- 10 Oct, 2014 40 commits
-
-
Russell King authored
The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } pci_using_dac = 0; } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by:Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> (cherry picked from commit f5f2eda8) Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Vladimir Davydov authored
On e1000_down(), we should ensure every asynchronous work is canceled before proceeding. Since the watchdog_task can schedule other works apart from itself, it should be stopped first, but currently it is stopped after the reset_task. This can result in the following race leading to the reset_task running after the module unload: e1000_down_and_stop(): e1000_watchdog(): ---------------------- ----------------- cancel_work_sync(reset_task) schedule_work(reset_task) cancel_delayed_work_sync(watchdog_task) The patch moves cancel_delayed_work_sync(watchdog_task) at the beginning of e1000_down_and_stop() thus ensuring the race is impossible. Cc: Tushar Dave <tushar.n.dave@intel.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
yzhu1 authored
This change is based on a similar change made to e1000e support in commit bb9e44d0 ("e1000e: prevent oops when adapter is being closed and reset simultaneously"). The same issue has also been observed on the older e1000 cards. Here, we have increased the RESET_COUNT value to 50 because there are too many accesses to e1000 nic on stress tests to e1000 nic, it is not enough to set RESET_COUT 25. Experimentation has shown that it is enough to set RESET_COUNT 50. Signed-off-by:
yzhu1 <yanjun.zhu@windriver.com> Tested-by:
-
Hong Zhiguo authored
tx_ring and adapter->tx_ring are already of type "struct e1000_tx_ring *" Signed-off-by:
Hong Zhiguo <zhiguohong@tencent.com> Tested-by:
-
Mika Westerberg authored
Commit 7509963c (e1000e: Fix a compile flag mis-match for suspend/resume) moved suspend and resume hooks to be available when CONFIG_PM is set. However, it can be set even if CONFIG_PM_SLEEP is not set causing following warnings to be emitted: drivers/net/ethernet/intel/e1000e/netdev.c:6178:12: warning: ‘e1000_suspend’ defined but not used [-Wunused-function] drivers/net/ethernet/intel/e1000e/netdev.c:6185:12: warning: ‘e1000_resume’ defined but not used [-Wunused-function] To fix this make the hooks to be available only when CONFIG_PM_SLEEP is set and remove CONFIG_PM wrapping from driver ops because this is already handled by SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS(). Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Dave Ertman <davidx.m.ertman@intel.com> Cc: Aaron Brown <aaron.f.brown@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (cherry picked from commit 38a529b5) Signed-off-by:
-
David Ertman authored
This patch addresses a mis-match between the declaration and usage of the e1000_suspend and e1000_resume functions. Previously, these functions were declared in a CONFIG_PM_SLEEP wrapper, and then utilized within a CONFIG_PM wrapper. Both the declaration and usage will now be contained within CONFIG_PM wrappers. Signed-off-by:
Dave Ertman <davidx.m.ertman@intel.com> Tested-by:
-
Russell King authored
Provide a helper to set both the DMA and coherent DMA masks to the same value - this avoids duplicated code in a number of drivers, sometimes with buggy error handling, and also allows us identify which drivers do things differently. Signed-off-by:
-
Keith Packard authored
When FB_EVENT_FB_UNBIND is sent, fbcon has two paths, one path taken when there is another frame buffer to switch any affected vcs to and another path when there isn't. In the case where there is another frame buffer to use, fbcon_fb_unbind calls set_con2fb_map to remap all of the affected vcs to the replacement frame buffer. set_con2fb_map will eventually call con2fb_release_oldinfo when the last vcs gets unmapped from the old frame buffer. con2fb_release_oldinfo frees the fbcon data that is hooked off of the fb_info structure, including the cursor timer. In the case where there isn't another frame buffer to use, fbcon_fb_unbind simply calls fbcon_unbind, which doesn't clear the con2fb_map or free the fbcon data hooked from the fb_info structure. In particular, it doesn't stop the cursor blink timer. When the fb_info structure is then freed, we end up with a timer queue pointing into freed memory and "bad things" start happening. This patch first changes con2fb_release_oldinfo so that it can take a NULL pointer for the new frame buffer, but still does all of the deallocation and cursor timer cleanup. Finally, the patch tries to replicate some of what set_con2fb_map does by clearing the con2fb_map for the affected vcs and calling the modified con2fb_release_info function to clean up the fb_info structure. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> (cherry picked from commit 5f4dc28b) Signed-off-by:
-
Cedric Le Goater authored
The "screen" properties : depth, width, height, linebytes need to be converted to the host endian order when read from the device tree. The offb_init_palette_hacks() routine also made assumption on the host endian order. Signed-off-by:
Cédric Le Goater <clg@fr.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> (cherry picked from commit 212c0cbd) Signed-off-by:
-
Naoya Horiguchi authored
Commit 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry") changed the order of huge_ptep_set_wrprotect() and huge_ptep_get(), which leads to breakage in some workloads like hugepage-backed heap allocation via libhugetlbfs. This patch fixes it. The test program for the problem is shown below: $ cat heap.c #include <unistd.h> #include <stdlib.h> #include <string.h> #define HPS 0x200000 int main() { int i; char *p = malloc(HPS); memset(p, '1', HPS); for (i = 0; i < 5; i++) { if (!fork()) { memset(p, '2', HPS); p = malloc(HPS); memset(p, '3', HPS); free(p); return 0; } } sleep(1); free(p); return 0; } $ export HUGETLB_MORECORE=yes ; export HUGETLB_NO_PREFAULT= ; hugectl --heap ./heap Fixes 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry"), so is applicable to -stable kernels which include it. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by:
Guillaume Morin <guillaume@morinfr.org> Suggested-by:
Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [2.6.37+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit 0253d634) Signed-off-by:
-
Naoya Horiguchi authored
There's a race between fork() and hugepage migration, as a result we try to "dereference" a swap entry as a normal pte, causing kernel panic. The cause of the problem is that copy_hugetlb_page_range() can't handle "swap entry" family (migration entry and hwpoisoned entry) so let's fix it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
H. Peter Anvin authored
Make espfix64 a hidden Kconfig option. This fixes the x86-64 UML build which had broken due to the non-existence of init_espfix_bsp() in UML: since UML uses its own Kconfig, this option does not appear in the UML build. This also makes it possible to make support for 16-bit segments a configuration option, for the people who want to minimize the size of the kernel. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Richard Weinberger <richard@nod.at> Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com (cherry picked from commit 197725de) Signed-off-by:
-
Greg Thelen authored
1d3d4437 ("vmscan: per-node deferred work") added a flags field to struct shrinker assuming that all shrinkers were zero filled. The dm bufio shrinker is not zero filled, which leaves arbitrary kmalloc() data in flags. So far the only defined flags bit is SHRINKER_NUMA_AWARE. But there are proposed patches which add other bits to shrinker.flags (e.g. memcg awareness). Rather than simply initializing the shrinker, this patch uses kzalloc() when allocating the dm_bufio_client to ensure that the embedded shrinker and any other similar structures are zeroed. This fixes theoretical over aggressive shrinking of dm bufio objects. If the uninitialized dm_bufio_client.shrinker.flags contains SHRINKER_NUMA_AWARE then shrink_slab() would call the dm shrinker for each numa node rather than just once. This has been broken since 3.12. Signed-off-by:
Greg Thelen <gthelen@google.com> Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.12+ (cherry picked from commit d8c712ea) Signed-off-by:
-
Michal Hocko authored
Paul Furtado has reported the following GPF: general protection fault: 0000 [#1] SMP Modules linked in: ipv6 dm_mod xen_netfront coretemp hwmon x86_pkg_temp_thermal crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul glue_helper aes_x86_64 microcode pcspkr ext4 jbd2 mbcache raid0 xen_blkfront CPU: 3 PID: 3062 Comm: java Not tainted 3.16.0-rc5 #1 task: ffff8801cfe8f170 ti: ffff8801d2ec4000 task.ti: ffff8801d2ec4000 RIP: e030:mem_cgroup_oom_synchronize+0x140/0x240 RSP: e02b:ffff8801d2ec7d48 EFLAGS: 00010283 RAX: 0000000000000001 RBX: ffff88009d633800 RCX: 000000000000000e RDX: fffffffffffffffe RSI: ffff88009d630200 RDI: ffff88009d630200 RBP: ffff8801d2ec7da8 R08: 0000000000000012 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: ffff88009d633800 R13: ffff8801d2ec7d48 R14: dead000000100100 R15: ffff88009d633a30 FS: 00007f1748bb4700(0000) GS:ffff8801def80000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f4110300308 CR3: 00000000c05f7000 CR4: 0000000000002660 Call Trace: pagefault_out_of_memory+0x18/0x90 mm_fault_error+0xa9/0x1a0 __do_page_fault+0x478/0x4c0 do_page_fault+0x2c/0x40 page_fault+0x28/0x30 Code: 44 00 00 48 89 df e8 40 ca ff ff 48 85 c0 49 89 c4 74 35 4c 8b b0 30 02 00 00 4c 8d b8 30 02 00 00 4d 39 fe 74 1b 0f 1f 44 00 00 <49> 8b 7e 10 be 01 00 00 00 e8 42 d2 04 00 4d 8b 36 4d 39 fe 75 RIP mem_cgroup_oom_synchronize+0x140/0x240 Commit fb2a6fc5 ("mm: memcg: rework and document OOM waiting and wakeup") has moved mem_cgroup_oom_notify outside of memcg_oom_lock assuming it is protected by the hierarchical OOM-lock. Although this is true for the notification part the protection doesn't cover unregistration of event which can happen in parallel now so mem_cgroup_oom_notify can see already unlinked and/or freed mem_cgroup_eventfd_list. Fix this by using memcg_oom_lock also in mem_cgroup_oom_notify. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=80881 Fixes: fb2a6fc5 (mm: memcg: rework and document OOM waiting and wakeup) Signed-off-by:Michal Hocko <mhocko@suse.cz> Reported-by:
Paul Furtado <paulfurtado91@gmail.com> Tested-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
-
Mateusz Guzik authored
proc_sched_show_task() does: if (nr_switches) do_div(avg_atom, nr_switches); nr_switches is unsigned long and do_div truncates it to 32 bits, which means it can test non-zero on e.g. x86-64 and be truncated to zero for division. Fix the problem by using div64_ul() instead. As a side effect calculations of avg_atom for big nr_switches are now correct. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1402750809-31991-1-git-send-email-mguzik@redhat.comSigned-off-by:
-
Mike Snitzer authored
The block size for the thin-pool's data device must remained fixed for the life of the thin-pool. Disallow any attempt to change the thin-pool's data block size. It should be noted that attempting to change the data block size via thin-pool table reload will be ignored as a side-effect of the thin-pool handover that the thin-pool target does during thin-pool table reload. Here is an example outcome of attempting to load a thin-pool table that reduced the thin-pool's data block size from 1024K to 512K. Before: kernel: device-mapper: thin: 253:4: growing the data device from 204800 to 409600 blocks After: kernel: device-mapper: thin metadata: changing the data block size (from 2048 to 1024) is not supported kernel: device-mapper: table: 253:4: thin-pool: Error creating metadata object kernel: device-mapper: ioctl: error adding target to table Signed-off-by:
Joe Thornber <ejt@redhat.com> Cc: stable@vger.kernel.org (cherry picked from commit 9aec8629) Signed-off-by:
-
Alex Deucher authored
If the value in the scratch register is 0, set it to the max level. This fixes an issue where the console fb blanking code calls back into the backlight driver on unblank and then sets the backlight level to 0 after the driver has already set the mode and enabled the backlight. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=81382 https://bugs.freedesktop.org/show_bug.cgi?id=70207Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Tested-by:
David Heidelberger <david.heidelberger@ixit.cz> Cc: stable@vger.kernel.org (cherry picked from commit 201bb624) Signed-off-by:
-
Thomas Petazzoni authored
As reported by Maggie Mae Roxas, the mvneta driver doesn't behave properly in 10 Mbit/s mode. This is due to a misconfiguration of the MVNETA_GMAC_AUTONEG_CONFIG register: bit MVNETA_GMAC_CONFIG_MII_SPEED must be set for a 100 Mbit/s speed, but cleared for a 10 Mbit/s speed, which the driver was not properly doing. This commit adjusts that by setting the MVNETA_GMAC_CONFIG_MII_SPEED bit only in 100 Mbit/s mode, and relying on the fact that all the speed related bits of this register are cleared at the beginning of the mvneta_adjust_link() function. This problem exists since c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") which is the commit that introduced the mvneta driver in the kernel. Cc: <stable@vger.kernel.org> # v3.8+ Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Reported-by:
Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Cc: Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Yuchung Cheng authored
The undo code assumes that, upon entering loss recovery, TCP 1) always retransmit something 2) the retransmission never fails locally (e.g., qdisc drop) so undo_marker is set in tcp_enter_recovery() and undo_retrans is incremented only when tcp_retransmit_skb() is successful. When the assumption is broken because TCP's cwnd is too small to retransmit or the retransmit fails locally. The next (DUP)ACK would incorrectly revert the cwnd and the congestion state in tcp_try_undo_dsack() or tcp_may_undo(). Subsequent (DUP)ACKs may enter the recovery state. The sender repeatedly enter and (incorrectly) exit recovery states if the retransmits continue to fail locally while receiving (DUP)ACKs. The fix is to initialize undo_retrans to -1 and start counting on the first retransmission. Always increment undo_retrans even if the retransmissions fail locally because they couldn't cause DSACKs to undo the cwnd reduction. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Loic Prylli authored
A bug was introduced in NETDEV_CHANGE notifier sequence causing the arp table to be sometimes spuriously cleared (including manual arp entries marked permanent), upon network link carrier changes. The changed argument for the notifier was applied only to a single caller of NETDEV_CHANGE, missing among others netdev_state_change(). So upon net_carrier events induced by the network, which are triggering a call to netdev_state_change(), arp_netdev_event() would decide whether to clear or not arp cache based on random/junk stack values (a kind of read buffer overflow). Fixes: be9efd36 ("net: pass changed flags along with NETDEV_CHANGE event") Fixes: 6c8b4e3f ("arp: flush arp cache on IFF_NOARP change") Signed-off-by:
Loic Prylli <loicp@google.com> Signed-off-by:
-
Bernd Wachter authored
There's a new version of the Telewell 4G modem working with, but not recognized by this driver. Signed-off-by:
Bernd Wachter <bernd.wachter@jolla.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Edward Allcutt authored
Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by:
Edward Allcutt <edward.allcutt@openmarket.com> Signed-off-by:
-
Christoph Paasch authored
When in repair-mode and TCP_RECV_QUEUE is set, we end up calling tcp_push with mss_now being 0. If data is in the send-queue and tcp_set_skb_tso_segs gets called, we crash because it will divide by mss_now: [ 347.151939] divide error: 0000 [#1] SMP [ 347.152907] Modules linked in: [ 347.152907] CPU: 1 PID: 1123 Comm: packetdrill Not tainted 3.16.0-rc2 #4 [ 347.152907] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 347.152907] task: f5b88540 ti: f3c82000 task.ti: f3c82000 [ 347.152907] EIP: 0060:[<c1601359>] EFLAGS: 00210246 CPU: 1 [ 347.152907] EIP is at tcp_set_skb_tso_segs+0x49/0xa0 [ 347.152907] EAX: 00000b67 EBX: f5acd080 ECX: 00000000 EDX: 00000000 [ 347.152907] ESI: f5a28f40 EDI: f3c88f00 EBP: f3c83d10 ESP: f3c83d00 [ 347.152907] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 347.152907] CR0: 80050033 CR2: 083158b0 CR3: 35146000 CR4: 000006b0 [ 347.152907] Stack: [ 347.152907] c167f9d9 f5acd080 000005b4 00000002 f3c83d20 c16013e6 f3c88f00 f5acd080 [ 347.152907] f3c83da0 c1603b5a f3c83d38 c10a0188 00000000 00000000 f3c83d84 c10acc85 [ 347.152907] c1ad5ec0 00000000 00000000 c1ad679c 010003e0 00000000 00000000 f3c88fc8 [ 347.152907] Call Trace: [ 347.152907] [<c167f9d9>] ? apic_timer_interrupt+0x2d/0x34 [ 347.152907] [<c16013e6>] tcp_init_tso_segs+0x36/0x50 [ 347.152907] [<c1603b5a>] tcp_write_xmit+0x7a/0xbf0 [ 347.152907] [<c10a0188>] ? up+0x28/0x40 [ 347.152907] [<c10acc85>] ? console_unlock+0x295/0x480 [ 347.152907] [<c10ad24f>] ? vprintk_emit+0x1ef/0x4b0 [ 347.152907] [<c1605716>] __tcp_push_pending_frames+0x36/0xd0 [ 347.152907] [<c15f4860>] tcp_push+0xf0/0x120 [ 347.152907] [<c15f7641>] tcp_sendmsg+0xf1/0xbf0 [ 347.152907] [<c116d920>] ? kmem_cache_free+0xf0/0x120 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c114f0f0>] ? do_wp_page+0x3e0/0x850 [ 347.152907] [<c161c36a>] inet_sendmsg+0x4a/0xb0 [ 347.152907] [<c1150269>] ? handle_mm_fault+0x709/0xfb0 [ 347.152907] [<c15a006b>] sock_aio_write+0xbb/0xd0 [ 347.152907] [<c1180b79>] do_sync_write+0x69/0xa0 [ 347.152907] [<c1181023>] vfs_write+0x123/0x160 [ 347.152907] [<c1181d55>] SyS_write+0x55/0xb0 [ 347.152907] [<c167f0d8>] sysenter_do_call+0x12/0x28 This can easily be reproduced with the following packetdrill-script (the "magic" with netem, sk_pacing and limit_output_bytes is done to prevent the kernel from pushing all segments, because hitting the limit without doing this is not so easy with packetdrill): 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +0.1 < . 1:1(0) ack 1 win 65000 +0 accept(3, ..., ...) = 4 // This forces that not all segments of the snd-queue will be pushed +0 `tc qdisc add dev tun0 root netem delay 10ms` +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=2` +0 setsockopt(4, SOL_SOCKET, 47, [2], 4) = 0 +0 write(4,...,10000) = 10000 +0 write(4,...,10000) = 10000 // Set tcp-repair stuff, particularly TCP_RECV_QUEUE +0 setsockopt(4, SOL_TCP, 19, [1], 4) = 0 +0 setsockopt(4, SOL_TCP, 20, [1], 4) = 0 // This now will make the write push the remaining segments +0 setsockopt(4, SOL_SOCKET, 47, [20000], 4) = 0 +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=130000` // Now we will crash +0 write(4,...,1000) = 1000 This happens since ec342325 (tcp: fix retransmission in repair mode). Prior to that, the call to tcp_push was prevented by a check for tp->repair. The patch fixes it, by adding the new goto-label out_nopush. When exiting tcp_sendmsg and a push is not required, which is the case for tp->repair, we go to this label. When repairing and calling send() with TCP_RECV_QUEUE, the data is actually put in the receive-queue. So, no push is required because no data has been added to the send-queue. Cc: Andrew Vagin <avagin@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Fixes: ec342325 (tcp: fix retransmission in repair mode) Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by:
Andrew Vagin <avagin@openvz.org> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Eric Dumazet authored
While it is legal to kfree(NULL), it is not wise to use : put_page(virt_to_head_page(NULL)) BUG: unable to handle kernel paging request at ffffeba400000000 IP: [<ffffffffc01f5928>] virt_to_head_page+0x36/0x44 [bnx2x] Reported-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Fixes: d46d132c ("bnx2x: use netdev_alloc_frag()") Signed-off-by:
-
Eric Dumazet authored
sk_dst_cache has __rcu annotation, so we need a cast to avoid following sparse error : include/net/sock.h:1774:19: warning: incorrect type in initializer (different address spaces) include/net/sock.h:1774:19: expected struct dst_entry [noderef] <asn:4>*__ret include/net/sock.h:1774:19: got struct dst_entry *dst Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: 7f502361 ("ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fix") Signed-off-by:
Madalin-Cristian Bucur <madalin.bucur@freescale.com> Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Jeff Mahoney <jeffm@suse.com> Fixes: 86f6cf41 (net: of_mdio: add of_mdiobus_link_phydev()) Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> mwifiex: fix Tx timeout issue https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Cc: <stable@vger.kernel.org> Reported-by:
Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by:
Linus Gasser <list@markas-al-nour.org> Reported-by:
Michael Hirsch <hirsch@teufel.de> Tested-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Maithili Hinge <maithili@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> iwlwifi: update the 7265 series HW IDs Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. CC: <stable@vger.kernel.org> [3.13+] Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> iwlwifi: mvm: rework sched scan channel configuration The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org cfg80211: fix elapsed_jiffies calculation MAX_JIFFY_OFFSET has no meaning when calculating the elapsed jiffies, as jiffies run out until ULONG_MAX. This miscalculation results in erroneous values in case of a wrap-around. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Max Stepanov <Max.Stepanov@intel.com> Signed-off-by:
Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Cc: stable@vger.kernel.org # 3.15.x ath10k: fix 8th virtual AP interface with DFS Firmware 10.x supports up to 8 virtual AP interfaces, but in a DFS channel it was possible to create only 7 interfaces as ath10k internal creates a monitor interface for DFS. Previous vdev map initialization was missing enough space for 8 + 1 vdevs due to wrong define used and that's why there was no space for 8th interface. Use the correct define TARGET_10X_NUM_VDEVS with 10.x firmware to make it possible to create the 8th virtual interface. Signed-off-by:
Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> ath10k: remove unnecessary htt rx corruption check While fixing a bug reported by Avery I went ahead and added a warning suspecting there might be something more to the bug. This ended up with people reporting they see warnings during heavy traffic. This bought me some time and helped me understand the problem better - apparently fw/hw can report a chained msdus as follows: 1 msdu, 1 chained, 1 msdu (0 length). The patch removes the extra check but leaves the other change that fixed the original skb_push panic bug (msdu_chaining was overwritten in an unfortunate way which made the above example to be treated as non-chained case). Reported-by:
Yeoh Chun-Yeow <yeohchunyeow@gmail.com> Reported-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Eric Dumazet authored
When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by:
Dormando <dormando@rydia.net> Signed-off-by:
-
Daniel Borkmann authored
When writing to the sysctl field net.sctp.auth_enable, it can well be that the user buffer we handed over to proc_dointvec() via proc_sctp_do_auth() handler contains something other than integers. In that case, we would set an uninitialized 4-byte value from the stack to net->sctp.auth_enable that can be leaked back when reading the sysctl variable, and it can unintentionally turn auth_enable on/off based on the stack content since auth_enable is interpreted as a boolean. Fix it up by making sure proc_dointvec() returned sucessfully. Fixes: b14878cc ("net: sctp: cache auth_enable per endpoint") Reported-by:
Florian Westphal <fwestpha@redhat.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 43d826ca upstream. We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> (cherry picked from commit 3a0722dd)
-
Axel Lin authored
Dashes are not allowed in hwmon name attributes. Use "da9052" instead of "da9052-hwmon". Signed-off-by:
Axel Lin <axel.lin@ingics.com> Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> (cherry picked from commit ee14b644) Signed-off-by:
-
Axel Lin authored
Dashes are not allowed in hwmon name attributes. Use "da9055" instead of "da9055-hwmon". Signed-off-by:
-
Miklos Szeredi authored
If the number in "user_id=N" or "group_id=N" mount options was larger than INT_MAX then fuse returned EINVAL. Fix this to handle all valid uid/gid values. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org (cherry picked from commit 233a01fa) Signed-off-by:
-
Loic Poulain authored
When detecting a non-link packet, h5_reset_rx() frees the Rx skb. Not returning after that will cause the upcoming h5_rx_payload() call to dereference a now NULL Rx skb and trigger a kernel oops. Signed-off-by:
-
K. Y. Srinivasan authored
Add code to poll the channel since we process only one message at a time and the host may not interrupt us. Also increase the receive buffer size since some KVP messages are close to 8K bytes in size. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 9bd2d0df) Signed-off-by:
-
Hans de Goede authored
commit 242841d3 upstream. Tested-and-reported-by:
yullaw <yullaw@mageia.cz> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Hugh Dickins authored
shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576 ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by:
-
Hugh Dickins authored
Commit f00cdc6d ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6d and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by:
-
Hugh Dickins authored
Trinity finds that mmap access to a hole while it's punched from shmem can prevent the madvise(MADV_REMOVE) or fallocate(FALLOC_FL_PUNCH_HOLE) from completing, until the reader chooses to stop; with the puncher's hold on i_mutex locking out all other writers until it can complete. It appears that the tmpfs fault path is too light in comparison with its hole-punching path, lacking an i_data_sem to obstruct it; but we don't want to slow down the common case. Extend shmem_fallocate()'s existing range notification mechanism, so shmem_fault() can refrain from faulting pages into the hole while it's punched, waiting instead on i_mutex (when safe to sleep; or repeatedly faulting when not). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Andy Whitcroft authored
The recently merged change (in v3.14-rc6) to ACPI resource detection (below) causes all zero length ACPI resources to be elided from the table: commit b355cee8 Author: Zhang Rui <rui.zhang@intel.com> Date: Thu Feb 27 11:37:15 2014 +0800 ACPI / resources: ignore invalid ACPI device resources This change has caused a regression in (at least) serial port detection for a number of machines (see LP#1313981 [1]). These seem to represent their IO regions (presumably incorrectly) as a zero length region. Reverting the above commit restores these serial devices. Only elide zero length resources which lie at address 0. Fixes: b355cee8 (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Zhang Rui <rui.zhang@intel.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> (cherry picked from commit 867f9d46) Signed-off-by:
-
Thomas Gleixner authored
The rx_poll code has the following gem: if (msg_ctrl_save & IF_MCONT_EOB) return num_rx_pkts; The EOB bit is the indicator for the hardware that this is the last configured FIFO object. But this object can contain valid data, if we manage to free up objects before the overrun case hits. Now if the code exits due to the EOB bit set, then this buffer is stale and the interrupt bit and NewDat bit of the buffer are still set. Results in a nice interrupt storm unless we come into an overrun situation where the MSGLST bit gets set. ksoftirqd/0-3 [000] ..s. 79.124101: c_can_poll: rx_poll: val: 00008001 pend 00008001 ksoftirqd/0-3 [000] ..s. 79.124176: c_can_poll: rx_poll: val: 00008000 pend 00008000 ksoftirqd/0-3 [000] ..s. 79.124187: c_can_poll: rx_poll: val: 00008002 pend 00008002 ksoftirqd/0-3 [000] ..s. 79.124256: c_can_poll: rx_poll: val: 00008000 pend 00008000 ksoftirqd/0-3 [000] ..s. 79.124267: c_can_poll: rx_poll: val: 00008000 pend 00008000 The amazing thing is that the check of the MSGLST (aka overrun bit) used to be after the check of the EOB bit. That was "fixed" in commit 5d0f801a(can: c_can: Fix RX message handling, handle lost message before EOB). But the author of this "fix" did not even understand that the EOB check is broken as well. Again a simple solution: Remove Signed-off-by:Thomas Gleixner <tglx@linutronix.de> [mkl: adjusted subject and commit message] Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> (cherry picked from commit 710c5610) Signed-off-by:
-
Christoph Lameter authored
Seems to be called with preemption enabled. Therefore it must use mod_zone_page_state instead. Signed-off-by:
Christoph Lameter <cl@linux.com> Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
-
