrew Morton mentioned this change would dirty cacheline for a page which isn't on the LRU. But the loss would be acceptable in Rong Chen <rong.a.chen@intel.com> report: https://lore.kernel.org/lkml/20200304090301.GB5972@shao2-debian/ Link: https://lkml.kernel.org/r/1604566549-62481-15-git-send-email-alex.shi@linux.alibaba.comSuggested-by:
-
Alex Shi authored
__munlock_isolate_lru_page() only has one caller, remove it to clean up and simplify code. Link: https://lkml.kernel.org/r/1604566549-62481-14-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
In the func munlock_vma_page, comments mentained lru_lock needed for serialization with split_huge_pages. But the page must be PageLocked as well as pages in split_huge_page series funcs. Thus the PageLocked is enough to serialize both funcs. Further more, Hugh Dickins pointed: before splitting in split_huge_page_to_list, the page was unmap_page() to remove pmd/ptes which protect the page from munlock. Thus, no needs to guard __split_huge_page_tail for mlock clean, just keep the lru_lock there for isolation purpose. LKP found a preempt issue on __mod_zone_page_state which need change to mod_zone_page_state. Thanks! Link: https://lkml.kernel.org/r/1604566549-62481-13-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
Isolated page shouldn't be recharged by memcg since the memcg migration isn't possible at the time. All pages were isolated from the same lruvec (and isolation inhibits memcg migration). So remove unnecessary regetting. Thanks to Alexander Duyck for pointing this out. Link: https://lkml.kernel.org/r/1604566549-62481-12-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
We have to move lru_lock into lru_note_cost, since it cycle up on memcg tree, for future per lruvec lru_lock replace. It's a bit ugly and may cost a bit more locking, but benefit from multiple memcg locking could cover the lost. Link: https://lkml.kernel.org/r/1604566549-62481-11-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
Fold the PGROTATED event collection into pagevec_move_tail_fn call back func like other funcs does in pagevec_lru_move_fn. Thus we could save func call pagevec_move_tail(). Now all usage of pagevec_lru_move_fn are same and no needs of its 3rd parameter. It's just simply the calling. No functional change. [lkp@intel.com: found a build issue in the original patch, thanks] Link: https://lkml.kernel.org/r/1604566549-62481-10-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
Add a debug checking in lock_page_memcg, then we could get alarm if anything wrong here. Link: https://lkml.kernel.org/r/1604566549-62481-9-git-send-email-alex.shi@linux.alibaba.comSuggested-by:
-
Hugh Dickins authored
It is necessary for page_idle_get_page() to recheck PageLRU() after get_page_unless_zero(), but holding lru_lock around that serves no useful purpose, and adds to lru_lock contention: delete it. See https://lore.kernel.org/lkml/20150504031722.GA2768@blaptop for the discussion that led to lru_lock there; but __page_set_anon_rmap() now uses WRITE_ONCE(), and I see no other risk in page_idle_clear_pte_refs() using rmap_walk() (beyond the risk of racing PageAnon->PageKsm, mostly but not entirely prevented by page_count() check in ksm.c's write_protect_page(): that risk being shared with page_referenced() and not helped by lru_lock). Link: https://lkml.kernel.org/r/1604566549-62481-8-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
"Huang, Ying" <ying.huang@intel.com> Acked-by:
-
Alex Shi authored
Hugh Dickins and Minchan Kim observed a long time issue which discussed here, but actully the mentioned fix in https://lore.kernel.org/lkml/20150504031722.GA2768@blaptop/ was missed. The store reordering may cause problem in the scenario: CPU 0 CPU1 do_anonymous_page page_add_new_anon_rmap() page->mapping = anon_vma + PAGE_MAPPING_ANON lru_cache_add_inactive_or_unevictable() spin_lock(lruvec->lock) SetPageLRU() spin_unlock(lruvec->lock) /* idletacking judged it as LRU * page so pass the page in * page_idle_clear_pte_refs */ page_idle_clear_pte_refs rmap_walk if PageAnon(page) Johannes give detailed examples how the store reordering could cause trouble: "The concern is the SetPageLRU may get reorder before 'page->mapping' setting, That would make CPU 1 will observe at page->mapping after observing PageLRU set on the page. 1. anon_vma + PAGE_MAPPING_ANON That's the in-order scenario and is fine. 2. NULL That's possible if the page->mapping store gets reordered to occur after SetPageLRU. That's fine too because we check for it. 3. anon_vma without the PAGE_MAPPING_ANON bit That would be a problem and could lead to all kinds of undesirable behavior including crashes and data corruption. Is it possible? AFAICT the compiler is allowed to tear the store to page->mapping and I don't see anything that would prevent it. That said, I also don't see how the reader testing PageLRU under the lru_lock would prevent that in the first place. AFAICT we need that WRITE_ONCE() around the page->mapping assignment." [alex.shi@linux.alibaba.com: updated for comments change from Johannes] Link: https://lkml.kernel.org/r/e66ef2e5-c74c-6498-e8b3-56c37b9d2d15@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-7-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
We don't have to add a freeable page into lru and then remove from it. This change saves a couple of actions and makes the moving more clear. The SetPageLRU needs to be kept before put_page_testzero for list integrity, otherwise: #0 move_pages_to_lru #1 release_pages if !put_page_testzero if (put_page_testzero()) !PageLRU //skip lru_lock SetPageLRU() list_add(&page->lru,) list_add(&page->lru,) [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/1604566549-62481-6-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: -
Alex Shi authored
lru_lock and page cache xa_lock have no obvious reason to be taken one way round or the other: until now, lru_lock has been taken before page cache xa_lock, when splitting a THP; but nothing else takes them together. Reverse that ordering: let's narrow the lru locking - but leave local_irq_disable to block interrupts throughout, like before. Hugh Dickins point: split_huge_page_to_list() was already silly, to be using the _irqsave variant: it's just been taking sleeping locks, so would already be broken if entered with interrupts enabled. So we can save passing flags argument down to __split_huge_page(). Why change the lock ordering here? That was hard to decide. One reason: when this series reaches per-memcg lru locking, it relies on the THP's memcg to be stable when taking the lru_lock: that is now done after the THP's refcount has been frozen, which ensures page memcg cannot change. Another reason: previously, lock_page_memcg()'s move_lock was presumed to nest inside lru_lock; but now lru_lock must nest inside (page cache lock inside) move_lock, so it becomes possible to use lock_page_memcg() to stabilize page memcg before taking its lru_lock. That is not the mechanism used in this series, but it is an option we want to keep open. [hughd@google.com: rewrite commit log] Link: https://lkml.kernel.org/r/1604566549-62481-5-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
-
Alex Shi authored
Simplify lru_add_page_tail(), there are actually only two cases possible: split_huge_page_to_list(), with list supplied and head isolated from lru by its caller; or split_huge_page(), with NULL list and head on lru - because when head is racily isolated from lru, the isolator's reference will stop the split from getting any further than its page_ref_freeze(). So decide between the two cases by "list", but add VM_WARN_ON()s to verify that they match our lru expectations. [Hugh Dickins: rewrite commit log] Link: https://lkml.kernel.org/r/1604566549-62481-4-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
Since the first parameter is only used by head page, it's better to make it explicit. Link: https://lkml.kernel.org/r/1604566549-62481-3-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by:
-
Alex Shi authored
Patch series "per memcg lru lock", v21. This patchset includes 3 parts: 1) some code cleanup and minimum optimization as preparation 2) use TestCleanPageLRU as page isolation's precondition 3) replace per node lru_lock with per memcg per node lru_lock Current lru_lock is one for each of node, pgdat->lru_lock, that guard for lru lists, but now we had moved the lru lists into memcg for long time. Still using per node lru_lock is clearly unscalable, pages on each of memcgs have to compete each others for a whole lru_lock. This patchset try to use per lruvec/memcg lru_lock to repleace per node lru lock to guard lru lists, make it scalable for memcgs and get performance gain. Currently lru_lock still guards both lru list and page's lru bit, that's ok. but if we want to use specific lruvec lock on the page, we need to pin down the page's lruvec/memcg during locking. Just taking lruvec lock first may be undermined by the page's memcg charge/migration. To fix this problem, we could take out the page's lru bit clear and use it as pin down action to block the memcg changes. That's the reason for new atomic func TestClearPageLRU. So now isolating a page need both actions: TestClearPageLRU and hold the lru_lock. The typical usage of this is isolate_migratepages_block() in compaction.c we have to take lru bit before lru lock, that serialized the page isolation in memcg page charge/migration which will change page's lruvec and new lru_lock in it. The above solution suggested by Johannes Weiner, and based on his new memcg charge path, then have this patchset. (Hugh Dickins tested and contributed much code from compaction fix to general code polish, thanks a lot!). Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box on v18, which has no much different with this v20. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Thanks to Hugh Dickins and Konstantin Khlebnikov, they both brought this idea 8 years ago, and others who gave comments as well: Daniel Jordan, Mel Gorman, Shakeel Butt, Matthew Wilcox, Alexander Duyck etc. Thanks for Testing support from Intel 0day and Rong Chen, Fengguang Wu, and Yun Wang. Hugh Dickins also shared his kbuild-swap case. This patch (of 19): lru_add_page_tail() is only used in huge_memory.c, defining it in other file with a CONFIG_TRANSPARENT_HUGEPAGE macro restrict just looks weird. Let's move it THP. And make it static as Hugh Dickins suggested. Link: https://lkml.kernel.org/r/1604566549-62481-1-git-send-email-alex.shi@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-2-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
-
Linus Torvalds authored
Merge tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core updates for 5.11-rc1 This time there was a lot of different work happening here for some reason: - redo of the fwnode link logic, speeding it up greatly - auxiliary bus added (this was a tag that will be pulled in from other trees/maintainers this merge window as well, as driver subsystems started to rely on it) - platform driver core cleanups on the way to fixing some long-time api updates in future releases - minor fixes and tweaks. All have been in linux-next with no (finally) reported issues. Testing there did helped in shaking issues out a lot :)" * tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) driver core: platform: don't oops in platform_shutdown() on unbound devices ACPI: Use fwnode_init() to set up fwnode misc: pvpanic: Replace OF headers by mod_devicetable.h misc: pvpanic: Combine ACPI and platform drivers usb: host: sl811: Switch to use platform_get_mem_or_io() vfio: platform: Switch to use platform_get_mem_or_io() driver core: platform: Introduce platform_get_mem_or_io() dyndbg: fix use before null check soc: fix comment for freeing soc_dev_attr driver core: platform: use bus_type functions driver core: platform: change logic implementing platform_driver_probe driver core: platform: reorder functions driver core: make driver_probe_device() static driver core: Fix a couple of typos driver core: Reorder devices on successful probe driver core: Delete pointless parameter in fwnode_operations.add_links driver core: Refactor fw_devlink feature efi: Update implementation of add_links() to create fwnode links of: property: Update implementation of add_links() to create fwnode links driver core: Use device's fwnode to check if it is waiting for suppliers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial updates from Greg KH: "Here is the "large" set of tty and serial patches for 5.11-rc1. Nothing major at all, some cleanups and some driver removals, always a nice sign: - build warning cleanups - vt locking and logic unwinding and cleanups - tiny serial driver fixes and updates - removal of the synclink serial driver as it's no longer needed - removal of dead termiox code All of this has been in linux-next for a while with no reported issues" * tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits) serial: 8250_pci: Drop bogus __refdata annotation tty: serial: meson: enable console as module serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access serial: imx: Move imx_uart_probe_dt() content into probe() serial: imx: Remove unneeded of_device_get_match_data() NULL check tty: Fix whitespace inconsistencies in vt_io_ioctl serial_core: Check for port state when tty is in error state dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC tty: use const parameters in port-flag accessors tty: use assign_bit() in port-flag accessors earlycon: drop semicolon from earlycon macro tty: Remove dead termiox code tty/serial/imx: Enable TXEN bit in imx_poll_init(). tty : serial: jsm: Fixed file by adding spacing tty: serial: uartlite: Support probe deferral earlycon: simplify earlycon-table implementation tty: serial: bcm63xx: lower driver dependencies serial: mxs-auart: Remove unneeded platform_device_id serial: 8250-mtk: Fix reference leak in mtk8250_probe serial: imx: Remove unused .id_table support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "Lots of changes (slightly more code increase than usual) at this time, while most of code changes are ASoC driver-specific. Here are some highlights: Core: - The new auxiliary bus implementation for Intel DSP, which will be used by other drivers as well - Lots of ASoC core cleanups and refactoring - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others - Compress-offload API enhancement for the pause during draining HD- and USB-audio: - Enhancements of the USB-audio implicit feedback support, including better full-duplex operations - Continued CA0132 improvements and fixes - A few new quirk entries, HDMI audio fixes ASoC: - Support for boot time selection of Intel DSP firmware, which should help distros/users testing new stuff more easily; the kconfig was moved to boot time option, too - Some basic DPCM support in audio graph card - Removal of old pre-DT Freescale drivers - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715, Qualcomm SM8250 and simple GPIO based muxes" * tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits) ALSA: pcm: oss: Fix potential out-of-bounds shift ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: hda/ca0132 - Add ZxR surround DAC setup. ALSA: hda/ca0132 - Add 8051 PLL write helper functions. ALSA: hda/hdmi: packet buffer index must be set before reading value ASoC: SOF: imx: update kernel-doc description ASoC: mediatek: mt8183: delete some unreachable code ASoC: mediatek: mt8183: add PM ops to machine drivers ASoC: topology: Fix wrong size check ASoC: topology: Add missing size check ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err ASoC: SOF: modify the SOF_DBG flags ASoC: SOF: Intel: hda: remove duplicated status dump ASoC: rt1015p: delay 300ms after SDB pulling high for calibration ASoC: rt1015p: move SDB control from trigger to DAPM ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() ALSA: usb-audio: Fix control 'access overflow' errors from chmap ALSA: hda/hdmi: always print pin NIDs as hexadecimal ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ... -
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ... -
Alexey Dobriyan authored
Range checks can folded into proper conversion function. kstrto*() exist for all arithmetic types. Link: https://lkml.kernel.org/r/20201122123759.GC92364@localhost.localdomainSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of just letting the code fall through to the next, and by adding a fallthrough pseudo-keyword in places where the code is intended to fall through. Link: https://github.com/KSPP/linux/issues/115 Link: https://lkml.kernel.org/r/f5756988b8842a3f10008fbc5b0a654f828920a9.1605896059.git.gustavoars@kernel.orgSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Joe Perches authored
Convert the unbounded uses of sprintf to sysfs_emit. A few conversions may now not end in a newline if the output buffer is overflowed. Link: https://lkml.kernel.org/r/0c90a90f466167f8c37de4b737553cf49c4a277f.1605376435.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Joe Perches authored
Update the function to use sysfs_emit_at while neatening the uses of sprintf and overwriting the last space char with a newline to avoid possible output buffer overflow. Miscellanea: - in shmem_enabled_show, the removal of the indirected use of fmt allows __printf verification Link: https://lkml.kernel.org/r/b612a93825e5ea330cb68d2e8b516e9687a06cc6.1605376435.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
The cocci script used in commit bdacbb8d04f ("mm: Use sysfs_emit for struct kobject * uses") does not convert the name##_show macro because the macro uses concatenation via ##. Convert it by hand. Link: https://lkml.kernel.org/r/45ec6cfc177d743f9c0ebaf35e43969dce43af42.1605376435.git.joe@perches.comSigned-off-by: -
Joe Perches authored
Convert the only use of sprintf with struct kobject * that the cocci script could not convert. Miscellanea: - Neaten the uses of a constant string with sysfs_emit to use a const char * to reduce overall object size Link: https://lkml.kernel.org/r/7df6be66bbd68e1a0bca9d35aca1341dbf94d2a7.1605376435.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
Patch series "mm: Convert sysfs sprintf family to sysfs_emit", v2. Use the new sysfs_emit family and not the sprintf family. This patch (of 5): Use the sysfs_emit function instead of the sprintf family. Done with cocci script as in commit 3c6bff3c ("RDMA: Convert sysfs kobject * show functions to use sysfs_emit()") Link: https://lkml.kernel.org/r/cover.1605376435.git.joe@perches.com Link: https://lkml.kernel.org/r/9c249215bad6df616ba0410ad980042694970c1b.1605376435.git.joe@perches.comSigned-off-by:
-
