According to HW spec the field "size" should be 16 bits
in bufferx register.

Fixes: e281682b ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Steffen Klassert says:

====================
pull request (net): ipsec 2022-03-09

1) Fix IPv6 PMTU discovery for xfrm interfaces.
   From Lina Wang.

2) Revert failing for policies and states that are
   configured with XFRMA_IF_ID 0. It broke a
   user configuration. From Kai Lueke.

3) Fix a possible buffer overflow in the ESP output path.

4) Fix ESP GSO for tunnel and BEET mode on inter address
   family tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:

===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...

This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.

Fixes: 4e0f718d ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: b7370112 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5a ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-03-08

This series contains updates to iavf, i40e, and ice drivers.

Michal ensures netdev features are properly updated to reflect VLAN
changes received from PF and adds an additional flag for MSI-X
reinitialization as further differentiation of reinitialization
operations is needed for iavf.

Jake stops disabling of VFs due to failed virtchannel responses for
i40e and ice driver.

Dave moves MTU event notification to the service task to prevent issues
with RTNL lock for ice.

Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of
GFP_KERNEL for ice.

Jedrzej fixes the value for link speed comparison which was preventing
the requested value from being set for ice.
---
Note: This will conflict when merging with net-next. Resolution:

diff --cc drivers/net/ethernet/intel/ice/ice.h
index dc42ff92dbad,3121f9b04f59..000000000000
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags
        ICE_FLAG_LEGACY_RX,
        ICE_FLAG_VF_TRUE_PROMISC_ENA,
        ICE_FLAG_MDD_AUTO_RESET_VF,
 +      ICE_FLAG_VF_VLAN_PRUNING,
        ICE_FLAG_LINK_LENIENT_MODE_ENA,
        ICE_FLAG_PLUG_AUX_DEV,
+       ICE_FLAG_MTU_CHANGED,
 +      ICE_FLAG_GNSS,                  /* GNSS successfully initialized */
        ICE_PF_FLAGS_NBITS              /* must be last */
  };
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity  check is done after the message header is accessed to
update some link variables.

This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.

Fixes: 9aa422ad ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.

Fixes: 5cdaaa12 ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.

Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)

Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_misc_intr() is an irq handler. It should not sleep.

Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held.  This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev.  Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.

Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.

This logic was added to the ice driver in commit 1071a835 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit 5c3c48ac ("i40e: implement virtual
device interface").

Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.

The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.

Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.

This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.

In fact, the change from dev_err to dev_info in i40e commit 18b7af57
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.

We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.

Fixes: 1071a835 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.

This logic originates from the early implementation of VF support in
commit 5c3c48ac ("i40e: implement virtual device interface").

That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.

There is no justification for this behavior in the original
implementation. In fact, a later commit 18b7af57 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 01cbf508 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.

That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.

It is clear this check does not make sense, and causes problems which
led to ugly workarounds.

Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.

Fixes: 01cbf508 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes: 5c3c48ac ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED
which should indicate that interrupts need to be completely
reinitialized during reset leads to RTNL deadlocks using ethtool -C
while a reset is in progress.
To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED
used to trigger MSI-X reinit.
New combined setting is fixed adopt after VF reset.
This has been implemented by call reinit interrupt scheme
during VF reset.
Without this fix new combined setting has never been adopted.

Fixes: 209f2f9c ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.

Fixes: 5951a2b9 ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.

Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.ukSigned-off-by: Paolo Abeni <pabeni@redhat.com>

According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.

This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.

This causes the following errors to be shown on reboot, for example:

ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system

Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.

Fixes: a049a30f ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
  garbage or undefined
  ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
                   ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status.  So change the decl to return status.

Fixes: 73390ac9 ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.

This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.

Fixes: c35fe410 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.

Fixes: 384a46ea ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

The maximum message size that can be send is bigger than
the  maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.

Fix this by doing a fallback to COW in that case.

v2:

Avoid get get_order() costs as suggested by Linus Torvalds.

Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skb->len field is read after the packet is sent to the network
stack. In the meantime, skb can be freed. This patch fixes this bug.

Fixes: c3e6b2c3 ("net: lantiq_xrx200: add ingress SG DMA support")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so
its return value should be checked.

Fixes: 1408cc1f ("qed: Introduce VFs")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function dma_set_mask() in setup_hw() can fail, so its return value
should be checked.

Fixes: 1700fe1a ("Add mISDN HFC PCI driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the blamed commit, dsa_tree_setup_master() may exit without
calling rtnl_unlock(), fix that.

Fixes: c146f9bc ("net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown}")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 68ac0f38 because ID
0 was meant to be used for configuring the policy/state without
matching for a specific interface (e.g., Cilium is affected, see
https://github.com/cilium/cilium/pull/18789 and
https://github.com/cilium/cilium/pull/19019).
Signed-off-by: Kai Lueke <kailueke@linux.microsoft.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

dsp_pipeline_build() allocates dup pointer by kstrdup(cfg),
but then it updates dup variable by strsep(&dup, "|").
As a result when it calls kfree(dup), the dup variable contains NULL.

Found by Linux Driver Verification project (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 960366cf ("Add mISDN DSP")
Signed-off-by: David S. Miller <davem@davemloft.net>

This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.

This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).

This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.

Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When enabling a bearer on a node, a kernel panic is observed:

[    4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc]
...
[    4.520030] Call Trace:
[    4.520689]  <IRQ>
[    4.521236]  tipc_link_build_proto_msg+0x375/0x750 [tipc]
[    4.522654]  tipc_link_build_state_msg+0x48/0xc0 [tipc]
[    4.524034]  __tipc_node_link_up+0xd7/0x290 [tipc]
[    4.525292]  tipc_rcv+0x5da/0x730 [tipc]
[    4.526346]  ? __netif_receive_skb_core+0xb7/0xfc0
[    4.527601]  tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[    4.528737]  __netif_receive_skb_list_core+0x20b/0x260
[    4.530068]  netif_receive_skb_list_internal+0x1bf/0x2e0
[    4.531450]  ? dev_gro_receive+0x4c2/0x680
[    4.532512]  napi_complete_done+0x6f/0x180
[    4.533570]  virtnet_poll+0x29c/0x42e [virtio_net]
...

The node in question is receiving activate messages in another
thread after changing bearer status to allow message sending/
receiving in current thread:

         thread 1           |              thread 2
         --------           |              --------
                            |
tipc_enable_bearer()        |
  test_and_set_bit_lock()   |
    tipc_bearer_xmit_skb()  |
                            | tipc_l2_rcv_msg()
                            |   tipc_rcv()
                            |     __tipc_node_link_up()
                            |       tipc_link_build_state_msg()
                            |         tipc_link_build_proto_msg()
                            |           tipc_mon_prep()
                            |           {
                            |             ...
                            |             // null-pointer dereference
                            |             u16 gen = mon->dom_gen;
                            |             ...
                            |           }
  // Not being executed yet |
  tipc_mon_create()         |
  {                         |
    ...                     |
    // allocate             |
    mon = kzalloc();        |
    ...                     |
  }                         |

Monitoring pointer in thread 2 is dereferenced before monitoring data
is allocated in thread 1. This causes kernel panic.

This commit fixes it by allocating the monitoring data before enabling
the bearer to receive messages.

Fixes: 35c55c98 ("tipc: add neighbor monitoring framework")
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.

This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.

Fixes: 02f7a34f ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix regression with processing of MGMT commands
 - Fix unbalanced unlock in Set Device Flags

* tag 'for-net-2022-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: hci_sync: Fix not processing all entries on cmd_sync_work
  Bluetooth: hci_core: Fix unbalanced unlock in set_device_flags()
====================

Link: https://lore.kernel.org/r/20220303210743.314679-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from can, xfrm, wifi, bluetooth, and netfilter.

  Lots of various size fixes, the length of the tag speaks for itself.
  Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
  which had been lagging as you pointed out previously. But there's also
  a larger than we'd like portion of fixes for bugs from previous
  releases.

  Three more fixes still under discussion, including and xfrm revert for
  uAPI error.

  Current release - regressions:

   - iwlwifi: don't advertise TWT support, prevent FW crash

   - xfrm: fix the if_id check in changelink

   - xen/netfront: destroy queues before real_num_tx_queues is zeroed

   - bluetooth: fix not checking MGMT cmd pending queue, make scanning
     work again

  Current release - new code bugs:

   - mptcp: make SIOCOUTQ accurate for fallback socket

   - bluetooth: access skb->len after null check

   - bluetooth: hci_sync: fix not using conn_timeout

   - smc: fix cleanup when register ULP fails

   - dsa: restore error path of dsa_tree_change_tag_proto

   - iwlwifi: fix build error for IWLMEI

   - iwlwifi: mvm: propagate error from request_ownership to the user

  Previous releases - regressions:

   - xfrm: fix pMTU regression when reported pMTU is too small

   - xfrm: fix TCP MSS calculation when pMTU is close to 1280

   - bluetooth: fix bt_skb_sendmmsg not allocating partial chunks

   - ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks

   - ipv6: prevent leaks in igmp6 when input queues get full

   - fix up skbs delta_truesize in UDP GRO frag_list

   - eth: e1000e: fix possible HW unit hang after an s0ix exit

   - eth: e1000e: correct NVM checksum verification flow

   - ptp: ocp: fix large time adjustments

  Previous releases - always broken:

   - tcp: make tcp_read_sock() more robust in presence of urgent data

   - xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate

   - xfrm: fix xfrm_migrate issues when address family changes

   - dcb: flush lingering app table entries for unregistered devices

   - smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error

   - mac80211: fix EAPoL rekey fail in 802.3 rx path

   - mac80211: fix forwarded mesh frames AC & queue selection

   - netfilter: nf_queue: fix socket access races and bugs

   - batman-adv: fix ToCToU iflink problems and check the result belongs
     to the expected net namespace

   - can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting

   - can: rcar_canfd: register the CAN device when fully ready

   - eth: igb, igc: phy: drop premature return leaking HW semaphore

   - eth: ixgbe: xsk: change !netif_carrier_ok() handling in
     ixgbe_xmit_zc(), prevent live lock when link goes down

   - eth: stmmac: only enable DMA interrupts when ready

   - eth: sparx5: move vlan checks before any changes are made

   - eth: iavf: fix races around init, removal, resets and vlan ops

   - ibmvnic: more reset flow fixes

  Misc:

   - eth: fix return value of __setup handlers"

* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
  net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
  ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
  selftests: mlxsw: resource_scale: Fix return value
  selftests: mlxsw: tc_police_scale: Make test more robust
  net: dcb: disable softirqs in dcbnl_flush_dev()
  bnx2: Fix an error message
  sfc: extend the locking on mcdi->seqno
  net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
  net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
  net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
  tcp: make tcp_read_sock() more robust
  bpf, sockmap: Do not ignore orig_len parameter
  net: ipa: add an interconnect dependency
  net: fix up skbs delta_truesize in UDP GRO frag_list
  iwlwifi: mvm: return value for request_ownership
  nl80211: Update bss channel on channel switch for P2P_CLIENT
  iwlwifi: fix build error for IWLMEI
  ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
  batman-adv: Don't expect inter-netns unique iflink indices
  ...

Pull MIPS fixes from Thomas Bogendoerfer:

 - Fix memory detection for MT7621 devices

 - Fix setnocoherentio kernel option

 - Fix warning when CONFIG_SCHED_CORE is enabled

* tag 'mips-fixes-5.17_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: ralink: mt7621: use bitwise NOT instead of logical
  mips: setup: fix setnocoherentio() boolean setting
  MIPS: smp: fill in sibling and core maps earlier
  MIPS: ralink: mt7621: do memory detection on KSEG1

Pull auxdisplay fixes from Miguel Ojeda:
 "A few lcd2s fixes from Andy Shevchenko"

* tag 'auxdisplay-for-linus-v5.17-rc7' of git://github.com/ojeda/linux:
  auxdisplay: lcd2s: Use proper API to free the instance of charlcd object
  auxdisplay: lcd2s: Fix memory leak in ->remove()
  auxdisplay: lcd2s: Fix lcd2s_redefine_char() feature

While investigating on why a synchronize_net() has been added recently
in ipv6_mc_down(), I found that igmp6_event_query() and igmp6_event_report()
might drop skbs in some cases.

Discussion about removing synchronize_net() from ipv6_mc_down()
will happen in a different thread.

Fixes: f185de28 ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220303173728.937869-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The blamed commit said one thing but did another. It explains that we
should restore the "return err" to the original "goto out_unwind_tagger",
but instead it replaced it with "goto out_unlock".

When DSA_NOTIFIER_TAG_PROTO fails after the first switch of a
multi-switch tree, the switches would end up not using the same tagging
protocol.

Fixes: 0b0e2ff1 ("net: dsa: restore error path of dsa_tree_change_tag_proto")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220303154249.1854436-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit c685c69f ("ixgbe: don't do any AF_XDP zero-copy transmit if
netif is not OK") addressed the ring transient state when
MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the
interface to through down/up. Maurice reported that when carrier is not
ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU
cycles due to the constant NAPI rescheduling as ixgbe_poll() states that
there is still some work to be done.

To fix this, do not set work_done to false for a !netif_carrier_ok().

Fixes: c685c69f ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK")
Reported-by: Maurice Baijens <maurice.baijens@ellips.com>
Tested-by: Maurice Baijens <maurice.baijens@ellips.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>