- 24 Jan, 2024 10 commits
-
-
James Clark authored
Even though this is a frame pointer unwind test, it's testing that a frame pointer stack can be augmented correctly with a partial Dwarf unwind. So add a feature check so that this test skips instead of fails if Dwarf unwinding isn't present. Signed-off-by:
James Clark <james.clark@arm.com> Reviewed-by:
Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Spoorthy S <spoorts2@in.ibm.com> Cc: Kajol Jain <kjain@linux.ibm.com> Link: https://lore.kernel.org/r/20240123163903.350306-3-james.clark@arm.comSigned-off-by:
Namhyung Kim <namhyung@kernel.org>
-
James Clark authored
Even though unwinding depends on either HAVE_DWARF_SUPPORT or HAVE_LIBUNWIND, scripts testing unwinding can't just look for the existence of either of those flags. This is because NO_LIBDW_DWARF_UNWIND=1 can disable unwinding with libdw, but libdw will still be linked leaving HAVE_DWARF_SUPPORT turned on. Presumably because it is used for things other than unwinding, so I don't think this needs to be fixed. HAVE_DWARF_UNWIND_SUPPORT already takes the combination of all those things into account, and is used to gate the built in tests like "Test dwarf unwind", so add it to the feature list output so that it can be used by the script tests too. Signed-off-by:
-
James Clark authored
The 'Session topology' test currently fails with this message when evlist__new_default() opens more than one event: 32: Session topology : --- start --- templ file: /tmp/perf-test-vv5YzZ Using CPUID 0x00000000410fd070 Opening: unknown-hardware:HG ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xb00000000 disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4 Opening: unknown-hardware:HG ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5 non matching sample_type FAILED tests/topology.c:73 can't get session ---- end ---- Session topology: FAILED! This is because when re-opening the file and parsing the header, Perf expects that any file that has more than one event has the sample ID flag set. Perf record already sets the flag in a similar way when there is more than one event, so add the same logic to evlist__new_default(). evlist__new_default() is only currently used in tests, so I don't expect this change to have any other side effects. The other tests that use it don't save and re-open the file so don't hit this issue. The session topology test has been failing on Arm big.LITTLE platforms since commit 251aa040 ("perf parse-events: Wildcard most "numeric" events") when evlist__new_default() started opening multiple events for 'cycles'. Fixes: 251aa040 ("perf parse-events: Wildcard most "numeric" events") Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/Tested-by:Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Kan Liang authored
The number of mem PMUs can be calculated by searching the perf_pmus__scan_mem(). Remove the ARCH specific perf_pmus__num_mem_pmus() Tested-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Kan Liang authored
The current code iterates all memory PMUs. It doesn't matter if the system has only one memory PMU or multiple PMUs. The check of perf_pmus__num_mem_pmus() is not required anymore. The rec_tmp is not used in c2c and mem. Removing them as well. Suggested-by:
-
Kan Liang authored
The aux_event can be retrieved from the perf_pmu now. Implement a generic support. Reviewed-by:
Ravi Bangoria <ravi.bangoria@amd.com> Tested-by:
-
Kan Liang authored
For some ARCHs, e.g., ARM and AMD, to get the availability of the mem-events, perf checks the existence of a specific PMU. For the other ARCHs, e.g., Intel and Power, perf has to check the existence of some specific events. The current perf only iterates the mem-events-supported PMUs. It's not required to check the existence of a specific PMU anymore. Rename sysfs_name to event_name, which stores the specific mem-events. Perf only needs to check those events for the availability of the mem-events. Rename perf_mem_event__supported to perf_pmu__mem_events_supported. Reviewed-by:
-
Kan Liang authored
Introduce a generic perf_mem_events__name(). Remove the ARCH-specific one. The mem_load events may have a different format. Add ldlat and aux_event in the struct perf_mem_event to indicate the format and the extra aux event. Add perf_mem_events_intel_aux[] to support the extra mem_load_aux event. Rename perf_mem_events__name to perf_pmu__mem_events_name. Reviewed-by:
-
Kan Liang authored
The mem_events can be retrieved from the struct perf_pmu now. An ARCH specific perf_mem_events__ptr() is not required anymore. Remove all of them. The Intel hybrid has multiple mem-events-supported PMUs. But they share the same mem_events. Other ARCHs only support one mem-events-supported PMU. In the configuration, it's good enough to only configure the mem_events for one PMU. Add perf_mem_events_find_pmu() which returns the first mem-events-supported PMU. In the perf_mem_events__init(), the perf_pmus__scan() is not required anymore. It avoids checking the sysfs for every PMU on the system. Make the perf_mem_events__record_args() more generic. Remove the perf_mem_events__print_unsupport_hybrid(). Since pmu is added as a new parameter, rename perf_mem_events__ptr() to perf_pmu__mem_events_ptr(). Several other functions also do a similar rename. Reviewed-by:
Kajol Jain <kjain@linux.ibm.com> Tested-by:
-
Kan Liang authored
With the mem_events, perf doesn't need to read sysfs for each PMU to find the mem-events-supported PMU. The patch also makes it possible to clean up the related __weak functions later. The patch is only to add the mem_events into the perf_pmu for all ARCHs. It will be used in the later cleanup patches. Reviewed-by:
-
- 23 Jan, 2024 4 commits
-
-
Ze Gao authored
Now that we have evsel__taskstate() which no longer relies on the hardcoded task state string and has good backward compatibility, we have a good reason to use it. Note TASK_STATE_TO_CHAR_STR and task bitmasks are useless now so we remove them for good. And now we pass the state info back and forth in a symbolic char which explains itself well instead. Signed-off-by:
Ze Gao <zegao@tencent.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20240123022425.1611483-1-zegao@tencent.comSigned-off-by:
-
Ze Gao authored
Now that we have the __prinf_flags() parsing routines, we add a new helper evsel__taskstate() to extract the task state info from the recorded data. Signed-off-by:
-
Ze Gao authored
Perf uses a hard coded string "RSDTtXZPI" to index the sched_switch prev_state field raw bitmask value. This works well except for when the kernel changes this string, in which case this will break again. Instead we add a new way to parse task state string from tracepoint print format already recorded by perf, which eliminates the further dependencies with this hardcode and unmaintainable macro, and this is exactly what libtraceevent[1] does for now. So we borrow the print flags parsing logic from libtraceevent[1]. And in get_states(), we walk the print arguments until the __print_flags() for the target state field is found, and use that to build the states string for future parsing. [1]: https://lore.kernel.org/linux-trace-devel/20231224140732.7d41698d@rorschach.local.home/Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Ze Gao authored
Update state char array to match the latest kernel definitions and remove unused state mapping macros. Note this is the preparing patch for get rid of the way to parse process state from raw bitmask value. Instead we are going to parse it from the recorded tracepoint print format, and this change marks why we're doing it. Signed-off-by:
-
- 22 Jan, 2024 14 commits
-
-
Yang Jihong authored
Minor code style alignment cleanup for perf_data__switch() and perf_data__write(). No functional change. Signed-off-by:
Yang Jihong <yangjihong1@huawei.com> Acked-by:
-
Yang Jihong authored
In pipe mode, no need to switch perf data output, therefore, '--timestamp-filename' option should not take effect. Check the conflict before recording and output WARNING. In this case, the check pipe mode in perf_data__switch() can be removed. Before: # perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1 # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Dump -.2024011812110182 ] # # Total Lost Samples: 0 # # Samples: 4K of event 'cycles:P' # Event count (approx.): 2176784359 # # Overhead Command Shared Object Symbol # ........ ....... .................... ...................................... # 97.83% perf perf [.] noploop # # (Tip: Print event counts in CSV format with: perf stat -x,) # After: # perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1 WARNING: --timestamp-filename option is not available in pipe mode. # To display the perf.data header info, please use --header/--header-only options. # [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # # Total Lost Samples: 0 # # Samples: 4K of event 'cycles:P' # Event count (approx.): 2185575421 # # Overhead Command Shared Object Symbol # ........ ....... ..................... ............................................. # 97.75% perf perf [.] noploop # # (Tip: Profiling branch (mis)predictions with: perf record -b / perf report) # Fixes: ecfd7a9c ("perf record: Add '--timestamp-filename' option to append timestamp to output file name") Signed-off-by: -
Yang Jihong authored
perf_data__switch() may not assign a legal value to 'new_filename'. In this case, 'new_filename' uses the on-stack value, which may cause a incorrect free and unexpected result. Fixes: 03724b2e ("perf record: Allow to limit number of reported perf.data files") Signed-off-by:
-
Namhyung Kim authored
The DWARF location expression can be fairly complex and it'd be hard to match it with the condition correctly. So let's be conservative and only allow simple expressions. For now it just checks the first operation in the list. The following operations looks ok: * DW_OP_stack_value * DW_OP_deref_size * DW_OP_deref * DW_OP_piece To refuse complex (and unsupported) location expressions, add check_allowed_ops() to compare the rest of the list. It seems earlier result contained those unsupported expressions. For example, I found some local struct variable is placed like below. <2><43d1517>: Abbrev Number: 62 (DW_TAG_variable) <43d1518> DW_AT_location : 15 byte block: 91 50 93 8 91 78 93 4 93 84 8 91 68 93 4 (DW_OP_fbreg: -48; DW_OP_piece: 8; DW_OP_fbreg: -8; DW_OP_piece: 4; DW_OP_piece: 1028; DW_OP_fbreg: -24; DW_OP_piece: 4) Another example is something like this. 0057c8be ffffffffffffffff ffffffff812109f0 (base address) 0057c8ce ffffffff812112b5 ffffffff812112c8 (DW_OP_breg3 (rbx): 0; DW_OP_constu: 18446744073709551612; DW_OP_and; DW_OP_stack_value) It should refuse them. After the change, the stat shows: Annotate data type stats: total 294, ok 158 (53.7%), bad 136 (46.3%) ----------------------------------------------------------- 30 : no_sym 32 : no_mem_ops 53 : no_var 14 : no_typeinfo 7 : bad_offset Acked-by:Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by:
-
Namhyung Kim authored
Local variables are allocated in the stack and the location list should look like base register(s) and an offset. Extend the die_find_variable_by_reg() to handle the following expressions * DW_OP_breg{0..31} * DW_OP_bregx * DW_OP_fbreg Ususally DWARF subprogram entries have frame base information and use it to locate stack variable like below: <2><43d1575>: Abbrev Number: 62 (DW_TAG_variable) <43d1576> DW_AT_location : 2 byte block: 91 7c (DW_OP_fbreg: -4) <--- here <43d1579> DW_AT_name : (indirect string, offset: 0x2c00c9): i <43d157d> DW_AT_decl_file : 1 <43d157e> DW_AT_decl_line : 78 <43d157f> DW_AT_type : <0x43d19d7> I found some differences on saving the frame base between gcc and clang. The gcc uses the CFA to get the base so it needs to check the current frame's CFI info. In this case, stack offset needs to be adjusted from the start of the CFA. <1><1bb8d>: Abbrev Number: 102 (DW_TAG_subprogram) <1bb8e> DW_AT_name : (indirect string, offset: 0x74d41): kernel_init <1bb92> DW_AT_decl_file : 2 <1bb92> DW_AT_decl_line : 1440 <1bb94> DW_AT_decl_column : 18 <1bb95> DW_AT_prototyped : 1 <1bb95> DW_AT_type : <0xcc> <1bb99> DW_AT_low_pc : 0xffffffff81bab9e0 <1bba1> DW_AT_high_pc : 0x1b2 <1bba9> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <------ here <1bbab> DW_AT_call_all_calls: 1 <1bbab> DW_AT_sibling : <0x1bf5a> While clang sets it to a register directly and it can check the register and offset in the instruction directly. <1><43d1542>: Abbrev Number: 60 (DW_TAG_subprogram) <43d1543> DW_AT_low_pc : 0xffffffff816a7c60 <43d154b> DW_AT_high_pc : 0x98 <43d154f> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp)) <---------- here <43d1551> DW_AT_GNU_all_call_sites: 1 <43d1551> DW_AT_name : (indirect string, offset: 0x3bce91): foo <43d1555> DW_AT_decl_file : 1 <43d1556> DW_AT_decl_line : 75 <43d1557> DW_AT_prototyped : 1 <43d1557> DW_AT_type : <0x43c7332> <43d155b> DW_AT_external : 1 Also it needs to update the offset after finding the type like global variables since the offset was from the frame base. Factor out match_var_offset() to check global and local variables in the same way. The type stats are improved too: Annotate data type stats: total 294, ok 160 (54.4%), bad 134 (45.6%) ----------------------------------------------------------- 30 : no_sym 32 : no_mem_ops 51 : no_var 14 : no_typeinfo 7 : bad_offset Reviewed-by: -
Namhyung Kim authored
The die_get_cfa() is to get frame base register and offset at the given instruction address (pc). This info will be used to locate stack variables which have location expression using DW_OP_fbreg. Reviewed-by:
-
Namhyung Kim authored
Global variables are accessed using PC-relative address so it needs to be handled separately. The PC-rel addressing is detected by using DWARF_REG_PC. On x86, %rip register would be used. The address can be calculated using the ip and offset in the instruction. But it should start from the next instruction so add calculate_pcrel_addr() to do it properly. But global variables defined in a different file would only have a declaration which doesn't include a location list. So it first tries to get the type info using the address, and then looks up the variable declarations using name. The name of global variables should be get from the symbol table. The declaration would have the type info. So extend find_var_type() to take both address and name for global variables. The stat is now looks like: Annotate data type stats: total 294, ok 153 (52.0%), bad 141 (48.0%) ----------------------------------------------------------- 30 : no_sym 32 : no_mem_ops 61 : no_var 10 : no_typeinfo 8 : bad_offset Reviewed-by: -
Namhyung Kim authored
Extend find_data_type_die() to find data type from PC-relative address using die_find_variable_by_addr(). Users need to pass the address for the (global) variable. The offset for the variable should be updated after finding the type because the offset in the instruction is just to calcuate the address for the variable. So it changed to pass a pointer to offset and renamed it to 'poffset'. First it searches variables in the CU DIE as it's likely that the global variables are defined in the file level. And then it iterates the scope DIEs to find a local (static) variable. Reviewed-by:
-
Namhyung Kim authored
A typical function prologue and epilogue include multiple stack operations to save and restore the current value of registers. On x86, it looks like below: push r15 push r14 push r13 push r12 ... pop r12 pop r13 pop r14 pop r15 ret As these all touches the stack memory region, chances are high that they appear in a memory profile data. But these are not used for any real purpose yet so it'd return no types. One of my profile type shows that non neglible portion of data came from the stack operations. It also seems GCC generates more stack operations than clang. Annotate Instruction stats total 264, ok 169 (64.0%), bad 95 (36.0%) Name : Good Bad ----------------------------------------------------------- movq : 49 27 movl : 24 9 popq : 0 19 <-- here cmpl : 17 2 addq : 14 1 cmpq : 12 2 cmpxchgl : 3 7 Instead of dealing them as unknown, let's create a seperate pseudo type to represent those stack operations separately. Reviewed-by: -
Namhyung Kim authored
On x86, instructions for array access often looks like below. mov 0x1234(%rax,%rbx,8), %rcx Usually the first register holds the type information and the second one has the index. And the current code only looks up a variable for the first register. But it's possible to be in the other way around so it needs to check the second register if the first one failed. The stat changed like this. Annotate data type stats: total 294, ok 148 (50.3%), bad 146 (49.7%) ----------------------------------------------------------- 30 : no_sym 32 : no_mem_ops 66 : no_var 10 : no_typeinfo 8 : bad_offset Reviewed-by: -
Namhyung Kim authored
When a sample was come from a conditional branch without a memory operand, it could be due to a macro fusion with a previous instruction. So it needs to check the memory operand in the previous one. This improves the stat like below: Annotate data type stats: total 294, ok 147 (50.0%), bad 147 (50.0%) ----------------------------------------------------------- 30 : no_sym 32 : no_mem_ops 71 : no_var 6 : no_typeinfo 8 : bad_offset Reviewed-by: -
Namhyung Kim authored
For the performance reason, I prefer llvm-objdump over GNU's. But I found that llvm-objdump puts x86 lock prefix in a separate line like below. ffffffff81000695: f0 lock ffffffff81000696: ff 83 54 0b 00 00 incl 2900(%rbx) This should be parsed properly, but I just changed to find the insn with next offset for now. This improves the statistics as it can process more instructions. Annotate data type stats: total 294, ok 144 (49.0%), bad 150 (51.0%) ----------------------------------------------------------- 30 : no_sym 35 : no_mem_ops 71 : no_var 6 : no_typeinfo 8 : bad_offset Reviewed-by: -
Yang Jihong authored
If pkg-config is not installed when libtraceevent is linked, the build fails. The error information is as follows: $ make <SNIP> In file included from /home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/evsel.c:43: /home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/trace-event.h:149:62: error: operator '&&' has no right operand 149 | #if defined(LIBTRACEEVENT_VERSION) && LIBTRACEEVENT_VERSION >= MAKE_LIBTRACEEVENT_VERSION(1, 5, 0) | ^~ error: command '/usr/bin/gcc' failed with exit code 1 cp: cannot stat 'python_ext_build/lib/perf*.so': No such file or directory make[2]: *** [Makefile.perf:668: python/perf.cpython-310-x86_64-linux-gnu.so] Error 1 make[2]: *** Waiting for unfinished jobs.... Because pkg-config is not installed, fail to get libtraceevent version in Makefile.config file. As a result, LIBTRACEEVENT_VERSION is empty. However, the preceding error information is not user-friendly. Identify errors in advance by checking that pkg-config is installed at compile time. The build results of various scenarios are as follows: 1. build successful when libtraceevent is not linked and pkg-config is not installed $ pkg-config --version -bash: /usr/bin/pkg-config: No such file or directory $ make clean >/dev/null $ make NO_LIBTRACEEVENT=1 >/dev/null Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory PERF_VERSION = 6.7.rc6.gd988c9f5 $ echo $? 0 2. dummy pkg-config is missing when libtraceevent is linked $ pkg-config --version -bash: /usr/bin/pkg-config: No such file or directory $ make clean >/dev/null $ make >/dev/null Makefile.config:221: *** Error: pkg-config needed by libtraceevent is missing on this system, please install it. Stop. make[1]: *** [Makefile.perf:251: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 $ echo $? 2 3. build successful when libtraceevent is linked and pkg-config is installed $ pkg-config --version 0.29.2 $ make clean >/dev/null $ make >/dev/null Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory PERF_VERSION = 6.7.rc6.gd988c9f5 $ echo $? 0 Signed-off-by: -
Thomas Richter authored
This test case often fails on s390 (about 2 out of 10) because the 10% percent limit on the difference between --bpf-counters event counting and s390 hardware counting is more than 10% in all failure cases. Raise the limit to 20% on s390 and the test case succeeds. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Acked-by:
-
- 21 Jan, 2024 12 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by:
-
