Skip to content

L
linux
Switch branch/tag
  1. 28 Jun, 2021 6 commits
  3. 25 Jun, 2021 3 commits
    • Petr Oros's avatar
      Revert "be2net: disable bh with spin_lock in be_process_mcc" · d6765985
      Petr Oros authored 
      Patch was based on wrong presumption that be_poll can be called only
from bh context. It reintroducing old regression (also reverted) and
causing deadlock when we use netconsole with benet in bonding.

Old revert: commit 072a9c48 ("netpoll: revert 6bdb7fe3 and fix
be_poll() instead")

[  331.269715] bond0: (slave enp0s7f0): Releasing backup interface
[  331.270121] CPU: 4 PID: 1479 Comm: ifenslave Not tainted 5.13.0-rc7+ #2
[  331.270122] Call Trace:
[  331.270122] [c00000001789f200] [c0000000008c505c] dump_stack+0x100/0x174 (unreliable)
[  331.270124] [c00000001789f240] [c008000001238b9c] be_poll+0x64/0xe90 [be2net]
[  331.270125] [c00000001789f330] [c000000000d1e6e4] netpoll_poll_dev+0x174/0x3d0
[  331.270127] [c00000001789f400] [c008000001bc167c] bond_poll_controller+0xb4/0x130 [bonding]
[  331.270128] [c00000001789f450] [c000000000d1e624] netpoll_poll_dev+0xb4/0x3d0
[  331.270129] [c00000001789f520] [c000000000d1ed88] netpoll_send_skb+0x448/0x470
[  331.270130] [c00000001789f5d0] [c0080000011f14f8] write_msg+0x180/0x1b0 [netconsole]
[  331.270131] [c00000001789f640] [c000000000230c0c] console_unlock+0x54c/0x790
[  331.270132] [c00000001789f7b0] [c000000000233098] vprintk_emit+0x2d8/0x450
[  331.270133] [c00000001789f810] [c000000000234758] vprintk+0xc8/0x270
[  331.270134] [c00000001789f850] [c000000000233c28] printk+0x40/0x54
[  331.270135] [c00000001789f870] [c000000000ccf908] __netdev_printk+0x150/0x198
[  331.270136] [c00000001789f910] [c000000000ccfdb4] netdev_info+0x68/0x94
[  331.270137] [c00000001789f950] [c008000001bcbd70] __bond_release_one+0x188/0x6b0 [bonding]
[  331.270138] [c00000001789faa0] [c008000001bcc6f4] bond_do_ioctl+0x42c/0x490 [bonding]
[  331.270139] [c00000001789fb60] [c000000000d0d17c] dev_ifsioc+0x17c/0x400
[  331.270140] [c00000001789fbc0] [c000000000d0db70] dev_ioctl+0x390/0x890
[  331.270141] [c00000001789fc10] [c000000000c7c76c] sock_do_ioctl+0xac/0x1b0
[  331.270142] [c00000001789fc90] [c000000000c7ffac] sock_ioctl+0x31c/0x6e0
[  331.270143] [c00000001789fd60] [c0000000005b9728] sys_ioctl+0xf8/0x150
[  331.270145] [c00000001789fdb0] [c0000000000336c0] system_call_exception+0x160/0x2f0
[  331.270146] [c00000001789fe10] [c00000000000d35c] system_call_common+0xec/0x278
[  331.270147] --- interrupt: c00 at 0x7fffa6c6ec00
[  331.270147] NIP:  00007fffa6c6ec00 LR: 0000000105c4185c CTR: 0000000000000000
[  331.270148] REGS: c00000001789fe80 TRAP: 0c00   Not tainted  (5.13.0-rc7+)
[  331.270148] MSR:  800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE>  CR: 28000428  XER: 00000000
[  331.270155] IRQMASK: 0
[  331.270156] GPR00: 0000000000000036 00007fffd494d5b0 00007fffa6d57100 0000000000000003
[  331.270158] GPR04: 0000000000008991 00007fffd494d6d0 0000000000000008 00007fffd494f28c
[  331.270161] GPR08: 0000000000000003 0000000000000000 0000000000000000 0000000000000000
[  331.270164] GPR12: 0000000000000000 00007fffa6dfa220 0000000000000000 0000000000000000
[  331.270167] GPR16: 0000000105c44880 0000000000000000 0000000105c60088 0000000105c60318
[  331.270170] GPR20: 0000000105c602c0 0000000105c44560 0000000000000000 0000000000000000
[  331.270172] GPR24: 00007fffd494dc50 00007fffd494d6a8 0000000105c60008 00007fffd494d6d0
[  331.270175] GPR28: 00007fffd494f27e 0000000105c6026c 00007fffd494f284 0000000000000000
[  331.270178] NIP [00007fffa6c6ec00] 0x7fffa6c6ec00
[  331.270178] LR [0000000105c4185c] 0x105c4185c
[  331.270179] --- interrupt: c00

This reverts commit d0d006a4.

Fixes: d0d006a4 ("be2net: disable bh with spin_lock in be_process_mcc")
Signed-off-by: default avatarPetr Oros <poros@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d6765985
    • Bailey Forrest's avatar
      gve: Fix swapped vars when fetching max queues · 1db1a862
      Bailey Forrest authored 
      Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: default avatarBailey Forrest <bcf@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1db1a862
    • Nicolas Dichtel's avatar
      dev_forward_skb: do not scrub skb mark within the same name space · ff70202b
      Nicolas Dichtel authored 
      The goal is to keep the mark during a bpf_redirect(), like it is done for
legacy encapsulation / decapsulation, when there is no x-netns.
This was initially done in commit 213dd74a ("skbuff: Do not scrub skb
mark within the same name space").

When the call to skb_scrub_packet() was added in dev_forward_skb() (commit
8b27f277 ("skb: allow skb_scrub_packet() to be used by tunnels")), the
second argument (xnet) was set to true to force a call to skb_orphan(). At
this time, the mark was always cleanned up by skb_scrub_packet(), whatever
xnet value was.
This call to skb_orphan() was removed later in commit
9c4c3252 ("skbuff: preserve sock reference when scrubbing the skb.").
But this 'true' stayed here without any real reason.

Let's correctly set xnet in ____dev_forward_skb(), this function has access
to the previous interface and to the new interface.
Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ff70202b
  5. 24 Jun, 2021 24 commits
  7. 23 Jun, 2021 5 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · c2f5c57d
      David S. Miller authored 
      Daniel Borkmann says:

====================
pull-request: bpf 2021-06-23

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 6 day(s) which contain
a total of 13 files changed, 137 insertions(+), 64 deletions(-).

Note that when you merge net into net-next, there is a small merge conflict
between 9f2470fb ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf
with c49661aa ("skmsg: Remove unused parameters of sk_msg_wait_data()")
from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data()
and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take
tcp_msg_wait_data() and remove err parameter from the function, iii) for
net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data()
implementation and its prototype in header.

The main changes are:

1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend.

2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski.

3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang.

4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar.

5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson.

6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2f5c57d
    • Eric Dumazet's avatar
      ipv6: exthdrs: do not blindly use init_net · bcc3f2a8
      Eric Dumazet authored 
      I see no reason why max_dst_opts_cnt and max_hbh_opts_cnt
are fetched from the initial net namespace.

The other sysctls (max_dst_opts_len & max_hbh_opts_len)
are in fact already using the current ns.

Note: it is not clear why ipv6_destopt_rcv() use two ways to
get to the netns :

 1) dev_net(dst->dev)
    Originally used to increment IPSTATS_MIB_INHDRERRORS

 2) dev_net(skb->dev)
     Tom used this variant in his patch.

Maybe this calls to use ipv6_skb_net() instead ?

Fixes: 47d3d7ac ("ipv6: Implement limits on Hop-by-Hop and Destination options")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bcc3f2a8
    • Jian-Hong Pan's avatar
      net: bcmgenet: Fix attaching to PYH failed on RPi 4B · b2ac9800
      Jian-Hong Pan authored 
      The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late.
So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads
GENET fail to attach the PHY as following log:

bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
...
could not attach to PHY
bcmgenet fd580000.ethernet eth0: failed to connect to PHY
uart-pl011 fe201000.serial: no DMA platform data
libphy: bcmgenet MII bus: probed
...
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus

This patch adds the soft dependency to load mdio-bcm-unimac module
before genet module to avoid the issue.

Fixes: 9a4e7969 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485Signed-off-by: default avatarJian-Hong Pan <jhp@endlessos.org>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b2ac9800
    • Di Zhu's avatar
      bonding: allow nesting of bonding device · 4d293fe1
      Di Zhu authored 
      The commit 3c9ef511 ("bonding: avoid adding slave device with
IFF_MASTER flag") fix a crash when add slave device with IFF_MASTER,
but it rejects the scenario of nested bonding device.

As Eric Dumazet described: since there indeed is a usage scenario about
nesting bonding, we should not break it.

So we add a new judgment condition to allow nesting of bonding device.

Fixes: 3c9ef511 ("bonding: avoid adding slave device with IFF_MASTER flag")
Suggested-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: default avatarDi Zhu <zhudi21@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4d293fe1
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 7c2becf7
      David S. Miller authored 
      Steffen Klassert says:

====================
pull request (net): ipsec 2021-06-23

1) Don't return a mtu smaller than 1280 on IPv6 pmtu discovery.
   From Sabrina Dubroca

2) Fix seqcount rcu-read side in xfrm_policy_lookup_bytype
   for the PREEMPT_RT case. From Varad Gautam.

3) Remove a repeated declaration of xfrm_parse_spi.
   From Shaokun Zhang.

4) IPv4 beet mode can't handle fragments, but IPv6 does.
   commit 68dc022d ("xfrm: BEET mode doesn't support
   fragments for inner packets") handled IPv4 and IPv6
   the same way. Relax the check for IPv6 because fragments
   are possible here. From Xin Long.

5) Memory allocation failures are not reported for
   XFRMA_ENCAP and XFRMA_COADDR in xfrm_state_construct.
   Fix this by moving both cases in front of the function.

6) Fix a missing initialization in the xfrm offload fallback
   fail case for bonding devices. From Ayush Sawal.

Please pull or let me know if there are problems.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7c2becf7
  9. 22 Jun, 2021 2 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · f4b29d2e
      David S. Miller authored 
      Pablo Neira Ayuso says

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Nicolas Dichtel updates MAINTAINERS file to add Netfilter IRC channel.

2) Skip non-IPv6 packets in nft_exthdr.

3) Skip non-TCP packets in nft_osf.

4) Skip non-TCP/UDP packets in nft_tproxy.

5) Memleak in hardware offload infrastructure when counters are used
   for first time in a rule.

6) The VLAN transfer routine must use FLOW_DISSECTOR_KEY_BASIC instead
   of FLOW_DISSECTOR_KEY_CONTROL. Moreover, make a more robust check
   for 802.1q and 802.1ad to restore simple matching on transport
   protocols.

7) Fix bogus EPERM when listing a ruleset when table ownership flag
   is set on.

8) Honor table ownership flag when table is referenced by handle.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f4b29d2e
    • John Fastabend's avatar
      bpf: Fix null ptr deref with mixed tail calls and subprogs · 7506d211
      John Fastabend authored 
      The sub-programs prog->aux->poke_tab[] is populated in jit_subprogs() and
then used when emitting 'BPF_JMP|BPF_TAIL_CALL' insn->code from the
individual JITs. The poke_tab[] to use is stored in the insn->imm by
the code adding it to that array slot. The JIT then uses imm to find the
right entry for an individual instruction. In the x86 bpf_jit_comp.c
this is done by calling emit_bpf_tail_call_direct with the poke_tab[]
of the imm value.

However, we observed the below null-ptr-deref when mixing tail call
programs with subprog programs. For this to happen we just need to
mix bpf-2-bpf calls and tailcalls with some extra calls or instructions
that would be patched later by one of the fixup routines. So whats
happening?

Before the fixup_call_args() -- where the jit op is done -- various
code patching is done by do_misc_fixups(). This may increase the
insn count, for example when we patch map_lookup_up using map_gen_lookup
hook. This does two things. First, it means the instruction index,
insn_idx field, of a tail call instruction will move by a 'delta'.

In verifier code,

 struct bpf_jit_poke_descriptor desc = {
  .reason = BPF_POKE_REASON_TAIL_CALL,
  .tail_call.map = BPF_MAP_PTR(aux->map_ptr_state),
  .tail_call.key = bpf_map_key_immediate(aux),
  .insn_idx = i + delta,
 };

Then subprog start values subprog_info[i].start will be updated
with the delta and any poke descriptor index will also be updated
with the delta in adjust_poke_desc(). If we look at the adjust
subprog starts though we see its only adjusted when the delta
occurs before the new instructions,

        /* NOTE: fake 'exit' subprog should be updated as well. */
        for (i = 0; i <= env->subprog_cnt; i++) {
                if (env->subprog_info[i].start <= off)
                        continue;

Earlier subprograms are not changed because their start values
are not moved. But, adjust_poke_desc() does the offset + delta
indiscriminately. The result is poke descriptors are potentially
corrupted.

Then in jit_subprogs() we only populate the poke_tab[]
when the above insn_idx is less than the next subprogram start. From
above we corrupted our insn_idx so we might incorrectly assume a
poke descriptor is not used in a subprogram omitting it from the
subprogram. And finally when the jit runs it does the deref of poke_tab
when emitting the instruction and crashes with below. Because earlier
step omitted the poke descriptor.

The fix is straight forward with above context. Simply move same logic
from adjust_subprog_starts() into adjust_poke_descs() and only adjust
insn_idx when needed.

[   82.396354] bpf_testmod: version magic '5.12.0-rc2alu+ SMP preempt mod_unload ' should be '5.12.0+ SMP preempt mod_unload '
[   82.623001] loop10: detected capacity change from 0 to 8
[   88.487424] ==================================================================
[   88.487438] BUG: KASAN: null-ptr-deref in do_jit+0x184a/0x3290
[   88.487455] Write of size 8 at addr 0000000000000008 by task test_progs/5295
[   88.487471] CPU: 7 PID: 5295 Comm: test_progs Tainted: G          I       5.12.0+ #386
[   88.487483] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[   88.487490] Call Trace:
[   88.487498]  dump_stack+0x93/0xc2
[   88.487515]  kasan_report.cold+0x5f/0xd8
[   88.487530]  ? do_jit+0x184a/0x3290
[   88.487542]  do_jit+0x184a/0x3290
 ...
[   88.487709]  bpf_int_jit_compile+0x248/0x810
 ...
[   88.487765]  bpf_check+0x3718/0x5140
 ...
[   88.487920]  bpf_prog_load+0xa22/0xf10

Fixes: a748c697 ("bpf: propagate poke descriptors to subprograms")
Reported-by: default avatarJussi Maki <joamaki@gmail.com>
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Reviewed-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      7506d211
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7