- 10 Oct, 2018 7 commits
-
-
Paul Mackerras authored
[ Upstream commit 46dec40f ] This fixes a bug which causes guest virtual addresses to get translated to guest real addresses incorrectly when the guest is using the HPT MMU and has more than 256GB of RAM, or more specifically has a HPT larger than 2GB. This has showed up in testing as a failure of the host to emulate doorbell instructions correctly on POWER9 for HPT guests with more than 256GB of RAM. The bug is that the HPTE index in kvmppc_mmu_book3s_64_hv_xlate() is stored as an int, and in forming the HPTE address, the index gets shifted left 4 bits as an int before being signed-extended to 64 bits. The simple fix is to make the variable a long int, matching the return type of kvmppc_hv_find_lock_hpte(), which is what calculates the index. Fixes: 697d3899 ("KVM: PPC: Implement MMIO emulation support for Book3S HV guests") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
[ Upstream commit 48400433 ] Syzbot continues to try to create mac80211_hwsim radios, and manages to pass parameters that are later checked with WARN_ON in cfg80211 - catch another one in hwsim directly. Reported-by: syzbot+2a12f11c306afe871c1f@syzkaller.appspotmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit 77cfaf52 ] The TXQ teardown code can reference the vif data structures that are stored in the netdev private memory area if there are still packets on the queue when it is being freed. Since the TXQ teardown code is run after the netdevs are freed, this can lead to a use-after-free. Fix this by moving the TXQ teardown code to earlier in ieee80211_unregister_hw(). Reported-by:
Ben Greear <greearb@candelatech.com> Tested-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Len Brown authored
commit 46c27978 upstream. Signed-off-by:
Len Brown <len.brown@intel.com> Cc: Alakesh Haloi <alakeshh@amazon.com> Signed-off-by:
-
Jan Kiszka authored
commit e0bf2d49 upstream. Apparently, this driver (or the hardware) does not support character length settings. It's apparently running in 8-bit mode, but it makes userspace believe it's in 5-bit mode. That makes tcsetattr with CS8 incorrectly fail, breaking e.g. getty from busybox, thus the login shell on ttyMVx. Fix by hard-wiring CS8 into c_cflag. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Fixes: 30530791 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <stable@vger.kernel.org> # 4.6+ Signed-off-by:
-
Alex Deucher authored
commit b3fc2ab3 upstream. Needs ATPX rather than _PR3. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=200517Reviewed-by:
Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Colin Ian King authored
commit c4ff91dd upstream. The current use of result is or'ing in values and checking for a non-zero result, however, result is not initialized to zero so it potentially contains garbage to start with. Fix this by initializing it to the first return from the call to vega10_program_didt_config_registers. Detected by cppcheck: "(error) Uninitialized variable: result" Fixes: 9b7b8154 ("drm/amd/powerplay: added didt support for vega10") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Huang Rui <ray.huang@amd.com> [Fix the subject as Colin's comment] Signed-off-by:
-
- 04 Oct, 2018 33 commits
-
-
Greg Kroah-Hartman authored
-
Sakari Ailus authored
commit ad608fbc upstream. The event subscriptions are added to the subscribed event list while holding a spinlock, but that lock is subsequently released while still accessing the subscription object. This makes it possible to unsubscribe the event --- and freeing the subscription object's memory --- while the subscription object is simultaneously accessed. Prevent this by adding a mutex to serialise the event subscription and unsubscription. This also gives a guarantee to the callback ops that the add op has returned before the del op is called. This change also results in making the elems field less special: subscriptions are only added to the event list once they are fully initialised. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for 4.14 and up Fixes: c3b5b024 ("V4L/DVB: V4L: Events: Add backend") Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 2a3f9345 upstream. Not all execution modes are valid for a guest, and some of them depend on what the HW actually supports. Let's verify that what userspace provides is compatible with both the VM settings and the HW capabilities. Cc: <stable@vger.kernel.org> Fixes: 0d854a60 ("arm64: KVM: enable initialization of a 32bit vcpu") Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit ff924c5a ] Fix the section mismatch warning in arch/x86/mm/pti.c: WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte() The function pti_clone_pgtable() references the function __init pti_user_pagetable_walk_pte(). This is often because pti_clone_pgtable lacks a __init annotation or the annotation of pti_user_pagetable_walk_pte is wrong. FATAL: modpost: Section mismatches detected. Fixes: 85900ea5 ("x86/pti: Map the vsyscall page if needed") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.orgSigned-off-by:
-
Mika Westerberg authored
[ Upstream commit 7fd6d98b ] Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion. However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers: Device (SMBU) { ... OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) } Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05) } Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */ } OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } } Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore. Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus. Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737Reported-by:
Yussuf Khalil <dev@pp3345.net> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 755a8bf5 ] If someone has the silly idea to write something along those lines: extern u64 foo(void); void bar(struct arm_smccc_res *res) { arm_smccc_1_1_smc(0xbad, foo(), res); } they are in for a surprise, as this gets compiled as: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d4000003 smc #0x0 5ac: b4000073 cbz x19, 5b8 <bar+0x30> 5b0: a9000660 stp x0, x1, [x19] 5b4: a9010e62 stp x2, x3, [x19, #16] 5b8: f9400bf3 ldr x19, [sp, #16] 5bc: a8c27bfd ldp x29, x30, [sp], #32 5c0: d65f03c0 ret 5c4: d503201f nop The call to foo "overwrites" the x0 register for the return value, and we end up calling the wrong secure service. A solution is to evaluate all the parameters before assigning anything to specific registers, leading to the expected result: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d28175a0 mov x0, #0xbad 5ac: d4000003 smc #0x0 5b0: b4000073 cbz x19, 5bc <bar+0x34> 5b4: a9000660 stp x0, x1, [x19] 5b8: a9010e62 stp x2, x3, [x19, #16] 5bc: f9400bf3 ldr x19, [sp, #16] 5c0: a8c27bfd ldp x29, x30, [sp], #32 5c4: d65f03c0 ret Reported-by:
Julien Grall <julien.grall@arm.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 1d8f5747 ] An unfortunate consequence of having a strong typing for the input values to the SMC call is that it also affects the type of the return values, limiting r0 to 32 bits and r{1,2,3} to whatever was passed as an input. Let's turn everything into "unsigned long", which satisfies the requirements of both architectures, and allows for the full range of return values. Reported-by:
-
Tony Lindgren authored
[ Upstream commit 2d59bb60 ] Otherwise we can get the following errors occasionally on some devices: mmc1: tried to HW reset card, got error -110 mmcblk1: error -110 requesting status mmcblk1: recovery failed! print_req_error: I/O error, dev mmcblk1, sector 14329 ... I have one device that hits this error almost on every boot, and another one that hits it only rarely with the other ones I've used behave without problems. I'm not sure if the issue is related to a particular eMMC card model, but in case it is, both of the machines with issues have: # cat /sys/class/mmc_host/mmc1/mmc1:0001/manfid \ /sys/class/mmc_host/mmc1/mmc1:0001/oemid \ /sys/class/mmc_host/mmc1/mmc1:0001/name 0x000045 0x0100 SEM16G and the working ones have: 0x000011 0x0100 016G92 Note that "ti,non-removable" is different as omap_hsmmc_reg_get() does not call omap_hsmmc_disable_boot_regulators() if no_regulator_off_init is set. And currently we set no_regulator_off_init only for "ti,non-removable" and not for "non-removable". It seems that we should have "non-removable" with some other mmc generic property behave in the same way instead of having to use a non-generic property. But let's fix the issue first. Fixes: 7e2f8c0a ("ARM: dts: Add minimal support for motorola droid 4 xt894") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
James Smart authored
[ Upstream commit afd299ca ] When a targetport is removed from the config, fcloop will avoid calling the LS done() routine thinking the targetport is gone. This leaves the initiator reset/reconnect hanging as it waits for a status on the Create_Association LS for the reconnect. Change the filter in the LS callback path. If tport null (set when failed validation before "sending to remote port"), be sure to call done. This was the main bug. But, continue the logic that only calls done if tport was set but there is no remoteport (e.g. case where remoteport has been removed, thus host doesn't expect a completion). Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 46cb52ad ] The DMA is broken on this specific device for some unknown reason (probably badly designed or plain broken interface electronics) and will only work with PIO. Other users of the same hardware does not have this problem. Add a specific quirk so that this Gemini device gets DMA turned off. Also fix up some code around passing the port information around in probe while we're at it. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Rex Zhu authored
[ Upstream commit 2ab4d0e7 ] For SI/Kv, the power state is managed by function amdgpu_pm_compute_clocks. when dpm enabled, we should call amdgpu_pm_compute_clocks to update current power state instand of set boot state. this change can fix the oops when kfd driver was enabled on Kv. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
[ Upstream commit 8ef23364 ] This is required by gfx hw and can fix the rlc hang when do s3 stree test on Cz/St. Reviewed-by:
Hang Zhou <hang.zhou@amd.com> Signed-off-by:
-
Leonard Crestez authored
[ Upstream commit 538d6e9d ] This reverts commit 1c86c9dd. That commit followed the reference manual but unfortunately the imx7d manual is incorrect. Tested with ath9k pcie card and confirmed internally. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Acked-by:
Lucas Stach <l.stach@pengutronix.de> Fixes: 1c86c9dd ("ARM: dts: imx7d: Invert legacy PCI irq mapping") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f196dec6 ] The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Lothar Felten authored
[ Upstream commit 3ad86700 ] fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by:
Lothar Felten <lothar.felten@gmail.com> Signed-off-by:
-
Srikanth Jampala authored
[ Upstream commit 3d7c8206 ] Earlier used to post the current command without checking queue full after backlog submissions. So, post the current command only after confirming the space in queue after backlog submissions. Maintain host write index instead of reading device registers to get the next free slot to post the command. Return -ENOSPC in queue full case. Signed-off-by:
Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by:
Gadam Sreerama <sgadam@cavium.com> Tested-by:
Jha, Chandan <Chandan.Jha@cavium.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Bo Chen authored
[ Upstream commit ee400a3f ] In 'e1000_set_ringparam()', the tx_ring and rx_ring are updated with new value and the old tx/rx rings are freed only when the device is up. There are resource leaks on old tx/rx rings when the device is not up. This bug is reported by COD, a tool for testing kernel module binaries I am building. This patch fixes the bug by always calling 'kfree()' on old tx/rx rings in 'e1000_set_ringparam()'. Signed-off-by:
Bo Chen <chenbo@pdx.edu> Reviewed-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Bo Chen authored
[ Upstream commit cf1acec0 ] When the device is not up, the call to 'e1000_up()' from the error handling path of 'e1000_set_ringparam()' causes a kernel oops with a null-pointer dereference. The null-pointer dereference is triggered in function 'e1000_alloc_rx_buffers()' at line 'buffer_info = &rx_ring->buffer_info[i]'. This bug was reported by COD, a tool for testing kernel module binaries I am building. This bug was also detected by KFI from Dr. Kai Cong. This patch fixes the bug by checking on 'netif_running()' before calling 'e1000_up()' in 'e1000_set_ringparam()'. Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit b1ccd4c0 ] skb->truesize is not meant to be tracking amount of used bytes in a skb, but amount of reserved/consumed bytes in memory. For instance, if we use a single byte in last page fragment, we have to account the full size of the fragment. So skb_add_rx_frag needs to calculate the length of the entire buffer into turesize. Fixes: 9cbe9fd5 ("net: hns: optimize XGE capability by reducing cpu usage") Signed-off-by:
Huazhong tan <tanhuazhong@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 3ed614dc ] When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE is 65536(64K). But the type of length and page_offset are u16, they will overflow. So change them to u32. Fixes: 6fe6611f ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by:
-
John Fastabend authored
[ Upstream commit 9b2e0388 ] When sockmap code is using the stream parser it also handles the write space events in order to handle the case where (a) verdict redirects skb to another socket and (b) the sockmap then sends the skb but due to memory constraints (or other EAGAIN errors) needs to do a retry. But the initial code missed a third case where the skb_send_sock_locked() triggers an sk_wait_event(). A typically case would be when sndbuf size is exceeded. If this happens because we do not pass the write_space event to the lower layers we never wake up the event and it will wait for sndtimeo. Which as noted in ktls fix may be rather large and look like a hang to the user. To reproduce the best test is to reduce the sndbuf size and send 1B data chunks to stress the memory handling. To fix this pass the event from the upper layer to the lower layer. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 67db7cd2 ] Currently, the lower protocols sk_write_space handler is not called if TLS is sending a scatterlist via tls_push_sg. However, normally tls_push_sg calls do_tcp_sendpage, which may be under memory pressure, that in turn may trigger a wait via sk_wait_event. Typically, this happens when the in-flight bytes exceed the sdnbuf size. In the normal case when enough ACKs are received sk_write_space() will be called and the sk_wait_event will be woken up allowing it to send more data and/or return to the user. But, in the TLS case because the sk_write_space() handler does not wake up the events the above send will wait until the sndtimeo is exceeded. By default this is MAX_SCHEDULE_TIMEOUT so it look like a hang to the user (especially this impatient user). To fix this pass the sk_write_space event to the lower layers sk_write_space event which in the TCP case will wake any pending events. I observed the above while integrating sockmap and ktls. It initially appeared as test_sockmap (modified to use ktls) occasionally hanging. To reliably reproduce this reduce the sndbuf size and stress the tls layer by sending many 1B sends. This results in every byte needing a header and each byte individually being sent to the crypto layer. Signed-off-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Eric Sandeen authored
[ Upstream commit 09a4e0be ] The largest block size supported by isofs is ISOFS_BLOCK_SIZE (2048), but isofs_fill_super calls sb_min_blocksize and sets the blocksize to the device's logical block size if it's larger than what we ended up with after option parsing. If for some reason we try to mount a hard 4k device as an isofs filesystem, we'll set opt.blocksize to 4096, and when we try to read the superblock we found via: block = iso_blknum << (ISOFS_BLOCK_BITS - s->s_blocksize_bits) with s_blocksize_bits greater than ISOFS_BLOCK_BITS, we'll have a negative shift and the bread will fail somewhat cryptically: isofs_fill_super: bread failed, dev=sda, iso_blknum=17, block=-2147483648 It seems best to just catch and clearly reject mounts of such a device. Reported-by:
Bryan Gurney <bgurney@redhat.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 152395fd ] When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Tomer Tayar authored
[ Upstream commit b310974e ] Keep sending mailbox commands to the MFW when it is not responsive ends up with a redundant amount of timeout expiries. This patch prints the MCP status on the first command which is not responded, and blocks the following commands. Since the (un)load request commands might be not responded due to other PFs, the patch also adds the option to skip the blocking upon a failure. Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Tomer Tayar authored
[ Upstream commit eaa50fc5 ] The MFW manages an internal lock to prevent concurrent hardware (de)initialization of different PFs. This, together with the busy-waiting for the MFW's responses for commands, might lead to a deadlock during concurrent load or unload of PFs. This patch adds the option to sleep within the busy-waiting, and uses it for the (un)load requests (which are not sent from an interrupt context) to prevent the possible deadlock. Signed-off-by:
-
Tomer Tayar authored
[ Upstream commit 76271809 ] Successive iterations of halting and resuming the management chip (MCP) might fail, since currently the driver doesn't wait for these operations to actually take place. This patch prevents the driver from moving forward before the operations are reflected in the state register. Signed-off-by:
-
Tomer Tayar authored
[ Upstream commit f00d25f3 ] The MFW might be reset and re-update its shared memory. Upon the detection of such a reset the driver rereads this memory, but it has to wait till the data is valid. This patch adds the missing wait for a data ready indication. Signed-off-by:
-
Dave Martin authored
commit d26c25a9 upstream. We currently allow userspace to access the core register file in about any possible way, including straddling multiple registers and doing unaligned accesses. This is not the expected use of the ABI, and nobody is actually using it that way. Let's tighten it by explicitly checking the size and alignment for each field of the register file. Cc: <stable@vger.kernel.org> Fixes: 2f4a07c5 ("arm64: KVM: guest one-reg interface") Reviewed-by:
-
Uwe Kleine-König authored
commit 7e620984 upstream. Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1 ("serial: imx: drop support for IRDA") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
-
Chris Wilson authored
commit 010e3e68 upstream. Originally we translated from the object to the vma by walking obj->vma_list to find the matching vm (for user lookups). Now we process user lookups using the rbtree, and we only use obj->vma_list itself for maintaining state (e.g. ensuring that all vma are flushed or rebound). As such maintenance needs to go on beyond the user's awareness of the vma, defer removal of the vma from the obj->vma_list from i915_vma_close() to i915_vma_destroy() Fixes: 5888fc9e ("drm/i915: Flush pending GTT writes before unbinding") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104155Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171206124914.19960-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Amir Goldstein authored
commit 764baba8 upstream. Commit 31747eda ("ovl: hash directory inodes for fsnotify") fixed an issue of inotify watch on directory that stops getting events after dropping dentry caches. A similar issue exists for non-dir non-upper files, for example: $ mkdir -p lower upper work merged $ touch lower/foo $ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper none merged $ inotifywait merged/foo & $ echo 2 > /proc/sys/vm/drop_caches $ cat merged/foo inotifywait doesn't get the OPEN event, because ovl_lookup() called from 'cat' allocates a new overlay inode and does not reuse the watched inode. Fix this by hashing non-dir overlay inodes by lower real inode in the following cases that were not hashed before this change: - A non-upper overlay mount - A lower non-hardlink when index=off A helper ovl_hash_bylower() was added to put all the logic and documentation about which real inode an overlay inode is hashed by into one place. The issue dates back to initial version of overlayfs, but this patch depends on ovl_inode code that was introduced in kernel v4.13. Cc: <stable@vger.kernel.org> #v4.13 Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Mark Salyzyn <salyzyn@android.com> #4.14 Signed-off-by:
-
Steve Wise authored
commit 67e38168 upstream. Currently a uverbs completion event queue is flushed of events in ib_uverbs_comp_event_close() with the queue spinlock held and then released. Yet setting ev_queue->is_closed is not set until later in uverbs_hot_unplug_completion_event_file(). In between the time ib_uverbs_comp_event_close() releases the lock and uverbs_hot_unplug_completion_event_file() acquires the lock, a completion event can arrive and be inserted into the event queue by ib_uverbs_comp_handler(). This can cause a "double add" list_add warning or crash depending on the kernel configuration, or a memory leak because the event is never dequeued since the queue is already closed down. So add setting ev_queue->is_closed = 1 to ib_uverbs_comp_event_close(). Cc: stable@vger.kernel.org Fixes: 1e7710f3 ("IB/core: Change completion channel to use the reworked objects schema") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
