When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090732.128282-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090721.128264-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

According to the datasheet, the DMIC config should
be changed to { 0, 2 ,3 }
Signed-off-by: Edgar <ljijcj@163.com>
Link: https://lore.kernel.org/r/20230719054722.401954-1-ljijcj@163.comSigned-off-by: Mark Brown <broonie@kernel.org>

When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090643.128213-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:

wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16

Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Dmytro Maluka <dmy@semihalf.com>:

This series includes 2 patches related to (but not fixing) the following
I2C failure which occurs sometimes during system suspend or resume and
indicates a problem with a spurious DA7219 interrupt:

[  355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[  355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[  355.876462] Call Trace:
[  355.876468]  <TASK>
[  355.876475]  ? update_load_avg+0x1b3/0x615
[  355.876484]  __i2c_transfer+0x101/0x1d8
[  355.876494]  i2c_transfer+0x74/0x10d
[  355.876504]  regmap_i2c_read+0x6a/0x9c
[  355.876513]  _regmap_raw_read+0x179/0x223
[  355.876521]  regmap_raw_read+0x1e1/0x28e
[  355.876527]  regmap_bulk_read+0x17d/0x1ba
[  355.876532]  ? __wake_up+0xed/0x1bb
[  355.876542]  da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[  355.876556]  irq_thread+0x13c/0x231
[  355.876563]  ? irq_forced_thread_fn+0x5f/0x5f
[  355.876570]  ? irq_thread_fn+0x4d/0x4d
[  355.876576]  kthread+0x13a/0x152
[  355.876581]  ? synchronize_irq+0xc3/0xc3
[  355.876587]  ? kthread_blkcg+0x31/0x31
[  355.876592]  ret_from_fork+0x1f/0x30
[  355.876601]  </TASK>

This log shows that DA7219 AAD interrupt handler da7219_aad_irq_thread()
is unexpectedly running when DA7219 is suspended and should not generate
interrupts. As a result, the IRQ handler is trying to read AAD IRQ event
status over I2C and is hitting the I2C driver "Transfer while suspended"
failure.

Patch #1 adds synchronize_irq() when suspending DA7219, to prevent the
IRQ handler from running after suspending if there is a pending IRQ
generated before suspending. With this patch the above failure is still
reproducible, so this patch does not fix any real observed issue so far,
but at least is useful for confirming that the above issue is not caused
by a pending IRQ but rather looks like a DA7219 hardware issue with an
unexpectedly generated IRQ.

Patch #2 does not fix the above issue either, but it prevents its
potentially harmful side effects. With the existing code, if the issue
occurs and the IRQ handler fails to read the AAD IRQ events status over
I2C, it does not check that and tries to use the garbage uninitialized
value of the events status, potentially reporting bogus events. This
patch fixes that by adding missing error checking.

In fact I'm sending these patches not only to submit them for review but
also to ask Renesas folks for any hints on a possible cause of the
described DA7219 issue (AAD interrupts spuriously firing after jack
detection is already disabled) or how to debug it further.

Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.

And add an entry for the Positivo CW14Q01P-V2 to the DMI table, so that
jack-detection will work properly on this laptop.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230719200241.4865-1-edson.drosdeck@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

When handling an AAD interrupt, if IRQ events read failed (for example,
due to i2c "Transfer while suspended" failure, i.e. when attempting to
read it while DA7219 is suspended, which may happen due to a spurious
AAD interrupt), the events array contains garbage uninitialized values.
So instead of trying to interprete those values and doing any actions
based on them (potentially resulting in misbehavior, e.g. reporting
bogus events), refuse to handle the interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/r/20230717193737.161784-3-dmy@semihalf.comSigned-off-by: Mark Brown <broonie@kernel.org>

da7219_aad_suspend() disables jack detection, which should prevent
generating new interrupts by DA7219 while suspended. However, there is a
theoretical possibility that there is a pending interrupt generated just
before suspending DA7219 and not handled yet, so the IRQ handler may
still run after DA7219 is suspended. To prevent that, wait until the
pending IRQ handling is done.

This patch arose as an attempt to fix the following I2C failure
occurring sometimes during system suspend or resume:

[  355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[  355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[  355.876462] Call Trace:
[  355.876468]  <TASK>
[  355.876475]  ? update_load_avg+0x1b3/0x615
[  355.876484]  __i2c_transfer+0x101/0x1d8
[  355.876494]  i2c_transfer+0x74/0x10d
[  355.876504]  regmap_i2c_read+0x6a/0x9c
[  355.876513]  _regmap_raw_read+0x179/0x223
[  355.876521]  regmap_raw_read+0x1e1/0x28e
[  355.876527]  regmap_bulk_read+0x17d/0x1ba
[  355.876532]  ? __wake_up+0xed/0x1bb
[  355.876542]  da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[  355.876556]  irq_thread+0x13c/0x231
[  355.876563]  ? irq_forced_thread_fn+0x5f/0x5f
[  355.876570]  ? irq_thread_fn+0x4d/0x4d
[  355.876576]  kthread+0x13a/0x152
[  355.876581]  ? synchronize_irq+0xc3/0xc3
[  355.876587]  ? kthread_blkcg+0x31/0x31
[  355.876592]  ret_from_fork+0x1f/0x30
[  355.876601]  </TASK>

which indicates that the AAD IRQ handler is unexpectedly running when
DA7219 is suspended, and as a result, is trying to read data from DA7219
over I2C and is hitting the I2C driver "Transfer while suspended"
failure.

However, with this patch the above failure is still reproducible. So
this patch does not fix any real observed issue so far, but at least is
useful for confirming that the above issue is not caused by a pending
IRQ but rather looks like a DA7219 hardware issue with an IRQ
unexpectedly generated after jack detection is already disabled.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/r/20230717193737.161784-2-dmy@semihalf.comSigned-off-by: Mark Brown <broonie@kernel.org>

There's several things here that will really help my CI.

Pull tracing fixes from Steven Rostedt:

 - Swapping the ring buffer for snapshotting (for things like irqsoff)
   can crash if the ring buffer is being resized. Disable swapping when
   this happens. The missed swap will be reported to the tracer

 - Report error if the histogram fails to be created due to an error in
   adding a histogram variable, in event_hist_trigger_parse()

 - Remove unused declaration of tracing_map_set_field_descr()

* tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/histograms: Return an error if we fail to add histogram to hist_vars list
  ring-buffer: Do not swap cpu_buffer during resize process
  tracing: Remove unused extern declaration tracing_map_set_field_descr()

Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix stale help text in gconfig

 - Support *.S files in compile_commands.json

 - Flatten KBUILD_CFLAGS

 - Fix external module builds with Rust so that temporary files are
   created in the modules directories instead of the kernel tree

* tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rust: avoid creating temporary files
  kbuild: flatten KBUILD_CFLAGS
  gen_compile_commands: add assembly files to compilation database
  kconfig: gconfig: correct program name in help text
  kconfig: gconfig: drop the Show Debug Info help text

`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).

Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.

Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.

Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes: 295d8398 ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Avoid pKVM finalization if KVM initialization fails

   - Add missing BTI instructions in the hypervisor, fixing an early
     boot failure on BTI systems

   - Handle MMU notifiers correctly for non hugepage-aligned memslots

   - Work around a bug in the architecture where hypervisor timer
     controls have UNKNOWN behavior under nested virt

   - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
     BUG in cpu hotplug resulting from per-CPU accessor sanity checking

   - Make WFI emulation on GICv4 systems robust w.r.t. preemption,
     consistently requesting a doorbell interrupt on vcpu_put()

   - Uphold RES0 sysreg behavior when emulating older PMU versions

   - Avoid macro expansion when initializing PMU register names,
     ensuring the tracepoints pretty-print the sysreg

  s390:

   - Two fixes for asynchronous destroy

  x86 fixes will come early next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: pv: fix index value of replaced ASCE
  KVM: s390: pv: simplify shutdown and fix race
  KVM: arm64: Fix the name of sys_reg_desc related to PMU
  KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
  KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
  KVM: arm64: Add missing BTI instructions
  KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
  KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
  KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
  KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits

Pull ext4 fixes from Ted Ts'o:
 "Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's
  checkpoint code"

* tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
  ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
  ext4: correct inline offset when handling xattrs in inode body
  jbd2: remove __journal_try_to_free_buffer()
  jbd2: fix a race when checking checkpoint buffer busy
  jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
  jbd2: remove journal_clean_one_cp_list()
  jbd2: remove t_checkpoint_io_list
  jbd2: recheck chechpointing non-dirty buffer

Pull smb client fix from Steve French:
 "Add minor debugging improvement.

  The change improves ability to read a network trace to debug problems
  on encrypted connections which are very common (e.g. using wireshark
  or tcpdump).

  That works today with tools like 'smbinfo keys /mnt/file' but requires
  passing in a filename on the mount (see e.g. [1]), but it often makes
  more sense to just pass in the mount point path (ie a directory not a
  filename).

  So this fix was needed to debug some types of problems (an obvious
  example is on an encrypted connection failing operations on an empty
  share or with no files in the root of the directory) - so you can
  simply pass in the 'smbinfo keys <mntpoint>' and get the information
  that wireshark needs"

Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1]

* tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: allow dumping keys for directories too

Merge tag 'kvm-s390-master-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

Two fixes for asynchronous destroy

Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.5, part #1

 - Avoid pKVM finalization if KVM initialization fails

 - Add missing BTI instructions in the hypervisor, fixing an early boot
   failure on BTI systems

 - Handle MMU notifiers correctly for non hugepage-aligned memslots

 - Work around a bug in the architecture where hypervisor timer controls
   have UNKNOWN behavior under nested virt.

 - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
   in cpu hotplug resulting from per-CPU accessor sanity checking.

 - Make WFI emulation on GICv4 systems robust w.r.t. preemption,
   consistently requesting a doorbell interrupt on vcpu_put()

 - Uphold RES0 sysreg behavior when emulating older PMU versions

 - Avoid macro expansion when initializing PMU register names, ensuring
   the tracepoints pretty-print the sysreg.

Commit 6018b585 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.

Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com

Cc: stable@vger.kernel.org
Fixes: 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When ring_buffer_swap_cpu was called during resize process,
the cpu buffer was swapped in the middle, resulting in incorrect state.
Continuing to run in the wrong state will result in oops.

This issue can be easily reproduced using the following two scripts:
/tmp # cat test1.sh
//#! /bin/sh
for i in `seq 0 100000`
do
         echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb
         sleep 0.5
         echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb
         sleep 0.5
done
/tmp # cat test2.sh
//#! /bin/sh
for i in `seq 0 100000`
do
        echo irqsoff > /sys/kernel/debug/tracing/current_tracer
        sleep 1
        echo nop > /sys/kernel/debug/tracing/current_tracer
        sleep 1
done
/tmp # ./test1.sh &
/tmp # ./test2.sh &

A typical oops log is as follows, sometimes with other different oops logs.

[  231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8
[  231.713375] Modules linked in:
[  231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.5.0-rc1-00276-g20edcec2 #15
[  231.716750] Hardware name: linux,dummy-virt (DT)
[  231.718152] Workqueue: events update_pages_handler
[  231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  231.721171] pc : rb_update_pages+0x378/0x3f8
[  231.722212] lr : rb_update_pages+0x25c/0x3f8
[  231.723248] sp : ffff800082b9bd50
[  231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[  231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0
[  231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a
[  231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000
[  231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510
[  231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002
[  231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558
[  231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001
[  231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000
[  231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208
[  231.744196] Call trace:
[  231.744892]  rb_update_pages+0x378/0x3f8
[  231.745893]  update_pages_handler+0x1c/0x38
[  231.746893]  process_one_work+0x1f0/0x468
[  231.747852]  worker_thread+0x54/0x410
[  231.748737]  kthread+0x124/0x138
[  231.749549]  ret_from_fork+0x10/0x20
[  231.750434] ---[ end trace 0000000000000000 ]---
[  233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  233.721696] Mem abort info:
[  233.721935]   ESR = 0x0000000096000004
[  233.722283]   EC = 0x25: DABT (current EL), IL = 32 bits
[  233.722596]   SET = 0, FnV = 0
[  233.722805]   EA = 0, S1PTW = 0
[  233.723026]   FSC = 0x04: level 0 translation fault
[  233.723458] Data abort info:
[  233.723734]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[  233.724176]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[  233.724589]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[  233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000
[  233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[  233.726720] Modules linked in:
[  233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.5.0-rc1-00276-g20edcec2 #15
[  233.727777] Hardware name: linux,dummy-virt (DT)
[  233.728225] Workqueue: events update_pages_handler
[  233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  233.729054] pc : rb_update_pages+0x1a8/0x3f8
[  233.729334] lr : rb_update_pages+0x154/0x3f8
[  233.729592] sp : ffff800082b9bd50
[  233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[  233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418
[  233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003
[  233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58
[  233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001
[  233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000
[  233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c
[  233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0
[  233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000
[  233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000
[  233.734418] Call trace:
[  233.734593]  rb_update_pages+0x1a8/0x3f8
[  233.734853]  update_pages_handler+0x1c/0x38
[  233.735148]  process_one_work+0x1f0/0x468
[  233.735525]  worker_thread+0x54/0x410
[  233.735852]  kthread+0x124/0x138
[  233.736064]  ret_from_fork+0x10/0x20
[  233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060)
[  233.736959] ---[ end trace 0000000000000000 ]---

After analysis, the seq of the error is as follows [1-5]:

int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
			int cpu_id)
{
	for_each_buffer_cpu(buffer, cpu) {
		cpu_buffer = buffer->buffers[cpu];
		//1. get cpu_buffer, aka cpu_buffer(A)
		...
		...
		schedule_work_on(cpu,
		 &cpu_buffer->update_pages_work);
		//2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to
		// update_pages_handler, do the update process, set 'update_done' in
		// complete(&cpu_buffer->update_done) and to wakeup resize process.
	//---->
		//3. Just at this moment, ring_buffer_swap_cpu is triggered,
		//cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer.
		//ring_buffer_swap_cpu is called as the 'Call trace' below.

		Call trace:
		 dump_backtrace+0x0/0x2f8
		 show_stack+0x18/0x28
		 dump_stack+0x12c/0x188
		 ring_buffer_swap_cpu+0x2f8/0x328
		 update_max_tr_single+0x180/0x210
		 check_critical_timing+0x2b4/0x2c8
		 tracer_hardirqs_on+0x1c0/0x200
		 trace_hardirqs_on+0xec/0x378
		 el0_svc_common+0x64/0x260
		 do_el0_svc+0x90/0xf8
		 el0_svc+0x20/0x30
		 el0_sync_handler+0xb0/0xb8
		 el0_sync+0x180/0x1c0
	//<----

	/* wait for all the updates to complete */
	for_each_buffer_cpu(buffer, cpu) {
		cpu_buffer = buffer->buffers[cpu];
		//4. get cpu_buffer, cpu_buffer(B) is used in the following process,
		//the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong.
		//for example, cpu_buffer(A)->update_done will leave be set 1, and will
		//not 'wait_for_completion' at the next resize round.
		  if (!cpu_buffer->nr_pages_to_update)
			continue;

		if (cpu_online(cpu))
			wait_for_completion(&cpu_buffer->update_done);
		cpu_buffer->nr_pages_to_update = 0;
	}
	...
}
	//5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong,
	//Continuing to run in the wrong state, then oops occurs.

Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cnSigned-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since commit 08d43a5f ("tracing: Add lock-free tracing_map"),
this is never used, so can be removed.

Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Make it slightly easier to see which compiler options are added and
removed (and not worry about column limit too!).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Like C source files, tooling can find it useful to have the assembly
source file compilation recorded.

The .S extension appears to used across all architectures.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.

To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:

  1. It must have it's logical start immediately to the left of
  (ie less than) original logical start.

  2. It must not be deleted

To find this pa we use the following traversal method:

1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.

2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.

3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.

4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.

This approach also takes care of having deleted PAs in the tree.

(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)

[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/

Cc: stable@kernel.org # 6.4
Fixes: 38727786 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).

After all the processing:

order = 1 order below goal len
min_order = maximum of the three:-
             - order - trim_order
             - 1 order below B2C(s_stripe)
             - 1 order above original len

Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted.  This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied.  If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region.  The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.

Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull powerpc fixes from Michael Ellerman:

 - Reinstate support for little endian ELFv1 binaries, which it turns
   out still exist in the wild.

 - Revert a change which used asm goto for WARN_ON/__WARN_FLAGS, as it
   lead to dead code generation and seemed to trigger compiler bugs in
   some edge cases.

 - Fix a deadlock in the pseries VAS code, between live migration and
   the driver's mmap handler.

 - Disable KCOV instrumentation in the powerpc KASAN code.

Thanks to Andrew Donnellan, Benjamin Gray, Christophe Leroy, Haren
Myneni, Russell Currey, and Uwe Kleine-König.

* tag 'powerpc-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc/64s: Remove support for ELFv1 little endian userspace"
  powerpc/kasan: Disable KCOV in KASAN code
  powerpc/512x: lpbfifo: Convert to platform remove callback returning void
  powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files
  Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto"
  powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close

From 2.43 to 2.44
Signed-off-by: Steve French <stfrench@microsoft.com>

Dumping the enc/dec keys is a session wide operation.
And it should not matter if the ioctl was run on
a regular file or a directory.

Currently, we obtain the tcon pointer from the
cifs file handle. But since there's no dir open call
in cifs, this is not populated for dirs.

This change allows dumping of session keys using ioctl
even for directories. To do this, we'll now get the
tcon pointer from the superblock, and not from the file
handle.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull s390 fixes from Heiko Carstens:

 - Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR)
   check to fault handler to prevent error handling for return values
   that don't indicate an error

 - Use kfree_sensitive() instead of kfree() in paes crypto code to clear
   memory that may contain keys before freeing it

 - Fix reply buffer size calculation for CCA replies in zcrypt device
   driver

* tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: fix reply buffer calculations for CCA replies
  s390/crypto: use kfree_sensitive() instead of kfree()
  s390/mm: fix per vma lock fault handling

Pull block fixes from Jens Axboe:

 - Fix for loop regressions (Mauricio)

 - Fix a potential stall with batched wakeups in sbitmap (David)

 - Fix for stall with recursive plug flushes (Ross)

 - Skip accounting of empty requests for blk-iocost (Chengming)

 - Remove a dead field in struct blk_mq_hw_ctx (Chengming)

* tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux:
  loop: do not enforce max_loop hard limit by (new) default
  loop: deprecate autoloading callback loop_probe()
  sbitmap: fix batching wakeup
  blk-iocost: skip empty flush bio in iocost
  blk-mq: delete dead struct blk_mq_hw_ctx->queued field
  blk-mq: Fix stall due to recursive flush plug

Pull io_uring fixes from Jens Axboe:

 - Fix for io-wq not always honoring REQ_F_NOWAIT, if it was set and
   punted directly (eg via DRAIN) (me)

 - Capability check fix (Ondrej)

 - Regression fix for the mmap changes that went into 6.4, which
   apparently broke IA64 (Helge)

* tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux:
  ia64: mmap: Consider pgoff when searching for free mapping
  io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()
  io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq
  io_uring: don't audit the capability check in io_uring_create()

Pull devicetree fixes from Rob Herring:

 - Fix moortec,mr75203 schema usage of 'multipleOf' keyword

 - Fix regression in systems depending on "of-display" device name

 - Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y

 - Drop two obsolete serial .txt bindings

* tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt
  dt-bindings: serial: Remove obsolete cavium-uart.txt
  dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients
  of: Preserve "of-display" device name for compatibility
  of: make OF_EARLY_FLATTREE depend on HAS_IOMEM

Pull regmap fixes from Mark Brown:
 "Three fixes here:

   - The issues with accounting for register and padding length on raw
     buses turn out to be quite widespread in custom buses.

     In order to avoid disturbing anything drop the initial fixes and
     fall back to a point fix in the SMBus code where the issue was
     originally noticed, a more substantial refactoring of the API which
     ensures that all buses make the same assumptions will follow.

   - The generic regcache code had been forcing on async I/O which did
     not work with the new maple tree sync code when used with SPI.

     Since that was mainly for the rbtree cache and the assumptions
     about hardware that drove the choice are probably not true any more
     fix this by pushing the enablement of async down into the rbtree
     code.

     This probably also makes cache syncs for systems faster though it's
     not the point.

   - The test code was triggering use of the rbtree and maple tree
     caches with dynamic allocation of nodes since all the testing is
     with RAM backed caches with no I/O performance issues.

     Just disable the locking in the tests to avoid triggering warnings
     when allocation debugging is turned on, it's not really what's
     being tested"

* tag 'regmap-fix-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Disable locking for RBTREE and MAPLE unit tests
  regcache: Push async I/O request down into the rbtree cache
  regmap: Account for register length in SMBus I/O limits
  regmap: Drop initial version of maximum transfer length fixes

Pull gpio fixes from Bartosz Golaszewski:

 - fix initial value handling for output-only pins in gpio-tps68470

 - fix two resource leaks in gpio-mvebu

* tag 'gpio-fixes-for-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mvebu: fix irq domain leak
  gpio: mvebu: Make use of devm_pwmchip_add
  gpio: tps68470: Make tps68470_gpio_output() always set the initial value

nxp,lpc1850-uart.txt binding is already covered by 8250.yaml, so remove
it.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230707221607.1064888-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

cavium-uart.txt binding is already covered by 8250.yaml, so remove it.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230707221602.1063972-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Problem:

The max_loop parameter is used for 2 different purposes:

1) initial number of loop devices to pre-create on init
2) maximum number of loop devices to add on access/open()

Historically, its default value (zero) caused 1) to create non-zero
number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on
2) to add devices with autoloading.

However, the default value changed in commit 85c50197 ("loop: Fix
the max_loop commandline argument treatment when it is set to 0") to
CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices.

That does improve 1), but unfortunately it breaks 2), as the default
behavior changed from no-limit to hard-limit.

Example:

For example, this userspace code broke for N >= CONFIG, if the user
relied on the default value 0 for max_loop:

    mknod("/dev/loopN");
    open("/dev/loopN");  // now fails with ENXIO

Though affected users may "fix" it with (loop.)max_loop=0, this means to
require a kernel parameter change on stable kernel update (that commit
Fixes: an old commit in stable).

Solution:

The original semantics for the default value in 2) can be applied if the
parameter is not set (ie, default behavior).

This still keeps the intended function in 1) and 2) if set, and that
commit's intended improvement in 1) if max_loop=0.

Before 85c50197:
  - default:     1) CONFIG devices   2) no limit
  - max_loop=0:  1) CONFIG devices   2) no limit
  - max_loop=X:  1) X devices        2) X limit

After 85c50197:
  - default:     1) CONFIG devices   2) CONFIG limit (*)
  - max_loop=0:  1) 0 devices (*)    2) no limit
  - max_loop=X:  1) X devices        2) X limit

This commit:
  - default:     1) CONFIG devices   2) no limit (*)
  - max_loop=0:  1) 0 devices        2) no limit
  - max_loop=X:  1) X devices        2) X limit

Future:

The issue/regression from that commit only affects code under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is
contained under it.

Once that deprecated functionality/code is removed, the purpose 2) of
max_loop (hard limit) is no longer in use, so the module parameter
description can be changed then.

Tests:

Linux 6.4-rc7
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLOCK_LEGACY_AUTOLOAD=y

- default (original)

	# ls -1 /dev/loop*
	/dev/loop-control
	/dev/loop0
	...
	/dev/loop7

	# ./test-loop
	open: /dev/loop8: No such device or address

- default (patched)

	# ls -1 /dev/loop*
	/dev/loop-control
	/dev/loop0
	...
	/dev/loop7

	# ./test-loop
	#

- max_loop=0 (original & patched):

	# ls -1 /dev/loop*
	/dev/loop-control

	# ./test-loop
	#

- max_loop=8 (original & patched):

	# ls -1 /dev/loop*
	/dev/loop-control
	/dev/loop0
	...
	/dev/loop7

	# ./test-loop
	open: /dev/loop8: No such device or address

- max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set)

	# ls -1 /dev/loop*
	/dev/loop-control

	# ./test-loop
	open: /dev/loop8: No such device or address

Fixes: 85c50197 ("loop: Fix the max_loop commandline argument treatment when it is set to 0")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The 'probe' callback in __register_blkdev() is only used under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard.

The loop_probe() function is only used for that callback, so guard it
too, accordingly.

See commit fbdee71b ("block: deprecate autoloading based on dev_t").
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-2-mfo@canonical.comSigned-off-by: Jens Axboe <axboe@kernel.dk>