- 30 Oct, 2014 40 commits
-
-
Frans Klaver authored
commit dc318756 upstream. If the chosen baud rate is large enough (e.g. 3.5 megabaud), the calculated n values in serial_omap_is_baud_mode16() may become 0. This causes a division by zero when calculating the difference between calculated and desired baud rates. To prevent this, cap the n13 and n16 values on 1. Division by zero in kernel. [<c00132e0>] (unwind_backtrace) from [<c00112ec>] (show_stack+0x10/0x14) [<c00112ec>] (show_stack) from [<c01ed7bc>] (Ldiv0+0x8/0x10) [<c01ed7bc>] (Ldiv0) from [<c023805c>] (serial_omap_baud_is_mode16+0x4c/0x68) [<c023805c>] (serial_omap_baud_is_mode16) from [<c02396b4>] (serial_omap_set_termios+0x90/0x8d8) [<c02396b4>] (serial_omap_set_termios) from [<c0230a0c>] (uart_change_speed+0xa4/0xa8) [<c0230a0c>] (uart_change_speed) from [<c0231798>] (uart_set_termios+0xa0/0x1fc) [<c0231798>] (uart_set_termios) from [<c022bb44>] (tty_set_termios+0x248/0x2c0) [<c022bb44>] (tty_set_termios) from [<c022c17c>] (set_termios+0x248/0x29c) [<c022c17c>] (set_termios) from [<c022c3e4>] (tty_mode_ioctl+0x1c8/0x4e8) [<c022c3e4>] (tty_mode_ioctl) from [<c0227e70>] (tty_ioctl+0xa94/0xb18) [<c0227e70>] (tty_ioctl) from [<c00cf45c>] (do_vfs_ioctl+0x4a0/0x560) [<c00cf45c>] (do_vfs_ioctl) from [<c00cf568>] (SyS_ioctl+0x4c/0x74) [<c00cf568>] (SyS_ioctl) from [<c000e480>] (ret_fast_syscall+0x0/0x30) Signed-off-by:
Frans Klaver <frans.klaver@xsens.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Willy Tarreau authored
commit 72cf9012 upstream. This fix ensures that we never meet an integer overflow while adding 255 while parsing a variable length encoding. It works differently from commit 206a81c1 ("lzo: properly check for overruns") because instead of ensuring that we don't overrun the input, which is tricky to guarantee due to many assumptions in the code, it simply checks that the cumulated number of 255 read cannot overflow by bounding this number. The MAX_255_COUNT is the maximum number of times we can add 255 to a base count without overflowing an integer. The multiply will overflow when multiplying 255 by more than MAXINT/255. The sum will overflow earlier depending on the base count. Since the base count is taken from a u8 and a few bits, it is safe to assume that it will always be lower than or equal to 2*255, thus we can always prevent any overflow by accepting two less 255 steps. This patch also reduces the CPU overhead and actually increases performance by 1.1% compared to the initial code, while the previous fix costs 3.1% (measured on x86_64). The fix needs to be backported to all currently supported stable kernels. Reported-by:
Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
commit af958a38 upstream. This reverts commit 206a81c1 ("lzo: properly check for overruns"). As analysed by Willem Pinckaers, this fix is still incomplete on certain rare corner cases, and it is easier to restart from the original code. Reported-by:
-
Willy Tarreau authored
commit d98a0526 upstream. Add a complete description of the LZO format as processed by the decompressor. I have not found a public specification of this format hence this analysis, which will be used to better understand the code. Cc: Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Signed-off-by:
-
Olga Kornievskaia authored
commit 8faaa6d5 upstream. Commit c9fdeb28 removed a 'continue' after checking if the lease needs to be renewed. However, if client hasn't moved, the code falls down to starting reboot recovery erroneously (ie., sends open reclaim and gets back stale_clientid error) before recovering from getting stale_clientid on the renew operation. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Fixes: c9fdeb28 (NFS: Add basic migration support to state manager thread) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit e4dc601b upstream. hwreg_present() and hwreg_write() temporarily change the VBR register to another vector table. This table contains a valid bus error handler only, all other entries point to arbitrary addresses. If an interrupt comes in while the temporary table is active, the processor will start executing at such an arbitrary address, and the kernel will crash. While most callers run early, before interrupts are enabled, or explicitly disable interrupts, Finn Thain pointed out that macsonic has one callsite that doesn't, causing intermittent boot crashes. There's another unsafe callsite in hilkbd. Fix this for good by disabling and restoring interrupts inside hwreg_present() and hwreg_write(). Explicitly disabling interrupts can be removed from the callsites later. Reported-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Alexander Usyskin authored
commit cfda2794 upstream. function 'strncpy' will fill whole buffer 'id.name' of fixed size (32) with string value and will not leave place for NULL-terminator. Possible buffer boundaries violation in following string operations. Replace strncpy with strlcpy. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit b29ef354 upstream. Minimize failures in this function by pre-allocating the buffer for posting messages. The hypercall for posting the message can fail for a number of reasons: 1. Transient resource related issues 2. Buffer alignment 3. Buffer cannot span a page boundry We address issues 2 and 3 by preallocating a per-cpu page for the buffer. Transient resource related failures are handled by retrying by the callers of this function. This patch is based on the investigation done by Dexuan Cui <decui@microsoft.com>. I would like to thank Sitsofe Wheeler <sitsofe@yahoo.com> for reporting the issue and helping in debuggging. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reported-by:
Sitsofe Wheeler <sitsofe@yahoo.com> Tested-by:
-
K. Y. Srinivasan authored
commit 45d727ce upstream. Fix a bug in vmbus_open() and properly propagate the error. I would like to thank Dexuan Cui <decui@microsoft.com> for identifying the issue. Signed-off-by:
-
K. Y. Srinivasan authored
commit 72c6b71c upstream. Eliminate the call to BUG_ON() by waiting for the host to respond. We are trying to reclaim the ownership of memory that was given to the host and so we will have to wait until the host responds. Signed-off-by:
-
K. Y. Srinivasan authored
commit 98d731bb upstream. Eliminate calls to BUG_ON() in vmbus_close_internal(). We have chosen to potentially leak memory, than crash the guest in case of failures. In this version of the patch I have addressed comments from Dan Carpenter (dan.carpenter@oracle.com). Signed-off-by:
-
K. Y. Srinivasan authored
commit 66be6530 upstream. Eliminate calls to BUG_ON() by properly handling errors. In cases where rollback is possible, we will return the appropriate error to have the calling code decide how to rollback state. In the case where we are transferring ownership of the guest physical pages to the host, we will wait for the host to respond. Signed-off-by:
-
K. Y. Srinivasan authored
commit fdeebcc6 upstream. Posting messages to the host can fail because of transient resource related failures. Correctly deal with these failures and increase the number of attempts to post the message before giving up. In this version of the patch, I have normalized the error code to Linux error code. Signed-off-by:
-
K. Y. Srinivasan authored
commit bc5a5b02 upstream. Properly pack the data for file copy functionality. Patch based on investigation done by Matej Muzila <mmuzila@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Will Deacon authored
commit 1059c6bf upstream. When returning from a debug exception taken from EL1, we unmask debug exceptions after handling the exception. This is crucial for debug exceptions taken from EL0, so that any kernel work on the ret_to_user path can be debugged by kgdb. However, when returning back to EL1 the only thing left to do is to restore the original register state before the exception return. If single-step has been enabled by the debug exception handler, we will get stuck in an infinite debug exception loop, since we will take the step exception as soon as we unmask debug exceptions. This patch avoids unmasking debug exceptions on the debug exception return path when the exception was taken from EL1. Fixes: 2a283070 (arm64: debug: avoid accessing mdscr_el1 on fault paths where possible) Reported-by:
David Long <dave.long@linaro.org> Reported-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kees Cook authored
commit 471b095d upstream. An empty firmware request name will trigger warnings when building device names. Make sure this is caught earlier and rejected. The warning was visible via the test_firmware.ko module interface: echo -ne "\x00" > /sys/devices/virtual/misc/test_firmware/trigger_request Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
-
Xuelin Shi authored
commit 87cea763 upstream. the partial xor result must be kept until the next tx is generated. Signed-off-by:
Xuelin Shi <xuelin.shi@freescale.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Joe Lawrence authored
commit db7157d4 upstream. Once calling scsi_host_put, be careful to not access qla_hw_data through the Scsi_Host private data (ie, scsi_qla_host base_vha). Fixes: fe1b806f ("qla2xxx: Refactor shutdown code so some functionality can be reused") Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Arun Easi authored
commit 75554b68 upstream. Signed-off-by:
Arun Easi <arun.easi@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Himanshu Madhani authored
commit 78c2106a upstream. This patch is to fix regression added by commit id 51a07f84. When allocating memory for new session original patch does not assign vha to op->vha resulting into NULL pointer access during qlt_create_sess_from_atio(). Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Steffen Trumtrar authored
commit c5bb725a upstream. VCCR is used as a trigger to start voltage transitions, so we need to mark it volatile in order to make sure it gets written to hardware every time we set a new voltage. Fixes regulator voltage being stuck at the first voltage set after driver load. [lst: reworded commit message] Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Chris J Arges authored
commit 4089b71c upstream. When using a virtual SCSI disk in a VMWare VM if blkdev_issue_zeroout is used data can be improperly zeroed out using the mptfusion driver. This patch disables write_same for this driver and the vmware subsystem_vendor which ensures that manual zeroing out is used instead. BugLink: http://bugs.launchpad.net/bugs/1371591Reported-by:
Bruce Lucas <bruce.lucas@mongodb.com> Tested-by:
Chris J Arges <chris.j.arges@canonical.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Mike Christie authored
commit a41a9ad3 upstream. Dan Carpenter found a issue where be2iscsi would copy the ip from userspace to the driver buffer before checking the len of the data being copied: http://marc.info/?l=linux-scsi&m=140982651504251&w=2 This patch just has us only copy what we the driver buffer can support. Tested-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Xiubo Li authored
commit d6b41cb0 upstream. Since we cannot make sure the 'val_count' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by:
Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by:
-
Pankaj Dubey authored
commit 5336be84 upstream. If LOG_DEVICE is defined and map->dev is NULL it will lead to NULL pointer dereference. This patch fixes this issue by adding check for dev->NULL in all such places in regmap.c Signed-off-by:
Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by:
-
Xiubo Li authored
commit 2c98e0c1 upstream. If 'map->dev' is NULL and there will lead dev_name() to be NULL pointer dereference. So before dev_name(), we need to have check of the map->dev pionter. We also should make sure that the 'name' pointer shouldn't be NULL for debugfs_create_dir(). So here using one default "dummy" debugfs name when the 'name' pointer and 'map->dev' are both NULL. Signed-off-by:
-
Borislav Petkov authored
commit a18c3f16 upstream. The other two interrupt handlers in this driver are shared, except this one. When loading the driver, it fails like this. So make the IRQ line shared. Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software mpc85xx_mc_err_probe: No ECC DIMMs discovered EDAC DEVICE0: Giving out device to module MPC85xx_edac controller mpc85xx_l2_err: DEV mpc85xx_l2_err (INTERRUPT) genirq: Flags mismatch irq 16. 00000000 ([EDAC] L2 err) vs. 00000080 ([EDAC] PCI err) mpc85xx_l2_err_probe: Unable to request irq 16 for MPC85xx L2 err remove_proc_entry: removing non-empty directory 'irq/16', leaking at least 'aerdrv' ------------[ cut here ]------------ WARNING: at fs/proc/generic.c:521 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc5-dirty #1 task: ee058000 ti: ee046000 task.ti: ee046000 NIP: c016c0c4 LR: c016c0c4 CTR: c037b51c REGS: ee047c10 TRAP: 0700 Not tainted (3.17.0-rc5-dirty) MSR: 00029000 <CE,EE,ME> CR: 22008022 XER: 20000000 GPR00: c016c0c4 ee047cc0 ee058000 00000053 00029000 00000000 c037c744 00000003 GPR08: c09aab28 c09aab24 c09aab28 00000156 20008028 00000000 c0002ac8 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000139 c0950394 GPR24: c09f0000 ee5585b0 ee047d08 c0a10000 ee047d08 ee15f808 00000002 ee03f660 NIP [c016c0c4] remove_proc_entry LR [c016c0c4] remove_proc_entry Call Trace: remove_proc_entry (unreliable) unregister_irq_proc free_desc irq_free_descs mpc85xx_l2_err_probe platform_drv_probe really_probe __driver_attach bus_for_each_dev bus_add_driver driver_register mpc85xx_mc_init do_one_initcall kernel_init_freeable kernel_init ret_from_kernel_thread Instruction dump: ... Reported-and-tested-by: <lpb_098@163.com> Acked-by:
Johannes Thumshirn <johannes.thumshirn@men.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Benjamin Tissoires authored
commit 5b65c2a0 upstream. In the Dell XPS 13 9333, it appears that sometimes the bus get confused and corrupts the incoming data. It fills the input report with the sentinel value "ff". Synaptics told us that such behavior does not comes from the touchpad itself, so we filter out such reports here. Unfortunately, we can not simply discard the incoming data because they may contain useful information. Most of the time, the misbehavior is quite near the end of the report, so we can still use the valid part of it. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1123584Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Andrew Duggan <aduggan@synaptics.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andy Shevchenko authored
commit fb57862e upstream. If the driver was compiled with DMA support, but DMA channels weren't acquired by some reason, mid_spi_dma_exit() will crash the kernel. Fixes: 7063c0d9 (spi/dw_spi: add DMA support) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
commit b41583e7 upstream. In case of 8 bit mode and DMA usage we end up with every second byte written as 0. We have to respect bits_per_word settings what this patch actually does. Signed-off-by:
-
Bryan O'Donoghue authored
commit ee1b5b16 upstream. Quark x1000 advertises PGE via the standard CPUID method PGE bits exist in Quark X1000's PTEs. In order to flush an individual PTE it is necessary to reload CR3 irrespective of the PTE.PGE bit. See Quark Core_DevMan_001.pdf section 6.4.11 This bug was fixed in Galileo kernels, unfixed vanilla kernels are expected to crash and burn on this platform. Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1411514784-14885-1-git-send-email-pure.logic@nexus-software.ieSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit d974baa3 upstream. CR4 isn't constant; at least the TSD and PCE bits can vary. TBH, treating CR0 and CR3 as constant scares me a bit, too, but it looks like it's correct. This adds a branch and a read from cr4 to each vm entry. Because it is extremely likely that consecutive entries into the same vcpu will have the same host cr4 value, this fixes up the vmcs instead of restoring cr4 after the fact. A subsequent patch will add a kernel-wide cr4 shadow, reducing the overhead in the common case to just two memory reads and a branch. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Matlack authored
commit 2ea75be3 upstream. vcpu ioctls can hang the calling thread if issued while a vcpu is running. However, invalid ioctls can happen when userspace tries to probe the kind of file descriptors (e.g. isatty() calls ioctl(TCGETS)); in that case, we know the ioctl is going to be rejected as invalid anyway and we can fail before trying to take the vcpu mutex. This patch does not change functionality, it just makes invalid ioctls fail faster. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
Christian Borntraeger authored
commit f346026e upstream. We must not fallthrough if the conditions for external call are not met. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by:
-
Paolo Bonzini authored
commit 00f034a1 upstream. The next patch will give a meaning (a la seqcount) to the low bit of the generation number. Ensure that it matches between kvm->memslots->generation and kvm_current_mmio_generation(). Reviewed-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
-
David Matlack authored
commit ee3d1570 upstream. vcpu exits and memslot mutations can run concurrently as long as the vcpu does not aquire the slots mutex. Thus it is theoretically possible for memslots to change underneath a vcpu that is handling an exit. If we increment the memslot generation number again after synchronize_srcu_expedited(), vcpus can safely cache memslot generation without maintaining a single rcu_dereference through an entire vm exit. And much of the x86/kvm code does not maintain a single rcu_dereference of the current memslots during each exit. We can prevent the following case: vcpu (CPU 0) | thread (CPU 1) --------------------------------------------+-------------------------- 1 vm exit | 2 srcu_read_unlock(&kvm->srcu) | 3 decide to cache something based on | old memslots | 4 | change memslots | (increments generation) 5 | synchronize_srcu(&kvm->srcu); 6 retrieve generation # from new memslots | 7 tag cache with new memslot generation | 8 srcu_read_unlock(&kvm->srcu) | ... | <action based on cache occurs even | though the caching decision was based | on the old memslots> | ... | <action *continues* to occur until next | memslot generation change, which may | be never> | | By incrementing the generation after synchronizing with kvm->srcu readers, we ensure that the generation retrieved in (6) will become invalid soon after (8). Keeping the existing increment is not strictly necessary, but we do keep it and just move it for consistency from update_memslots to install_new_memslots. It invalidates old cached MMIOs immediately, instead of having to wait for the end of synchronize_srcu_expedited, which makes the code more clearly correct in case CPU 1 is preempted right after synchronize_srcu() returns. To avoid halving the generation space in SPTEs, always presume that the low bit of the generation is zero when reconstructing a generation number out of an SPTE. This effectively disables MMIO caching in SPTEs during the call to synchronize_srcu_expedited. Using the low bit this way is somewhat like a seqcount---where the protected thing is a cache, and instead of retrying we can simply punt if we observe the low bit to be 1. Signed-off-by:
-
David Matlack authored
commit 56f17dd3 upstream. The following events can lead to an incorrect KVM_EXIT_MMIO bubbling up to userspace: (1) Guest accesses gpa X without a memory slot. The gfn is cached in struct kvm_vcpu_arch (mmio_gfn). On Intel EPT-enabled hosts, KVM sets the SPTE write-execute-noread so that future accesses cause EPT_MISCONFIGs. (2) Host userspace creates a memory slot via KVM_SET_USER_MEMORY_REGION covering the page just accessed. (3) Guest attempts to read or write to gpa X again. On Intel, this generates an EPT_MISCONFIG. The memory slot generation number that was incremented in (2) would normally take care of this but we fast path mmio faults through quickly_check_mmio_pf(), which only checks the per-vcpu mmio cache. Since we hit the cache, KVM passes a KVM_EXIT_MMIO up to userspace. This patch fixes the issue by using the memslot generation number to validate the mmio cache. Signed-off-by:
-
Josef Ahmad authored
commit bb048713 upstream. This patch adds the PCI id for Intel Quark ILB. It will be used for GPIO and Multifunction device driver. Signed-off-by:
Josef Ahmad <josef.ahmad@intel.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by:
-
Bryan O'Donoghue authored
commit a68df706 upstream. This patch is to enable the USB gadget device for Intel Quark X1000 Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by:
Bing Niu <bing.niu@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Andy Lutomirski authored
commit a1480dcc upstream. Accessing do_remount_sb should require global CAP_SYS_ADMIN, but only one of the two call sites was appropriately protected. Fixes CVE-2014-7975. Signed-off-by:
-
