- 13 Jun, 2017 29 commits
-
-
Don Brace authored
- Block I/O requests with 0 length transfers which go down the ioaccel path. This causes lockup issues down in the basecode. - These issues have been fixed, but there are customers who are experiencing the issues when running older firmware. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Scott Teel authored
create new worker thread to monitor controller events - both the rescan and event monitor workers can cause a rescan to occur however for multipath we have found that we need to respond faster than the normal scheduled rescan interval for path fail-overs. - getting controller events only involves reading a register, but the rescan worker can obtain an updated LUN list when there is a PTRAID device present. - move common code to a separate function. advantages: - detect controller events more frequently. - leave rescan thread interval at 30 seconds. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
- queue depth assignment not in correct place, had no effect. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
- mark device state sooner. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
- call scsi_done when the command completes. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
- schedule another scan. - mark current scan as completed. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
Prevent enclosure resets. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.tell@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
Use the return from TUR as a check for the device state. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.tell@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
external shelves do not support BMICs. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
- align with latest spec. - added __attribute((aligned(512))) Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Update the driver version to 50834 Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Remove reference to Series-9 HBA and created arc ctrl check function. Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Added info and error messages in controller reset function to log information about the status of the IOP/SOFT reset. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Make sure that IOP and SOFT reset are enabled for both for both arc and hba1000 controllers. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Made sure that ioctl commands return in case of a controller reset. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
The command thread checks the ctrl health periodically before sending updates to the controller. The function that it uses is aac_check_health which does more than get the health status. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Removed switch case and replaced with if mask checks. Moved KERNEL_PANIC check to when bled is less than 0. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Now the driver issues a soft reset and waits for the controller to be up and running by periodically checking on the status of the controller health registers. Also prevents ARC adapters from issuing soft reset if IOP resets failed. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Added function that waits with a timeout for the ctrl to be up and running after triggering an IOP reset. Also removed 30 sec sleep as it is not needed. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Reworked IOP reset to remove unneeded variable and created a helper function to notify fw of an imminent IOP reset. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
The driver can now trigger IOP reset with a single reset mask. Removed code that retrieves a reset_mask from the firmware. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Log the status of the controller before issuing a reset. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Log the location of the scsi cmds before triggering a reset. This information is useful for debugging. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Change the completion wait time for the fibs in the reset and abort callback from 2 minutes to 15 seconds. 2 minutes is too long for waiting for completion. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
Check health does not need to reset the ctrl but just return the controller health status. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
The default queue depth for non NATIVE RAW disks is calculated from the number of fibs and number of disks or a max of 256. This causes poor disk IO performance. The fix is to set default qd based on the type of disks (SATA -32 and SAS -64) Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
The qd for ARC Native disks is calculated by dividing the max IO 1024 by the number of disks or 256 which ever is lower. This causes poor disk IO performance. The fix is set the qd based on the type of disk (SAS - 64 and SATA - 32). Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
The driver changed the DMA consistent map after consistent memory was allocated, this invalidated the IOMMU identity mapping. The fix was to make sure that we set the DMA consistent mask setting once depending on the controller card. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
The raw srb commands do not requires memory that in the ZONE_DMA memory space. For 32bit srb commands use GFP_DMA32 to limit the memory to 32bit memory range (4GB). Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 11 Jun, 2017 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull key subsystem fixes from James Morris: "Here are a bunch of fixes for Linux keyrings, including: - Fix up the refcount handling now that key structs use the refcount_t type and the refcount_t ops don't allow a 0->1 transition. - Fix a potential NULL deref after error in x509_cert_parse(). - Don't put data for the crypto algorithms to use on the stack. - Fix the handling of a null payload being passed to add_key(). - Fix incorrect cleanup an uninitialised key_preparsed_payload in key_update(). - Explicit sanitisation of potentially secure data before freeing. - Fixes for the Diffie-Helman code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) KEYS: fix refcount_inc() on zero KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API crypto : asymmetric_keys : verify_pefile:zero memory content before freeing KEYS: DH: add __user annotations to keyctl_kdf_params KEYS: DH: ensure the KDF counter is properly aligned KEYS: DH: don't feed uninitialized "otherinfo" into KDF KEYS: DH: forbid using digest_null as the KDF hash KEYS: sanitize key structs before freeing KEYS: trusted: sanitize all key material KEYS: encrypted: sanitize all key material KEYS: user_defined: sanitize key payloads KEYS: sanitize add_key() and keyctl() key payloads KEYS: fix freeing uninitialized memory in key_update() KEYS: fix dereferencing NULL payload with nonzero length KEYS: encrypted: use constant-time HMAC comparison KEYS: encrypted: fix race causing incorrect HMAC calculations KEYS: encrypted: fix buffer overread in valid_master_desc() KEYS: encrypted: avoid encrypting/decrypting stack buffers KEYS: put keyring if install_session_keyring_to_cred() fails KEYS: Delete an error message for a failed memory allocation in get_derived_key() ...
-
Linus Torvalds authored
Commit abb2ea7d ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull randomness fixes from Ted Ts'o: "Improve performance by using a lockless update mechanism suggested by Linus, and make sure we refresh per-CPU entropy returned get_random_* as soon as the CRNG is initialized" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: invalidate batched entropy after crng init random: use lockless method of accessing and updating f->reg_idx
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix various bug fixes in ext4 caused by races and memory allocation failures" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix fdatasync(2) after extent manipulation operations ext4: fix data corruption for mmap writes ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO ext4: fix quota charging for shared xattr blocks ext4: remove redundant check for encrypted file on dio write path ext4: remove unused d_name argument from ext4_search_dir() et al. ext4: fix off-by-one error when writing back pages before dio read ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() ext4: keep existing extra fields when inode expands ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff() ext4: fix SEEK_HOLE jbd2: preserve original nofs flag during journal restart ext4: clear lockdep subtype for quota files on quota off
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "A few overdue GPIO patches for the v4.12 kernel. - Fix debounce logic on the Aspeed platform. - Fix the "virtual gpio" things on the Intel Crystal Cove. - Fix the blink counter selection on the MVEBU platform" * tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mvebu: fix gpio bank registration when pwm is used gpio: mvebu: fix blink counter register selection MAINTAINERS: remove self from GPIO maintainers gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs gpio: aspeed: Don't attempt to debounce if disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small driver fixes for 4.12-rc5. Nothing major here, just some small bugfixes found by people testing, and a MAINTAINERS file update for the genwqe driver. All have been in linux-next with no reported issues" [ The cxl driver fix came in through the powerpc tree earlier ] * tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: cxl: Avoid double free_irq() for psl,slice interrupts mei: make sysfs modalias format similar as uevent modalias drivers: char: mem: Fix wraparound check to allow mappings up to the end MAINTAINERS: Change maintainer of genwqe driver goldfish_pipe: use GFP_ATOMIC under spin lock firmware: vpd: do not leak kobjects firmware: vpd: avoid potential use-after-free when destroying section firmware: vpd: do not leave freed section attributes to the list
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO fixes from Greg KH: "These are mostly all IIO driver fixes, resolving a number of tiny issues. There's also a ccree and lustre fix in here as well, both fix problems found in those codebases. All have been in linux-next with no reported issues" * tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ccree: fix buffer copy staging/lustre/lov: remove set_fs() call from lov_getstripe() staging: ccree: add CRYPTO dependency iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function iio: light: ltr501 Fix interchanged als/ps register field iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's iio: trigger: fix NULL pointer dereference in iio_trigger_write_current() iio: adc: max9611: Fix attribute measure unit iio: adc: ti_am335x_adc: allocating too much in probe iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered iio: proximity: as3935: fix iio_trigger_poll issue iio: proximity: as3935: fix AS3935_INT mask iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe iio: proximity: as3935: recalibrate RCO after resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.12-rc5 They are for some reported issues in the chipidea and gadget drivers. Nothing major. All have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing usb: gadget: udc: renesas_usb3: lock for PN_ registers access usb: gadget: udc: renesas_usb3: fix deadlock by spinlock usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling usb: gadget: f_mass_storage: Serialize wake and sleep execution usb: dwc2: add support for the DWC2 controller on Meson8 SoCs phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer usb: musb: dsps: keep VBUS on for host-only mode usb: chipidea: core: check before accessing ci_role in ci_role_show usb: chipidea: debug: check before accessing ci_role phy: qcom-qmp: fix return value check in qcom_qmp_phy_create() usb: chipidea: udc: fix NULL pointer dereference if udc_start failed usb: chipidea: imx: Do not access CLKONOFF on i.MX51
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of user visible fixes (excepting one format string change). Four of the qla2xxx fixes only affect the firmware dump path, but it's still important to the enterprise. The rest are various NULL pointer crash conditions or outright driver hangs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: libcxgbi: in error case RST tcp conn scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled scsi: qla2xxx: Fix extraneous ref on sp's after adapter break scsi: lpfc: prevent potential null pointer dereference scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort() scsi: lpfc: nvmet_fc: fix format string scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx scsi: qla2xxx: Fix mailbox pointer error in fwdump capture scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() scsi: qla2xxx: don't disable a not previously enabled PCI device
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "We expanded the device-dax fs type in 4.12 to be a generic provider of a struct dax_device with an embedded inode. However, Sasha found some basic negative testing was not run to verify that this fs cleanly handles being mounted directly. Note that the fresh rebase was done to remove an unnecessary Cc: <stable> tag, but this commit otherwise had a build success notification from the 0day robot." * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix 'dax' device filesystem inode destruction crash
-