When building kernel without CONFIG_FRAME_POINTER, gcc uses
CFA (canonical frame address) for frame base. With this patch,
perf probe just gets CFI (call frame information) from debuginfo
and search corresponding CFA from the CFI. IOW, this allows
perf probe works correctly on the kernel without CONFIG_FRAME_POINTER.

<Before>
 ./perf probe -fn sched_slice:12 lw.weight
  Fatal: DW_OP 156 is not supported.
              (^^^ DW_OP_call_frame_cfa)

<After>
./perf probe -fn sched_slice:12 lw.weight
Add new event:
  probe:sched_slice    (on sched_slice:12 with weight=lw.weight)

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171728.3790.98217.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add basic type casting for arguments to perf probe. This allows
users to specify the actual type of arguments. Of course, if
user sets invalid types, kprobe-tracer rejects that.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171722.3790.50372.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Query the basic type information (byte-size and signed-flag) from
debuginfo and pass that to kprobe-tracer. This is especially useful
for tracing the members of data structure, because each member has
different byte-size on the memory.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171715.3790.23730.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Support basic types of integer (u8, u16, u32, u64, s8, s16, s32, s64) in
kprobe tracer. With this patch, users can specify above basic types on
each arguments after ':'. If omitted, the argument type is set as
unsigned long (u32 or u64, arch-dependent).

 e.g.
  echo 'p account_system_time+0 hardirq_offset=%si:s32' > kprobe_events

  adds a probe recording hardirq_offset in signed-32bits value on the
  entry of account_system_time.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171708.3790.18599.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Set the last field name to the argument name when the argument
is refering a data-structure member.

e.g.
 ./perf probe --add 'vfs_read file->f_mode'
 Add new event:
   probe:vfs_read       (on vfs_read with f_mode=file->f_mode)

 This probe records file->f_mode, but the argument name becomes "f_mode".

This enables perf-trace command to parse trace event format correctly.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171700.3790.72961.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Set given names to event arguments. The syntax is same as kprobe-tracer,
you can add 'NAME=' right before each argument.

e.g.
  ./perf probe vfs_read foo=file

 then, 'foo' is set to the argument name as below.

  ./perf probe -l
  probe:vfs_read       (on vfs_read@linux-2.6-tip/fs/read_write.c with foo)

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171653.3790.74624.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

struct sort_entry has a callback named snprintf that turns an
entry into a string result.
But there are glibc versions that implement snprintf through a
macro. The following expression is then going to get the snprintf
call preprocessed:

        ent->snprintf(...)

to finally end up in a build error:

        util/hist.c: Dans la fonction «hist_entry__snprintf» :
        util/hist.c:539: erreur: «struct sort_entry» has no member named «__builtin___snprintf_chk»

To fix this, prepend struct sort_entry callbacks with an "se_"
prefix.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The cpu/task clock events implement their own version of exclusion
on top of exclude_user and exclude_kernel.

The result is that when the event triggered in the kernel but we
have exclude_kernel set, we try to rewind using task_pt_regs.
There are two side effects of this:

- we call task_pt_regs even on kernel threads, which doesn't give
  us the desired result.
- if the event occured in the kernel, we shouldn't rewind to the
  user context. We want to actually ignore the event.

get_irq_regs() will always give us the right interrupted context, so
use its result and submit it to perf_exclude_context() that knows
when an event must be ignored.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>

Each time a software event triggers, we need to walk through
the entire list of events from the current cpu and task contexts
to retrieve a running perf event that matches.
We also need to check a matching perf event is actually counting.

This walk is wasteful and makes the event fast path scaling
down with a growing number of events running on the same
contexts.

To solve this, we store the running perf events in a hashlist to
get an immediate access to them against their type:event_id when
they trigger.

v2: - Fix SWEVENT_HLIST_SIZE definition (and re-learn some basic
      maths along the way)
    - Only allocate hlist for online cpus, but keep track of the
      refcount on offline possible cpus too, so that we allocate it
      if needed when it becomes online.
    - Drop the kref use as it's not adapted to our tricks anymore.

v3: - Fix bad refcount check (address instead of value). Thanks to
      Eric Dumazet who spotted this.
    - While exiting cpu, move the hlist release out of the IPI path
      to lock the hlist mutex sanely.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>

Parsing an option from the command line with OPT_BOOLEAN on a
bool data type would not work on a big-endian machine due to the
manner in which the boolean was being cast into an int and
incremented. For example, running 'perf probe --list' on a
PowerPC machine would fail to properly set the list_events bool
and would therefore print out the usage information and
terminate.

This patch makes OPT_BOOLEAN work as expected with a bool
datatype. For cases where the original OPT_BOOLEAN was
intentionally being used to increment an int each time it was
passed in on the command line, this patch introduces OPT_INCR
with the old behaviour of OPT_BOOLEAN (the verbose variable is
currently the only such example of this).

I have reviewed every use of OPT_BOOLEAN to verify that a true
C99 bool was passed. Where integers were used, I verified that
they were only being used for boolean logic and changed them to
bools to ensure that they would not be mistakenly used as ints.
The major exception was the verbose variable which now uses
OPT_INCR instead of OPT_BOOLEAN.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport
Cc: Git development list <git@vger.kernel.org>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: WANG Cong <amwang@redhat.com>
Cc: Thiago Farina <tfransosi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

We need to create the $O/scripts/perl/Perf-Trace-Util/ directory too.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

That is not used in perf where we have the LOST events.

Without this patch we get:

[root@doppio ~]# perf lock report | head -3
  Warning: Error: expected 'data' but read 'overwrite'

So, to make the same perf command work with kernels with and without
this field, introduce variants for the parsing routines to not warn the
user in such case.

Discussed-with: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Correct typos in perf bench & perf sched help text.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20100331113100.cc898487.randy.dunlap@oracle.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

Fix spello in user message.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Cc: Paul Mackerra <paulus@samba.org>s
LKML-Reference: <20100331113056.2c7df509.randy.dunlap@oracle.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

Using 'pahole --packable' I found some structs that could be reorganized
to eliminate alignment holes, in some cases getting them to be cacheline
multiples.

[acme@doppio linux-2.6-tip]$ codiff perf.old ~/bin/perf
builtin-annotate.c:
  struct perf_session    |   -8
  struct perf_header     |   -8
 2 structs changed

builtin-diff.c:
  struct sample_data         |   -8
 1 struct changed
  diff__process_sample_event |   -8
 1 function changed, 8 bytes removed, diff: -8

builtin-sched.c:
  struct sched_atom      |   -8
 1 struct changed

builtin-timechart.c:
  struct per_pid         |   -8
 1 struct changed
  cmd_timechart          |  -16
 1 function changed, 16 bytes removed, diff: -16

builtin-probe.c:
  struct perf_probe_point |   -8
  struct perf_probe_event |   -8
 2 structs changed
  opt_add_probe_event     |   -3
 1 function changed, 3 bytes removed, diff: -3

util/probe-finder.c:
  struct probe_finder      |   -8
 1 struct changed
  find_kprobe_trace_events |  -16
 1 function changed, 16 bytes removed, diff: -16

/home/acme/bin/perf:
 4 functions changed, 43 bytes removed, diff: -43
[acme@doppio linux-2.6-tip]$

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Esc + Enter should be enough warning to avoid accidentaly exiting from
the browser.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Suggested-by: Ingo Molnar <molnar@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Semantic conflict: arch/x86/kernel/cpu/perf_event_intel_ds.c

Merge reason: pick up latest fixes, fix the conflict
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  hvc_console: Fix race between hvc_close and hvc_remove
  virtio: disable multiport console support.
  virtio: console makes incorrect assumption about virtio API
  virtio: console: Fix early_put_chars usage
  MAINTAINERS: Put the virtio-console entry in correct alphabetical order

I don't claim to understand the tty layer, but it seems like hvc_open and
hvc_close should be balanced in their kref reference counting.

Right now we get a kref every call to hvc_open:

        if (hp->count++ > 0) {
                tty_kref_get(tty); <----- here
                spin_unlock_irqrestore(&hp->lock, flags);
                hvc_kick();
                return 0;
        } /* else count == 0 */

        tty->driver_data = hp;

        hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0

But hvc_close has:

        tty_kref_get(tty);

        if (--hp->count == 0) {
...
                /* Put the ref obtained in hvc_open() */
                tty_kref_put(tty);
...
        }

        tty_kref_put(tty);

Since the outside kref get/put balance we only do a single kref_put when
count reaches 0.

The patch below changes things to call tty_kref_put once for every
hvc_close call, and with that my machine boots fine.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Move MULTIPORT feature and related config changes
out of exported headers, and disable the feature
at runtime.

At this point, it seems less risky to keep code around
until we can enable it than rip it out completely.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The get_buf() API sets the second arg to the number of bytes *written*
by the other side; in this case it should be zero as these are output buffers.

lguest gets this right (obviously kvm's console doesn't), resulting in
continual buildup of console writes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Amit Shah <amit.shah@redhat.com>

Currently early_put_chars is not used by virtio_console because it can
only be used once a port has been found, at which point it's too late
because it is no longer needed. This patch should fix it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Move around the entry for virtio-console to keep the file sorted.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

rwsems can be used with IRQs disabled, particularily in early boot
before IRQs are enabled.  Currently the spin_unlock_irq() usage in the
slow-patch will unconditionally enable interrupts and cause problems
since interrupts are not yet initialized or enabled.

This patch uses save/restore versions of IRQ spinlocks in the slowpath
to ensure interrupts are not unintentionally disabled.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

	If nfs atomic open implementation ends up doing open request from
->d_revalidate() codepath and gets an error from server, return that error
to caller explicitly and don't bother with lookup_instantiate_filp() at all.
->d_revalidate() can return an error itself just fine...

See
	http://bugzilla.kernel.org/show_bug.cgi?id=15674
	http://marc.info/?l=linux-kernel&m=126988782722711&w=2

for original report.
Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Enable Nehalem-EX support
  perf kmem: Fix breakage introduced by 5a0e3ad6 slab.h script

Merge branch 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci:
  davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>
  davinci: DM365: fix duplicate default IRQ priorities
  davinci: edma: clear events in edma_start()
  davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined
  davinci: timers: don't enable timer until clocksource is initialized

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards
  x86: Increase CONFIG_NODES_SHIFT max to 10
  ibft, x86: Change reserve_ibft_region() to find_ibft_region()
  x86, hpet: Fix bug in RTC emulation
  x86, hpet: Erratum workaround for read after write of HPET comparator
  bootmem, x86: Fix 32bit numa system without RAM on node 0
  nobootmem, x86: Fix 32bit numa system without RAM on node 0
  x86: Handle overlapping mptables
  x86: Make e820_remove_range to handle all covered case
  x86-32, resume: do a global tlb flush in S4 resume

This hushes the following warning:

arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’
declared inside parameter list
arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this
definition or declaration, which is probably not what you want
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove unused variable from ptrace
  microblaze: io.h: Add io big-endian function
  microblaze: Enable memory leak detector
  microblaze: Fix futex code
  microblaze: Fix ftrace_update_ftrace_func panic

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: mixart: range checking proc file
  ALSA: hda - Fix a wrong array range check in patch_realtek.c
  ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream
  ALSA: hda - Enable amplifiers on Acer Inspire 6530G
  ASoC: Only do WM8994 bias off transition from standby
  ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices
  ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction
  ASoC: Support second DC servo readback method for wm_hubs
  ASoC: Avoid wraparound in wm_hubs DC servo correction
  ALSA: echoaudio - Eliminate use after free
  ALSA: i2c: cleanup: change parameter to pointer
  ALSA: hda - Add MSI blacklist for Aopen MZ915-M
  ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code
  ALSA: hda - Update document about MSI and interrupts
  ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981
  ALSA: hda - Add missing printk argument in previous patch
  ASoC: Fix passing platform_data to ac97 bus users and fix a leak
  ALSA: hda - Fix ADC/MUX assignment of ALC269 codec
  ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo()
  ASoC: wm8994: playback => capture

* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc:
  nodemask: include slab.h from drivers/base/node.c

Order the debugfs statistics correctly.  The values displayed through a
seq_printf() statement should be in the same order as the names in the
format string.

In the 'Lookups' line, objects created ('crt=') and lookups timed out
('tmo=') have their values transposed.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In NOMMU mode, the FRV segment handling is broken because KERNEL_DS ==
USER_DS.  This causes tests of the following sort:

	/* don't pin down non-user-based iovecs */
	if (segment_eq(get_fs(), KERNEL_DS))
		return NULL;

to malfunction.

To fix this, make USER_DS the top of RAM instead of the top of the non-IO
address space, and make KERNEL_DS one more than the top of the non-IO
address space.

Also get rid of FRV's __addr_ok() as nothing uses it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Hide uncached_access() when pgprot_noncached is not #defined.  This prevents
the following warning:

	  CC      drivers/char/mem.o
	drivers/char/mem.c:229: warning: 'uncached_access' defined but not used

Repairs d7d4d849 ("drivers/char/mem.c:
cleanups").
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On exit paths in mxc_rtc_probe() method some resources are not freed
correctly.

This patch fixes:
* unrequested memory region containing imx RTC registers
* iounmap() isn't called on exit_free_pdata branch
* clock get rate is called for freed clock source
* clock isn't disabled on exit_put_clk branch

To simplify the fix managed device resources are used.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Presently, memcg's FILE_MAPPED accounting has following race with
move_account (happens at rmdir()).

    increment page->mapcount (rmap.c)
    mem_cgroup_update_file_mapped()           move_account()
					      lock_page_cgroup()
					      check page_mapped() if
					      page_mapped(page)>1 {
						FILE_MAPPED -1 from old memcg
						FILE_MAPPED +1 to old memcg
					      }
					      .....
					      overwrite pc->mem_cgroup
					      unlock_page_cgroup()
    lock_page_cgroup()
    FILE_MAPPED + 1 to pc->mem_cgroup
    unlock_page_cgroup()

Then,
	old memcg (-1 file mapped)
	new memcg (+2 file mapped)

This happens because move_account see page_mapped() which is not guarded
by lock_page_cgroup().  This patch adds FILE_MAPPED flag to page_cgroup
and move account information based on it.  Now, all checks are synchronous
with lock_page_cgroup().
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@in.ibm.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Righi <arighi@develer.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When we look into pagemap using page-types with option -p, the value of
pfn for hugepages looks wrong (see below.) This is because pte was
evaluated only once for one vma although it should be updated for each
hugepage.  This patch fixes it.

  $ page-types -p 3277 -Nl -b huge
  voffset   offset  len     flags
  7f21e8a00 11e400  1       ___U___________H_G________________
  7f21e8a01 11e401  1ff     ________________TG________________
               ^^^
  7f21e8c00 11e400  1       ___U___________H_G________________
  7f21e8c01 11e401  1ff     ________________TG________________
               ^^^

One hugepage contains 1 head page and 511 tail pages in x86_64 and each
two lines represent each hugepage.  Voffset and offset mean virtual
address and physical address in the page unit, respectively.  The
different hugepages should not have the same offset value.

With this patch applied:

  $ page-types -p 3386 -Nl -b huge
  voffset   offset   len    flags
  7fec7a600 112c00   1      ___UD__________H_G________________
  7fec7a601 112c01   1ff    ________________TG________________
               ^^^
  7fec7a800 113200   1      ___UD__________H_G________________
  7fec7a801 113201   1ff    ________________TG________________
               ^^^
               OK

More info:

- This patch modifies walk_page_range()'s hugepage walker.  But the
  change only affects pagemap_read(), which is the only caller of hugepage
  callback.

- Without this patch, hugetlb_entry() callback is called per vma, that
  doesn't match the natural expectation from its name.

- With this patch, hugetlb_entry() is called per hugepte entry and the
  callback can become much simpler.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The log of commit edaac8e3 ("ratelimit:
Fix/allow use in atomic contexts"), indicates that we want to suppress the
callback when the trylock fails.
Signed-off-by: Yong Zhang <yong.zhang@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>