Pull EFI fixes from Ard Biesheuvel:

 - handle potential mremap() failure gracefully

 - don't reject EFI memory attributes table version 2

* tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: fix potential NULL deref in efi_mem_reserve_persistent
  efi: Accept version 2 of memory attributes table

Pull RISC-V fixes from Palmer Dabbelt:

 - A build fix to avoid static branches in cpu_relax(), which greatly
   inflates the jump tables and breaks at least
   CONFIG_CC_OPTIMIZE_FOR_SIZE=y.

 - A fix for a kernel panic when probing impossible instruction
   positions.

 - A fix to disable unwind tables, which are enabled by default for
   GCC-13 and result in unhandled relocations in modules.

* tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: disable generation of unwind tables
  riscv: kprobe: Fixup kernel panic when probing an illegal position
  riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y

Pull drm fixes from Dave Airlie:
 "A few more fixes this week, a bit more spread out though.

  We have a bunch of nouveau regression and stabilisation fixes, along
  with usual amdgpu, and i915. Otherwise just some minor misc ones:

  dma-fence:
   - fix signaling bit for private fences

  panel:
   - boe-tv101wum-nl6 disable fix

  nouveau:
   - gm20b acr regression fix
   - tu102 scrub status fix
   - tu102 wait for firmware fix

  i915:
   - Fixes for potential use-after-free and double-free
   - GuC locking and refcount fixes
   - Display's reference clock value fix

  amdgpu:
   - GC11 fixes
   - DCN 3.1.4 fixes
   - NBIO 4.3 fix
   - DCN 3.2 fixes
   - Properly handle additional cases where DCN is not supported
   - SMU13 fixes

  vc4:
   - fix CEC adapter names

  ssd130x:
   - fix display init regression"

* tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  drm/amd/display: Properly handle additional cases where DCN is not supported
  drm/amdgpu: Enable vclk dclk node for gc11.0.3
  drm/amd: Fix initialization for nbio 4.3.0
  drm/amdgpu: enable HDP SD for gfx 11.0.3
  drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11
  drm/amd/display: Reset DMUB mailbox SW state after HW reset
  drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
  drm/amd/display: Adjust downscaling limits for dcn314
  drm/amd/display: Add missing brackets in calculation
  drm/amdgpu: update wave data type to 3 for gfx11
  drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
  drm/nouveau/acr/gm20b: regression fixes
  drm/nouveau/fb/tu102-: fix register used to determine scrub status
  drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
  drm/i915/adlp: Fix typo for reference clock
  drm/i915: Fix potential bit_17 double-free
  drm/i915: Fix up locking around dumping requests lists
  drm/i915: Fix request ref counting during error capture & debugfs dump
  drm/i915/guc: Fix locking when searching for a hung request
  drm/i915: Avoid potential vm use-after-free
  ...

Merge tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "25 hotfixes, mainly for MM.  13 are cc:stable"

* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
  mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
  Kconfig.debug: fix the help description in SCHED_DEBUG
  mm/swapfile: add cond_resched() in get_swap_pages()
  mm: use stack_depot_early_init for kmemleak
  Squashfs: fix handling and sanity checking of xattr_ids count
  sh: define RUNTIME_DISCARD_EXIT
  highmem: round down the address passed to kunmap_flush_on_unmap()
  migrate: hugetlb: check for hugetlb shared PMD in node migration
  mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
  mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
  Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
  freevxfs: Kconfig: fix spelling
  maple_tree: should get pivots boundary by type
  .mailmap: update e-mail address for Eugen Hristev
  mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
  squashfs: harden sanity check in squashfs_read_xattr_id_table
  ia64: fix build error due to switch case label appearing next to declaration
  mm: multi-gen LRU: fix crash during cgroup migration
  Revert "mm: add nodes= arg to memory.reclaim"
  zsmalloc: fix a race with deferred_handles storing
  ...

When iterating on a linked list, a result of memremap is dereferenced
without checking it for NULL.

This patch adds a check that falls back on allocating a new page in
case memremap doesn't succeed.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 18df7577 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
[ardb: return -ENOMEM instead of breaking out of the loop]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Merge tag 'amd-drm-fixes-6.2-2023-02-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-02-01:

amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202042309.24144-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fixes for potential use-after-free and double-free (Rob)
- GuC locking and refcount fixes (John)
- Display's reference clock value fix (Chaitanya)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9u5pHjOYcxzS5Z7@intel.com

A fix for a non-unique CEC adapter name registration in vc4, a
regression breaking the display in ssd130x, a signaling bit issue in
dma-fence, a couple of fixes in nouveau for Turing and Ampere, and a
disable fix for the boe-tv101wum-nl6 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202085724.pz22m7bmei3wyuzp@houat

Pull libata fix from Damien Le Moal:
 "Fix device probe issues with some combination of adapters & devices
  that do not report a current link speed, leading to device probe
  failures if a link speed was not previously reported and saved (me)"

* tag 'ata-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata: Fix sata_down_spd_limit() when no link speed is reported

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and netfilter.

  Current release - regressions:

   - phy: fix null-deref in phy_attach_direct

   - mac802154: fix possible double free upon parsing error

  Previous releases - regressions:

   - bpf: preserve reg parent/live fields when copying range info,
     prevent mis-verification of programs as safe

   - ip6: fix GRE tunnels not generating IPv6 link local addresses

   - phy: dp83822: fix null-deref on DP83825/DP83826 devices

   - sctp: do not check hb_timer.expires when resetting hb_timer

   - eth: mtk_sock: fix SGMII configuration after phylink conversion

  Previous releases - always broken:

   - eth: xdp: execute xdp_do_flush() before napi_complete_done()

   - skb: do not mix page pool and page referenced frags in GRO

   - bpf:
      - fix a possible task gone issue with bpf_send_signal[_thread]()
      - fix an off-by-one bug in bpf_mem_cache_idx() to select the right
        cache
      - add missing btf_put to register_btf_id_dtor_kfuncs
      - sockmap: fon't let sock_map_{close,destroy,unhash} call itself

   - gso: fix null-deref in skb_segment_list()

   - mctp: purge receive queues on sk destruction

   - fix UaF caused by accept on already connected socket in exotic
     socket families

   - tls: don't treat list head as an entry in tls_is_tx_ready()

   - netfilter: br_netfilter: disable sabotage_in hook after first
     suppression

   - wwan: t7xx: fix runtime PM implementation

  Misc:

   - MAINTAINERS: spring cleanup of networking maintainers"

* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
  mtk_sgmii: enable PCS polling to allow SFP work
  net: mediatek: sgmii: fix duplex configuration
  net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
  MAINTAINERS: update SCTP maintainers
  MAINTAINERS: ipv6: retire Hideaki Yoshifuji
  mailmap: add John Crispin's entry
  MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
  net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
  net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
  virtio-net: Keep stop() to follow mirror sequence of open()
  selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
  selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
  selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
  selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
  can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
  can: isotp: split tx timer into transmission and timeout
  can: isotp: handle wait_event_interruptible() return values
  can: raw: fix CAN FD frame transmissions over CAN XL devices
  can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
  hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
  ...

Merge tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "Three fixes to bugs that cause kernel crash, link error during build,
  and a third to fix kunit_test_init_section_suites() extra indirection
  issue"

* tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: fix kunit_test_init_section_suites(...)
  kunit: fix bug in KUNIT_EXPECT_MEMEQ
  kunit: Export kunit_running()

Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of bugfixes is once more for the NXP i.MX platform,
  addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
  imx8dxl power button and the USB modem on an imx7 board.

  The reason that i.MX always shows up here is obviously not that they
  are more buggy than the others, but they have the most boards and are
  good about getting fixes in quickly.

  The other DT fixes are for the Nuvoton wpcm450 flash controller and
  the i2c mux on an ASpeed board.

  Lastly, there are updates to the MAINTAINERS entries for Mediatek,
  AMD/Seattle and NXP SoCs, as well as a lone code fix for error
  handling in the allwinner 'rsb' bus driver"

* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
  MAINTAINERS: Update entry for MediaTek SoC support
  MAINTAINERS: amd: drop inactive Brijesh Singh
  ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
  arm64: dts: imx8mm-verdin: Do not power down eth-phy
  MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
  ARM: dts: aspeed: Fix pca9849 compatible
  arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
  arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
  arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
  bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()

Pull s390 fixes from Heiko Carstens:

 - With CONFIG_VMAP_STACK enabled it is not possible to load the s390
   specific diag288_wdt watchdog module. The reason is that a pointer to
   a string is passed to an inline assembly; this string however is
   located on the stack, while the instruction within the inline
   assembly expects a physicial address. Fix this by copying the string
   to a kmalloc'ed buffer.

 - The diag288_wdt watchdog module does not indicate that it accesses
   memory from an inline assembly, which it does. Add "memory" to the
   clobber list to prevent the compiler from optimizing code incorrectly
   away.

 - Pass size of the uncompressed kernel image to __decompress() call.
   Otherwise the kernel image decompressor may corrupt/overwrite an
   initrd. This was reported to happen on s390 after commit 2aa14b1a
   ("zstd: import usptream v1.5.2").

* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/decompressor: specify __decompress() buf len to avoid overflow
  watchdog: diag288_wdt: fix __diag288() inline assembly
  watchdog: diag288_wdt: do not use stack buffers for hardware data

Merge tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A set of AMD PMF fixes + a few other small fixes"

* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
  platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
  platform/x86/amd: pmc: add CONFIG_SERIO dependency
  platform/x86/amd/pmf: Ensure mutexes are initialized before use
  platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
  platform/x86/amd/pmf: Fix to update SPS default pprof thermals
  platform/x86/amd/pmf: update to auto-mode limits only after AMT event
  platform/x86/amd/pmf: Add helper routine to check pprof is balanced
  platform/x86/amd/pmf: Add helper routine to update SPS thermals

Bjørn Mork says:

====================
Fix mtk_eth_soc sgmii configuration.

This has been tested on a MT7986 with a Maxlinear GPY211C phy
permanently attached to the second SoC mac.
====================

Link: https://lore.kernel.org/r/20230201182331.943411-1-bjorn@mork.noSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently there is no IRQ handling (even the SGMII supports it).
Enable polling to support SFP ports.

Fixes: 14a44ab0 ("net: mtk_eth_soc: partially convert to phylink_pcs")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: changed "1" => "true" ]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The logic of the duplex bit is inverted.  Setting it means half
duplex, not full duplex.

Fix and rename macro to avoid confusion.

Fixes: 7e538372 ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The code expect the PHY to be in power down which is only true after reset.
Allow changes of the SGMII parameters more than once.

Only power down when reconfiguring to avoid bouncing the link when there's
no reason to - based on code from Russell King.

There are cases when the SGMII_PHYA_PWD register contains 0x9 which
prevents SGMII from working. The SGMII still shows link but no traffic
can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
taken from a good working state of the SGMII interface.

Fixes: 42c03844 ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: rebased and squashed into one patch ]
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-6.2-20230202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
can 2023-02-02

The first patch is by Ziyang Xuan and removes a errant WARN_ON_ONCE()
in the CAN J1939 protocol.

The next 3 patches are by Oliver Hartkopp. The first 2 target the CAN
ISO-TP protocol and fix the state machine with respect to signals and
a regression found by the syzbot.

The last patch is by me an missing assignment during the ethtool ring
configuration callback.

* tag 'linux-can-fixes-for-6.2-20230202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
  can: isotp: split tx timer into transmission and timeout
  can: isotp: handle wait_event_interruptible() return values
  can: raw: fix CAN FD frame transmissions over CAN XL devices
  can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
====================

Link: https://lore.kernel.org/r/20230202094135.2293939-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
MAINTAINERS: spring refresh of networking maintainers

Use Jon Corbet's script for generating statistics about maintainer
coverage to identify inactive maintainers of relatively active code.
Move them to CREDITS.
====================

Link: https://lore.kernel.org/r/20230201182014.2362044-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vlad has stepped away from SCTP related duties.
Move him to CREDITS and add Xin Long.

Subsystem SCTP PROTOCOL
  Changes 237 / 629 (37%)
  Last activity: 2022-12-12
  Vlad Yasevich <vyasevich@gmail.com>:
  Neil Horman <nhorman@tuxdriver.com>:
    Author 20a785aa 2020-05-19 00:00:00 4
    Tags 20a785aa 2020-05-19 00:00:00 84
  Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>:
    Author 557fb586 2021-07-28 00:00:00 41
    Tags da05cecc 2022-12-12 00:00:00 197
  Top reviewers:
    [15]: lucien.xin@gmail.com
  INACTIVE MAINTAINER Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We very rarely hear from Hideaki Yoshifuji and the IPv4/IPv6
entry covers a lot of code. Asking people to CC someone who
rarely responds feels wrong.

Note that Hideaki Yoshifuji already has an entry in CREDITS
for IPv6 so not adding another one.

Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

John has not been CCed on some of the fixes which perhaps resulted
in the lack of review tags:

Subsystem MEDIATEK ETHERNET DRIVER
  Changes 50 / 295 (16%)
  Last activity: 2023-01-17
  Felix Fietkau <nbd@nbd.name>:
    Author 8bd8dcc5 2022-11-18 00:00:00 33
    Tags 8bd8dcc5 2022-11-18 00:00:00 38
  John Crispin <john@phrozen.org>:
  Sean Wang <sean.wang@mediatek.com>:
    Author 880c2d4b 2019-06-03 00:00:00 7
    Tags a5d75538 2020-04-07 00:00:00 10
  Mark Lee <Mark-MC.Lee@mediatek.com>:
    Author 8d66a818 2019-11-14 00:00:00 4
    Tags 8d66a818 2019-11-14 00:00:00 4
  Lorenzo Bianconi <lorenzo@kernel.org>:
    Author 08a764a7 2023-01-17 00:00:00 68
    Tags 08a764a7 2023-01-17 00:00:00 74
  Top reviewers:
    [12]: leonro@nvidia.com
    [6]: f.fainelli@gmail.com
    [6]: andrew@lunn.ch
  INACTIVE MAINTAINER John Crispin <john@phrozen.org>

map his old address to the up to date one.
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Veaceslav has stepped away from netdev:

Subsystem BONDING DRIVER
  Changes 96 / 319 (30%)
  Last activity: 2022-12-01
  Jay Vosburgh <j.vosburgh@gmail.com>:
    Author 4f5d33f4 2022-08-11 00:00:00 3
    Tags e5214f36 2022-12-01 00:00:00 48
  Veaceslav Falico <vfalico@gmail.com>:
  Andy Gospodarek <andy@greyhouse.net>:
    Tags 47f70626 2019-02-24 00:00:00 4
  Top reviewers:
    [42]: jay.vosburgh@canonical.com
    [18]: jiri@nvidia.com
    [10]: jtoppins@redhat.com
  INACTIVE MAINTAINER Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzkaller reports a memory leak of new_flow in ovs_flow_cmd_new() as it is
not freed when an allocation of a key fails.

BUG: memory leak
unreferenced object 0xffff888116668000 (size 632):
  comm "syz-executor231", pid 1090, jiffies 4294844701 (age 18.871s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000defa3494>] kmem_cache_zalloc include/linux/slab.h:654 [inline]
    [<00000000defa3494>] ovs_flow_alloc+0x19/0x180 net/openvswitch/flow_table.c:77
    [<00000000c67d8873>] ovs_flow_cmd_new+0x1de/0xd40 net/openvswitch/datapath.c:957
    [<0000000010a539a8>] genl_family_rcv_msg_doit+0x22d/0x330 net/netlink/genetlink.c:739
    [<00000000dff3302d>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
    [<00000000dff3302d>] genl_rcv_msg+0x328/0x590 net/netlink/genetlink.c:800
    [<000000000286dd87>] netlink_rcv_skb+0x153/0x430 net/netlink/af_netlink.c:2515
    [<0000000061fed410>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
    [<000000009dc0f111>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
    [<000000009dc0f111>] netlink_unicast+0x545/0x7f0 net/netlink/af_netlink.c:1339
    [<000000004a5ee816>] netlink_sendmsg+0x8e7/0xde0 net/netlink/af_netlink.c:1934
    [<00000000482b476f>] sock_sendmsg_nosec net/socket.c:651 [inline]
    [<00000000482b476f>] sock_sendmsg+0x152/0x190 net/socket.c:671
    [<00000000698574ba>] ____sys_sendmsg+0x70a/0x870 net/socket.c:2356
    [<00000000d28d9e11>] ___sys_sendmsg+0xf3/0x170 net/socket.c:2410
    [<0000000083ba9120>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
    [<00000000c00628f8>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
    [<000000004abfdcf4>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

To fix this the patch rearranges the goto labels to reflect the order of
object allocations and adds appropriate goto statements on the error
paths.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 68bb1010 ("openvswitch: Fix flow lookup to use unmasked key")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230201210218.361970-1-pchelkin@ispras.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

According to my tests on MT7621AT and MT7623NI SoCs, hardware DSA untagging
won't work on the second MAC. Therefore, disable this feature when the
second MAC of the MT7621 and MT7623 SoCs is being used.

Fixes: 2d7605a7 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
Link: https://lore.kernel.org/netdev/6249fc14-b38a-c770-36b4-5af6d41c21d3@arinc9.com/Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230128094232.2451947-1-arinc.unal@arinc9.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit in fixes tag frees rxq xdp info while RQ NAPI is
still enabled and packet processing may be ongoing.

Follow the mirror sequence of open() in the stop() callback.
This ensures that when rxq info is unregistered, no rx
packet processing is ongoing.

Fixes: 754b8a21 ("virtio_net: setup xdp_rxq_info")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20230202163516.12559-1-parav@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

UEFI v2.10 introduces version 2 of the memory attributes table, which
turns the reserved field into a flags field, but is compatible with
version 1 in all other respects. So let's not complain about version 2
if we encounter it.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The test tool can check that the zerocopy number of completions value is
valid taking into consideration the number of datagram send calls. This can
catch the system into a state where the datagrams are still in the system
(for example in a qdisk, waiting for the network interface to return a
completion notification, etc).

This change adds a retry logic of computing the number of completions up to
a configurable (via CLI) timeout (default: 2 seconds).

Fixes: 79ebc3c2 ("net/udpgso_bench_tx: options to exercise TX CMSG")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs
subsequently and while doing so, there is a chance that the rx one is not
ready to accept socket connections. This racing bug could fail the test
with at least one of the following:

./udpgso_bench_tx: connect: Connection refused
./udpgso_bench_tx: sendmsg: Connection refused
./udpgso_bench_tx: write: Connection refused

This change addresses this by making udpgro_bench.sh wait for the rx
program to be ready before firing off the tx one - up to a 10s timeout.

Fixes: 3a687bef ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Leaving unrecognized arguments buried in the output, can easily hide a
CLI/script typo. Avoid this by exiting when wrong arguments are provided to
the udpgso_bench test programs.

Fixes: 3a687bef ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This change fixes the following compiler warning:

/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may
be used uninitialized [-Wmaybe-uninitialized]
   40 |     __error_noreturn (__status, __errnum, __format,
   __va_arg_pack ());
         |
	 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	 udpgso_bench_rx.c: In function ‘main’:
	 udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here
	   253 |         int ret, len, gso_size, budget = 256;

Fixes: 3327a9c4 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-1-andrei.gherzan@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 2dc0b46b ("libata: sata_down_spd_limit should return if
driver has not recorded sstatus speed") changed the behavior of
sata_down_spd_limit() to return doing nothing if a drive does not report
a current link speed, to avoid reducing the link speed to the lowest 1.5
Gbps speed.

However, the change assumed that a speed was recorded before probing
(e.g. before a suspend/resume) and set in link->sata_spd. This causes
problems with adapters/drives combination failing to establish a link
speed during probe autonegotiation. One example reported of this problem
is an mvebu adapter with a 3Gbps port-multiplier box: autonegotiation
fails, leaving no recorded link speed and no reported current link
speed. Probe retries also fail as no action is taken by sata_set_spd()
after each retry.

Fix this by returning early in sata_down_spd_limit() only if we do have
a recorded link speed, that is, if link->sata_spd is not 0. With this
fix, a failed probe not leading to a recorded link speed is retried at
the lower 1.5 Gbps speed, with the link speed potentially increased
later on the second revalidate of the device if the device reports
that it supports higher link speeds.
Reported-by: Marius Dinu <marius@psihoexpert.ro>
Fixes: 2dc0b46b ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Marius Dinu <marius@psihoexpert.ro>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet,
pointing to the same chuwi_vi8_data as the existing CWI506 version
DMI match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com

If the a new ring layout is set, the max coalesced frames for RX and
TX are re-calculated, too. Add the missing assignment of the newly
calculated TX max coalesced frames.

Fixes: 656fc12d ("can: mcp251xfd: add TX IRQ coalescing ethtool support")
Link: https://lore.kernel.org/all/20230130154334.1578518-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The timer for the transmission of isotp PDUs formerly had two functions:
1. send two consecutive frames with a given time gap
2. monitor the timeouts for flow control frames and the echo frames

This led to larger txstate checks and potentially to a problem discovered
by syzbot which enabled the panic_on_warn feature while testing.

The former 'txtimer' function is split into 'txfrtimer' and 'txtimer'
to handle the two above functionalities with separate timer callbacks.

The two simplified timers now run in one-shot mode and make the state
transitions (especially with isotp_rcv_echo) better understandable.

Fixes: 86633786 ("can: isotp: fix tx state handling for echo tx processing")
Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # >= v6.0
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230104145701.2422-1-socketcan@hartkopp.netSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

When wait_event_interruptible() has been interrupted by a signal the
tx.state value might not be ISOTP_IDLE. Force the state machines
into idle state to inhibit the timer handlers to continue working.

Fixes: 86633786 ("can: isotp: fix tx state handling for echo tx processing")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230112192347.1944-1-socketcan@hartkopp.netSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

A CAN XL device is always capable to process CAN FD frames. The former
check when sending CAN FD frames relied on the existence of a CAN FD
device and did not check for a CAN XL device that would be correct
too.

With this patch the CAN FD feature is enabled automatically when CAN
XL is switched on - and CAN FD cannot be switch off while CAN XL is
enabled.

This precondition also leads to a clean up and reduction of checks in
the hot path in raw_rcv() and raw_sendmsg(). Some conditions are
reordered to handle simple checks first.

changes since v1: https://lore.kernel.org/all/20230131091012.50553-1-socketcan@hartkopp.net
- fixed typo: devive -> device
changes since v2: https://lore.kernel.org/all/20230131091824.51026-1-socketcan@hartkopp.net/
- reorder checks in if statements to handle simple checks first

Fixes: 62633269 ("can: raw: add CAN XL support")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230131105613.55228-1-socketcan@hartkopp.netSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().

Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.

        cpu0                            cpu1
                                j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
                                j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
				j1939_session_completed
				j1939_session_deactivate
				WARN_ON_ONCE(kref < 2)

=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
 j1939_session_deactivate_activate_next+0x11/0x28
 j1939_xtp_rx_eoma+0x12a/0x180
 j1939_tp_recv+0x4a2/0x510
 j1939_can_recv+0x226/0x380
 can_rcv_filter+0xf8/0x220
 can_receive+0x102/0x220
 ? process_backlog+0xf0/0x2c0
 can_rcv+0x53/0xf0
 __netif_receive_skb_one_core+0x67/0x90
 ? process_backlog+0x97/0x2c0
 __netif_receive_skb+0x22/0x80

Fixes: 0c71437d ("can: j1939: j1939_session_deactivate(): clarify lifetime of session object")
Reported-by: syzbot+9981a614060dcee6eeca@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20210906094200.95868-1-william.xuanziyang@huawei.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

netvsc_dma_map() and netvsc_dma_unmap() currently check the cp_partial
flag and adjust the page_count so that pagebuf entries for the RNDIS
portion of the message are skipped when it has already been copied into
a send buffer. But this adjustment has already been made by code in
netvsc_send(). The duplicate adjustment causes some pagebuf entries to
not be mapped. In a normal VM, this doesn't break anything because the
mapping doesn’t change the PFN. But in a Confidential VM,
dma_map_single() does bounce buffering and provides a different PFN.
Failing to do the mapping causes the wrong PFN to be passed to Hyper-V,
and various errors ensue.

Fix this by removing the duplicate adjustment in netvsc_dma_map() and
netvsc_dma_unmap().

Fixes: 846da38d ("net: netvsc: Add Isolation VM support for netvsc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1675135986-254490-1-git-send-email-mikelley@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>