- 30 Mar, 2009 40 commits
-
-
Alexey Klimov authored
Cleanups of many if-check constructions. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jochen Friedrich authored
Add MC44S803 support to AF9015 driver. Signed-off-by:
Jochen Friedrich <jochen@scram.de> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jochen Friedrich authored
Add Freescale MC44S803 tuner driver. Signed-off-by:
-
Andy Walls authored
Sliced VBI, in the manner that ivtv implements it as a separate data stream, now works for 525 line 60 Hz systems like NTSC-M. It may work for 625 line 50 Hz systems, but I have more engineering work to do, to verify it is operating properly. Sliced data insertion into the MPEG PS should be working, but is untested. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
The cx23418 appears to send Raw VBI buffers with a PTS on a per frame basis, not per field, so process Raw VBI on a whole frame basis and reduce some complexity. Fix VBI buffer size computation to handle a whole frame of Raw VBI for a 625 line system, which is the worst case and will work for 525 lines systems as well. Signed-off-by:
-
Andy Walls authored
Fixed an endianess problem with the collection of the PTS from the VBI buffer given to us by the encoder. Also extrapolated the last 12 bytes of the last line of each field, to remove artifacts created by removing the first 12 bytes of each field for raw VBI. Signed-off-by:
-
Andy Walls authored
The driver was incorrectly setting 0 line counts in a firmware API call to set the maximum amount of lines per field. Signed-off-by:
-
Andy Walls authored
The Encoder will only allow the Raw VBI parameters, along with a number of other API parameters, to take effect when no analog captures are in progress. These parameters must be set before the first analog capture starts, be it MPEG, VBI, YUV, etc., and cannot be changed until the last one stops. It is not obvious to me what capture channel API parameters are shared and which ones must be set per capture channel, so set them all for every analog capture channel start up. This fixes the driver so that VBI capture can be started up after the MPEG capture is going. Signed-off-by:
-
Andy Walls authored
More sliced VBI fixes to bring the cx18 driver closer to full V4L2 spec compliance for VBI and to get sliced VBI working better. Signed-off-by:
-
Andy Walls authored
The old code from ivtv used a CX23415/6 PTS, which was simply left at 0 in the cx18 driver. Since the CX23418 gives us what I think is a PTS (or some other 90 kHz clock count) with each VBI buffer, this change has the cx18 driver use that as a PTS. Signed-off-by:
-
Andy Walls authored
Removed legacy ivtv state variables, added comments, and cleaned up sliced VBI related code. Enabled sliced VBI. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
The CX18_AUDIO_ENABLE register usually never reads back what was just written under normal circumstances. Perform better checking that a write went to the register as expected with a specification of what bits to verify. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
This patch also enables the autogain for the mt9v111. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
The mi1310_soc sequences come from the ms-win driver C0130Dev.inf. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Data debug for i2c transactions was provided by the functions called by dib0700_i2c_xfer_legacy, but not dib0700_i2c_xfer_new. This patch adds the missing data debug dumps to dib0700_i2c_xfer_new. Signed-off-by:
-
Igor M. Liplianin authored
Some cards uses cx24116 LNB_DC pin for LNB power control, some not uses, some uses it different way, like HVR-4000. Tested-by : Edgar Hucek <gimli@dark-green.com> Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Hans Verkuil authored
I2C_DRIVERIDs are phased out. Remove those that are unused at the moment. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
A hue of -128 was rejected due to an incorrect range check, which was faithfully copy-and-pasted into four drivers... Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Most boards nowadays supports saa7134-alsa. Even some of they doesn't have any option to wire an audio cable. So, lets load saa7134-alsa by default, if the board is not based on saa7130 and if saa7134-alsa is compiled. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
saa7134: Fix tuner access on Kworld ATSC110 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by:
-
Hans Werner authored
Here is a patch which adds some documentation about meanings of the the lnbp21 system register bits. Signed-off-by:
Hans Werner <hwerner4@gmx.de> Signed-off-by:
-
Jan Engelhardt authored
dvb: constify VFTs Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
