This reverts commit b79c6fba, reversing
these changes made to 0ac26271:

  commit 6a0eb6c9 ("dt-bindings: net: qcom,ipa: make imem interconnect
                       optional")
  commit f8bd3c82 ("arm64: dts: qcom: sc7280: add IPA information")
  commit fd0f72c3 ("arm64: dts: qcom: sc7180: define ipa_fw_mem node")

I intend for these commits to go through the Qualcomm repository, to
avoid conflicting with other activity being merged there.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210802233019.800250-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210803105617.338546-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

fib_treeref needs to be set after kzalloc. The old code had a ++ which
led to the confusion when the int was replaced by a refcount_t.

Fixes: 79976892 ("net: convert fib_treeref from int to refcount_t")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210803073739.22339-1-yajun.deng@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Arnd Bergmann says:

====================
drivers/net/Space.c cleanup

I discovered that there are still a couple of drivers that rely on
beiong statically initialized from drivers/net/Space.c the way
we did in the last century. As it turns out, there are a couple
of simplifications that can be made here, as well as some minor
bugfixes.

There are four classes of drivers that use this:

- most 10mbit ISA bus ethernet drivers (and one 100mbit one)
- both ISA localtalk drivers
- several m68k ethernet drivers
- one obsolete WAN driver

I found that the drivers using in arch/m68k/ don't actually benefit
from being probed this way as they do not rely on the netdev= command
line arguments, they have simply never been changed to work like a
modern driver.

I had previously sent a patch to remove the sbni/granch driver, and
there were no objections to this patch but forgot to resend it after
some discussion about another patch in the same series.

For the ISA drivers, there is usually no way to probe multiple devices
at boot time other than the netdev= arguments, so all that logic is left
in place for the moment, but centralized in a single file that only gets
included in the kernel build if one or more of the drivers are built-in.

I'm also changing the old-style init_module() functions in these drivers
to static functions with a module_init() annotation, to more closely
resemble modern drivers. These are the last drivers in the kernel to
still use init_module/cleanup_module, removing those may enable future
cleanups to the module loading process.

       Arnd

Changes in v2:

- replace xsurf100 change with Michael's version
- make it PATCH instead of RFC
- rebase to net-next as of August 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are a couple of ISA ethernet drivers that use the old
init_module/cleanup_module function names for the main entry
points, nothing else uses those any more.

Change them to the documented method with module_init()
and module_exit() markers next to static functions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is one of very few drivers using the old init_module/cleanup_module
function names. Change it over to the modern method.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver was merged in 1999 and has only ever seen treewide cleanups
since then, with no indication whatsoever that anyone has actually
had access to hardware for testing the patches.

>From the information in the link below, it appears that the hardware
is for some leased line system in Russia that has since been
discontinued, and useless without any remote end to connect to.

As the driver still feels like a Linux-2.2 era artifact today, it
appears that the best way forward is to just delete it.

Link: https://www.tms.ru/%D0%90%D0%B4%D0%B0%D0%BF%D1%82%D0%B5%D1%80_%D0%B4%D0%BB%D1%8F_%D0%B2%D1%8B%D0%B4%D0%B5%D0%BB%D0%B5%D0%BD%D0%BD%D1%8B%D1%85_%D0%BB%D0%B8%D0%BD%D0%B8%D0%B9_Granch_SBNI12-10Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dscc4 driver was removed in 2019 but these Kconfig entries remain,
so remove them as well.

Fixes: 28c9eb90 ("net/wan: dscc4: remove broken dscc4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are very few ISA drivers left that rely on the static probing from
drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT
symbol, and drop the entire probe logic when that is disabled.

The 9 drivers that are called from Space.c are the same set that
calls netdev_boot_setup_check().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is now only used by a handful of old ISA drivers,
and can be moved into the file they already all depend on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that ax88796.c exports the ax_NS8390_reinit() symbol, we can
include 8390.h instead of lib8390.c, avoiding duplication of that
function and killing a few compile warnings in the bargain.

Fixes: 861928f4 ("net-next: New ax88796 platform
driver for Amiga X-Surf 100 Zorro board (m68k)")
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The block I/O code for the new X-Surf 100 ax88796 driver needs
ax_NS8390_init() for error fixup in its block_output function.

Export this static function through the ax_NS8390_reinit()
wrapper so we can lose the lib8380.c include in the X-Surf 100
driver.

[arnd: add the declaration in the header to avoid a
 -Wmissing-prototypes warning]
Fixes: 861928f4 ("net-next: New ax88796 platform
driver for Amiga X-Surf 100 Zorro board (m68k)")
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are six m68k specific drivers that use the legacy probe method
in drivers/net/Space.c. However, all of these only support a single
device, and they completely ignore the command line settings from
netdev_boot_setup_check, so there is really no point at all.

Aside from sun3_82586, these already have a module_init function that
can be used for built-in mode as well, simply by removing the #ifdef.

Note that the 82596 driver was previously used on ISA as well, but
that got dropped long ago.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two drivers in the cs89x0 file, with the CONFIG_CS89x0_PLATFORM
symbol deciding which one is getting built. This is somewhat confusing
and makes it more likely ton configure a driver that works nowhere.

Split up the Kconfig option into separate ISA and PLATFORM drivers,
with the ISA symbol explicitly connecting to the static probing in
drivers/net/Space.c

The two drivers are still mutually incompatible at compile time,
which could be lifted by splitting them into multiple files,
but in practice this will make no difference.

The platform driver can now be enabled for compile-testing on
non-ARM machines.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver never uses the information returned by
netdev_boot_setup_check, and is not called by the boot-time probing from
driver/net/Space.c, so just remove these stale references.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver never relies on the netdev_boot_setup_check()
to get its configuration, so it can just as well do its
own probing all the time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The data from the kernel command line is no longer used since the
probe function gets it from the platform device resources instead.

The jazz version was changed to be like this in 2007, the xtensa
version apparently copied the code from there.

Fixes: ed9f0e0b ("remove setup of platform device from jazzsonic.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver has never used the netdev->{irq,base_addr,mem_start}
members, so this call is completely unnecessary.
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
ethtool: runtime-resume netdev parent before ethtool ops

If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if
  not accessing the device) will fail because netif_device_present()
  returns false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing
ethtool ops in kernel.

This patch series covers the typical case that the netdev parent is power-
managed, e.g. a PCI device. Not sure whether cases exist where the netdev
itself is power-managed. If yes then we may need an extension for this.
But the series as-is at least shouldn't cause problems in that case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if not
  accessing the device) will fail because netif_device_present() returns
  false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing the
respective ethtool op in kernel.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If device is runtime-suspended and not accessible then it may be
flagged as not present. If checking whether device is present is
done too early then we may bail out before we have the chance to
runtime-resume the device. Therefore move this check to
ethnl_ops_begin(). This is in preparation of a follow-up patch
that tries to runtime-resume the device before executing ethtool
ops.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation of subsequent extensions to both functions move the
implementations from netlink.h to netlink.c.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if not
  accessing the device) will fail because netif_device_present() returns
  false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing the
respective ethtool op in kernel.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We ended up merging two versions of the same patch set:

commit 8fb7da9e ("virtio_net: get build_skb() buf by data ptr")
commit 5c37711d ("virtio-net: fix for unable to handle page fault for address")

into net, and

commit 7bf64460 ("virtio-net: get build_skb() buf by data ptr")
commit 6c66c147 ("virtio-net: fix for unable to handle page fault for address")

into net-next. Redo the merge from commit 12628565 ("Merge
ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net"), so that
the most recent code remains.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Increase maximum RX ring size when jumbo ring is unused

The RX jumbo ring is automatically enabled when HW GRO/LRO is enabled or
when the MTU exceeds the page size.  The RX jumbo ring provides a lot
more RX buffer space when it is in use.  When the RX jumbo ring is not
in use, some users report that the current maximum of 2K buffers is
too limiting.  This patchset increases the maximum to 8K buffers when
the RX jumbo ring is not used.  The default RX ring size is unchanged
at 511.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current maximum RX ring size is defined assuming the RX jumbo ring
(aka aggregation ring) is used.  The RX jumbo ring is automicatically used
when the MTU exceeds a threshold or when rx-gro-hw/lro is enabled.  The RX
jumbo ring is automatically sized up to 4 times the size of the RX ring
size.

The BNXT_MAX_RX_DESC_CNT constant is the upper limit on the size of the
RX ring whether or not the RX jumbo ring is used.  Obviously, the
maximum amount of RX buffer space is significantly less when the RX jumbo
ring is not used.

To increase flexibility for the user who does not use the RX jumbo ring,
we now define a bigger maximum RX ring size when the RX jumbo ring is not
used.  The maximum RX ring size is now up to 8K when the RX jumbo ring
is not used.  The maximum completion ring size also needs to be scaled
up to accomodate the larger maximum RX ring size.

Note that when the RX jumbo ring is re-enabled, the RX ring size will
automatically drop if it exceeds the maximum.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently store these page addresses and DMA addreses in static
arrays.  On systems with 4K pages, we support up to 64 pages per
completion ring.  The actual number of pages for each completion ring
may be much less than 64.  For example, when the RX ring size is set
to the default 511 entries, only 16 completion ring pages are needed
per ring.

In the next patch, we'll be doubling the maximum number of completion
pages.  So we convert to allocate these arrays as needed instead of
declaring them statically.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Those files under /proc/net/stat/ don't have vertical alignment, it looks
very difficult. Modify the seq_printf statement, keep vertical alignment.

v2:
 - Use seq_puts() and seq_printf() correctly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".

Note, the LACPDU state frames still will be sent when init or unbind port.

v2: remove module parameter
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Duplicate include header file <linux/kernel.h>
line 4: #include <linux/kernel.h>
line 7: #include <linux/kernel.h>
Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy().
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove redundant prints from the iWARP SYN handling.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device recovery flow will reset the entire HW device, in that case
the DORQ HW block attention is redundant.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid calling the qed doorbell recovery - qed_db_rec_handler()
during device recovery.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vasily Averin says:

====================
skbuff: introduce skb_expand_head()

currently if skb does not have enough headroom skb_realloc_headrom is called.
It is not optimal because it creates new skb.

this patch set introduces new helper skb_expand_head()
Unlike skb_realloc_headroom, it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case of failures.

This helps to simplify ip[6]_finish_output2(), ip6_xmit() and few other
functions in vrf, ax25 and bpf.

There are few other cases where this helper can be used
but it requires an additional investigations.

v3 changes:
 - ax25 compilation warning fixed
 - v5.14-rc4 rebase
 - now it does not depend on non-committed pathces

v2 changes:
 - helper's name was changed to skb_expand_head
 - fixed few mistakes inside skb_expand_head():
    skb_set_owner_w should set sk on nskb
    kfree was replaced by kfree_skb()
    improved warning message
 - added minor refactoring in changed functions in vrf and bpf patches
 - removed kfree_skb() in ax25_rt_build_path caller ax25_ip_xmit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.

Additionally this patch replaces commonly used dereferencing with variables.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use skb_expand_head() in ax25_transmit_buffer and ax25_rt_build_path.
Unlike skb_realloc_headroom, new helper does not allocate a new skb if possible.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.

Additionally this patch replaces commonly used dereferencing with variables.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>