- 22 Apr, 2020 40 commits
-
-
Taniya Das authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 21ea4b62 upstream. In case of update config failure, return -EBUSY, so that consumers could handle the failure gracefully. Signed-off-by:
Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Avihai Horon authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 987914ab upstream. After a successful allocation of path_rec, num_paths is set to 1, but any error after such allocation will leave num_paths uncleared. This causes to de-referencing a NULL pointer later on. Hence, num_paths needs to be set back to 0 if such an error occurs. The following crash from syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0 Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6 14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffff88006586f980 EFLAGS: 00010207 RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475 RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72 R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30 R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200 FS: 00000000016fc880(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_copy_path_rec_from_user+0xcc0/0xcc0 ? __mutex_unlock_slowpath+0xfc/0x670 ? wait_for_completion+0x3b0/0x3b0 ? ucma_query_route+0x818/0xc60 ucma_query_route+0x818/0xc60 ? ucma_listen+0x1b0/0x1b0 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 ? ucma_listen+0x1b0/0x1b0 ? ucma_write+0x292/0x460 ucma_write+0x292/0x460 ? ucma_close_id+0x60/0x60 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 __vfs_write+0xf7/0x620 ? ucma_close_id+0x60/0x60 ? kernel_read+0x110/0x110 ? time_hardirqs_on+0x19/0x580 ? lock_acquire+0x18b/0x3a0 ? finish_task_switch+0xf3/0x5d0 ? _raw_spin_unlock_irq+0x29/0x40 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1be/0x5d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? security_file_permission+0x172/0x1e0 vfs_write+0x192/0x460 ksys_write+0xc6/0x1a0 ? __ia32_sys_read+0xb0/0xb0 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe ? do_syscall_64+0x1d/0x470 do_syscall_64+0x9e/0x470 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3c86aa70 ("RDMA/cm: Add RDMA CM support for IBoE devices") Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.orgSigned-off-by:
Avihai Horon <avihaih@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Qiujun Huang authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 71811cac upstream. Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't increase dlc->refcnt. Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Suggested-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Kaike Wan authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit dfb5394f upstream. When kobject_init_and_add() returns an error in the function hfi1_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.comReviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Paul Cercueil authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 9401d5aa upstream. The 4-bit divider value was written at offset 8, while the jz4740 programming manual locates it at offset 0. Fixes: 26b0aad8 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.netSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit c3422ad5 upstream. Currently there is no check on platform_get_irq() return value in case it fails, hence never actually reporting any errors and causing unexpected behavior when using such value as argument for function regmap_irq_get_virq(). Fix this by adding a proper check, a message reporting any errors and returning *pirq* Addresses-Coverity-ID: 1443940 ("Improper use of negative value") Fixes: 843735b7 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
David Ahern authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 4054ab64 upstream. A recent change to the netlink code: 6e237d09 ("netlink: Relax attr validation for fixed length types") logs a warning when programs send messages with invalid attributes (e.g., wrong length for a u32). Yafang reported this error message for tools/accounting/getdelays.c. send_cmd() is wrongly adding 1 to the attribute length. As noted in include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload length, so drop the +1. Fixes: 9e06d3f9 ("per task delay accounting taskstats interface: documentation fix") Reported-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jason A. Donenfeld authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 69efea71 upstream. It turns out that RDRAND is pretty slow. Comparing these two constructions: for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret)) arch_get_random_long(&ret); and long buf[CHACHA_BLOCK_SIZE / sizeof(long)]; extract_crng((u8 *)buf); it amortizes out to 352 cycles per long for the top one and 107 cycles per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H. And importantly, the top one has the drawback of not benefiting from the real rng, whereas the bottom one has all the nice benefits of using our own chacha rng. As get_random_u{32,64} gets used in more places (perhaps beyond what it was originally intended for when it was introduced as get_random_{int,long} back in the md5 monstrosity era), it seems like it might be a good thing to strengthen its posture a tiny bit. Doing this should only be stronger and not any weaker because that pool is already initialized with a bunch of rdrand data (when available). This way, we get the benefits of the hardware rng as well as our own rng. Another benefit of this is that we no longer hit pitfalls of the recent stream of AMD bugs in RDRAND. One often used code pattern for various things is: do { val = get_random_u32(); } while (hash_table_contains_key(val)); That recent AMD bug rendered that pattern useless, whereas we're really very certain that chacha20 output will give pretty distributed numbers, no matter what. So, this simplification seems better both from a security perspective and from a performance perspective. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jisheng Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1874045 [ Upstream commit 3e1221ac ] Commit 9463c445 ("net: stmmac: dwmac1000: Clear unused address entries") cleared the unused mac address entries, but introduced an out-of bounds mac address register programming bug -- After setting the secondary unicast mac addresses, the "reg" value has reached netdev_uc_count() + 1, thus we should only clear address entries if (addr < perfect_addr_number) Fixes: 9463c445 ("net: stmmac: dwmac1000: Clear unused address entries") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit aa9f7d51 upstream. Using an empty (malformed) nodelist that is not caught during mount option parsing leads to a stack-out-of-bounds access. The option string that was used was: "mpol=prefer:,". However, MPOL_PREFERRED requires a single node number, which is not being provided here. Add a check that 'nodes' is not empty after parsing for MPOL_PREFERRED's nodeid. Fixes: 095f1fc4 ("mempolicy: rework shmem mpol parsing and display") Reported-by:
Entropy Moe <3ntr0py1337@gmail.com> Reported-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Daniel Jordan authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 38228e88 upstream. lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken: # echo 0 > /sys/devices/system/cpu/cpu1/online # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask ====================================================== WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted ------------------------------------------------------ bash/205 is trying to acquire lock: ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120 but task is already holding lock: ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120 which lock already depends on the new lock. padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent order. Which should be first? CPU hotplug calls into padata with cpu_hotplug_lock already held, so it should have priority. Fixes: 6751fb3c ("padata: Use get_online_cpus/put_online_cpus") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Krzysztof Opasiak authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit e5a89162 upstream. This descriptor is never used. Currently device qualifier descriptor is generated by compossite code, so no need to keep it in function file. Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Krzysztof Opasiak <kopasiak90@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: kbuild test robot <lkp@intel.com> Signed-off-by:
-
Krzysztof Opasiak authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit d4529f9b upstream. This descriptor is never used. Currently device qualifier descriptor is generated by compossite code so no need to keep it in function file. Signed-off-by:
-
Guillaume Nault authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit b228a940 upstream. There are several ways to remove L2TP sessions: * deleting a session explicitly using the netlink interface (with L2TP_CMD_SESSION_DELETE), * deleting the session's parent tunnel (either by closing the tunnel's file descriptor or using the netlink interface), * closing the PPPOL2TP file descriptor of a PPP pseudo-wire. In some cases, when these methods are used concurrently on the same session, the session can be removed twice, leading to use-after-free bugs. This patch adds a 'dead' flag, used by l2tp_session_delete() and l2tp_tunnel_closeall() to prevent them from stepping on each other's toes. The session deletion path used when closing a PPPOL2TP file descriptor doesn't need to be adapted. It already has to ensure that a session remains valid for the lifetime of its PPPOL2TP file descriptor. So it takes an extra reference on the session in the ->session_close() callback (pppol2tp_session_close()), which is eventually dropped in the ->sk_destruct() callback of the PPPOL2TP socket (pppol2tp_session_destruct()). Still, __l2tp_session_unhash() and l2tp_session_queue_purge() can be called twice and even concurrently for a given session, but thanks to proper locking and re-initialisation of list fields, this is not an issue. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Guillaume Nault authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit cdd10c96 upstream. If l2tp_tunnel_delete() or l2tp_tunnel_closeall() deletes a session right after pppol2tp_release() orphaned its socket, then the 'sock' variable of the pppol2tp_session_close() callback is NULL. Yet the session is still used by pppol2tp_release(). Therefore we need to take an extra reference in any case, to prevent l2tp_tunnel_delete() or l2tp_tunnel_closeall() from freeing the session. Since the pppol2tp_session_close() callback is only set if the session is associated to a PPPOL2TP socket and that both l2tp_tunnel_delete() and l2tp_tunnel_closeall() hold the PPPOL2TP socket before calling pppol2tp_session_close(), we're sure that pppol2tp_session_close() and pppol2tp_session_destruct() are paired and called in the right order. So the reference taken by the former will be released by the later. Signed-off-by:
-
Gao Feng authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 54c151d9 upstream. Use PPP_ALLSTATIONS, PPP_UI, and SEND_SHUTDOWN instead of 0xff, 0x03, and 2 separately. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Acked-by:
-
Guillaume Nault authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit dbdbc73b upstream. l2tp_session_create() relies on its caller for checking for duplicate sessions. This is racy since a session can be concurrently inserted after the caller's verification. Fix this by letting l2tp_session_create() verify sessions uniqueness upon insertion. Callers need to be adapted to check for l2tp_session_create()'s return code instead of calling l2tp_session_find(). pppol2tp_connect() is a bit special because it has to work on existing sessions (if they're not connected) or to create a new session if none is found. When acting on a preexisting session, a reference must be held or it could go away on us. So we have to use l2tp_session_get() instead of l2tp_session_find() and drop the reference before exiting. Fixes: d9e31d17 ("l2tp: Add L2TP ethernet pseudowire support") Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
-
Guillaume Nault authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 57377d63 upstream. Holding a reference on session is required before calling pppol2tp_session_ioctl(). The session could get freed while processing the ioctl otherwise. Since pppol2tp_session_ioctl() uses the session's socket, we also need to take a reference on it in l2tp_session_get(). Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
-
Guillaume Nault authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 61b9a047 upstream. Taking a reference on sessions in l2tp_recv_common() is racy; this has to be done by the callers. To this end, a new function is required (l2tp_session_get()) to atomically lookup a session and take a reference on it. Callers then have to manually drop this reference. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
-
Shmulik Ladkani authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 0e6b5259 upstream. l2tp_ip6 tunnel and session lookups were still using init_net, although the l2tp core infrastructure already supports lookups keyed by 'net'. As a result, l2tp_ip6_recv discarded packets for tunnels/sessions created in namespaces other than the init_net. Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
phil.turnbull@oracle.com authored
BugLink: https://bugs.launchpad.net/bugs/1874045 commit 4ac36a4a upstream. If 'tunnel' is NULL we should return -EBADF but the 'end_put_sess' path unconditionally sets 'error' back to zero. Rework the error path so it more closely matches pppol2tp_sendmsg. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
BugLink: https://bugs.launchpad.net/bugs/1874045 [ Upstream commit 582eea23 ] Under certain circumstances, depending on the order of addresses on the interfaces, it could be that sctp_v[46]_get_dst() would return a dst with a mismatched struct flowi. For example, if when walking through the bind addresses and the first one is not a match, it saves the dst as a fallback (added in 410f0383), but not the flowi. Then if the next one is also not a match, the previous dst will be returned but with the flowi information for the 2nd address, which is wrong. The fix is to use a locally stored flowi that can be used for such attempts, and copy it to the parameter only in case it is a possible match, together with the corresponding dst entry. The patch updates IPv6 code mostly just to be in sync. Even though the issue is also present there, it fallback is not expected to work with IPv6. Fixes: 410f0383 ("sctp: add routing output fallback") Reported-by:
Jin Meng <meng.a.jin@nokia-sbell.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
William Dauchy authored
BugLink: https://bugs.launchpad.net/bugs/1874045 [ Upstream commit 25629fda ] when creating a new ipip interface with no local/remote configuration, the lookup is done with TUNNEL_NO_KEY flag, making it impossible to match the new interface (only possible match being fallback or metada case interface); e.g: `ip link add tunl1 type ipip dev eth0` To fix this case, adding a flag check before the key comparison so we permit to match an interface with no local/remote config; it also avoids breaking possible userland tools relying on TUNNEL_NO_KEY flag and uninitialised key. context being on my side, I'm creating an extra ipip interface attached to the physical one, and moving it to a dedicated namespace. Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
William Dauchy <w.dauchy@criteo.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1874045 [ Upstream commit fbe4e0c1 ] fib_triestat_seq_show() calls hlist_for_each_entry_rcu(tb, head, tb_hlist) without rcu_read_lock() will trigger a warning, net/ipv4/fib_trie.c:2579 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by proc01/115277: #0: c0000014507acf00 (&p->lock){+.+.}-{3:3}, at: seq_read+0x58/0x670 Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 fib_triestat_seq_show+0x750/0x880 seq_read+0x1a0/0x670 proc_reg_read+0x10c/0x1b0 __vfs_read+0x3c/0x70 vfs_read+0xac/0x170 ksys_read+0x7c/0x140 system_call+0x5c/0x68 Fix it by adding a pair of rcu_read_lock/unlock() and use cond_resched_rcu() to avoid the situation where walking of a large number of items may prevent scheduling for a long time. Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Gerd Hoffmann authored
BugLink: https://bugs.launchpad.net/bugs/1874045 [ Upstream commit 8c34cd1a ] Shutdown of firmware framebuffer has a bunch of problems. Because of this the framebuffer region might still be reserved even after drm_fb_helper_remove_conflicting_pci_framebuffers() returned. Don't consider pci_request_region() failure for the framebuffer region as fatal error to workaround this issue. Reported-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.comSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1873852Signed-off-by:
-
disconnect3d authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit db2c5494 upstream. This patch fixes an off-by-one error in strncpy size argument in tools/perf/util/map.c. The issue is that in: strncmp(filename, "/system/lib/", 11) the passed string literal: "/system/lib/" has 12 bytes (without the NULL byte) and the passed size argument is 11. As a result, the logic won't match the ending "/" byte and will pass filepaths that are stored in other directories e.g. "/system/libmalicious/bin" or just "/system/libmalicious". This functionality seems to be present only on Android. I assume the /system/ directory is only writable by the root user, so I don't think this bug has much (or any) security impact. Fixes: eca81836 ("perf tools: Add automatic remapping of Android libraries") Signed-off-by:
disconnect3d <dominik.b.czarnota@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Keeping <john@metanate.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Lentine <mlentine@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Marek Vasut authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 8262e6f9 upstream. This patch reverts 58292104 ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098 ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104 ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098 ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 8096f229 upstream. For the bpf syscall, we are relying on the compiler to properly zero out the bpf_attr union that we copy userspace data into. Unfortunately that doesn't always work properly, padding and other oddities might not be correctly zeroed, and in some tests odd things have been found when the stack is pre-initialized to other values. Fix this by explicitly memsetting the structure to 0 before using it. Reported-by:
Maciej Żenczykowski <maze@google.com> Reported-by:
John Stultz <john.stultz@linaro.org> Reported-by:
Alexander Potapenko <glider@google.com> Reported-by:
Alistair Delva <adelva@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://android-review.googlesource.com/c/kernel/common/+/1235490 Link: https://lore.kernel.org/bpf/20200320094813.GA421650@kroah.comSigned-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 7cf64b18 upstream. vt_in_use() dereferences console_driver->ttys[i] without proper locking. This is broken because the tty can be closed and freed concurrently. We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL' and skipping the check of tty_struct::count. But, looking at console_driver->ttys[i] isn't really appropriate anyway because even if it is NULL the tty can still be in the process of being closed. Instead, fix it by making vt_in_use() require console_lock() and check whether the vt is allocated and has port refcount > 1. This works since following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console" the port refcount is incremented while the vt is open. Reproducer (very unreliable, but it worked for me after a few minutes): #include <fcntl.h> #include <linux/vt.h> int main() { int fd, nproc; struct vt_stat state; char ttyname[16]; fd = open("/dev/tty10", O_RDONLY); for (nproc = 1; nproc < 8; nproc *= 2) fork(); for (;;) { sprintf(ttyname, "/dev/tty%d", rand() % 8); close(open(ttyname, O_RDONLY)); ioctl(fd, VT_GETSTATE, &state); } } KASAN report: BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 Read of size 4 at addr ffff888065722468 by task syz-vt2/132 CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d36 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline] vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Allocated by task 136: [...] kzalloc include/linux/slab.h:669 [inline] alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982 tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 41: [...] kfree+0xbf/0x200 mm/slab.c:3757 free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177 release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468 process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264 worker_thread+0x8b/0xc80 kernel/workqueue.c:2410 [...] Fixes: 4001d7b7 ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Acked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200322034305.210082-3-ebiggers@kernel.orgSigned-off-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 2c935bc5 upstream. Since we need to change the implementation, stop exposing internals. Provide kref_read() to read the current reference count; typically used for debug messages. Kills two anti-patterns: atomic_read(&kref->refcount) kref->refcount.counter Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> [only add kref_read() to kref.h for stable backports - gregkh] Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit ca4463bf upstream. The VT_DISALLOCATE ioctl can free a virtual console while tty_release() is still running, causing a use-after-free in con_shutdown(). This occurs because VT_DISALLOCATE considers a virtual console's 'struct vc_data' to be unused as soon as the corresponding tty's refcount hits 0. But actually it may be still being closed. Fix this by making vc_data be reference-counted via the embedded 'struct tty_port'. A newly allocated virtual console has refcount 1. Opening it for the first time increments the refcount to 2. Closing it for the last time decrements the refcount (in tty_operations::cleanup() so that it happens late enough), as does VT_DISALLOCATE. Reproducer: #include <fcntl.h> #include <linux/vt.h> #include <sys/ioctl.h> #include <unistd.h> int main() { if (fork()) { for (;;) close(open("/dev/tty5", O_RDWR)); } else { int fd = open("/dev/tty10", O_RDWR); for (;;) ioctl(fd, VT_DISALLOCATE, 5); } } KASAN report: BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129 CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514 tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629 tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789 [...] Allocated by task 129: [...] kzalloc include/linux/slab.h:669 [inline] vc_allocate drivers/tty/vt/vt.c:1085 [inline] vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066 con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229 tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline] tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 130: [...] kfree+0xbf/0x1e0 mm/slab.c:3757 vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline] vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Fixes: 4001d7b7 ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Reported-by: syzbot+522643ab5729b0421998@syzkaller.appspotmail.com Acked-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 1aa6e058 upstream. The vc_cons_allocated() checks in vt_ioctl() and vt_compat_ioctl() are unnecessary because they can only be reached by calling ioctl() on an open tty, which implies the corresponding virtual console is allocated. And even if the virtual console *could* be freed concurrently, then these checks would be broken since they aren't done under console_lock, and the vc_data is dereferenced before them anyway. So, remove these unneeded checks to avoid confusion. Signed-off-by:
-
Jiri Slaby authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit f400991b upstream. vt_dont_switch is pure boolean, no need for whole char. Signed-off-by:
-
Jiri Slaby authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit e587e8f1 upstream. These two were macros. Switch them to static inlines, so that it's more understandable what they are doing. Signed-off-by:
-
Jiri Slaby authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit dce05aa6 upstream. Avoid global variables (namely sel_cons) by introducing vc_is_sel. It checks whether the parameter is the current selection console. This will help putting sel_cons to a struct later. Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit a246b4d5 upstream. Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity check in cit_get_packet_size() is not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 659fefa0 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01") Fixes: 59f8b0bf ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting") Cc: stable <stable@vger.kernel.org> # 2.6.37 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 485b06aa upstream. Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity checks in stv06xx_start() and pb0100_start() are not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 8668d504 ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor") Fixes: c0b33bdc ("[media] gspca-stv06xx: support bandwidth changing") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit f5298101 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: c4018fa2 ("[media] dib0700: fix RC support on Hauppauge Nova-TD") Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 99891234 upstream. Make sure to check that we have at least one endpoint before accessing the endpoint array to avoid dereferencing a NULL-pointer on stream start. Note that these sanity checks are not redundant as the driver is mixing looking up altsettings by index and by number, which need not coincide. Fixes: 1876bb92 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge") Fixes: b282d873 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
