- 25 Sep, 2020 35 commits
-
-
Jesse Brandeburg authored
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
While we should always make sure that we specify a valid VLAN protocol to vlan_proto_idx(), killing the machine when an invalid value is specified is too harsh and not helpful for debugging. All callers are capable of dealing with an error returned by vlan_proto_idx() so check the index value and propagate it accordingly. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-2020-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 Second set of patches for v5.10. Biggest change here is wcn3680 support to wcn36xx driver, otherwise smaller features. And naturally the usual fixes and cleanups. Major changes: brcmfmac * support 4-way handshake offloading for WPA/WPA2-PSK in AP mode * support SAE authentication offload in AP mode mt76 * mt7663 runtime power management improvements * mt7915 A-MSDU offload wcn36xx * add support wcn3680 Wi-Fi 5 devices ath11k * spectral scan support for ipq6018 ==================== Signed-off-by:
-
Kalle Valo authored
kbuild bot reported than link fails when CONFIG_ATH11K_DEBUGFS is disabled: drivers/net/wireless/ath/ath11k/dp_rx.c:1662: undefined reference to `ath11k_debugfs_htt_ext_stats_handler' This was because I had missed to move the static inline version of the function (which are used when CONFIG_ATH11K_DEBUGFS is disabled) to debufs_htt_stats.h. Also move ath11k_debugfs_htt_stats_req() at the same time. And create a stub also for ath11k_debugfs_htt_stats_init() for consistency, even if it's not needed. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 568f0603 ("ath11k: debugfs: move some function declarations to correct header files") Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601024241-16594-1-git-send-email-kvalo@codeaurora.org
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: updates for -next There are some updates for the HNS3 ethernet driver. ==================== Signed-off-by: -
Guangbin Huang authored
VF devices do not have speed division, its speed is depended on its PF. So macro name of PCI device id of VF is incorrent to have 100G info, it should be renamed by removing 100G info. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Guangbin Huang authored
The 200G device has a new device id 0xA228, so adds this device id to pci table, then the driver can probe it. As speed_ability queried from firmware has only 8 bits and already be used up, so firmware adds extra speed_ability_ext to indicate more speed abilities to support 200G and driver needs to parse it. Signed-off-by:
-
Yufeng Mo authored
The pf's interrupt resources will be changed with the number of enabled pf. Dumping this resource information will be helpful for debugging. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
In hns3_process_hw_error(), the hardware error detection of the ROCEE AXI RESP error type is added. When this error occurs, the client needs to be notified of this error and take corresponding operation. Signed-off-by:
-
Yufeng Mo authored
If a variable is assigned a value before it is used, it's no need to assign an initial value to the variable. So remove these redundant operations. Signed-off-by:
-
Yufeng Mo authored
Remove some unnecessary parameters of hclge_title_idx_print(), and rename this function for readability. Signed-off-by:
-
Florian Westphal authored
Since commit cfde141e ("mptcp: move option parsing into mptcp_incoming_options()"), the 3rd function argument is no longer used. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Geliang Tang says: ==================== mptcp: RM_ADDR/ADD_ADDR enhancements This series include two enhancements for the MPTCP path management, namely RM_ADDR support and ADD_ADDR echo support, as specified by RFC sections 3.4.1 and 3.4.2. 1 RM_ADDR support include 9 patches (1-3 and 8-13): Patch 1 is the helper for patch 2, these two patches add the RM_ADDR outgoing functions, which are derived from ADD_ADDR's corresponding functions. Patch 3 adds the RM_ADDR incoming logic, when RM_ADDR suboption is received, close the subflow matching the rm_id, and update PM counter. Patch 8 is the main remove routine. When the PM netlink removes an address, we traverse all the existing msk sockets to find the relevant sockets. Then trigger the RM_ADDR signal and remove the subflow which using this local address, this subflow removing functions has been implemented in patch 9. Finally, patches 10-13 are the self-tests for RM_ADDR. 2 ADD_ADDR echo support include 7 patches (4-7 and 14-16). Patch 4 adds the ADD_ADDR echo logic, when the ADD_ADDR suboption has been received, send out the same ADD_ADDR suboption with echo-flag, and no HMAC included. Patches 5 and 6 are the self-tests for ADD_ADDR echo. Patch 7 is a little cleaning up. Patch 14 and 15 are the helpers for patch 16. These three patches add the ADD_ADDR retransmition when no ADD_ADDR echo is received. ==================== Signed-off-by: -
Geliang Tang authored
This patch implemented the retransmition of ADD_ADDR when no ADD_ADDR echo is received. It added a timer with the announced address. When timeout occurs, ADD_ADDR will be retransmitted. Suggested-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Suggested-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Geliang Tang <geliangtang@gmail.com> Reviewed-by:
-
Geliang Tang authored
This patch added a new helper sk_stop_timer_sync, it deactivates a timer like sk_stop_timer, but waits for the handler to finish. Acked-by:
-
Geliang Tang authored
Add a new struct mptcp_pm_add_entry to describe add_addr's entry. Acked-by:
-
Geliang Tang authored
This patch added the remove addr and subflow test cases and two new functions. The first function run_remove_tests calls do_transfer with two new arguments, rm_nr_ns1 and rm_nr_ns2, for the numbers of addresses should be removed during the transfer process in namespace 1 and namespace 2. If both these two arguments are 0, we do the join test cases with "mptcp_connect -j" command. Otherwise, do the remove test cases with "mptcp_connect -r" command. The second function chk_rm_nr checks the RM_ADDR related mibs's counters. The output of the test cases looks like this: 11 remove single subflow syn[ ok ] - synack[ ok ] - ack[ ok ] rm [ ok ] - sf [ ok ] 12 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ] rm [ ok ] - sf [ ok ] 13 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] rm [ ok ] - sf [ ok ] 14 remove subflow and signal syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] rm [ ok ] - sf [ ok ] 15 remove subflows and signal syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] rm [ ok ] - sf [ ok ] Suggested-by:Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by:
-
Geliang Tang authored
This patch added a new cfg, named cfg_remove in mptcp_connect. This new cfg_remove is copied from cfg_join. The only difference between them is in the do_rnd_write function. Here we slow down the transfer process of all data to let the RM_ADDR suboption can be sent and received completely. Otherwise the remove address and subflow test cases don't work. Suggested-by:
-
Geliang Tang authored
This patch added a new helper named mptcp_destroy_common containing the shared code between mptcp_destroy() and mptcp_sock_destruct(). Suggested-by:
-
Geliang Tang authored
This patch added two new mibs for RM_ADDR, named MPTCP_MIB_RMADDR and MPTCP_MIB_RMSUBFLOW, when the RM_ADDR suboption is received, increase the first mib counter, when the local subflow is removed, increase the second mib counter. Suggested-by:
-
Geliang Tang authored
This patch implemented the local subflow removing function, mptcp_pm_remove_subflow, it simply called mptcp_pm_nl_rm_subflow_received under the PM spin lock. We use mptcp_pm_remove_subflow to remove a local subflow, so change it's argument from remote_id to local_id. We check subflow->local_id in mptcp_pm_nl_rm_subflow_received to remove a subflow. Suggested-by:
-
Geliang Tang authored
This patch implements the remove announced addr and subflow logic in PM netlink. When the PM netlink removes an address, we traverse all the existing msk sockets to find the relevant sockets. We add a new list named anno_list in mptcp_pm_data, to record all the announced addrs. In the traversing, we check if it has been recorded. If it has been, we trigger the RM_ADDR signal. We also check if this address is in conn_list. If it is, we remove the subflow which using this local address. Since we call mptcp_pm_free_anno_list in mptcp_destroy, we need to move __mptcp_init_sock before the mptcp_is_enabled check in mptcp_init_sock. Suggested-by:
-
Geliang Tang authored
The re-check of pm->accept_subflow with pm->lock held was missing, this patch fixed it. Suggested-by:
-
Geliang Tang authored
This patch added the ADD_ADDR related mibs counter check function chk_add_nr(). This function check both ADD_ADDR and ADD_ADDR with echo flag. The output looks like this: 07 unused signal address syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] 08 signal address syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] 09 subflow and signal syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] 10 multiple subflows and signal syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] 11 remove subflow and signal syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] Reviewed-by: -
Geliang Tang authored
This patch added two mibs for ADD_ADDR, MPTCP_MIB_ADDADDR for receiving of the ADD_ADDR suboption with echo-flag=0, and MPTCP_MIB_ECHOADD for receiving the ADD_ADDR suboption with echo-flag=1. Reviewed-by:
-
Geliang Tang authored
When the ADD_ADDR suboption has been received, we need to send out the same ADD_ADDR suboption with echo-flag=1, and no HMAC. Suggested-by:
-
Geliang Tang authored
This patch added the RM_ADDR option parsing logic: We parsed the incoming options to find if the rm_addr option is received, and called mptcp_pm_rm_addr_received to schedule PM work to a new status, named MPTCP_PM_RM_ADDR_RECEIVED. PM work got this status, and called mptcp_pm_nl_rm_addr_received to handle it. In mptcp_pm_nl_rm_addr_received, we closed the subflow matching the rm_id, and updated PM counter. Suggested-by:
-
Geliang Tang authored
This patch added a new signal named rm_addr_signal in PM. On outgoing path, we called mptcp_pm_should_rm_signal to check if rm_addr_signal has been set. If it has been, we sent out the RM_ADDR option. Suggested-by:
-
Geliang Tang authored
This patch renamed addr_signal and the related functions with the explicit word "add". Suggested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2020-09-22 This series includes mlx5 updates 1) Add support for Connection Tracking offload in NIC mode. Supporting CT offload in NIC mode on Mellanox cards is useful for scenarios where the dual port NIC serves as a gateway between 2 networks and forwards traffic between these networks. Since the traffic is not terminated on the host in this case, no use of SRIOV VFs and/or switchdev mode is required. Today Mellanox NIC cards already support offloading of packet forwarding between physical ports without going to the host so combining it with CT offloading allows users to create a gateway with forwarding and CT (Including NAT) offloading capabilities in non-switchdev mode. To support connection tracking in non-Switchdev mode (Single NIC mode), we need to make use of the current Connection tracking infrastructure implemented on top of E-Switch and the mlx5 generic flow table chains APIs, to make it work on non-Eswitch steering domain e.g. NIC RX domain, the following was performed: 1.1) Refactor current flow steering chains infrastructure and updates TC nic mode implementation to use flow table chains. 1.2) Refactor current Connection Tracking (CT) infrastructure to not assume E-switch backend, and make the CT layer agnostic to underlying steering mode (E-Switch/NIC) 1.3) Plumbing to support CT offload in NIC mode. 2) Trivial code cleanups. ==================== Signed-off-by: -
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-mac: add PCS support through the Lynx module This patch set aims to add PCS support in the dpaa2-eth driver by leveraging the Lynx PCS module. The first two patches are some missing pieces: the first one adding support for 10GBASER in Lynx PCS while the second one adds a new function - of_mdio_find_device - which is helpful in retrieving the PCS represented as a mdio_device. The final patch adds the glue logic between phylink and the Lynx PCS module: it retrieves the PCS represented as an mdio_device and registers it to Lynx and phylink. From that point on, any PCS callbacks are treated by Lynx, without dpaa2-eth interaction. Changes in v2: - move put_device() after destroy - 3/3 ==================== Signed-off-by: -
Ioana Ciornei authored
Include PCS support in the dpaa2-eth driver by integrating it with the new Lynx PCS module. There is not much to talk about in terms of changes needed in the dpaa2-eth driver since the only steps necessary are to find the MDIO device representing the PCS, register it to the Lynx PCS module and then let phylink know if its existence also. After this, the PCS callbacks will be treated directly by Lynx, without interraction from dpaa2-eth's part. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King authored
Add a helper function which finds the mdio_device structure given a device tree node. This is helpful for finding the PCS device based on a DTS node but managing it as a mdio_device instead of a phy_device. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Ioana Ciornei authored
Add support in the Lynx PCS module for the 10GBASE-R mode which is only used to get the link state, since it offers a single fixed speed. Signed-off-by:
-
Vladimir Oltean authored
Currently, ocelot switchdev passes the skb directly to the function that enqueues it to the list of skb's awaiting a TX timestamp. Whereas the felix DSA driver first clones the skb, then passes the clone to this queue. This matters because in the case of felix, the common IRQ handler, which is ocelot_get_txtstamp(), currently clones the clone, and frees the original clone. This is useless and can be simplified by using skb_complete_tx_timestamp() instead of skb_tstamp_tx(). Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
- 24 Sep, 2020 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.10. Major changes: wcn36xx * add support wcn3680 Wi-Fi 5 devices ath11k * spectral scan support for ipq6018
-
https://github.com/nbd168/wirelessKalle Valo authored
mt76 patches for 5.10 * mt7663 runtime power management improvements * performance improvements * sdio support fixes * testmode fixes * mt7622 fixes * 7915 A-MSDU offload * cleanups # gpg: Signature made Thu 24 Sep 2020 07:10:25 PM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
-
Lorenzo Bianconi authored
Remove A-MSDU max_tx_fragments constraint for sdio since the check is already performed in mt7663s_tx_run_queue routine Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Qinglang Miao authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Shayne Chen authored
Add a missing offchannel condition for channel switch reason, which bypasses DPD calibration to reduce scanning time. Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Signed-off-by:
-
